Conductive “Smart” Hybrid Hydrogels with PNIPAM and Nanostructured Conductive Polymers

Stimuli‐responsive hydrogels with decent electrical properties are a promising class of polymeric materials for a range of technological applications, such as electrical, electrochemical, and biomedical devices. In this paper, thermally responsive and conductive hybrid hydrogels are synthesized by in situ formation of continuous network of conductive polymer hydrogels crosslinked by phytic acid in poly(N‐isopropylacrylamide) matrix. The interpenetrating binary network structure provides the hybrid hydrogels with continuous transporting path for electrons, highly porous microstructure, strong interactions between two hydrogel networks, thus endowing the hybrid hydrogels with a unique combination of high electrical conductivity (up to 0.8 S m^?1), high thermoresponsive sensitivity (significant volume change within several seconds), and greatly enhanced mechanical properties. This work demonstrates that the architecture of the filling phase in the hydrogel matrix and design of hybrid hydrogel structure play an important role in determining the performance of the resulting hybrid material. The attractive performance of these hybrid hydrogels is further demonstrated by the developed switcher device which suggests potential applications in stimuli‐responsive electronic devices.     

Poly(N‐isopropylacrylamide)‐Clay Nanocomposite Hydrogels with Responsive Bending Property as Temperature‐Controlled Manipulators

Novel poly(N‐isopropylacrylamide)‐clay (PNIPAM‐clay) nanocomposite (NC) hydrogels with both excellent responsive bending and elastic properties are developed as temperature‐controlled manipulators. The PNIPAM‐clay NC structure provides the hydrogel with excellent mechanical property, and the thermoresponsive bending property of the PNIPAM‐clay NC hydrogel is achieved by designing an asymmetrical distribution of nanoclays across the hydrogel thickness. The hydrogel is simply fabricated by a two‐step photo polymerization. The thermoresponsive bending property of the PNIPAM‐clay NC hydrogel is resulted from the unequal forces generated by the thermoinduced asynchronous shrinkage of hydrogel layers with different clay contents. The thermoresponsive bending direction and degree of the PNIPAM‐clay NC hydrogel can be adjusted by controlling the thickness ratio of the hydrogel layers with different clay contents. The prepared PNIPAM‐clay NC hydrogels exhibit rapid, reversible, and repeatable thermoresponsive bending/unbending characteristics upon heating and cooling. The proposed PNIPAM‐clay NC hydrogels with excellent responsive bending property are demonstrated as temperature‐controlled manipulators for various applications including encapsulation, capture, and transportation of targeted objects. They are highly attractive material candidates for stimuli‐responsive “smart” soft robots in myriad fields such as manipulators, grippers, and cantilever sensors.     

Alginate‐Boronic Acid: pH‐Triggered Bioinspired Glue for Hydrogel Assembly

The development of bioadhesives has become an emerging research field for tissue sealants, wound dressings, and hemostatic agents. However, assembling hydrogels using bioadhesive‐mediated attachment remains a challenging task. Significantly high water content (>90%) in hydrogels compared to that of biological tissues is the main cause of failure. Considering that hydrogels are primary testing scaffolds mimicking in vivo environments, developing strategies to assemble hydrogels that exhibit diverse properties is important. Self‐healing gels have been reported, but such gels often lack biocompatibility, and two gel pieces should be identical in chemistry for assembly, thus not allowing co‐existence of diverse biological environments. Herein, a mussel‐mimetic cis‐diol‐based adhesive, alginate‐boronic acid, that exhibits pH‐responsive curing from a viscoelastic solution to soft gels is developed. Associated mechanisms are that 1) polymeric diffusion occurs at interfaces utilizing intrinsic high water content; 2) the conjugated cis‐diols strongly interact/entangle with hydrogel chains; 3) curing processes begin by a slight increase in pH, resulting in robust attachment of diverse types of hydrogel building blocks for assembly. The findings obtained with alginate‐boronic acid glues suggest a rational design principle to attach diverse hydrogel building blocks to provide platforms mimicking in vivo environments.     

Combining 3D Printing with Electrospinning for Rapid Response and Enhanced Designability of Hydrogel Actuators

Porous structures have emerged as a breakthrough of shape‐morphing hydrogels to achieve a rapid response. However, these porous actuators generally suffer from a lack of complexity and diversity in obtained 3D shapes. Herein, a simple yet versatile strategy is developed to generate shape‐morphing hydrogels with both fast deformation and enhanced designability in 3D shapes by combining two promising technologies: electrospinning and 3D printing. Elaborate patterns are printed on mesostructured stimuli‐responsive electrospun membranes, modulating in‐plane and interlayer internal stresses induced by swelling/shrinkage mismatch, and thus guiding morphing behaviors of electrospun membranes to adapt to changes of the environment. With this strategy, a series of fast deformed hydrogel actuators are constructed with various distinctive responsive behaviors, including reversible/irreversible formations of 3D structures, folding of 3D tubes, and formations of 3D structures with multi low‐energy states. It is worth noting that although poly(N‐isopropyl acrylamide) is chosen as the model system in the present research, our strategy is applicable to other stimuli‐responsive hydrogels, which enriches designs of rapid deformed hydrogel actuators.     

A pH‐Responsive Gating Membrane System with Pumping Effects for Improved Controlled Release

In this study, we report on a novel composite membrane system for pH‐responsive controlled release, which is composed of a porous membrane with linear grafted, positively pH‐responsive polymeric gates acting as functional valves, and a crosslinked, negatively pH‐responsive hydrogel inside the reservoir working as a functional pumping element. The proposed system features a large responsive release rate that goes effectively beyond the limit of concentration‐driven diffusion due to the pumping effects of the negatively pH‐responsive hydrogel inside the reservoir. The pH‐responsive gating membranes were prepared by grafting poly(methacrylic acid) (PMAA) linear chains onto porous polyvinylidene fluoride (PVDF) membrane substrates using a plasma‐graft pore‐filling polymerization, and the crosslinked poly(N,N‐dimethylaminoethyl methacrylate) (PDM) hydrogels were synthesized by free radical polymerization. The volume phase‐transition characteristics of PMAA and PDM were opposite. The proposed system opens new doors for pH‐responsive “smart” or “intelligent” controlled‐release systems, which are highly attractive for drug‐delivery systems, chemical carriers, sensors, and so on.     

Gradient Porous Elastic Hydrogels with Shape‐Memory Property and Anisotropic Responses for Programmable Locomotion

Programmable locomotion of responsive hydrogels has gained increasing attention for potential applications in soft robotics, microfluidic components, actuators, and artificial muscle. Modulation of hydrogel pore structures is essential for tailoring their mechanical strength, response speeds, and motion behaviors. Conventional methods forming hydrogels with homogeneous or stepwise‐distributed pore structures are limited by the required compromise to simultaneously optimize these aspects. Here, a heterobifunctional crosslinker enabled hydrothermal process is introduced to synthesize responsive hydrogels with well‐defined gradient pore construction. According to gradient porosity controls, the hydrogels simultaneously exhibit rapid responses to external stimuli, high elasticity/compressibility, and programmable locomotion capability. By incorporating polypyrrole nanoparticles as photothermal transducers, photo/thermal responsive composite hydrogels are formed to enable programmable control of locomotion such as bending, curving, twisting, and octopus‐like swimming under near‐infrared laser stimulation. The tunable pore structures, mechanical properties, and locomotion of this new class of materials make these gradient porous hydrogels potentially suitable for a variety of applications.     

Thermogelling,ABC Triblock Copolymer Platform for Resorbable Hydrogels with Tunable,Degradation‐Mediated Drug Release

Clinical application of injectable, thermoresponsive hydrogels is hindered by lack of degradability and controlled drug release. To overcome these challenges, a family of thermoresponsive, ABC triblock polymer‐based hydrogels has been engineered to degrade and release drug cargo through either oxidative or hydrolytic/enzymatic mechanisms dictated by the “A” block composition. Three ABC triblock copolymers are synthesized with varying “A” blocks, including oxidation‐sensitive poly(propylene sulfide), slow hydrolytically/enzymatically degradable poly(ε‐caprolactone), and fast hydrolytically/enzymatically degradable poly(d ,l ‐lactide‐co‐glycolide), forming the respective formulations PPS₁₃₅‐b‐PDMA₁₅₂‐b‐PNIPAAM₂₂₅ (PDN), PCL₈₅‐b‐PDMA₁₅₀‐b‐PNIPAAM₁₅₀ (CDN), and PLGA₆₀‐b‐PDMA₁₄₈‐b‐PNIPAAM₁₅₂ (LGDN). For all three polymers, hydrophilic poly(N,N‐dimethylacrylamide) and thermally responsive poly(N‐isopropylacrylamide) comprise the “B” and “C” blocks, respectively. These copolymers form micelles in aqueous solutions at ambient temperature that can be preloaded with small molecule drugs. These solutions quickly transition into hydrogels upon heating to 37 °C, forming a supra‐assembly of physically crosslinked, drug‐loaded micelles. PDN hydrogels are selectively degraded under oxidative conditions while CDN and LGDN hydrogels are inert to oxidation but show differential rates of hydrolytic/enzymatic decomposition. All three hydrogels are cytocompatible in vitro and in vivo, and drug‐loaded hydrogels demonstrate differential release kinetics in vivo corresponding with their specific degradation mechanism. These collective data highlight the potential cell and drug delivery use of this tunable class of ABC triblock polymer thermogels.     

Highly Efficient Self‐Healable and Dual Responsive Cellulose‐Based Hydrogels for Controlled Release and 3D Cell Culture

To face the increasing demand of self‐healing hydrogels with biocompatibility and high performances, a new class of cellulose‐based self‐healing hydrogels are constructed through dynamic covalent acylhydrazone linkages. The carboxyethyl cellulose‐graft‐dithiodipropionate dihydrazide and dibenzaldehyde‐terminated poly(ethylene glycol) are synthesized, and then the hydrogels are formed from their mixed solutions under 4‐amino‐DL‐phenylalanine (4a‐Phe) catalysis. The chemical structure, as well as microscopic morphologies, gelation times, mechanical and self‐healing performances of the hydrogels are investigated with ¹H NMR, Fourier transform infrared spectroscopy, atomic force microscopy, rheological and compression measurements. Their gelation times can be controlled by varying the total polymer concentration or 4a‐Phe content. The resulted hydrogels exhibit excellent self‐healing ability with a high healing efficiency (≈96%) and good mechanical properties. Moreover, the hydrogels display pH/redox dual responsive sol‐gel transition behaviors, and are applied successfully to the controlled release of doxorubicin. Importantly, benefitting from the excellent biocompatibility and the reversibly cross‐linked networks, the hydrogels can function as suitable 3D culture scaffolds for L929 cells, leading to the encapsulated cells maintaining a high viability and proliferative capacity. Therefore, the cellulose‐based self‐healing hydrogels show potential applications in drug delivery and 3D cell culture for tissue engineering.     

Stomata‐Inspired Membrane Produced Through Photopolymerization Patterning

The programmed movements of responsive functional hydrogels have received much attention because of their abundant functions and wide range of engineering applications. In this study, an innovative stomata‐inspired membrane (SIM) is fabricated by using a temperature‐responsive hydrogel through a simple, cost‐effective, and high‐throughput patterned photopolymerization. Polymerization‐induced diffusion on the macroscale surface results in formation of a double‐parted polymer membrane with fine pores after single illumination. After heating the SIM, the less deformable thick frame supports the whole structure and the highly deformable thin base regulates pore shape. Among various SIM types, the slit pores of monocot SIM, which are lined up in parallel, exhibit the largest radius deformation. The morphological configuration of the SIM can be easily controlled by changing the photomask for a given application. As the developed SIM features the sensing‐to‐activation functions of stimuli‐responsive hydrogels and can be easily fabricated, this membrane can be potentially used for numerous practical applications, such as filter membranes with adjustable pores, membrane‐based sensors, membrane‐based actuators, and multifunctional membranes.     

Facile One‐Step Micropatterning Using Photodegradable Gelatin Hydrogels for Improved Cardiomyocyte Organization and Alignment

Hydrogels are often employed as temporary platforms for cell proliferation and tissue organization in vitro. Researchers have incorporated photodegradable (PD) moieties into synthetic polymeric hydrogels as a means of achieving spatiotemporal control over material properties. In this study protein‐based PD hydrogels composed of methacrylated gelatin and a crosslinker containing o‐nitrobenzyl ester groups are developed. The hydrogels are able to degrade rapidly and specifically in response to UV light and can be photopatterned to a variety of shapes and dimensions in a one‐step process. Micropatterned PD hydrogels are shown to improve cell distribution, alignment, and beating regularity of cultured neonatal rat cardiomyocytes. Overall this work introduces a new class of PD hydrogel based on natural and biofunctional polymers as cell culture substrates for improving cellular organization and function.     

Macroporous Hydrogels for Fast and Reversible Switching between Transparent and Structurally Colored States

Colloidal crystals have been used for creating stimuli‐responsive photonic materials. Here, macroporous hydrogels are designed, through a simple and reproducible protocol, that rapidly and reversibly switch between highly transparent and structurally colored states. The macroporous hydrogels are prepared by film‐casting photocurable dispersions of silica particles in hydrogel‐forming resins and selectively removing silica particles. The silica particles spontaneously form a nonclose‐packed array due to repulsive interparticle interaction, which form the regular array of cavities after removal. However, the cavities are randomly collapsed by drying, losing a long‐range order and rendering the materials highly transparent. When the hydrogels are swollen by either water, ethanol, or the mixture, the regular array is restored, which develops brilliant structural colors. This switching is completed in tens of seconds and repeatable without any hysteresis. The resonant wavelength depends on the composition of the water–ethanol mixture, where the dramatic shift occurs in one‐component‐rich mixtures due to the composition of the hydrogel. Micropatterns can be designed to have distinct domains of the macroporous hydrogels, which are transparent at the dried state and disclose encrypted graphics and unique reflectance spectra at the wet state. This class of solvent‐responsive photonic hydrogels is potentially useful for alcohol sensors and user‐interactive anti‐counterfeiting materials.     

Fast Switching of Bright Whiteness in Channeled Hydrogel Networks

Beside pigment absorption and reflection by periodic photonic structures, natural species often use light scattering to achieve whiteness. Synthetic hydrogels offer opportunities in stimuli‐responsive materials and devices; however, they are not conventionally considered as ideal materials to achieve high whiteness by scattering due to the ill‐defined porosities and the low refractive index contrast between the polymer and water. Herein, a poly(N‐isopropylacrylamide) hydrogel network with percolated empty channels (ch‐PNIPAm) is demonstrated to possess switchable bright whiteness upon temperature changes, obtained by removing the physical agarose gel in a semi‐interpenetrating network of agarose and PNIPAm. The hydrogel is highly transparent at room temperature and becomes brightly white above 35 °C. Compared to conventional PNIPAm, the ch‐PNIPAm hydrogel exhibits 80% higher reflectance at 800 nm and 18 times faster phase transition kinetics. The nanoscopic channels in the ch‐PNIPAm facilitate water diffusion upon phase transition, thus enabling the formation of smaller pores and enhanced whiteness in the gel. Furthermore, fast photothermally triggered response down to tens of milliseconds can be achieved. This unique property of the ch‐PNIPAm hydrogel to efficiently scatter visible light can be potentially used for, e.g., smart windows, optical switches, and, as demonstrated in this report, thermoresponsive color displays.     

4D Printing of Hydrogels: A Review

3D printing permits the construction of objects by layer‐by‐layer deposition of material, resulting in precise control of the dimensions and properties of complex printed structures. Although 3D printing fabricates inanimate objects, the emerging technology of 4D printing allows for animated structures that change their shape, function, or properties over time when exposed to specific external stimuli after fabrication. Among the materials used in 4D printing, hydrogels have attracted growing interest due to the availability of various smart hydrogels. The reversible shape‐morphing in 4D printed hydrogel structures is driven by a stress mismatch arising from the different swelling degrees in the parts of the structure upon application of a stimulus. This review provides the state‐of‐the‐art of 4D printing of hydrogels from the materials perspective. First, the main 3D printing technologies employed are briefly depicted, and, for each one, the required physico‐chemical properties of the precursor material. Then, the hydrogels that have been printed are described, including stimuli‐responsive hydrogels, non‐responsive hydrogels that are sensitive to solvent absorption/desorption, and multimaterial structures that are totally hydrogel‐based. Finally, the current and future applications of this technology are presented, and the requisites and avenues of improvement in terms of material properties are discussed.     

A Multiresponsive Anisotropic Hydrogel with Macroscopic 3D Complex Deformations

As one of the most promising smart materials, stimuli‐responsive polymer hydrogels (SPHs) can reversibly change volume or shape in response to external stimuli. They thus have shown promising applications in many fields. While considerable progress of 2D deformation of SPHs has been achieved, the realization of 3D or even more complex deformation still remains a significant challenge. Here, a general strategy towards designing multiresponsive, macroscopically anisotropic SPHs (MA‐SPHs) with the ability of 3D complex deformations is reported. Through a local UV‐reduction of graphene oxide sheets (GOs) with a patterned fashion in the GO‐poly(N‐isopropylacrylamide) (GO‐PNIPAM) composite hydrogel sheet, MA‐SPHs can be achieved after the introduction of a second poly(methylacrylic acid) network in the unreduced part of GO‐PNIPAM hydrogel sheet. The resulting 3D MA‐SPHs can provide remote‐controllable light‐driven, as well as thermo‐, pH‐, and ionic strength‐triggered multiresponsive 3D complex deformations. Approaches in this study may provide new insights in designing and fabricating intelligent soft materials for bioinspired applications.     

Tough Hydrogels with Programmable and Complex Shape Deformations by Ion Dip‐Dyeing and Transfer Printing

Stimuli‐responsive hydrogels with high mechanical strength, programmable deformation, and simple preparation are essential for their practical applications. Here the preparation of tough hydrogels with programmable and complex shape deformations is reported. Janus hydrogels with different compositions and hydrophilic natures on the two surfaces are first prepared, and they exhibit reversible bending/unbending upon swelling/deswelling processes. More impressively, the deformation rate and extent of the hydrogels can further be easily controlled through an extremely simple and versatile ion dip‐dyeing (IDD) and/or ion transfer printing (ITP) method. By selectively printing proper patterns on 1D gel strips, 2D gel sheets and 3D gel structures, the transformations from 1D to 2D, 2D to 3D, and 3D to more complicated 3D shapes can be achieved after swelling the ion‐patterned hydrogels in water. The swelling‐deformable Janus and ion‐patterned hydrogels with high mechanical strengths and programmable deformations can find many practical applications, such as soft machines.     

Stimuli‐Responsive Donor–Acceptor and DNA‐Crosslinked Hydrogels: Application as Shape‐Memory and Self‐Healing Materials

Carboxymethyl cellulose (CMC) chains are functionalized with self‐complementary nucleic acid tethers and electron donor or electron acceptor functionalities. The polymer chains crosslinked by the self‐complementary duplex nucleic acids and the donor–acceptor complexes as bridging units, yield a stiff stimuli‐responsive hydrogel. Upon the oxidation of the electron donor units, the donor–acceptor bridging units are separated, leading to a hydrogel of lower stiffness. By the cyclic oxidation and reduction of the donor units, the hydrogel is reversibly transformed across low and high stiffness states. The controlled stiffness properties of the hydrogel are used to develop shape‐memory hydrogels. In addition, CMC hydrogels crosslinked by donor–acceptor complexes and K⁺‐stabilized G‐quadruplexes reveal stimuli‐responsive properties that exhibit dually triggered stiffness functions. While the hydrogel bridged by the two crosslinking motifs reveals high stiffness, the redox‐stimulated separation of the donor–acceptor complexes or the crown‐ether‐stimulated separation of the G‐quadruplex bridges yields two alternative hydrogels exhibiting low stiffness states. The control over the stiffness properties of the dually triggered hydrogel is used to develop shape‐memory hydrogels, where the donor–acceptor units or G‐quadruplex bridges act as “memories”, and to develop triggered self‐healing process of the hydrogel.     

From Membrane to Skin: Aqueous Permeation Control Through Light‐Responsive Amphiphilic Polymer Co‐Networks

The functionalization of amphiphilic polymer co‐networks with light‐responsive spiropyran and spirooxazine derivatives leads to a new type of light‐responsive materials. The material consisting of hydrophilic nanochannels shows desirable properties such as light‐responsive permeability changes of aqueous caffeine solutions, an exceptional repeatability of the photochromism, and tunable basic permeability rates. The versatility of the system is demonstrated by using different functionalization routes such as copolymerization of light‐responsive monomers or crosslinker as well as postmodification of the preformed amphiphilic network. Moreover, light‐responsive spirobenzopyran and novel spirooxazine derivatives are synthesized, which changes the properties of the light‐responsive membranes after inclusion into the amphiphilic co‐networks. Finally, the permeability of the delivery membrane can be tailored to match the properties of porcine skin, an in vitro model of human neonatal skin. One possible application might be the use of the light‐responsive membranes as key‐unit of a transdermal caffeine‐delivery system for preterm neonates.     

Design of Multistimuli Responsive Hydrogels Using Integrated Modeling and Genetically Engineered Silk–Elastin‐Like Proteins

Elastomeric, robust, and biocompatible hydrogels are rare, while the need for these types of biomaterials in biomedical‐related uses remains high. Here, a new family of genetically engineered silk–elastin‐like proteins (SELPs) with encoded enzymatic crosslinking sites is developed for a new generation of stimuli‐responsive yet robust hydrogels. Input into the designs is guided by simulation and realized via genetic engineering strategies. The avoidance of gamma irradiation or chemical crosslinking during gel fabrication, in lieu of an enzymatic process, expands the versatility of these new gels for the incorporation of labile proteins and cells. In the present study, the new SELP hydrogels offer sequence‐dependent, reversible stimuli‐responsive features. Their stiffness covers almost the full range of the elasticity of soft tissues. Further, physical modification of the silk domains provides a secondary control point to fine‐tune mechanical stiffness while preserving stimuli‐responsive features, with implications for a variety of biomedical material and device needs.     

Tissue Engineering: Scaffold‐Mediated 2D Cellular Orientations for Construction of Three Dimensionally Engineered Tissues Composed of Oriented Cells and Extracellular Matrices (Adv. Funct. Mater. 7/2009)

Various hydrogels, such as poly(γ‐glutamic acid) (γ‐PGA), gelatin (GT), alginic acid (Alg), and agarose (Aga), with 3D interconnected and oriented fibrous pores (OP gels) are prepared for 3D polymeric cellular scaffolds by using silica fiber cloth (SC) as template. After the preparation of these hydrogels with the SC templates, the latter are subsequently removed by washing with hydrofluoric acid solution. Scanning electron microscopy (SEM) clearly shows OP structures in the hydrogels. These various types of OP gels are successfully prepared in this way, independently of the crosslinking mechanism, such as chemical (γ‐PGA or GT), coordinate‐bonded (Alg), or hydrogen‐bonded (Aga) crosslinks. SEM, confocal laser scanning microscopy, and histological evaluations clearly demonstrate that mouse L929 fibroblast cells adhere to and extend along these OP structures on/in γ‐PGA hydrogels during 3D cell culture. The L929 cells that adhere on/in the oriented hydrogel are viable and proliferative. Furthermore, 3D engineered tissues, composed of the oriented cells and extracellular matrices (ECM) produced by the cells, are constructed in vitro by subsequent decomposition of the hydrogel with cysteine after 14 days of cell culture. This novel technology to fabricate 3D‐engineered tissues, consisting of oriented cells and ECM, will be useful for tissue engineering.     

A Novel Wound Dressing Based on Ag/Graphene Polymer Hydrogel: Effectively Kill Bacteria and Accelerate Wound Healing

Avoiding wound infection and retaining an appropriate level of moisture around woundz are major challenges in wound care management. Therefore, designing hydrogels with desired antibacterial performance and good water‐maintaining ability is of particular significance to promote the development of wound dressing. Thus a series of hydrogels are prepared by crosslinking of Ag/graphene composites with acrylic acid and N,N′‐methylene bisacrylamide at different mass ratios. The antibacterial performance and accelerated wound‐healing ability of hydrogel are systematically evaluated with the aim of attaining a novel and effective wound dressing. The as‐prepared hydrogel with the optimal Ag to graphene mass ratio of 5:1 (Ag5G1) exhibits stronger antibacterial abilities than other hydrogels. Meanwhile, Ag5G1 hydrogel exhibits excellent biocompatibility, high swelling ratio, and good extensibility. More importantly, in vivo experiments indicate that Ag5G1 hydrogel can significantly accelerate the healing rate of artificial wounds in rats, and histological examination reveals that it helps to successfully reconstruct intact and thickened epidermis during 15 day of healing of impaired wounds. In one word, the present approach can shed new light on designing of antibacterial material like Ag/graphene composite hydrogel with promising applications in wound dressing.