A Scalable Free‐Standing V2O5/CNT Film Electrode for Supercapacitors with a Wide Operation Voltage (1.6 V) in an Aqueous Electrolyte

While vanadium oxides have many attractive pseudocapacitive features for energy storage, their applications are severely limited by the poor electronic conductivity and low specific surface area. To overcome these limitations, a scalable, free‐standing film electrode composed of intertwined V₂O₅ nanowires and carbon nanotubes (CNTs) using a blade coating process has been prepared. The unique architecture of this hybrid electrode greatly facilitates electronic transport along CNTs while maintaining rapid ion diffusion within V₂O₅ nanowires and fast electron transfer across the V₂O₅/CNTs interfaces. When tested in a neutral aqueous electrolyte, this hybrid film electrode demonstrates a volumetric capacitance of ≈460 F cm^?3. Moreover, a symmetric capacitor based on two identical film electrodes displays a wide operation voltage window of 1.6 V, delivering a volumetric energy density as high as 41 Wh L^?1.     

Redox Poly-Counterion Doped Conducting Polymers for Pseudocapacitive Energy Storage

Conducting polymers (CPs) have been widely studied for electrochemical energy storage. However, the dopants in CPs are often electrochemically inactive, introducing “dead-weight” to the materials. Moreover, commercial-level electrode materials with high mass loadings (e.g., >10 mg cm⁻²) often encounter the problems of inferior electrical and ionic conductivity. Here, a redox-active poly-counterion doping concept is proposed to improve the electrochemical performance of CPs with ultra-high mass loadings. As a study prototype, heptamolybdate anion (Mo₇O₂₄⁶⁻) doped polypyrrole (PPy) is synthesized by electro-polymerization. A 2 mm thick PPy electrode with mass loading of ≈192 mg cm⁻² reaches a record-high areal capacitance of ≈47 F cm⁻², competitive gravimetric capacitance of 235 F g⁻¹, and volumetric capacitance of 235 F cm⁻³. With poly-counterion doping, the dopants also undergo redox reactions during charge/discharge processes, providing additional capacitance to the electrode. The interaction between polymer chains and the poly-counterions enhances the electrical conductivity of CPs. Besides, the poly-counterions with large steric hindrance could act as structural pillars and endow CPs with open structures for facile ion transport. The concept proposed in this work enriches the electrochemistry of CPs and promotes their practical applications.     

Lithium Ion Breathable Electrodes with 3D Hierarchical Architecture for Ultrastable and High‐Capacity Lithium Storage

Transition‐metal oxides show genuine potential in replacing state‐of‐the‐art carbonaceous anode materials in lithium‐ or sodium‐ion batteries because of their much higher theoretical capacity. However, they usually undergo massive volume change, which leads to numerous problems in both material and electrode levels, such as material pulverization, instable solid‐electrolyte interphase, and electrode failure. Here, it is demonstrated that lithium‐ion breathable hybrid electrodes with 3D architecture tackle all these problems, using a typical conversion‐type transition‐metal oxide, Fe₃O₄, of which nanoparticles are anchored onto 3D current collectors of Ni nanotube arrays (NTAs) and encapsulated by δ‐MnO₂ layers (Ni/Fe₃O₄@MnO₂). The δ‐MnO₂ layers reversibly switch lithium insertion/extraction of internal Fe₃O₄ nanoparticles and protect them against pulverizing and detaching from NTA current collectors, securing exceptional integrity retention and efficient ion/electron transport. The Ni/Fe₃O₄@MnO₂ electrodes exhibit superior cyclability and high‐capacity lithium storage (retaining ≈1450 mAh g^?1, ≈96% of initial value at 1 C rate after 1000 cycles).     

Enhanced Capacitive Energy Storage in Polyoxometalate‐Doped Polypyrrole

High‐performance batteries and supercapacitors require the molecular‐level linkage of charge transport components and charge storage components. This study shows how redox‐tunable Lindqvist‐type molecular metal oxide anions [V_nM _6–n O₁₉]^{(2+n )?} (M = W(VI) or Mo(VI); n = 0, 1, 2) can be incorporated in cationic polypyrrole (PPy) conductive polymer films by means of electrochemical polymerization. Electron microscopy and (spectro‐)electrochemistry show that the electroactivity and morphology of the composites can be tuned by Lindqvist anion incorporation. Reductive electrochemical “activation” of the Lindqvist–PPy composites leads to significantly increased electrical capacitance (range: ≈25–38 F g^?1, increase up to ≈25×), highlighting that this general synthetic route gives access to promising capacitive materials with suitable long‐term stability. Electrochemical, electron microscopic, and Raman spectroscopic analyses together with density functional theory (DFT) calculations provide molecular‐level insight into the effects of Lindqvist anion incorporation in PPy films and their role during reductive activation. The study therefore provides fundamental understanding of the principles governing the bottom‐up integration of molecular components into nanostructured composites for electrochemical energy storage.     

Organic/Inorganic Hybrid Nanochannels Based on Polypyrrole‐Embedded Alumina Nanopore Arrays: pH‐ and Light‐Modulated Ion Transport

Inspired by the asymmetric structure and responsive ion transport in biological ion channels, organic/inorganic hybrid artificial nanochannels exhibiting pH‐modulated ion rectification and light‐regulated ion flux have been constructed by introducing conductive polymer into porous nanochannels. The hybrid nanochannels are achieved by partially modifying alumina (Al₂O₃) nanopore arrays with polypyrrole (PPy) layer using electrochemical polymerization, which results in an asymmetric component distribution. The protonation and deprotonation of Al₂O₃ and PPy upon pH variation break the surface charge continuity, which contributes to the pH‐tunable ion rectification. The ionic current rectification ratio is affected substantially by the pH value of electrolyte and the pore size of nanochannels. Furthermore, the holes (positive charges) in PPy layer induced by the cooperative effect of light and protons are used to regulate the ionic flux through the nanochannels, which results in a light‐responsive ion current. The magnitude of responsive ionic current could be amplified by optimizing this cooperation. This new type of stimuli‐responsive PPy/Al₂O₃ hybrid nanochannels features advantages of unique optical and electric properties from conducting PPy and high mechanical performance from porous Al₂O₃ membrane, which provide a platform for creating smart nanochannels system.     

Redox Capacitor to Establish Bio‐Device Redox‐Connectivity

Electronic devices process information and transduce energy with electrons, while biology performs such operations with ions and chemicals. To establish bio‐device connectivity, we fabricate a redox‐capacitor film from a polysaccharide (i.e., chitosan) and a redox‐active catechol. We report that these films are rapidly and repeatedly charged and discharged electrochemically via a redox‐cycling mechanism in which mediators shuttle electrons between the electrode and film (capacitance ≈ 40 F/g or 2.9 mF/cm²). Further, charging and discharging can be executed under bio‐relevant conditions. Enzymatic‐charging is achieved by electron‐transfer from glucose to the film via an NADPH‐mediated redox‐cycling mechanism. Discharging occurs by electron‐donation to O₂ to generate H₂O₂ that serves as substrate for peroxidase‐mediated biochemical reactions. Thus, these films offer the capability of inter‐converting electrochemical and biochemical inputs/outputs. Among potential applications, we anticipate that catechol–chitosan redox‐capacitor films could serve as circuit elements for molecular logic operations or for transducing bio‐based chemical energy into electricity.     

Carbon‐Nanotube‐Cored Cobalt Porphyrin as a 1D Nanohybrid Strategy for High‐Performance Lithium‐Ion Battery Anodes

Redox‐active organic electrode materials have garnered considerable interest as an emerging alternative to currently widespread inorganic‐(or metal)‐based counterparts in lithium‐ion batteries (LIBs). Practical use of these materials, however, has posed a challenge due to their electrically insulating nature, limited specific capacity, and poor electrochemical durability. Here, a new class of multiwalled‐carbon‐nanotube‐(MWCNT)‐cored, meso‐tetrakis(4‐carboxyphenyl)porphyrinato cobalt (CoTCPP) is demonstrated as a 1D nanohybrid (denoted as CC‐nanohybrid) strategy to develop an advanced LIB anode. CoTCPP, which is one of the metalloporphyrins having multielectron redox activities, shows strong noncovalent interactions with MWCNTs due to its conjugated π‐bonds, resulting in successful formation of the CC‐nanohybrids. The structural uniqueness of the CC‐nanohybrid facilitates electron transport and electrolyte accessibility, thereby improving their redox kinetics. Inspired by the 1D structure of the CC‐nanohybrid, all‐fibrous nanomat anode sheets are fabricated through concurrent electrospraying/electrospinning processes. The resulting nanomat anode sheets, driven by their 3D bicontinuous ion/electron conduction pathways, provide fast lithiation/delithiation kinetics, eventually realizing the well‐distinguishable lithiation behavior of CoTCPP. Notably, the nanomat anode sheets exhibit exceptional electrochemical performance (≈226 mAh g_sheet ^?1 and >1500 cycles at 5 C) and mechanical flexibility that lie far beyond those achievable with conventional LIB anode technologies.     

Direct Ink Writing of Adjustable Electrochemical Energy Storage Device with High Gravimetric Energy Densities

3D printing graphene aerogel with periodic microlattices has great prospects for various practical applications due to their low density, large surface area, high porosity, excellent electrical conductivity, good elasticity, and designed lattice structures. However, the low specific capacitance limits their development in energy storage fields due to the stacking of graphene. Therefore, constructing a graphene‐based 2D materials hybridization aerogel that consists of the pseduocapacitive substance and graphene material is necessary for enhancing electrochemical performance. Herein, 3D printing periodic graphene‐based composite hybrid aerogel microlattices (HAMs) are reported via 3D printing direct ink writing technology. The rich porous structure, high electrical conductivity, and highly interconnected networks of the HAMs aid electron and ion transport, further enabling excellent capacitive performance for supercapacitors. An asymmetric supercapacitor device is assembled by two different 4‐mm‐thick electrodes, which can yield high gravimetric specific capacitance (C_g) of 149.71 F g^?1 at a current density of 0.5 A g^?1 and gravimetric energy density (E_g) of 52.64 Wh kg^?1, and retains a capacitance retention of 95.5% after 10 000 cycles. This work provides a general strategy for designing the graphene‐based mixed‐dimensional hybrid architectures, which can be utilized in energy storage fields.     

Pushing the Cycling Stability Limit of Polypyrrole for Supercapacitors

Polypyrrole (PPy) is a promising pseudocapacitive material for supercapacitor electrodes. However, its poor cycling stability is the major hurdle for its practical applications. Here a two‐prong strategy is demonstrated to stabilize PPy film by growing it on a functionalized partial‐exfoliated graphite (FEG) substrate and doping it with β‐naphthalene sulfonate anions (NS^?). The PPy electrode achieves a remarkable capacitance retention rate of 97.5% after cycling between ?0.8 and 0 V versus saturated calomel electrode for 10 000 cycles. Moreover, an asymmetric pseudocapacitor using the stabilized PPy film as anode also retains 97% of capacitance after 10 000 cycles, which is the best value reported for PPy‐based supercapacitors. The exceptional stability of PPy electrode can be attributed to two factors: 1) the flexible nature of FEG substrate accommodates large volumetric deformation and 2) the presence of immobile NS^? dopants suppresses the counterion drain effect during charge–discharge cycling.     

Flexible Cellulose Paper‐based Asymmetrical Thin Film Supercapacitors with High‐Performance for Electrochemical Energy Storage

Cellulose paper (CP)‐based asymmetrical thin film supercapacitors (ATFSCs) have been considered to be a novel platform for inexpensive and portable devices as the CP is low‐cost, lightweight, and can be rolled or folded into 3D configurations. However, the low energy density and poor cycle stability are serious bottlenecks for the development of CP‐based ATFSCs. Here, sandwich‐structured graphite/Ni/Co₂NiO₄‐CP is developed as positive electrode and the graphite/Ni/AC‐CP as negative electrode for flexible and high‐performance ATFSCs. The fabricated graphite/Ni/Co₂NiO₄‐CP positive electrode shows a superior areal capacitance (734 mF/cm² at 5 mV/s) and excellent cycling performance with ≈97.6% C_sp retention after 15 000 cycles. The fabricated graphite/Ni/AC‐CP negative electrode also exhibits large areal capacitance (180 mF/cm² at 5 mV/s) and excellent cycling performance with ≈98% C_sp retention after 15 000 cycles. The assembled ATFSCs based on the sandwich‐structured graphite/Ni/Co₂NiO₄‐CP as positive electrode and graphite/Ni/AC‐CP as negative electrode exhibit large volumetric C_sp (7.6 F/cm³ at 5 mV/s), high volumetric energy density (2.48 mWh/cm³, 80 Wh/kg), high volumetric power density (0.79 W/cm³, 25.6 kW/kg) and excellent cycle stability (less 4% C_sp loss after 20 000 cycles). This study shows an important breakthrough in the design and fabrication of high‐performance and flexible CP‐based electrodes and ATFSCs.     

Electrochemically Nanostructured Polyvinylferrocene/Polypyrrole Hybrids with Synergy for Energy Storage

Unconjugated redox polymers, such as polyvinylferrocene (PVF), have rarely been used for energy storage due to their low intrinsic conductivity. Conducting polymers with conjugated backbones, though conductive, may suffer from insufficient exposure to the electrolyte due to the often formed nonporous structures. The present work overcomes this limitation via simultaneous electropolymerization of pyrrole and electroprecipitation of PVF on electrode surfaces. This synthesis method relies on the π–π stacking interactions between the aromatic pyrrole monomers and the metallocene moieties of PVF. This fabrication process results in a highly porous polymer film, which enhances the ion accessibility to polypyrrole (PPy). PPy serves as a “molecular wire,” improving the electronic conductivity of the hybrid and the utilization efficiency of ferrocene. The PVF/PPy hybrid exhibited a specific capacitance of 514.1 F g^?1 _, which significantly exceeds those of PPy (27.3 F g^?1) and PVF (79.0 F g^?1), respectively. This approach offers an alternative to nanocarbon materials for improving the electronic conductivity of polymer hybrids, and suggests a new strategy for fabricating nanostructured polymer hybrids. This strategy can potentially be applied to various polymers with π‐conjugated backbones and redox polymers with metallocene moieties for applications such as energy storage, sensing, and catalysis.     

Sandwich,Vertical‐Channeled Thick Electrodes with High Rate and Cycle Performance

3D thick electrode design is a promising strategy to increase the energy density of lithium‐ion batteries but faces challenges such as poor rate and limited cycle life. Herein, a coassembly method is employed to construct low‐tortuosity, mechanically robust 3D thick electrodes. LiFe_0.7Mn_0.3PO₄ nanoplates (LFMP NPs) and graphene are aligned along the growth direction of ice crystals during freezing and assembled into sandwich frameworks with vertical channels, which prompts fast ion transfer within the entire electrode and reveals a 2.5‐fold increase in ion transfer performance as opposed to that of random structured electrodes. In the sandwich framework, LFMP NPs are entrapped in the graphene wall in a “plate‐on‐sheet” contact mode, which avoids the detachment of NPs during cycling and also constitutes electron transfer highways for the thick electrode. Such vertical‐channel sandwich electrodes with mass loading of 21.2 mg cm^?2 exhibit a superior rate capability (0.2C–20C) and ultralong cycle life (1000 cycles). Even under an ultrahigh mass loading of 72 mg cm^?2, the electrode still delivers an areal capacity up to 9.4 mAh cm^?2, ≈2.4 times higher than that of conventional electrodes. This study provides a novel strategy for designing thick electrodes toward high performance batteries.     

Cactus‐Like NiCoP/NiCo‐OH 3D Architecture with Tunable Composition for High‐Performance Electrochemical Capacitors

To effectively enhance the energy density and overall performance of electrochemical capacitors (ECs), a new strategy is demonstrated to increase both the intrinsic activity of the reaction sites and their density. Herein, nickel cobalt phosphides (NiCoP) with high activity and nickel cobalt hydroxides (NiCo‐OH) with good stability are purposely combined in a hierarchical cactus‐like structure. The hierarchical electrode integrates the advantages of 1D nanospines for effective charge transport, 2D nanoflakes for mechanical stability, and 3D carbon cloth substrate for flexibility. The NiCoP/NiCo‐OH 3D electrode delivers a high specific capacitance of ≈1100 F g^?1, which is around seven times higher than that of bare NiCo‐OH. It also possesses ≈90% capacitance retention after 1000 charge–discharge cycles. An asymmetric supercapacitor composed of NiCoP/NiCo‐OH cathode and metal–organic framework‐derived porous carbon anode achieves a specific capacitance of ≈100 F g^?1, high energy density of ≈34 Wh kg^?1, and excellent cycling stability. The cactus‐like NiCoP/NiCo‐OH 3D electrode presents a great potential for ECs and is promising for other functional applications such as catalysts and batteries.     

Nanoengineered Polypyrrole‐Coated Fe2O3@C Multifunctional Composites with an Improved Cycle Stability as Lithium‐Ion Anodes

Novel multifunctional composites composed of highly dispersed nanosized Fe₂O₃ particles, a tubular mesoporous carbon host, and a conductive polypyrrole (PPy) sealing layer are hierarchically assembled via two facile processes, including bottom‐up introduction of Fe₂O₃ nanoparticles in tubular mesoporous carbons, followed by in situ surface sealing with the PPy coating. Fe₂O₃ particles are well‐dispersed within the carbon matrix and PPy is spatially and selectively coated onto the external surface and the pore entrances of the Fe₂O₃@C composite, thereby bridging the composite particles together into a larger unit. As an anode material for Li‐ion batteries (LIBs), the PPy‐coated Fe₂O₃@C composite exhibits stable cycle performance. Additionally, the PPy‐coated Fe₂O₃@C composite also possesses fast electrode reaction kinetics, high Fe₂O₃ use efficiency, and large volumetric capacity. The excellent electrochemical performance is associated with a synergistic effect of the highly porous carbon matrix and the conducting PPy sealing layer. Such multifunctional configuration prevents the aggregation of NPs and maintains the structural integrity of active materials, in addition to effectively enhancing the electronic conductivity and warranting the stability of as‐formed solid electrolyte interface (SEI) films. This nanoengineering strategy might open new avenues for the design of other multifunctional composite architectures as electrode materials in order to achieve high‐performance LIBs.     

In Situ Preparation of Sandwich MoO3/C Hybrid Nanostructures for High‐Rate and Ultralong‐Life Supercapacitors

This work presents a design of sandwich MoO₃/C hybrid nanostructure via calcination of the dodecylamine‐intercalated layered α‐MoO₃, leading to the in situ production of the interlayered graphene layer. The sample with a high degree of graphitization of graphene layer and more interlayered void region exhibits the most outstanding energy storage performance. The obtained material is capable of delivering a high specific capacitance of 331 F g^?1 at a current density of 1 A g^?1 and retained 71% capacitance at 10 A g^?1. In addition, nearly no discharge capacity decay between 1000 and 10 000 continuous charge–discharge cycles is observed at a high current density of 10 A g^?1, indicating an excellent specific capacitance retention ability. The exceptional rate capability endows the electrode with a high energy density of 41.2 W h kg^?1 and a high power density of 12.0 kW kg^?1 simultaneously. The excellent performance is attributed to the sandwich hybrid nanostructure of MoO₃/C with broad ion diffusion pathway, low charge‐transfer resistance, and robust structure at high current density for long‐time cycling. The present work provides an insight into the fabrication of novel electrode materials with both enhanced rate capability and cyclability for potential use in supercapacitor and other energy storage devices.     

Mesoporous NiCo2O4 Nanowire Arrays Grown on Carbon Textiles as Binder‐Free Flexible Electrodes for Energy Storage

Binary metal oxides has been regarded as a promising class of electrode materials for high‐performance energy storage devices since it offers higher electrochemical activity and higher capacity than mono‐metal oxide. Besides, rational design of electrode architectures is an effective solution to further enhance electrochemical performance of energy storage devices. Here, the advanced electrode architectures consisting of carbon textiles uniformally covered by mesoporous NiCo₂O₄ nanowire arrays (NWAs) are successfully fabricated by a simple surfactant‐assisted hydrothermal method combined with a short post annealing treatment, which can be directly applied as self‐supported electrodes for energy storage devices, such as Li‐ion batteries, supercapacitors. The as‐prepared mesoporous NiCo₂O₄ nanowires consist of numerous highly crystalline nanoparticles, leaving a large number of mesopores to alleviate the volume change during the charge/discharge process. Electrode architectures presented here promise fast electron transport by direct connection to the growth substrate and facile ion diffusion path provided by both the abundant mesoporous structure in nanowires and large open spaces between neighboring nanowires, which ensures every nanowire participates in the ultrafast electrochemical reaction. Benefiting from the intrinsic materials and architectures features, the unique binder‐free NiCo₂O₄/carbon textiles exhibit high specific capacity/capacitance, excellent rate capability, and cycling stability.     

Three Birds,One‐Stone Strategy for Hybrid Microwave Synthesis of Ta and Sn Codoped Fe2O3@FeTaO4 Nanorods for Photo‐Electrochemical Water Oxidation

A “three birds, one stone” strategy is proposed to enhance the performance of hematite photoanode for photoelectrochemical water splitting. One‐pot hybrid microwave synthesis of Ta and Sn codoped Fe₂O₃@FeTaO₄ core–shell nanorods on F:SnO₂ substrate achieves three synergetic effects simultaneously: i) core–shell heterojunction formation to alleviate the significant electron–hole recombination; ii) preserved morphology of small‐diameter nanorods to provide a short hole diffusion distance; and iii) Ta and Sn codoping to enhance the electrical conductivity. These effects are not possible with conventional high temperature thermal synthesis in a furnace. As a result, core–shell Fe₂O₃@FeTaO₄ electrode with FeOOH cocatalyst achieves a photocurrent density of 2.86 mA cm^?2 at 1.23 V_RHE under AM 1.5 G simulated sunlight (100 mW cm^?2), which is ≈2.4 times higher than that of bare hematite (1.17 mA cm^?2). In addition, the FeOOH/Fe₂O₃@FeTaO₄ electrode exhibits a high surface charge separation efficiency of ≈85% and a modest bulk charge separation efficiency of ≈24%.     

In‐Plane Assembled Orthorhombic Nb2O5 Nanorod Films with High‐Rate Li+ Intercalation for High‐Performance Flexible Li‐Ion Capacitors

Organic hybrid supercapacitors that consist of a battery electrode and a capacitive electrode show greatly improved energy density, but their power density is generally limited by the poor rate capability of battery‐type electrodes. In addition, flexible organic hybrid supercapacitors are rarely reported. To address the above issues, herein an in‐plane assembled orthorhombic Nb₂O₅ nanorod film anode with high‐rate Li⁺ intercalation to develop a flexible Li‐ion hybrid capacitor (LIC) is reported. The binder‐/additive‐free film exhibits excellent rate capability (≈73% capacity retention with the rate increased from 0.5 to 20 C) and good cycling stability (>2500 times). Kinetic analyses reveal that the high rate performance is mainly attributed to the excellent in‐plane assembly of interconnected single‐crystalline Nb₂O₅ nanorods on the current collector, ensuring fast electron transport, facile Li‐ion migration in the porous film, and greatly reduced ion‐diffusion length. Using such a Nb₂O₅ film as anode and commercial activated carbon as cathode, a flexible LIC is designed. It delivers both high gravimetric and high volumetric energy/power densities (≈95.55 Wh kg^?1/5350.9 W kg^?1; 6.7 mW h cm^?3/374.63 mW cm^?3), surpassing previous typical Li‐intercalation electrode‐based LICs. Furthermore, this LIC device still keeps good electrochemical attributes even under serious bending states (30°–180°).     

A One‐Step and Binder‐Free Method to Fabricate Hierarchical Nickel‐Based Supercapacitor Electrodes with Excellent Performance

Research is currently being carried out in the search for alternative electrode materials to replace the expensive and toxic RuO₂‐based electrode. As a typical example, nickel oxide or hydroxide has been widely studied but the results are far from satisfactory. Here, using a facile one‐step anodization method, a hierarchical nickel compound (HNC) film with an interconnecting 3D nanoflake structure is obtained, providing large electrochemically active surface area and interconnecting nanoscale pore channels for ion transport. The HNC electrode demonstrates significantly improved capacitance, 70 times higher than the reported NiO‐TiO₂ nanotube array electrode with similar thickness. The charge/discharge kinetics are also superior, showing only a 24% capacitance reduction when the scan rate is increased by 50 times, as compared with the typical 70% capacitance reduction for pseudocapacitor electrodes under the same conditions. HNC exhibits an extraordinary excellent cycle life; capacitance increases to 115% after 4500 test cycles. Furthermore, because HNC is in intimate contact with the current collector, it is not necessary to use conducting agents or binders, which reduces the electrode weight and facilitates the electrode preparation process. The method is low cost, facile, scalable, additive free, and is promising for fabricating supercapacitor electrode with excellent performance.     

Enhanced Photoelectrochemical Energy Conversion in Ultrathin Film Photoanodes with Hierarchically Tailorable Mesoscale Structure

Highly porous electrode designs are often employed for photoelectrochemical energy conversion applications. “Inverse opal” structures generate high surface area electrodes to enhance light absorption in semiconductors with short carrier collection lengths, effectively increasing the optical depth of ultrathin film photoelectrodes. Here, the fabrication of hierarchically structured, “host–guest” photoelectrodes based on selective atomic layer deposition of ZnO in composite polystyrene–SiO₂ nanosphere films is described. Nanostructured scaffolds for ultrathin film photoanodes are prepared with a facile, continuously tunable solution‐phase synthesis. The characteristic length scales for absorption, carrier collection, and mass transport can be independently engineered into the electrode by choosing appropriate colloidal components for the composite scaffold. 20 nm ZnO photoanode layers based on the “host–guest” architecture exhibit roughly 500 times the photocurrent generated on an equivalent planar electrode and a 430% increase over a photoanode structured by a scaffold comprised of a close‐packed assembly of identical SiO₂ nanospheres. This results from an improved balance of reactant mass transport and the locus of light absorption throughout the electrode. This approach offers a facile route for preparing strategically nanostructured photoelectrodes based on strategies developed from more complex fabrication techniques.