Visible‐Near Infrared Absorbing Polymers Containing Thienoisoindigo and Electron‐Rich Units for Organic Transistors with Tunable Polarity

Systematic creation of polymeric semiconductors from novel building blocks is critical for improving charge transport properties in organic field‐effect transistors (OFETs). A series of ultralow‐bandgap polymers containing thienoisoindigo (TIIG) as a thiophene analogue of isoindigo (IIG) is synthesized. The UV‐Vis absorptions of the TIIG‐based polymers ( PTIIG‐T , PTIIG‐Se , and PTIIG‐DT ) exhibit broad bands covering the visible to near‐infrared range of up to 1600 nm. All the polymers exhibit unipolar p‐channel operations with regard to gold contacts. PTIIG‐DT with centrosymmetric donor exhibits a maximum mobility of 0.20 cm² V^?1 s^?1 under gold contacts, which is higher than those of the other polymers containing axisymmetric donors. Intriguingly, OFETs fabricated with aluminum electrodes show ambipolar charge transport with hole and electron mobilities of up to 0.28 ( PTIIG‐DT ) and 0.03 ( PTIIG‐T ) cm² V^?1 s^?1, respectively. This is a record value for the hitherto reported TIIG‐based OFETs. The finding demonstrates that TIIG‐based polymers can potentially function as either unipolar or ambipolar semiconductors without reliance on the degree of electron affinity of the co‐monomers.     

Layer‐by‐Layer Conjugated Extension of a Semiconducting Polymer for High‐Performance Organic Field‐Effect Transistor

A donor–acceptor (D–A) semiconducting copolymer, PDPP‐TVT‐29, comprising a diketopyrrolopyrrole (DPP) derivative with long, linear, space‐separated alkyl side‐chains and thiophene vinylene thiophene (TVT) for organic field‐effect transistors (OFETs) can form highly π‐conjugated structures with an edge‐on molecular orientation in an as‐spun film. In particular, the layer‐like conjugated film morphologies can be developed via short‐term thermal annealing above 150 °C for 10 min. The strong intermolecular interaction, originating from the fused DPP and D–A interaction, leads to the spontaneous self‐assembly of polymer chains within close proximity (with π‐overlap distance of 3.55 Å) and forms unexpectedly long‐range π‐conjugation, which is favorable for both intra‐ and intermolecular charge transport. Unlike intergranular nanorods in the as‐spun film, well‐conjugated layers in the 200 °C‐annealed film can yield more efficient charge‐transport pathways. The granular morphology of the as‐spun PDPP‐TVT‐29 film produces a field‐effect mobility (μ _FET) of 1.39 cm² V^?1 s^?1 in an OFET based on a polymer‐treated SiO₂ dielectric, while the 27‐Å‐step layered morphology in the 200 °C‐annealed films shows high μ _FET values of up to 3.7 cm² V^?1 s^?1.     

A Timely Synthetic Tailoring of Biaxially Extended Thienylenevinylene‐Like Polymers for Systematic Investigation on Field‐Effect Transistors

Considering there is growing interest in the superior charge transport in the (E)‐2‐(2‐(thiophen‐2‐yl)‐vinyl)thiophene (TVT)‐based polymer family, an essential step forward is to provide a deep and comprehensive understanding of the structure–property relationships with their polymer analogs. Herein, a carefully chosen set of DPP‐TVT‐n polymers are reported here, involving TVT and diketopyrrolopyrrole (DPP) units that are constructed in combination with varying thiophene content in the repeat units, where n is the number of thiophene spacer units. Their OFET characteristics demonstrate ambipolar behavior; in particular, with DPP‐TVT‐0 a nearly balanced hole and electron transport are observed. Interestingly, the majority of the charge‐transport properties changed from ambipolar to p‐type dominant, together with the enhanced hole mobilities, as the electron‐donating thiophene spacers are introduced. Although both the lamellar d‐spacings and π‐stacking distances of DPP‐TVT‐n decreased with as the number of thiophene spacers increased, DPP‐TVT‐1 clearly shows the highest hole mobility (up to 2.96 cm² V^?1 s^?1) owing to the unique structural conformations derived from its smaller paracrystalline distortion parameter and narrower plane distribution relative to the others. These in‐depth studies should uncover the underlying structure–property relationships in a relevant class of TVT‐like semiconductors, shedding light on the future design of top‐performing semiconducting polymers.     

Controlling Ambipolar Charge Transport in Isoindigo‐Based Conjugated Polymers by Altering Fluorine Substitution Position for High‐Performance Organic Field‐Effect Transistors

A molecular design strategy to achieve highly balanced ambipolar charge transport for donor–acceptor (D–A) isoindigo (IIG)‐based copolymer through systematic selection of fluorination positions is reported. To study fluorine substitution site effects on electronic and structural properties, two fluorinated IIG‐based copolymers (PIIG‐iFT2 and PIIG‐oFT2) are synthesized, which contain two fluorine atoms at the bithiophene (T2) inner and outer site and compare them with a nonfluorinated copolymer of IIG and T2 (PIIG‐T2) as the reference polymer. Fluorination at the outer site of T2 in PIIG‐oFT2 polymer effectively lowers molecular energy levels and increases molecular planarity more than fluorination at the T2 inner site. PIIG‐oFT2 organic field‐effect transistors show highly balanced ambipolar mobility, hole mobility (μ_h)/electron mobility (μ_e) = 1 by increasing electron mobility, whereas PIIG‐T2 (μ_h/μ_e = 9.0) and PIIG‐iFT2 (μ_h/μ_e = 2.4) exhibit unbalanced ambipolar transport. The ambipolar complementary‐like inverter is also demonstrated by simple one‐time coating of PIIG‐oFT2 with gain = 21.     

Boosting the Charge Transport Property of Indeno[1,2‐b]fluorene‐6,12‐dione though Incorporation of Sulfur‐ or Nitrogen‐Linked Side Chains

Alkyl chains are basic units in the design of organic semiconductors for purposes of enhancing solubility, tuning electronic energy levels, and tailoring molecular packing. This work demonstrates that the carrier mobilities of indeno[1,2‐b ]fluorene‐6,12‐dione ( IFD )‐based semiconductors can be dramatically enhanced by the incorporation of sulfur‐ or nitrogen‐linked side chains. Three IFD derivatives possessing butyl, butylthio, and dibutylamino substituents are synthesized, and their organic field‐effect transistors (OFET) are fabricated and characterized. The IFD possessing butyl substituents exhibits a very poor charge transport property with mobility lower than 10^?7 cm² V^?1 s^?1. In contrast, the hole mobility is dramatically increased to 1.03 cm² V^?1 s^?1 by replacing the butyl units with dibutylamino groups ( DBA‐IFD ), while the butylthio‐modified IFD ( BT‐IFD ) derivative exhibits a high and balanced ambipolar charge transport property with the maximum hole and electron mobilities up to 0.71 and 0.65 cm² V^?1 s^?1, respectively. Moreover, the complementary metal–oxide–semiconductor‐like inverters incorporated with the ambipolar OFETs shows sharp inversions with a maximum gain value up to 173. This work reveals that modification of the aromatic core with heteroatom‐linked side chains, such as alkylthio or dialkylamino, can be an efficient strategy for the design of high‐performance organic semiconductors.     

Molecular Packing‐Induced Transition between Ambipolar and Unipolar Behavior in Dithiophene‐4,9‐dione‐Containing Organic Semiconductors

By changing the packing motif of the conjugated cores and the thin‐film microstructures, unipolar organic semiconductors may be converted into ambipolar materials. A combined experimental and theoretical investigation is conducted on the thin‐film organic field‐effect transistors (OFETs) of three organic semiconductors that have the same conjugated core structure of s‐indaceno[1,2‐b:5,6‐b′]dithiophene‐4,9‐dione but with different n‐alkyl groups. The optical and electrochemical measurements suggest that the three organic semiconductors have very similar energy levels; however, their OFETs exhibit dramatically different transport characteristics. Transistors based on compound 1a or 1c show ambipolar transport properties, while those based on compound 1b show p‐type unipolar behavior. Specifically, compound 1c is characterized as a good ambipolar semiconductor with the highest electron mobility of 0.22 cm² V^?1 s^?1 and the highest hole mobility of 0.03 cm² V^?1 s^?1. Complementary metal oxide semiconductor (CMOS) inverters incorporated with compound 1c show sharp inversions with high gains above 50. Theoretical investigations reveal that the drastic difference in the transport properties of the three materials is due to the difference in their molecular packing and film microstructures.     

High‐Mobility Air‐Stable Naphthalene Diimide‐Based Copolymer Containing Extended π‐Conjugation for n‐Channel Organic Field Effect Transistors

A high‐performance naphthalene diimide (NDI)‐based conjugated polymer for use as the active layer of n‐channel organic field‐effect transistors (OFETs) is reported. The solution‐processable n‐channel polymer is systematically designed and synthesized with an alternating structure of long alkyl substituted‐NDI and thienylene–vinylene–thienylene units (PNDI‐TVT). The material has a well‐controlled molecular structure with an extended π‐conjugated backbone, with no increase in the LUMO level, achieving a high mobility and highly ambient stable n‐type OFET. The top‐gate, bottom‐contact device shows remarkably high electron charge‐carrier mobility of up to 1.8 cm² V^?1 s^?1 (I_on/I_off = 10⁶) with the commonly used polymer dielectric, poly(methyl methacrylate) (PMMA). Moreover, PNDI‐TVT OFETs exhibit excellent air and operation stability. Such high device performance is attributed to improved π–π intermolecular interactions owing to the extended π‐conjugation, apart from the improved crystallinity and highly interdigitated lamellar structure caused by the extended π–π backbone and long alkyl groups.     

Donor–Acceptor‐Conjugated Polymer for High‐Performance Organic Field‐Effect Transistors: A Progress Report

Polymeric semiconductors have demonstrated great potential in the mass production of low‐cost, lightweight, flexible, and stretchable electronic devices, making them very attractive for commercial applications. Over the past three decades, remarkable progress has been made in donor–acceptor (D–A) polymer‐based field‐effect transistors, with their charge‐carrier mobility exceeding 10 cm² V^?1 s^?1. Numerous molecular designs of D–A polymers have emerged and evolved along with progress in understanding the charge transport physics behind their high mobility. In this review, the current understanding of charge transport in polymeric semiconductors is covered along with significant features observed in high‐mobility D–A polymers, with a particular focus on polymeric microstructures. Subsequently, emerging molecular designs with further prospective improvements in charge‐carrier mobility are described. Moreover, the current issues and outlook for future generations of polymeric semiconductors are discussed.     

High‐Mobility Naphthalene Diimide and Selenophene‐Vinylene‐Selenophene‐Based Conjugated Polymer: n‐Channel Organic Field‐Effect Transistors and Structure–Property Relationship

Interdependence of chemical structure, thin‐film morphology, and transport properties is a key, yet often elusive aspect characterizing the design and development of high‐mobility, solution‐processed polymers for large‐area and flexible electronics applications. There is a specific need to achieve >1 cm² V^?1 s^?1 field‐effect mobilities (μ) at low processing temperatures in combination with environmental stability, especially in the case of electron‐transporting polymers, which are still lagging behind hole transporting materials. Here, the synthesis of a naphthalene‐diimide based donor–acceptor copolymer characterized by a selenophene vinylene selenophene donor moiety is reported. Optimized field‐effect transistors show maximum μ of 2.4 cm² V^?1 s^?1 and promising ambient stability. A very marked film structural evolution is revealed with increasing annealing temperature, with evidence of a remarkable 3D crystallinity above 180 °C. Conversely, transport properties are found to be substantially optimized at 150 °C, with limited gain at higher temperature. This discrepancy is rationalized by the presence of a surface‐segregated prevalently edge‐on packed polymer phase, dominating the device accumulated channel. This study therefore serves the purpose of presenting a promising, high‐electron‐mobility copolymer that is processable at relatively low temperatures, and of clearly highlighting the necessity of specifically investigating channel morphology in assessing the structure–property nexus in semiconducting polymer thin films.     

Versatile α,ω‐Disubstituted Tetrathienoacene Semiconductors for High Performance Organic Thin‐Film Transistors

Facile one‐pot [1 + 1 + 2] and [2 + 1 + 1] syntheses of thieno[3,2‐b]thieno[2′,3′:4,5]thieno[2,3‐d]thiophene (tetrathienoacene; TTA) semiconductors are described which enable the efficient realization of a new TTA‐based series for organic thin‐film transistors (OTFTs). For the perfluorophenyl end‐functionalized derivative DFP‐TTA , the molecular structure is determined by single‐crystal X‐ray diffraction. This material exhibits n‐channel transport with a mobility as high as 0.30 cm²V^?1s^?1 and a high on‐off ratio of 1.8 × 10⁷. Thus, DFP‐TTA has one of the highest electron mobilities of any fused thiophene semiconductor yet discovered. For the phenyl‐substituted analogue, DP‐TTA , p‐channel transport is observed with a mobility as high as 0.21 cm²V^?1s^?1. For the 2‐benzothiazolyl (BS‐) containing derivative, DBS‐TTA , p‐channel transport is still exhibited with a hole mobility close to 2 × 10^?3 cm²V^?1s^?1. Within this family, carrier mobility magnitudes are strongly dependent on the semiconductor growth conditions and the gate dielectric surface treatment.     

Comparative Carrier Transport Characteristics in Organic Field‐Effect Transistors with Vapor‐Deposited Thin Films and Epitaxially Grown Crystals of Biphenyl‐Capped Thiophene Oligomers

Carrier transport characteristics in organic field‐effect transistors were compared for vapor‐deposited thin films and epitaxially grown needle crystals of biphenyl‐capped thiophene oligomers with different lengths of the thiophene units. The hole mobility of the thin films deposited on Si/SiO₂ substrate was improved up to 0.17 cm² V^–1 s^–1 by formation of platelet crystallites with a domain size of a few micrometer. The hole transport in the epitaxial needle crystals grown on the KCl surface depended upon the molecular orientation with respect to the channel direction. The orientation of the needle axis bridging over the source–drain electrodes increased the mobility since π‐electronic interaction through the parallel stack of the linear molecules enhanced the carrier transport along the needle. The deposition condition and electronic energy levels of the oligomers, depending on the length of the thiophene units, also affected their characteristics.     

Solution‐Processed Monolayer Organic Crystals for High‐Performance Field‐Effect Transistors and Ultrasensitive Gas Sensors

This work innovatively develops a dual solution‐shearing method utilizing the semiconductor concentration region close to the solubility limit, which successfully generates large‐area and high‐performance semiconductor monolayer crystals on the millimeter scale. The monolayer crystals with poly(methyl methacrylate) encapsulation show the highest mobility of 10.4 cm² V^?1 s^?1 among the mobility values in the reported solution‐processed semiconductor monolayers. With similar mobility to multilayer crystals, light is shed on the charge accumulation mechanism in organic field‐effect transistors (OFETs), where the first layer on interface bears the most carrier transport task, and the other above layers work as carrier suppliers and encapsulations to the first layer. The monolayer crystals show a very low dependency on channel directions with a small anisotropic ratio of 1.3. The positive mobility–temperature correlation reveals a thermally activated carrier transport mode in the monolayer crystals, which is different from the band‐like transport mode in multilayer crystals. Furthermore, because of the direct exposure of highly conductive channels, the monolayer crystal based OFETs can sense ammonia concentrations as low as 10 ppb. The decent sensitivity indicates the monolayer crystals are potential candidates for sensor applications.     

High‐Performance,Low‐Operating‐Voltage Organic Field‐Effect Transistors with Low Pinch‐Off Voltages

Organic field‐effect transistors suffer from ultra‐high operating voltages in addition to their relative low mobility. A general approach to low‐operating‐voltage organic field‐effect transistors (OFETs) using donor/acceptor buffer layers is demonstrated. P‐type OFETs with acceptor molecule buffer layers show reduced operating voltages (from 60–100 V to 10–20 V), with mobility up to 0.19 cm² V^?1 s^?1 and an on/off ratio of 3 × 10⁶. The subthreshold slopes of the devices are greatly reduced from 5–12 V/decade to 1.68–3 V/decade. This favorable combination of properties means that such OFETs can be operated successfully at voltages below 20 V (|V_DS| ≤ 20 V, |V_GS| ≤ 20 V). This method also works for n‐type semiconductors. The reduced operating voltage and low pinch‐off voltage contribute to the improved ordering of the polycrystalline films, reduced grain boundary resistance, and steeper subthreshold slopes.     

Polymer‐Based Organic Field‐Effect Transistors with Active Layers Aligned by Highly Hydrophobic Nanogrooved Surfaces

In this study, polymer‐based organic field‐effect transistors (OFETs) that exhibit alignment‐induced mobility enhancement, very small device‐to‐device variation, and high operational stability are successfully fabricated by a simple coating method of semiconductor solutions on highly hydrophobic nanogrooved surfaces. The highly hydrophobic nanogrooved surfaces (water contact angle >110°) are effective at inducing unidirectional alignment of polymer backbone structures with edge‐on orientation and are advantageous for realizing high operational stability because of their water‐repellent nature. The dewetting of the semiconductor solution is a critical problem in the thin film formation on highly hydrophobic surfaces. Dewetting during spin coating is suppressed by surrounding the hydrophobic regions with hydrophilic ones under appropriate designs. For the OFET array with an aligned terrace‐phase active layer of poly(2,5‐bis(3‐hexadecylthiophene‐2‐yl)thieno[3,2‐b]thiophene), the hole mobility in the saturation regime of 30 OFETs with channel current direction parallel to the nanogrooves is 0.513 ± 0.018 cm² V^?1 s^?1, which is approximately double that of the OFETs without nanogrooves, and the intrinsic operational stability is comparable to the operational stability of amorphous‐silicon field‐effect transistors. In other words, alignment‐induced mobility enhancement and high operational stability are successfully achieved with very small device‐to‐device variation. This coating method should be a promising means of fabricating high‐performance OFETs.     

Solution‐Processed High‐Performance Tetrathienothiophene‐Based Small Molecular Blends for Ambipolar Charge Transport

Four soluble dialkylated tetrathienoacene ( TTAR) ‐based small molecular semiconductors featuring the combination of a TTAR central core, π‐conjugated spacers comprising bithiophene ( bT ) or thiophene ( T ), and with/without cyanoacrylate ( CA ) end‐capping moieties are synthesized and characterized. The molecule DbT‐TTAR exhibits a promising hole mobility up to 0.36 cm² V^?1 s^?1 due to the enhanced crystallinity of the microribbon‐like films. Binary blends of the p‐type DbT‐TTAR and the n‐type dicyanomethylene substituted dithienothiophene‐quinoid ( DTTQ‐11 ) are investigated in terms of film morphology, microstructure, and organic field‐effect transistor (OFET) performance. The data indicate that as the DbT‐TTAR content in the blend film increases, the charge transport characteristics vary from unipolar (electron‐only) to ambipolar and then back to unipolar (hole‐only). With a 1:1 weight ratio of DbT‐TTAR DTTQ‐11 in the blend, well‐defined pathways for both charge carriers are achieved and resulted in ambipolar transport with high hole and electron mobilities of 0.83 and 0.37 cm² V^?1 s^?1, respectively. This study provides a viable way for tuning microstructure and charge carrier transport in small molecules and their blends to achieve high‐performance solution‐processable OFETs.     

High‐Mobility n‐Type Organic Transistors Based on a Crystallized Diketopyrrolopyrrole Derivative

A new high‐performing small molecule n‐channel semiconductor based on diketopyrrolopyrrole (DPP), 2,2′‐(5,5′‐(2,5‐bis(2‐ethylhexyl)‐3,6‐dioxo‐2,3,5,6‐tetrahydropyrrolo[3,4‐c]pyrrole‐1,4‐diyl)bis(thiophene‐5,2‐diyl))bis(methan‐1‐yl‐1‐ylidene)dimalononitrile (DPP‐T‐DCV), is successfully synthesized. The frontier molecular orbitals in this designed structure are elaborately tuned by introducing a strong electron‐accepting functionality (dicyanovinyl). The well‐defined lamellar structures of the crystals display a uniform terrace step height corresponding to a molecular monolayer in the solid‐state. As a result of this tuning and the remarkable crystallinity derived from the conformational planarity, organic field‐effect transistors (OFETs) based on dense‐packed solution‐processed single‐crystals of DPP‐T‐DCV exhibit an electron mobility (μ_e) up to 0.96 cm² V^?1 s^?1, one of the highest values yet obtained for DPP derivative‐based n‐channel OFETs. Polycrystalline OFETs show promise (with an μ_e up to 0.64 cm² V^?1 s^?1) for practical utility in organic device applications.     

Effect of Non‐Chlorinated Mixed Solvents on Charge Transport and Morphology of Solution‐Processed Polymer Field‐Effect Transistors

Using non‐chlorinated solvents for polymer device fabrication is highly desirable to avoid the negative environmental and health effects of chlorinated solvents. Here, a non‐chlorinated mixed solvent system, composed by a mixture of tetrahydronaphthalene and p­‐xylene, is described for processing a high mobility donor‐acceptor fused thiophene‐diketopyrrolopyrrole copolymer (PTDPPTFT4) in thin film transistors. The effects of the use of a mixed solvent system on the device performance, e.g., charge transport, morphology, and molecular packing, are investigated. p‐Xylene is chosen to promote polymer aggregation in solution, while a higher boiling point solvent, tetrahydronaphthalene, is used to allow a longer evaporation time and better solubility, which further facilitates morphological tuning. By optimizing the ratio of the two solvents, the charge transport characteristics of the polymer semiconductor device are observed to significantly improve for polymer devices deposited by spin coating and solution shearing. Average charge carrier mobilities of 3.13 cm² V^?1 s^?1 and a maximum value as high as 3.94 cm² V^?1 s^?1 are obtained by solution shearing. The combination of non‐chlorinated mixed solvents and the solution shearing film deposition provide a practical and environmentally‐friendly approach to achieve high performance polymer transistor devices.     

Bithienopyrroledione‐Based Copolymers,Versatile Semiconductors for Balanced Ambipolar Thin‐Film Transistors and Organic Solar Cells with V oc > 1 V

Conjugated polymer semiconductors P1 and P2 with bithienopyrroledione (bi‐TPD) as acceptor unit are synthesized. Their transistor and photovoltaic performances are investigated. Both polymers display high and balanced ambipolar transport behaviors in thin‐film transistors. P1‐ based devices show an electron mobility of 1.02 cm² V^?1 s^?1 and a hole mobility of 0.33 cm² V^?1 s^?1, one of the highest performance reported for ambipolar polymer transistors. The electron and hole mobilities of P2 transistors are 0.36 and 0.16 cm² V^?1 s^?1, respectively. The solar cells with PC₇₁BM as the electron acceptor and P1/P2 as the donor exhibit a high V _oc about 1.0 V, and a power conversion efficiency of 6.46% is observed for P1‐ based devices without any additives and/or post treatment. The high performance of P1 and P2 is attributed to their crystalline films and short π–π stacking distance (<3.5 Å). These results demonstrate (1) bi‐TPD is an excellent versatile electron‐deficient unit for polymer semiconductors and (2) bi‐TPD‐based polymer semiconductors have potential applications in organic transistors and organic solar cells.     

High‐Performance Ambipolar Polymers Based on Electron‐Withdrawing Group Substituted Bay‐Annulated Indigo

For donor–acceptor conjugated polymers, it is an effective strategy to improve their electron mobilities by introducing electron‐withdrawing groups (EWGs, such as F, Cl, or CF₃) into the polymer backbone. However, the introduction of different EWGs always requires a different synthetic approach, leading to additional arduous work. Here, an effective two‐step method is developed to obtain EWG substituted bay‐annulated indigo (BAI) units. This method is effective to introduce various EWGs (F, Cl, or CF₃) into BAI at different substituted positions. Based on this method, EWG substituted BAI acceptors, including 2FBAI, 2ClBAI, and 2CF₃BAI, are reported for the first time. Furthermore, four polymers of PBAI‐V, P2FBAI‐V, P2ClBAI‐V, and P4OBAI‐V are developed. All the polymers show ambipolar transport properties. Particularly, P2ClBAI‐V exhibits remarkable hole and electron mobilities of 4.04 and 1.46 cm² V^?1 s^?1, respectively. These mobilities are among the highest values for BAI‐based polymers.     

Diketopyrrolopyrrole‐Based Conjugated Polymers Synthesized via Direct Arylation Polycondensation for High Mobility Pure n‐Channel Organic Field‐Effect Transistors

High‐performance unipolar n‐type conjugated polymers (CPs) are critical for the development of organic electronics. In the current paper, four “weak donor–strong acceptor” n‐type CPs based on pyridine flanked diketopyrrolopyrrole (PyDPP), namely PPyDPP1‐4FBT, PPyDPP2‐4FBT, PPyDPP1‐4FTVT, and PPyDPP2‐4FTVT, are synthesized via direct arylation polycondensation by using 3,3′,4,4′‐tetrafluoro‐2,2′‐bithiophene (4FBT) or (E)‐1,2‐bis(3,4‐difluorothien‐2‐yl)ethene (4FTVT) as weak donor unit. All four polymers exhibit low‐lying highest occupied molecular orbital (≈ ?5.90 eV) and lowest unoccupied molecular orbital energy levels (≈ ?3.70 eV). Top‐gate/bottom‐contact organic field‐effect transistors based on all four polymers display unipolar n‐channel characteristics with electron mobility (µ_e) above 1 cm² V^?1 s^?1 in air, and presented linear |I_SD|^1/2 ?V_GS plots and weak dependence of the extracted moblity on gate voltage (V_GS), indicative of the reliability of the extracted mobility values. Importantly, the devices based on PPyDPP1‐4FBT and PPyDPP2‐4FBT show a pure unipolar n‐channel transistor behavior as revealed by the typical unipolar n‐channel output characteristics and clear off‐regimes in transfer characteristics. Attributed to its high crystallinity and favorable thin film morphology, PPyDPP2‐4FBT shows the highest µ_e of 2.45 cm² V^?1 s^?1, which is among the highest for unipolar n‐type CPs reported to date. This is also the first report for DPP based pure n‐type CPs with µ_e greater than 1 cm² V^?1 s^?1.