Flexible Weaving Constructed Self‐Powered Pressure Sensor Enabling Continuous Diagnosis of Cardiovascular Disease and Measurement of Cuffless Blood Pressure

Pulse wave carries comprehensive information regarding the human cardiovascular system (CS), which is essential for directly capturing CS parameters. More importantly, cuffless blood pressure (BP) is one of the most critical markers in CS. Accurately measuring BP via the pulse wave for continuous and noninvasive diagnosis of a disease associated with hypertension remains a challenge and highly desirable. Here, a flexible weaving constructed self‐powered pressure sensor (WCSPS) is reported for measurement of the pulse wave and BP in a noninvasive manner. The WCSPS holds an ultrasensitivity of 45.7 mV Pa^?1 with an ultrafast response time of less than 5 ms, and no performance degradation is observed after up to 40 000 motion cycles. Furthermore, a low power consumption sensor system is developed for precisely monitoring pulse wave from the fingertip, wrist, ear, and ankles. A practical measurement is performed with 100 people with ages spanning from 24 to 82 years and different health statuses. The discrepancy between the measured BP results using the WCSPS and that provided by the commercial cuff‐based device is about 0.87–3.65%. This work demonstrates an efficient and cost‐effective way for human health monitoring, which would be a competitive alternative to current complex cardiovascular monitoring systems.     

Graphene‐Based Actuator with Integrated‐Sensing Function

Flexible actuators have important applications in artificial muscles, robotics, optical devices, and so on. However, most of the conventional actuators have only actuation function, lacking in real‐time sensing signal feedbacks. Here, to break the limitation and add functionality in conventional actuators, a graphene‐based actuator with integrated‐sensing function is reported, which avoids the dependence on image post‐processing for actuation detection and realizes real‐time measurement of the shape‐deformation amplitudes of the actuator. The actuator is able to show a large bending actuation (curvature of 1.1 cm^?1) based on a dual‐mode actuation mechanism when it is driven by near infrared light. Meanwhile, the relative resistance change of the actuator is ?17.5%. The sensing function is attributed to piezoresistivity and thermoresistivity of the reduced graphene oxide and paper composite. This actuator can be used as a strain sensor to monitor human motions. A smart gripper based on the actuators demonstrates perfect integration of the actuating and sensing functions, which can not only grasp and release an object, but also sense every actuation state of the actuator. The developed integrated‐sensing actuator is hopeful to open new application fields in soft robotics, artificial muscles, flexible wearable devices, and other integrated‐multifunctional devices.     

Semiconductor‐Type MEMS Gas Sensor for Real‐Time Environmental Monitoring Applications

Low power consuming and highly responsive semiconductor‐type microelectromechanical systems (MEMS) gas sensors are fabricated for real‐time environmental monitoring applications. This subsystem is developed using a gas sensor module, a Bluetooth module, and a personal digital assistant (PDA) phone. The gas sensor module consists of a NO₂ or CO gas sensor and signal processing chips. The MEMS gas sensor is composed of a microheater, a sensing electrode, and sensing material. Metal oxide nanopowder is drop‐coated onto a substrate using a microheater and integrated into the gas sensor module. The change in resistance of the metal oxide nanopowder from exposure to oxidizing or deoxidizing gases is utilized as the principle mechanism of this gas sensor operation. The variation detected in the gas sensor module is transferred to the PDA phone by way of the Bluetooth module.     

Enhanced Performance of a ZnO Nanowire‐Based Self‐Powered Glucose Sensor by Piezotronic Effect

A self‐powered, piezotronic effect‐enhanced glucose sensor based on metal‐semiconductor‐metal (M–S–M) structured single ZnO nanowire device is demonstrated. A triboelectrical nanogenerator (TENG) is integrated to build a self‐powered glucose monitoring system (GMS) to realize the continuously monitoring of glucose concentrations. The performance of the glucose sensor is generally enhanced by the piezotronic effect when applying a –0.79% compressive strain on the device, and magnitude of the output signal is increased by more than 200%; the sensing resolution and sensitivity of sensors are improved by more than 200% and 300%, respectively. A theoretical model using energy band diagram is proposed to explain the observed results. This work demonstrates a promising approach to raise the sensitivity, improve the sensing resolution, and generally enhance the performance of glucose sensors, also providing a possible way to build up a self‐powered GMS.     

MXene‐Enabled Electrochemical Microfluidic Biosensor: Applications toward Multicomponent Continuous Monitoring in Whole Blood

Continuous and real‐time sensoring has received much attention in biomarker monitoring, toxicity assessment, and therapeutic agent tracking. However, its on‐site application is seriously limited by several stubborn defects including liability to fouling, signal drifting, short service life, poor repeatability, etc. Additionally, most current methods require extra sample pretreatment, delaying timely acquisition of testing results. To address these issues, MXene‐Ti₃C₂T_x based screen‐printed electrode incorporated with a dialysis microfluidic chip is constructed for a direct and continuous multicomponent analysis of whole blood. Dual‐function of MXene is developed and allows for simultaneous quantification of different target compounds through one device. Importantly, ratiometric sensing tactic is easily implemented in the system, which greatly alleviates signal drifting. As a proof of concept, this novel sensor is applied in hemodialysis, and continuous assay of urea, uric acid, and creatinine levels in human blood is realized. This work paves a new path for 2D MXene in biomedical and sensing applications.     

1D/2D Nanomaterials Synergistic,Compressible, and Response Rapidly 3D Graphene Aerogel for Piezoresistive Sensor

Graphene‐based aerogels have been widely studied for their high porosity, good compressibility, and electrical conductivity as piezoresistive sensors. However, the fabrication of graphene aerogel sensors with good mechanical properties and excellent sensing properties simultaneously remains a challenge. Therefore, in this study, a novel nanofiber reinforced graphene aerogel (aPANF/GA) which has a 3D interconnected hierarchical microstructure with surface‐treated PAN nanofiber as a support scaffold throughout the entire graphene network is designed. This 3D interconnected microporous aPANF/GA aerogel combines an excellent compressive stress of 43.50 kPa and a high piezoresistive sensitivity of 28.62 kPa^?1 as well as a wide range (0–14 kPa) linear sensitivity. When aPANF/GA is used as a piezoresistive sensor, the compression resilience is excellent, the response time is fast at about 37 ms at 3 Pa, and the structural stability and sensing durability are good after 2600 cycles. Indeed, the current signal value is 91.57% of the initial signal value at 20% compressive strain. Furthermore, the assembled sensors can monitor the real time movement of throat, wrist pulse, fingers, wrist, and knee joints of the human body at good sensitivity. These excellent features enable potential applications in health detection.     

Localized Collection of Airborne Analytes: A Transport Driven Approach to Improve the Response Time of Existing Gas Sensor Designs

The detection of single binding has been a recent trend in sensor research introducing various sensor designs where the active sensing elements are nanoscopic in size. Currently, transport and collection of airborne analytes for gas sensors is either diffusion based or non‐localized and it becomes increasingly unlikely for analytes to interact with sensing structures where the active area is shrunk, trading an increased sensitivity with a slow response time. This report introduces a corona discharge based analyte charging method and an electrodynamic nanolens based analyte concentration concept to effectively transport airborne analytes to sensing points to improve the response time of existing gas sensor designs. Localized collection of analytes over a wide range, including microscopic particles, nanoparticles, and small molecules, is demonstrated. In all cases, the collection rate is several orders of magnitudes higher than in the case where the collection is driven by diffusion. The collection scheme is integrated on an existing SERS (surface‐enhanced Raman spectroscopy) based sensor. In terms of response time, the process is able to detect analytes at 9 ppm (parts per million) within 1 s. As a comparison, 1 h is required to reach the same signal level when diffusion‐only‐transport is used.     

Microchannel‐Confined MXene Based Flexible Piezoresistive Multifunctional Micro‐Force Sensor

Multifunctional micro‐force sensing in one device is an urgent need for the higher integration of the smaller flexible electronic device toward wearable health‐monitoring equipment, intelligent robotics, and efficient human–machine interface. Herein, a novel microchannel‐confined MXene‐based flexible piezoresistive sensor is demonstrated to simultaneously achieve multi‐types micro‐force sensing of pressure, sound, and acceleration. Benefiting from the synergistically confined effect of the fingerprint‐microstructured channel and the accordion‐microstructured MXene materials, the as‐designed sensor remarkably endows a low detection limit of 9 Pa, a high sensitivity of 99.5 kPa^?1, and a fast response time of 4 ms, as well as non‐attenuating durability over 10 000 cycles. Moreover, the fabricated sensor is multifunctionally capable of sensing sounds, micromotion, and acceleration in one device. Evidently, such a multifunctional sensing characteristic can highlight the bright prospect of the microchannel‐confined MXene‐based micro‐force sensor for the higher integration of flexible electronics.     

A Mediator‐Free Electroenzymatic Sensing Methodology to Mitigate Ionic and Electroactive Interferents' Effects for Reliable Wearable Metabolite and Nutrient Monitoring

Wearable electroenzymatic sensors enable monitoring of clinically informative biomolecules in epidermally retrievable biofluids. Conventional wearable enzymatic sensors utilize Prussian Blue (a redox mediator) to achieve selectivity against electroactive interferents. However, the use of Prussian Blue presents fundamental challenges including: 1) the susceptibility of the sensor response to dynamic concentration variation of ionic species and 2) the poor operational stability due to the degradation of its framework. As an alternative wearable electroenzymatic sensor development methodology to bypass the aforementioned limitations, a mediator‐free sensing interface is devised, comprising of a coupled platinum nanoparticle/multiwall carbon nanotube layer and a permselective membrane. The interface is adapted to develop sensors targeting glucose, lactate, and choline (as examples of informative metabolites and nutrients), showing high degrees of sensitivity, selectivity (against a wide panel of naturally present and diverse interfering species), stability (<6.5% signal drift over 20 h operation), and reliability of sensing operation in sweat samples. By integration within a readout board, a wireless sample‐to‐answer system is realized for on‐body sweat biomarker analysis. This methodology can be adapted to target a wide panel of biomarkers in various biofluids, introducing a new sensor development direction for personal health monitoring.     

Stretchable and Temperature‐Sensitive Polymer Optical Fibers for Wearable Health Monitoring

Stretchable physical sensors that can detect and quantify human physiological signals such as temperature, are essential to the realization of healthcare devices for biomedical monitoring and human–machine interfaces. Despite recent achievements in stretchable electronic sensors using various conductive materials and structures, the design of stretchable sensors in optics remains a considerable challenge. Here, an optical strategy for the design of stretchable temperature sensors, which can maintain stable performance even under a strain deformation up to 80%, is reported. The optical temperature sensor is fabricated by the incorporation of thermal‐sensitive upconversion nanoparticles (UCNPs) in stretchable polymer‐based optical fibers (SPOFs). The SPOFs are made from stretchable elastomers and constructed in a step‐index core/cladding structure for effective light confinements. The UCNPs, incorporated in the SPOFs, provide thermal‐sensitive upconversion emissions at dual wavelengths for ratiometric temperature sensing by near‐infrared excitation, while the SPOFs endow the sensor with skin‐like mechanical compliance and excellent light‐guiding characteristics for laser delivery and emission collection. The broad applications of the proposed sensor in real‐time monitoring of the temperature and thermal activities of the human body, providing optical alternatives for wearable health monitoring, are demonstrated.     

FPS‐MAC: Fuzzy priority scheduling‐based MAC protocol for intelligent monitoring systems

Recent advances in microelectronics have encouraged the implementation of a wireless sensor network (WSN) in intelligent monitoring systems (IMSs). The IMS for time‐critical applications requires timely and reliable data delivery without sacrificing the energy efficiency of the network. This paper proposes FPS‐MAC, a fuzzy priority scheduling‐based medium access control protocol, designed for event critical traffic in hierarchical WSN. The FPS‐MAC allows time‐critical event traffic to opportunistically steal the data slots allocated for periodic data traffic in event‐based situations. Additionally, a fuzzy logic‐based slot scheduling mechanism is introduced to provide guaranteed and timely medium access to emergency traffic load and ensures the quality‐of‐service (QoS) requirements of IMSs. Both analytical and simulation results for data throughput, energy consumption, and transmission delay of FPS‐MAC, TLHA, E‐BMA, and BMA‐RR have been analyzed to demonstrate the superiority of the proposed FPS‐MAC protocol.     

Wearable and Highly Sensitive Graphene Strain Sensors for Human Motion Monitoring

Sensing strain of soft materials in small scale has attracted increasing attention. In this work, graphene woven fabrics (GWFs) are explored for highly sensitive sensing. A flexible and wearable strain sensor is assembled by adhering the GWFs on polymer and medical tape composite film. The sensor exhibits the following features: ultra‐light, relatively good sensitivity, high reversibility, superior physical robustness, easy fabrication, ease to follow human skin deformation, and so on. Some weak human motions are chosen to test the notable resistance change, including hand clenching, phonation, expression change, blink, breath, and pulse. Because of the distinctive features of high sensitivity and reversible extensibility, the GWFs based piezoresistive sensors have wide potential applications in fields of the displays, robotics, fatigue detection, body monitoring, and so forth.     

MXene Functionalized,Highly Breathable and Sensitive Pressure Sensors with Multi-Layered Porous Structure

Breathable, flexible, and highly sensitive pressure sensors have drawn increasing attention due to their potential in wearable electronics for body-motion monitoring, human-machine interfaces, etc. However, current pressure sensors are usually assembled with polymer substrates or encapsulation layers, thus causing discomfort during wearing (i.e., low air/vapor permeability, mechanical mismatch) and restricting their applications. A breathable and flexible pressure sensor is reported with nonwoven fabrics as both the electrode (printed with MXene interdigitated electrode) and sensing (coated with MXene/silver nanowires) layers via a scalable screen-printing approach. Benefiting from the multi-layered porous structure, the sensor demonstrates good air permeability with high sensitivity (770.86–1434.89 kPa⁻¹), a wide sensing range (0–100 kPa), fast response/recovery time (70/81 ms), and low detection limit (≈1 Pa). Particularly, this sensor can detect full-scale human motion (i.e., small-scale pulse beating and large-scale walking/running) with high sensitivity, excellent cycling stability, and puncture resistance. Additionally, the sensing layer of the pressure sensor also displays superior sensitivity to humidity changes, which is verified by successfully monitoring human breathing and spoken words while wearing a sensor-embedded mask. Given the outstanding features, this breathable sensor shows promise in the wearable electronic field for body health monitoring, sports activity detection, and disease diagnosis.     

Development of Film Sensors Based on Conjugated Polymers for Copper (II) Ion Detection

A fluorescent film sensor was prepared by chemical modification of a polyfluorene derivative on a glass‐plate surface. X‐ray photoelectron spectroscopy and ellipsometry measurements demonstrate the covalent attachment of the polyfluorene derivative to the glass‐plate surface. The sensor was used to detect Cu²⁺ ions in aqueous solution by a mechanism exploiting fluorescence quenching of conjugated polymers. Among the tested metal ions, the film sensor presents good selectivity towards Cu²⁺ ions. Further experiments show that the sensing process is reversible. Moreover, sensory microarrays based on conjugated polymers targeting Cu²⁺ ions are constructed, which display similar sensing performance to that of the film sensor. The structural motif in which conjugated polymers are covalently confined to a solid substrate surface offers several attractive advantages for sensing applications. First, in comparison with film sensors in which small fluorescent molecules are employed as sensing elements, the sensitivity of our new film sensor is enhanced due to the signal‐amplifying effect of the conjugated polymers. Second, the film sensors or microarrays can be used in aqueous environments, which is crucial for their potential use in a wide range of real‐world systems. Since the sensing process is reversible, the sensing materials can be reused. Third, unlike physically coated polymer chains, the covalent attachment of the grafted chains onto a material surface precludes desorption and imparts long‐term stability of the polymer chains.     

Highly Aligned,Anisotropic Carbon Nanofiber Films for Multidirectional Strain Sensors with Exceptional Selectivity

Realization of sensing multidirectional strains is essential to understanding the nature of complex motions. Traditional uniaxial strain sensors lack the capability to detect motions working in different directions, limiting their applications in unconventional sensing technology areas, like sophisticated human–machine interface and real‐time monitoring of dynamic body movements. Herein, a stretchable multidirectional strain sensor is developed using highly aligned, anisotropic carbon nanofiber (ACNF) films via a facile, low‐cost, and scalable electrospinning approach. The fabricated strain sensor exhibits semitransparency, good stretchability of over 30%, outstanding durability for over 2500 cycles, and remarkable anisotropic strain sensing performance with maximum gauge factors of 180 and 0.3 for loads applied parallel and perpendicular to fiber alignment, respectively. Cross‐plied ACNF strain sensors are fabricated by orthogonally stacking two single‐layer ACNFs, which present a unique capability to distinguish the directions and magnitudes of strains with a remarkable selectivity of 3.84, highest among all stretchable multidirectional strain sensors reported so far. Their unconventional applications are demonstrated by detecting multi‐degrees‐of‐freedom synovial joint movements of the human body and monitoring wrist movements for systematic improvement of golf performance. The potential applications of novel multidirectional sensors reported here may shed new light into future development of next‐generation soft, flexible electronics.     

Self‐Powered Tactile Sensor Array Systems Based on the Triboelectric Effect

With the arrival of intelligent terminals, tactile sensors which are capable of sensing various external physical stimuli are considered among the most vital devices for the next generation of smart electronics. To create a self‐powered tactile sensor system that can function sustainably and continuously without an external power source is of crucial significance. An overview of the development in self‐powered tactile sensor array system based on the triboelectric effect is systematically presented. The combination of multi‐functionalization and high performance of tactile sensors aimed at achieving highly comprehensive performance is presented. For the tactile sensor unit, a development is summarized based on the two primary modes which are vertical contact–separation and single‐electrode. For the pressure mapping array, the resolution is significantly enhanced by the novel cross‐type configuration based on the single‐electrode mode. Integrated with other mechanisms, the performance will be further elevated by broadening of the detect range and realizing of visualization of pressure imaging. Then, two main applications of human–machine interaction (HMI) and trajectory monitoring are comprehensively summarized. Finally, the future perspectives of self‐powered tactile sensor system based on triboelectric effect are discussed.     

Organic Light‐Emitting Diode Sensing Platform: Challenges and Solutions

The organic light‐emitting diode (OLED)‐based sensing platform is gaining momentum due to unique attributes of the compact OLEDs that are used as excitation sources. This paper, however, points to issues related to this sensing platform that will affect many (bio)chemical sensing applications, in particular in photoluminescence (PL)‐based sensors operated in the advantageous time domain, where pulsed OLEDs are utilized. The issues are related to the post‐pulse electroluminescence (EL) profile, i.e., transient EL, which depends on the OLED materials and structure, and to the long‐wavelength tail of the typically broad‐band EL spectrum. Depending on materials and device structure, the transient EL may exhibit spikes peaking at ～100–200 ns and μs‐long tails. As shown, these interfere with the determination of PL decay times (that are related to analyte concentrations) of sensing elements. The results also indicate that the long‐wavelength tail of the EL spectrum contributes to the interfering post‐pulse μs‐long EL tail. Hence, it is shown that the choice of OLED materials, the use of microcavity (μC) OLEDs with tunable, narrower EL bands, and the use of UV OLEDs alleviate these issues, resulting in more reliable data analysis. Furthermore, a 2‐D uniform 2 μm‐pitch microlens array that was previously used for improving light extraction from the OLEDs (J.‐M. Park et al., Optics Express 2011 , 19, A786) is used for directional PL scattering toward the photodetector, which leads to a ～2.1–3.8 fold enhancement of the PL signal. This behavior is shown for oxygen sensing, which is the basis for sensing of bioanalytes such as glucose, lactate, ethanol, cholesterol, and uric acid.     

A Robust Wearable Point-of-Care CNT-Based Strain Sensor for Wirelessly Monitoring Throat-Related Illnesses

Point-of-care testing (POC) has the ability to detect chronic and infectious diseases early or at the time of occurrence and provide a state-of-the-art personalized healthcare system. Recently, wearable and flexible sensors have been employed to analyze sweat, glucose, blood, and human skin conditions. However, a flexible sensing system that allows for the real-time monitoring of throat-related illnesses, such as salivary parotid gland swelling caused by flu and mumps, is necessary. Here, for the first time, a wearable, highly flexible, and stretchable piezoresistive sensing patch based on carbon nanotubes (CNTs) is reported, which can record muscle expansion or relaxation in real-time, and thus act as a next-generation POC sensor. The patch offers an excellent gauge factor for in-plane stretching and spatial expansion with low hysteresis. The actual extent of muscle expansion is calculated and the gauge factor for applications entailing volumetric deformations is redefined. Additionally, a bluetooth-low-energy system that tracks muscle activity in real-time and transmits the output signals wirelessly to a smartphone app is utilized. Numerical calculations verify that the low stress and strain lead to excellent mechanical reliability and repeatability. Finally, a dummy muscle is inflated using a pneumatic-based actuator to demonstrate the application of the affixed wearable next-generation POC sensor.     

A Self‐Powered Angle Measurement Sensor Based on Triboelectric Nanogenerator

A self‐powered, sliding electrification based quasi‐static triboelectric sensor (QS‐TES) for detecting angle from rotating motion is reported. This innovative, cost‐effective, simply‐designed QS‐TES has a two‐dimensional planar structure, which consists of a rotator coated with four channel coded Cu foil material and a stator with a fluorinated ethylenepropylene film. On the basis of coupling effect between triboelectrification and electrostatic induction, the sensor generates electric output signals in response to mechanical rotating motion of an object mounted with the sensor. The sensor can read and remember the absolute angular position, angular velocity, and acceleration regardless being continuously monitored or segmented monitored. Under the rotation speed of 100 r min^?1, the output voltage of the sensor reaches as high as 60 V. Given a relatively low threshold voltage of ±0.5 V for data processing, the robustness of the device is guaranteed. The resolution of the sensor is 22.5° and can be further improved by increasing the number of channels. Triggered by the output voltage signal, the rotating characteristics of the steering wheel can be real‐time monitored and mapped by being mounted to QS‐TES. This work not only demonstrates a new principle in the field of angular measurement but also greatly expands the applicability of triboelectric nanogenerator as self‐powered sensors.     

光电脉搏传感器的研制和噪声分析

脉搏血氧仪能够无创、快速、实时地测量血氧饱和度,光电式脉搏传感器是脉搏血氧仪的重要组成部分。介绍了光电式脉搏传感器的原理和设计方案,采用集成光敏部件和放大器的光敏芯片代替传统的分立光敏器件实现对脉搏的测量。芯片的集成化能够有效减小器件间匹配引起的干扰,提高脉搏测量精度。在实验测试过程中,采用该光电式脉搏传感器对人体的脉搏进行实时测量,对脉搏信号测量可能引起的噪声来源做了分析,并做相应的抗干扰处理,得到比较理想的脉搏波形,为脉搏信息的提取和分析提供了良好的数据。