共查询到20条相似文献,搜索用时 750 毫秒
1.
Reitsma MG 《The Review of scientific instruments》2007,78(10):106102
A proof-of-concept study is presented for a prototype atomic force microscope (AFM) cantilever and associated calibration procedure that provide a path for quantitative friction measurement using a lateral force microscope (LFM). The calibration procedure is based on the method proposed by Feiler et al. [Rev. Sci. Instrum. 71, 2746 (2000)] but allows for calibration and friction measurements to be carried out in situ and with greater precision. The modified AFM cantilever is equipped with lateral lever arms that facilitate the application of normal and lateral forces, comparable to those acting in a typical LFM friction experiment. The technique allows the user to select acceptable precision via a potentially unlimited number of calibration measurements across the full working range of the LFM photodetector. A microfabricated version of the cantilever would be compatible with typical commercial AFM instrumentation and allow for common AFM techniques such as topography imaging and other surface force measurements to be performed. 相似文献
2.
In situ observation of freeze-fractured and deep-etched red blood cells with a high-vacuum low-temperature atomic force microscope 总被引:1,自引:0,他引:1
A high-vacuum low-temperature atomic force microscope (AFM) for the direct observation of freeze-fracture samples has been developed. This AFM has a freeze-fracture mechanism inside the vacuum chamber. With this AFM it is possible to observe the fractured surface directly without both fabricating a replica and exposure to the ambient atmosphere. Both sandwich and knife fracture methods have been achieved to obtain freeze-fracture surfaces and after deep etching. A fine structure of the fractured red blood cell membrane has been observed using both methods. These are relatively quick and easy methods for the observation of freeze-fracture surfaces without introducing replica artifacts. 相似文献
3.
By controlling the interaction between the atomic force microscope tip and mica, patterns of different sizes and shape have been produced on the surface of mica. Using these operator-constructed patterns as a reliable marker, the original scanned sample location can be re-located and imaged again on the same mica surface by atomic force microscopy (AFM). This location technique can be used to find the same object again even if the sample was removed from the AFM instrument or the sample was imaged in a different mode. 相似文献
4.
We describe the design and performance of a quasi in situ scanning force microscope with an automatic operated reaction chamber. The design provides a repetitive hermetically sealed sample environment for successive processing. The reaction chamber is based on a combination of a flexure-guided cover, a piezo-positioning system and a force applicator system. An axial force seals the cover against the reactor enabling flow-through applications at low pressure, ambient pressure, or elevated pressure. The position stability of the sample relative to the probe is characterized and a full automated operation of the instrument is explored by the alignment of an ABC terblock copolymer thin film undergoing solvent vapor annealing in the presence of a high electric field. Due to the high electric field strength and the sharp scanning force microscope tip it is impossible to perform in situ scanning in the presence of the electric field. 相似文献
5.
A commercial atomic force microscope (AFM), originally designed for operation in ambient conditions, was placed inside a compact aluminum chamber, which can be pumped down to high vacuum levels or filled with a desired gaseous atmosphere, including humidity, up to normal pressure. The design of this environmental AFM is such that minimal intrusion is made to the original setup, which can be restored easily. The performance inside the environmental chamber is similar to the original version. 相似文献
6.
Tranvouez E Boer-Duchemin E Comtet G Dujardin G 《The Review of scientific instruments》2007,78(11):115103
We have developed a simple algorithm to overcome the problem of thermal drift in an atomic force microscope (AFM) operating under ambient conditions. Using our method, we demonstrate that the AFM tip remains above a 5-nm-high and 50-nm-long CdSe nanorod for more than 90 min despite the thermal drift present (6 nm/min). We have applied our drift compensation technique to the AFM manipulation of CdSe colloidal nanorods lying horizontally on a highly oriented pyrolytic graphite surface. Since we have precise control over the position of the AFM tip relative to the nanorod, we can choose to either translate or rotate the rod by changing the location of the tip-rod interaction point. 相似文献
7.
Huber HP Moertelmaier M Wallis TM Chiang CJ Hochleitner M Imtiaz A Oh YJ Schilcher K Dieudonne M Smoliner J Hinterdorfer P Rosner SJ Tanbakuchi H Kabos P Kienberger F 《The Review of scientific instruments》2010,81(11):113701
A scanning microwave microscope (SMM) for spatially resolved capacitance measurements in the attofarad-to-femtofarad regime is presented. The system is based on the combination of an atomic force microscope (AFM) and a performance network analyzer (PNA). For the determination of absolute capacitance values from PNA reflection amplitudes, a calibration sample of conductive gold pads of various sizes on a SiO(2) staircase structure was used. The thickness of the dielectric SiO(2) staircase ranged from 10 to 200 nm. The quantitative capacitance values determined from the PNA reflection amplitude were compared to control measurements using an external capacitance bridge. Depending on the area of the gold top electrode and the SiO(2) step height, the corresponding capacitance values, as measured with the SMM, ranged from 0.1 to 22 fF at a noise level of ~2 aF and a relative accuracy of 20%. The sample capacitance could be modeled to a good degree as idealized parallel plates with the SiO(2) dielectric sandwiched in between. The cantilever/sample stray capacitance was measured by lifting the tip away from the surface. By bringing the AFM tip into direct contact with the SiO(2) staircase structure, the electrical footprint of the tip was determined, resulting in an effective tip radius of ~60 nm and a tip-sample capacitance of ~20 aF at the smallest dielectric thickness. 相似文献
8.
The atomic force microscope (AFM) is now an established and valuable tool for the study of biological macromolecules in aqueous environments. In this paper we form a patterned boundary via the microcontact printing of individually isolated proteins, covalently attached to a solid support. We use this boundary to investigate electrostatic interactions that can occur between an AFM tip and a protein surface during imaging in solution. The observed height variations of the protein film are found to be a combination of not only structural considerations and thickness of the protein film, but also the repulsive contribution from electrostatic interactions between the AFM tip and the sample. These variations in measured heights of the protein surface can be described by Derjaguin, Landau, Verway, Overbeek (DLVO) theory. Our experimental results show that height measurements can be manipulated either negatively or positively by adjusting the pH and concentration of the electrolyte buffer that is utilised. 相似文献
9.
An add-on device is presented, which significantly expands the force measurement capabilities of the atomic force microscope (AFM). The device consists of a completely passive mechanism, which translates the vertical motion of the AFM tip in force measurements into a horizontal motion of two sample support pads. The advantage is that it is much easier to deposit microscopic samples from suspension onto flat surfaces than to attach them reliably between tip and a surface. The working-principle and the design of the device is comprehensively described and demonstrated on the example of collagen fibres with a diameter of a few μm. Well-defined tensile measurements in longitudinal direction were performed, showing that the tensile stiffness of collagen fibres from rat tail tendon decreases by a factor of 5 when rehydrated from a dried sample and slowly increases upon cross-linking with glutaraldehyde. 相似文献
10.
Amir Farrokh Payam M. Fathipour 《The International Journal of Advanced Manufacturing Technology》2013,65(5-8):957-966
The vibrational characteristics of an atomic force microscope (AFM) cantilever beam play a key role in dynamic mode of the atomic force microscope. As the oscillating AFM cantilever tip approaches the sample, the tip–sample interaction force influences the cantilever dynamics. In this paper, we present a detailed theoretical analysis of the frequency response and mode shape behavior of a cantilever beam in the dynamic mode subject to changes in the tip mass and the interaction regime between the AFM cantilever system and the sample. We consider a distributed parameter model for AFM and use Euler–Bernoulli method to derive an expression for AFM characteristics equation contains tip mass and interaction force terms. We study the frequency response of AFM cantilever under variations of interaction force between AFM tip and sample. Also, we investigate the effect of tip mass on the frequency response and also the quality factor and spring constant of each eigenmodes of AFM micro-cantilever. In addition, the mode shape analysis of AFM cantilever under variations of tip mass and interaction force is investigated. This will incorporate the presentation of explicit analytical expressions and numerical analysis. The results show that by considering the tip mass, the resonance frequencies of the cantilever are decreased. Also, the tip mass has a significant effect on the mode shape of the higher eigenmodes of the AFM cantilever. Moreover, tip mass affects the quality factor and spring constant of each modes. 相似文献
11.
A novel CCD‐monitored atomic force microscope (AFM) with optical vision and improved performances has been developed. Compact optical paths are specifically devised for both tip‐sample microscopic monitoring and cantilever's deflection detecting with minimized volume and optimal light‐amplifying ratio. The ingeniously designed AFM probe with such optical paths enables quick and safe tip‐sample approaching, convenient and effective tip‐sample positioning, and high quality image scanning. An image stitching method is also developed to build a wider‐range AFM image under monitoring. Experiments show that this AFM system can offer real‐time optical vision for tip‐sample monitoring with wide visual field and/or high lateral optical resolution by simply switching the objective; meanwhile, it has the elegant performances of nanometer resolution, high stability, and high scan speed. Furthermore, it is capable of conducting wider‐range image measurement while keeping nanometer resolution. Microsc. Res. Tech. 76:931–935, 2013. © 2013 Wiley Periodicals, Inc. 相似文献
12.
We report the guided self-assembly of nanoparticles to geometrically well-defined charge patterns written on a dielectric surface with the conductive tip of an atomic force microscope (AFM). Charges are deposited in 30-90-nm thick fluorocarbon layers by applying voltage pulses to the conductive AFM tip. The samples are being developed by dipping them into an organic suspension of silica nanoparticles. Coulomb forces draw the nanoparticles to the charge patterns. With this simple process, we achieve a resolution of about 800 nm. 相似文献
13.
Liquid 1-decanethiol was confined on an atomic force microscope (AFM) tip apex and the effect was investigated by measuring amplitude-distance curves in dynamic force mode. Within the working distance in the dynamic force mode AFM, the thiol showed strong interactions bridging between a gold-coated probe tip and a gold-coated Si substrate, resulting in unstable amplitude and noisy AFM images. We show that under such a situation, the amplitude change is dominated by the extra forces induced by the active material loaded on the tip apex, overwhelming the amplitude change caused by the geometry of the sample surface, thus resulting in noise in the image the tip collects. We also show that such a contaminant may be removed from the apex by pushing the tip into a material soft enough to avoid damage to the tip. 相似文献
14.
Physiology and pathology have a big deal on tissue morphology, and the intrinsic spatial resolution of an atomic force microscope (AFM) is able to observe ultrastructural details. In order to investigate cellular and subcellular structures in histological sections with the AFM, we used a new simple method for sample preparation, i.e. chemical etching of semithin sections from epoxy resin-embedded specimens: such treatment appears to melt the upper layers of the embedding resin; thus, removing the superficial roughness caused by the edge of the microtome knife and bringing into high relief the biological structures hidden in the bulk. Consecutive ultrathin sections embedded in epoxy resin were observed with a transmission electron microscope (TEM) to compare the different imaging properties on the same specimen sample. In this paper we report, as an example, our AFM and TEM images of two different tissue specimens, rat pancreas and skeletal muscle fibres, showing that most of the inner details are visible with the AFM. These results suggest that chemical etching of histological sections may be a simple, fast and cost-effective method for AFM imaging with ultrastructural resolution. 相似文献
15.
Stiffness-load curves obtained in quantitative atomic force acoustic microscopy (AFAM) measurements depend on both the elastic properties of the sample and the geometry of the atomic force microscope (AFM) tip. The geometry of silicon AFM tips changes when used in contact mode, affecting measurement accuracy. To study the influence of tip geometry, we subjected ten AFM tips to the same series of AFAM measurements. Changes in tip shape were observed in the scanning electron microscope (SEM) between individual AFAM tests. Because all of the AFAM measurements were performed on the same sample, variations in AFAM stiffness-load curves were attributed to differences in tip geometry. Contact-mechanics models that assumed simple tip geometries were used to analyze the AFAM data, but the calculated values for tip dimensions did not agree with those provided by SEM images. Therefore, we used a power-law approach that allows for a nonspherical tip geometry. We found that after several AFAM measurements, the geometry of the tips at the very end is intermediate between those of a flat punch and a hemisphere. These results indicate that the nanoscale tip-sample contact cannot easily be described in terms of simple, ideal geometries. 相似文献
16.
17.
We report the design of an improved electrochemical cell for atomic force microscope measurements in corrosive electrochemical environments. Our design improvements are guided by experimental requirements for studying corrosive reactions such as selective dissolution, dealloying, pitting corrosion, and∕or surface and interface forces at electrified interfaces. Our aim is to examine some of the limitations of typical electrochemical scanning probe microscopy (SPM) experiments and in particular to outline precautions and cell-design elements, which must necessarily be taken into account in order to obtain reliable experimental results. In particular, we discuss electrochemical requirements for typical electrochemical SPM experiments and introduce novel design features to avoid common issues such as crevice formations; we discuss the choice of electrodes and contaminations from ions of reference electrodes. We optimize the cell geometry and introduce standard samples for electrochemical AFM experiments. We have tested the novel design by performing force-distance spectroscopy as a function of the applied electrochemical potential between a bare gold electrode surface and a SAM-coated AFM tip. Topography imaging was tested by studying the well-known dealloying process of a Cu(3)Au(111) surface up to the critical potential. Our design improvements should be equally applicable to in situ electrochemical scanning tunneling microscope cells. 相似文献
18.
Albers BJ Liebmann M Schwendemann TC Baykara MZ Heyde M Salmeron M Altman EI Schwarz UD 《The Review of scientific instruments》2008,79(3):033704
We present the design and first results of a low-temperature, ultrahigh vacuum scanning probe microscope enabling atomic resolution imaging in both scanning tunneling microscopy (STM) and noncontact atomic force microscopy (NC-AFM) modes. A tuning-fork-based sensor provides flexibility in selecting probe tip materials, which can be either metallic or nonmetallic. When choosing a conducting tip and sample, simultaneous STM/NC-AFM data acquisition is possible. Noticeable characteristics that distinguish this setup from similar systems providing simultaneous STM/NC-AFM capabilities are its combination of relative compactness (on-top bath cryostat needs no pit), in situ exchange of tip and sample at low temperatures, short turnaround times, modest helium consumption, and unrestricted access from dedicated flanges. The latter permits not only the optical surveillance of the tip during approach but also the direct deposition of molecules or atoms on either tip or sample while they remain cold. Atomic corrugations as low as 1 pm could successfully be resolved. In addition, lateral drifts rates of below 15 pm/h allow long-term data acquisition series and the recording of site-specific spectroscopy maps. Results obtained on Cu(111) and graphite illustrate the microscope's performance. 相似文献
19.
A combined scanning near field optical/atomic force microscope (AFM) is used to obtain surface force measurements between a near field sensing tip and a tapered optical fibre surface, whilst simultaneously detecting the intensity of the evanescent field emanating from the fibre. The tapered optical fibre acts as a compliant sample to demonstrate the possible use of the near field intensity measurement system in determining 'real' surface separations from normal AFM surface force measurements at sub-nanometer resolution between deformable surfaces. 相似文献
20.
The carbon nano-tube (CNT) has ideal properties for atomic force microscope (AFM) tips. We assembled a CNT using 2 three-axial manipulators in a scanning electron microscope (SEM) chamber. In this process, the length and angle of the CNT were adjusted by observing the SEM image, after which the CNT was glued by amorphouscarbon. The results of performance are as follows. The lifetime of the CNT tip proved to be 5 times better than that of the silicon tip when continuously measuring the micro-roughness of a Czochralski (Cz) P-type (100) silicon wafer. The CNT tip is able to trace a narrow space (width less than 1 microm) better than the conventional silicon tip because of its high aspect ratio. The relationship between the observed image and CNT geometry is discussed herein. 相似文献