N‐Doped Polypyrrole‐Based Porous Carbons for CO2 Capture

Highly porous N‐doped carbons have been successfully prepared by using KOH as activating agent and polypyrrole (PPy) as carbon precursor. These materials were investigated as sorbents for CO₂ capture. The activation process was carried out under severe (KOH/PPy = 4) or mild (KOH/PPy = 2) activation conditions at different temperatures in the 600–800 °C range. Mildly activated carbons have two important characteristics: i) they contain a large number of nitrogen functional groups (up to 10.1 wt% N) identified as pyridonic‐N with a small proportion of pyridinic‐N groups, and ii) they exhibit, in relation to the carbons prepared with KOH/PPy = 4, narrower micropore sizes. The combination of both of these properties explains the large CO₂ adsorption capacities of mildly activated carbon. In particular, a very high CO₂ adsorption uptake of 6.2 mmol·g^?1 (0 °C) was achieved for porous carbons prepared with KOH/PPy = 2 and 600 °C (1700 m²·g^?1, pore size ≈ 1 nm and 10.1 wt% N). Furthermore, we observed that these porous carbons exhibit high CO₂ adsorption rates, a good selectivity for CO₂‐N₂ separation and it can be easily regenerated.     

A Controllable Synthesis of Rich Nitrogen‐Doped Ordered Mesoporous Carbon for CO2 Capture and Supercapacitors

A controllable one‐pot method to synthesize N‐doped ordered mesoporous carbons (NMC) with a high N content by using dicyandiamide as a nitrogen source via an evaporation‐induced self‐assembly process is reported. In this synthesis, resol molecules can bridge the Pluronic F127 template and dicyandiamide via hydrogen bonding and electrostatic interactions. During thermosetting at 100 °C for formation of rigid phenolic resin and subsequent pyrolysis at 600 °C for carbonization, dicyandiamide provides closed N species while resol can form a stable framework, thus ensuring the successful synthesis of ordered N‐doped mesoporous carbon. The obtained N‐doped ordered mesoporous carbons possess tunable mesostructures (p6m and Im m symmetry) and pore size (3.1–17.6 nm), high surface area (494–586 m² g^?1), and high N content (up to 13.1 wt%). Ascribed to the unique feature of large surface area and high N contents, NMC materials show high CO₂ capture of 2.8–3.2 mmol g^?1 at 298 K and 1.0 bar, and exhibit good performance as the supercapacitor electrode with specific capacitances of 262 F g^?1 (in 1 M H₂SO₄) and 227 F g^?1 (in 6 M KOH) at a current density of 0.2 A g^?1.     

Well‐Ordered Large‐Pore Mesoporous Anatase TiO2 with Remarkably High Thermal Stability and Improved Crystallinity: Preparation,Characterization, and Photocatalytic Performance

Thermally‐stable, ordered mesoporous anatase TiO₂ with large pore size and high crystallinity has been successfully synthesized through an evaporation‐induced self‐assembly technique, combined with encircling ethylenediamine (EN) protectors to maintain the liquid crystal mesophase structure of TiO₂ primary particles, followed by calcination at higher temperature. The structures of the prepared mesoporous TiO₂ are characterized in detail by small‐angle and wide‐angle X‐ray diffraction, Raman spectra, N₂ adsorption/desorption isotherms, and transmission electron microscopy. Experimental results indicate that the well‐ordered mesoporous structure could be maintained up to 700 °C (M700) and also possesses large pore size (10 nm), high specific BET surface area (122 m² g^?1), and high total pore volumes (0.20 cm³ g^?1), which is attributed to encircling EN protectors for maintaining the mesoporous framework against collapsing, inhibiting undesirable grain growth and phase transformation during the calcination process. A possible formation mechanism for the highly stable large‐pore mesoporous anatase TiO₂ is also proposed here, which could be further confirmed by TG/FT‐IR in site analysis and X‐ray photoelectron spectroscopy. The obtained mesoporous TiO₂ of M700 exhibit better photocatalytic activity than that of Degussa P25 TiO₂ for degradation of highly toxic 2,4‐dichlorophenol under UV irradiation. This enhancement is attributed to the well‐ordered large‐pore mesoporous structure, which facilitates mass transport, the large surface area offering more active sites, and high crystallinity that favors the separation of photogenerated electron‐hole pairs, confirmed by surface photovoltage spectra.     

Bifunctional MOF‐Derived Carbon Photonic Crystal Architectures for Advanced Zn–Air and Li–S Batteries: Highly Exposed Graphitic Nitrogen Matters

Nitrogen‐rich porous carbons (NPCs) are the leading cathode materials for next‐generation Zn–air and Li–S batteries. However, most existing NPC suffers from insufficient exposure and harnessing of nitrogen‐dopants (NDs), constraining the electrochemical performance. Herein, by combining silica templating with in situ texturing of metal–organic frameworks, a new bifunctional 3D nitrogen‐rich carbon photonic crystal architecture of simultaneously record‐high total pore volume (13.42 cm³ g^?1), ultralarge surface area (2546 m² g^?1), and permeable hierarchical macro‐meso‐microporosity is designed, enabling sufficient exposure and accessibility of NDs. Thus, when used as cathode catalysts, the Zn–air battery delivers a fantastic capacity of 770 mAh g_Zn^?1 at an unprecedentedly high rate of 120 mA cm^?2, with an ultrahigh power density of 197 mW cm^?2. When hosting 78 wt% sulfur, the Li–S battery affords a high‐rate capacity of 967 mAh g^?1 at 2 C, with superb stability over 1000 cycles at 0.5 C (0.054% decay rate per cycle), comparable to the best literature value. The results prove the dominant role of highly exposed graphitic‐N in boosting both cathode performances.     

Evaporation‐Induced Coating and Self‐Assembly of Ordered Mesoporous Carbon‐Silica Composite Monoliths with Macroporous Architecture on Polyurethane Foams

A facile approach of solvent‐evaporation‐induced coating and self‐assembly is demonstrated for the mass preparation of ordered mesoporous carbon‐silica composite monoliths by using a polyether polyol‐based polyurethane (PU) foam as a sacrificial scaffold. The preparation is carried out using resol as a carbon precursor, tetraethyl orthosilicate (TEOS) as a silica source and Pluronic F127 triblock copolymer as a template. The PU foam with its macrostructure provides a large, 3D, interconnecting interface for evaporation‐induced coating of the phenolic resin‐silica block‐copolymer composites and self‐assembly of the mesostructure, and endows the composite monoliths with a diversity of macroporous architectures. Small‐angle X‐ray scattering, X‐ray diffraction and transmission electron microscopy results indicate that the obtained composite monoliths have an ordered mesostructure with 2D hexagonal symmetry (p6m) and good thermal stability. By simply changing the mass ratio of the resol to TEOS over a wide range (10–90%), a series of ordered, mesoporous composite foams with different compositions can be obtained. The composite monoliths with hierarchical macro/mesopores exhibit large pore volumes (0.3–0.8 cm³ g^?1), uniform pore sizes (4.2–9.0 nm), and surface areas (230–610 m² g^?1). A formation process for the hierarchical porous composite monoliths on the struts of the PU foam through the evaporation‐induced coating and self‐assembly method is described in detail. This simple strategy performed on commercial PU foam is a good candidate for mass production of interface‐assembly materials.     

High‐Content,Well‐Dispersed γ‐Fe2O3 Nanoparticles Encapsulated in Macroporous Silica with Superior Arsenic Removal Performance

Novel composites of iron oxide encapsulated in macroporous silica with excellent arsenic adsorption performance have been successfully developed. Macroporous silica foams with large pore sizes of ≈100 nm and a high pore volume of 1.6 cm³ g^?1 are chosen as the porous matrix. Electron tomography technique confirms that γ‐Fe₂O₃ nanoparticles with an average particle size of ≈6 nm are spatially well‐dispersed and anchored on the pore walls at even a high γ‐Fe₂O₃ content of 34.8 wt%, rather than forming aggregates inside the pores or on the external surface. The open large‐pore structure, high loading amount, and the non‐aggregated nature of γ‐Fe₂O₃ nanoparticles lead to increased adsorption sites and thus high adsorption capacities of both As (V) and As (III) without pre‐treatment (248 and 320 mg g^?1, respectively). Moreover, the composites can reduce the concentration of both As (V) and As (III) from 100 to 2 μg L^?1. It is also demonstrated that the composites can be applied in a household drinking water treatment device, which can continuously treat 20 L of wastewater containing As (V) with the effluent concentration lower than the World Health Organization standard.     

CO2 Capture by As‐Prepared SBA‐15 with an Occluded Organic Template

A novel CO₂ capture phenomenon is observed by modifying as‐prepared mesoporous silica SBA‐15 (SBA(P)) with tetraethylenepentamine (TEPA), not only conserving the energy and time required for removing the template, but also opening the way to utilizing the micelle for dispersing guest species. The TEPA species dispersed within the channels of SBA(P) are highly accessible to CO₂ molecules; moreover, the hydroxyl group of the poly(ethylene oxide)–poly(propylene oxide)–poly(ethylene oxide) (Pluronic P123) template is able to modify the interactions between CO₂ and the amine to enhance the adsorptive capacity of this system. The remarkably high adsorption capacity (173 mg g^–1) of this mesoporous silica–amine composite suggests potential CO₂ trapping applications, especially at low CO₂ concentrations during prolonged cyclic operations.     

Single‐Source Precursors For Synthesizing Bifunctional Periodic Mesoporous Organosilicas

A new class of bifunctional periodic mesoporous organosilicas (PMOs) composed of organosilicate building blocks with two different silicon sites have been synthesized from the single‐source bifunctional organosilica precursors tris(triethoxysilylethyl)ethoxysilane and bis(triethoxysilylethyl)diethoxysilane, respectively denoted MT³‐PMO and DT²‐PMO. The synthesis of these PMOs is achieved by the co‐assembly of a triblock‐copolymer Pluronic P123 template with the bifunctional organosilica precursor under acid‐catalyzed and inorganic‐salt‐assisted conditions. After template removal through solvent extraction, the MT³‐PMO and DT²‐PMO so obtained show well‐ordered mesopores and display large pore diameters (6–7 nm) and pore volumes (0.6–0.8 cm³ g^–1) with a narrow pore‐size distribution and high surface areas (700–800 m³ g^–1).     

A New Approach to Tuning Carbon Ultramicropore Size at Sub‐Angstrom Level for Maximizing Specific Capacitance and CO2 Uptake

Ultramicroporous carbon materials with uniform pore size accurately adjusted to the dimension of electrolyte ions or CO₂ molecule are highly desirable for maximizing specific capacitance and CO₂ uptake. However, efficient ways to fine‐tuning ultramicropore size at angstrom level are scarce. A completely new approach to precisely tuning carbon ultramicropore size at sub‐angstrom level is proposed herein. Due to the varying activating strength and size of the alkali ions, the ultramicropore size can be finely tuned in the range of 0.60–0.76 nm as the activation ion varies from Li⁺ to Cs⁺. The carbons prepared by direct pyrolysis of alkali salts of carboxylic phenolic resins yield ultrahigh capacitances of up to 223 F g^‐1 (205 F cm^‐3) in ionic liquid electrolyte, and superior CO₂ uptake of 5.20 mmol g^‐1 at 1.0 bar and 25 °C. Such outstanding performance of the finely tuned carbons lies in its adjustable pore size perfectly adapted to the electrolyte ions and CO₂ molecule. This work paves the way for a new route to finely tuning ultramicropore size at the sub‐angstrom level in carbon materials.     

Synthesis of Self‐Supported Ordered Mesoporous Cobalt and Chromium Nitrides

Herein, we demonstrate an ammonia nitridation approach to synthesize self‐supported ordered mesoporous metal nitrides (CoN and CrN) from mesostructured metal oxide replicas (Co₃O₄ and Cr₂O₃), which were nanocastly prepared by using mesoporous silica SBA‐15 as a hard template. Two synthetic routes are adopted. One route is the direct nitridation of mesoporous metal oxide nanowire replicas templated from SBA‐15 to metal nitrides. By this method, highly ordered mesoporous cobalt nitrides (CoN) can be obtained by the transformation of Co₃O₄ nanowire replica under ammonia atmosphere from 275 to 350 °C, without a distinct lose of the mesostructural regularity. Treating the samples above 375 °C leads to the formation of metallic cobalt and the collapse of the mesostructure due to large volume shrinkage. The other route is to transform mesostructured metal oxides/silica composites to nitrides/silica composites at 750–1000 °C under ammonia. Ordered mesoporous CrN nanowire arrays can be obtained after the silica template removal by NaOH erosion. A slowly temperature‐program‐decrease process can reduce the influence of silica nitridation and improve the purity of final CrN product. Small‐angle XRD patterns and TEM images showed the 2‐D ordered hexagonal structure of the obtained mesoporous CoN and CrN nanowires. Wide‐angle XRD patterns, HRTEM images, and SAED patterns revealed the formation of crystallized metal nitrides. Nitrogen sorption analyses showed that the obtained materials possessed high surface areas (70–90 m² g^?1) and large pore volumes (about 0.2 cm³ g^?1).     

“Brain‐Coral‐Like” Mesoporous Hollow CoS2@N‐Doped Graphitic Carbon Nanoshells as Efficient Sulfur Reservoirs for Lithium–Sulfur Batteries

Hollow carbon materials are considered promising sulfur reservoirs for lithium–sulfur batteries owing to their internal void space and porous conductive shell, providing high loading and utilization of sulfur. Since the pores in carbon materials play a critical role in the infusion of sulfur, access of the electrolyte, and the passage of lithium polysulfides (LPSs), the creation and tuning of hierarchical pore structures is strongly required to improve the electrochemical properties of sulfur/porous carbon composites, but remains a major challenge. Herein, a “brain‐coral‐like” mesoporous hollow carbon nanostructure consisting of an in situ‐grown N‐doped graphitic carbon nanoshell (NGCNs) matrix and embedded CoS₂ nanoparticles as an efficient sulfur host is presented. The rational synthetic design based on metal–organic framework chemistry furnishes unusual multiple porosity in a carbon scaffold with a macrohollow in the core and microhollows and mesopores in the shell, without the use of any surfactant or template. The CoS₂@NGCNs/S composite electrode facilitates high sulfur loading (75 wt%), strong adsorption of LPSs, efficient reaction kinetics, and stable cycle performance (903 mAh g^?1 at 0.1 C after 100 cycles), derived from the synergetic effects of the dual hollow features, chemically active CoS₂, and the conductive and mesoporous N‐doped carbon matrix.     

Chemical Blowing Approach for Ultramicroporous Carbon Nitride Frameworks and Their Applications in Gas and Energy Storage

A scalable, template‐free synthetic strategy is presented for the preparation of ultramicroporous carbon nitride frameworks (CNFs) through a chemical blowing approach by using ammonium chloride as blowing agent and hexamethylene tetraamine as the C and N precursor and a subsequent potassium hydroxide chemical activation is employed to obtain CNFs with surface areas up to 1730 m² g^?1 along with a high nitrogen content of 13.3 wt%. CNFs showed CO₂ uptake capacities up to 5.74 mmol g^?1 at 1 bar and 1.67 mmol g^?1 at 0.15 bar, 273 K along with a very high CO₂/N₂ selectivity. In addition, H₂ uptake capacity of 1.9 wt% and the isosteric heats of adsorption (Q _st) value of 9.0 kJ mol^?1 at zero coverage have been also observed. Moreover, the presence of nitrogen‐doped graphene walls in CNFs also facilitated their application as supercapacitors, with capacitance values up to ≈114 F g^?1 at 0.5 A g^?1, along with a good cyclability and capacitance retention. This approach effectively extends unique surface properties of carbon nitrides into the micropore regime for effective capture of small gases and energy storage applications. Importantly, textural properties of CNFs can be simply tuned by judicious choice of organic precursors and the blowing agent.     

Multiple Functionalization of Mesoporous Silica in One‐Pot: Direct Synthesis of Aluminum‐Containing Plugged SBA‐15 from Aqueous Nitrate Solutions

Aluminum‐containing plugged mesoporous silica has been successfully prepared in an aqueous solution that contains triblock copolymer templates, nitrates, and silica sources but without using mineral acid. The acidity of the solution can be finely tuned from pH 1.4 to 2.8 according to the amount of the introduced aluminum species which ranged from an Al/Si molar ratio of 0.25/1 to 4.0/1. The aluminum nitrate additive in the starting mixture, along with the weak acidity produced by the nitrates, contributes to the formation of plugged hexagonal structures and the introduction of different amounts of aluminum species into the mesostructure. Characterization by X‐ray diffraction, transmission electron microscopy, and N₂ sorption measurements show that the Al‐containing plugged silicas possess well‐ordered hexagonal mesostructures with high surface areas (700–860 m² g^–1), large pore volume (0.77–1.05 cm³ g^–1) and, more importantly, combined micropores and/or small mesopores in the cylindrical channels. Inductively coupled plasma–atomic emission spectrometry results show that 0.7–3.0 wt % aluminum can be introduced into the final samples. ²⁷Al MAS NMR results display that about 43–60% aluminum species are incorporated into the skeleton of the Al‐containing silicas and the amount of the framework aluminum increases as the initial added nitrates rises. Scanning electron microscopy images reveal that the directly synthesized Al‐containing plugged silica has a similar morphology to that of traditional SBA‐15. Furthermore, the Al‐containing plugged samples have excellent performances in the adsorption and the catalytic decomposition of isopropyl alcohol and nitrosamine. Finally, the direct synthesis method is used to produce plugged mesoporous silicas that contain other metals such as chromium and copper, and the resultant samples also show good catalytic activities.     

Heteroatom (N or N‐S)‐Doping Induced Layered and Honeycomb Microstructures of Porous Carbons for CO2 Capture and Energy Applications

Increasing global challenges such as climate change, environmental pollution, and energy shortage have stimulated the worldwide explorations into novel and clean materials for their applications in the capture of carbon dioxide, a major greenhouse gas, and toxic pollutants, energy conversion, and storage. In this study, two microstructured carbons, namely N‐doped pillaring layered carbon (NC) and N, S codoped honeycomb carbon (NSC), have been fabricated through a one‐pot pyrolysis process of a mixture containing glucose, sodium bicarbonate, and urea or thiourea. The heteroatom doping is found to induce tailored microstructures featuring highly interconnected pore frameworks, high sp²‐C ratios, and high surface areas. The formation mechanism of the varying pore frameworks is believed to be hydrogen‐bond interactions. NSC displays a similar CO₂ adsorption capacity (4.7 mmol g^?1 at 0 °C), a better CO₂/N₂ selectivity, and higher activity in oxygen reduction reaction as compared with NC‐3 (the NC sample with the highest N content of 7.3%). NSC favors an efficient four‐electron reduction pathway and presents better methanol tolerance than Pt/C in alkaline media. The porous carbons also exhibit excellent rate performance as supercapacitors.     

Hierarchical Ordered Dual‐Mesoporous Polypyrrole/Graphene Nanosheets as Bi‐Functional Active Materials for High‐Performance Planar Integrated System of Micro‐Supercapacitor and Gas Sensor

Planar integrated systems of micro‐supercapacitors (MSCs) and sensors are of profound importance for 3C electronics, but usually appear poor in compatibility due to the complex connections of device units with multiple mono‐functional materials. Herein, 2D hierarchical ordered dual‐mesoporous polypyrrole/graphene (DM‐PG) nanosheets are developed as bi‐functional active materials for a novel prototype planar integrated system of MSC and NH₃ sensor. Owing to effective coupling of conductive graphene and high‐sensitive pseudocapacitive polypyrrole, well‐defined dual‐mesopores of ≈7 and ≈18 nm, hierarchical mesoporous network, and large surface area of 112 m² g^?1, the resultant DM‐PG nanosheets exhibit extraordinary sensing response to NH₃ as low as 200 ppb, exceptional selectivity toward NH₃ that is much higher than other volatile organic compounds, and outstanding capacitance of 376 F g^?1 at 1 mV s^?1 for supercapacitors, simultaneously surpassing single‐mesoporous and non‐mesoporous counterparts. Importantly, the bi‐functional DM‐PG‐based MSC‐sensor integrated system represents rapid and stable response exposed to 10–40 ppm of NH₃ after only charging for 100 s, remarkable sensitivity of NH₃ detection that is close to DM‐PG‐based MSC‐free sensor, impressive flexibility with ≈82% of initial response value even at 180°, and enhanced overall compatibility, thereby holding great promise for ultrathin, miniaturized, body‐attachable, and portable detection of NH₃.     

Block‐Copolymer‐Templated Synthesis of Electroactive RuO2‐Based Mesoporous Thin Films

RuO₂‐based mesoporous thin films of optical quality are synthesized from ruthenium‐peroxo‐based sols using micelle templates made of amphiphilic polystyrene‐polyethylene oxide block copolymers. The mesoporous structure and physical properties of the RuO₂ films (mesoporous volume: 30%; pore diameter: ～30 nm) can be controlled by the careful tuning of both the precursor solution and thermal treatment (150–350 °C). The optimal temperature that allows control of both mesoporosity and nanocristallinity is strongly dependent on the substrate (silicon or fluorine‐doped tin oxide). The structure of the resulting mesoporous films are investigated using X‐ray diffraction, X‐ray photoelectron spectroscopy, and atomic force microscopy. Mesoporous layers are additionally characterized by transmission and scanning electron microscopy and ellipsometry while their electrochemical properties are analyzed via cyclic voltammetry. Thick mesoporous films of ruthenium oxide hydrates, RuO₂ · xH₂O, obtained using a thermal treatment at 280 °C, exhibit capacitances as high as 1000 ± 100 F g^?1 at a scan rate of 10 mV s^?1, indicating their potential application as electrode materials.     

Preparation of Highly Ordered Nitrogen‐Containing Mesoporous Carbon from a Gelatin Biomolecule and its Excellent Sensing of Acetic Acid

Novel nitrogen‐containing mesoporous carbon with well‐ordered pores (NMC‐G) and high basicity is synthesized using a low‐cost single‐molecule precursor, gelatin biomolecule, and SBA‐15 as a template via nanocasting method. The obtained materials are thoroughly characterized. It is found that the prepared materials have excellent textural properties such as high specific surface areas, huge pore volumes, and large pore diameters. The pore diameter of the materials can also be controlled with a simple adjustment of the pore diameter of the hard templates. The C/N ratio of the samples is calculated to be ≈6.01, which is slightly higher than that observed for mesoporous carbon nitride samples. X‐ray photoelectron spectroscopy (XPS) reveals the presence of sp² hybridized carbon in aromatic ring structure attached to amino groups. The materials could adsorb a huge quantity of CO₂. The sensing capability of the materials with different pore diameters for different adsorbates including ethanol, acetic acid, aniline, toluene, and ammonia is also investigated. Among the materials with different pore diameters studied, the material with the highest basicity and the largest pore diameter (NMC‐G‐150) showed excellent sensing performance with a high selectivity of adsorption for acetic acid molecule.     

Highly Ordered Mesoporous Silicon Carbide Ceramics with Large Surface Areas and High Stability

Highly ordered mesoporous silicon carbide ceramics have been successfully synthesized with yields higher than 75 % via a one‐step nanocasting process using commercial polycarbosilane (PCS) as a precursor and mesoporous silica as hard templates. Mesoporous SiC nanowires in two‐dimensional (2D) hexagonal arrays (p6m) can be easily replicated from a mesoporous silica SBA‐15 template. Small‐angle X‐ray diffraction (XRD) patterns and transmission electron microscopy (TEM) images show that the SiC nanowires have long‐range regularity over large areas because of the interwire pillar connections. A three‐dimensional (3D) bicontinuous cubic mesoporous SiC structure (Ia3d) can be fabricated using mesoporous silica KIT‐6 as the mother template. The structure shows higher thermal stability than the 2D hexagonal mesoporous SiC, mostly because of the 3D network connections. The major constituent of the products is SiC, with 12 % excess carbon and 14 % oxygen measured by elemental analysis. The obtained mesoporous SiC ceramics are amorphous below 1200 °C and are mainly composed of randomly oriented β‐SiC crystallites after treatment at 1400 °C. N₂‐sorption isotherms reveal that these ordered mesoporous SiC ceramics have high Brunauer–Emmett–Teller (BET) specific surface areas (up to 720 m² g^–1), large pore volumes (～ 0.8 cm³ g^–1), and narrow pore‐size distributions (mean values of 2.0–3.7 nm), even upon calcination at temperatures as high as 1400 °C. The rough surface and high order of the nanowire arrays result from the strong interconnections of the SiC products and are the main reasons for such high surface areas. XRD, N₂‐sorption, and TEM measurements show that the mesoporous SiC ceramics have ultrahigh stability even after re‐treatment at 1400 °C under a N₂ atmosphere. Compared with 2D hexagonal SiC nanowire arrays, 3D cubic mesoporous SiC shows superior thermal stability, as well as higher surface areas (590 m² g^–1) and larger pore volumes (～ 0.71 cm³ g^–1).     

Highly Surface‐Wrinkled and N‐Doped CNTs Anchored on Metal Wire: A Novel Fiber‐Shaped Cathode toward High‐Performance Flexible Li–CO2 Batteries

Li–CO₂ batteries are regarded as a promising candidate for the next‐generation high‐performance electrochemical energy storage system owing to their ultrahigh theoretical energy density and environmentally friendly CO₂ fixation ability. Until now, the majority of reported catalysts for Li–CO₂ batteries are in the powder state. Thus, the air electrodes are produced in 2D rigid bulk structure and their electrochemical properties are negatively influenced by binder. The nondeformable feature and unsatisfactory performance of the cathode have already become the main obstacles that hinder Li–CO₂ batteries toward ubiquity for wearable electronics. In this work, for the first time, a flexible hybrid fiber is reported comprising highly surface‐wrinkled and N‐doped carbon nanotube (CNT) networks anchored on metal wire as the cathode integrated with high performance and high flexibility for fiber‐shaped Li–CO₂ battery. It exhibits a large discharge capacity as high as 9292.3 mAh g^?1, an improved cycling performance of 45 cycles, and a decent rate capability. A quasi‐solid‐state flexible fiber‐shaped Li–CO₂ battery is constructed to illustrate the advantages on mechanical flexibility of this fiber‐shaped cathode. Experiments and theoretical simulations prove that those doped pyridinic nitrogen atoms play a critical role in facilitating the kinetics of CO₂ reduction and evolution reaction, thereby enabling distinctly enhanced electrochemical performance.     

Hollow Mesoporous Carbon Nanocubes: Rigid‐Interface‐Induced Outward Contraction of Metal‐Organic Frameworks

Novel carbon materials derived from metal‐organic frameworks (MOFs) have attracted much attention, but the commonly inevitable inward contraction during the carbonization process has restricted their structural variety and applications. In this work, a novel rigid‐interface induced outward contraction approach is reported for synthesizing hollow mesoporous carbon nanocubes (HMCNCs) by using ZIF‐8 nanocubes as precursors. HMCNCs exhibit a cubic morphology with the particle sizes slightly larger than ZIF‐8 nanocubes. Due to the unique outward contraction process, uniform carbon nanocubes with a hollow cavity, an outer microporous shell, and an inner mesoporous wall are simultaneously formed with a large pore size (25 nm), high surface area (1085.7 m² g^?1), high porosity (3.77 cm³ g^?1), and high nitrogen content (12.2%). When used as a cathode material for Li–SeS₂ batteries, the HMCNCs deliver a stable capacity of 812.6 mA h g^?1 at 0.2 A g^?1 after 100 cycles and an outstanding rate capability (455.1 mA h g^?1 at 5.0 A g^?1). The findings may pave the way for the construction of distinctive MOF‐derived carbon materials for various applications.