Resonance Raman spectroscopy characterization of single-wall carbon nanotube separation by their metallicity and diameter

Several techniques were recently reported for the bulk separation of metallic (M) and semiconducting (S) single wall carbon nanotubes (SWNTs), using optical absorption and resonance Raman spectroscopy (RRS) as a proof of the separation. In the present work, we develop a method for the quantitative evaluation of the M to S separation ratio, and also for the SWNT diameter selectivity of the separation process, based on RRS. The relative changes in the integrated intensities of the radial-breathing mode (RBM) features, with respect to the starting material, yield the diameter probability distribution functions for M and S SWNTs in the separated fractions, accounting for the different resonance conditions of individual SWNTs, while the diameter distribution of the starting material is obtained following the fitting procedure developed by Kuzmany and coworkers. Features other than the RBM are generally less effective for characterization of the separation process for SWNTs.     

Resonant Raman spectroscopy of individual strained single-wall carbon nanotubes

Resonance Raman spectra of individual strained ultralong single-wall carbon nanotubes (SWNTs) are studied. Torsional and uniaxial strains are introduced by atomic force microscopy manipulation. Torsional strain strongly affects the Raman spectra, inducing a large downshift in the E2 symmetry mode in the G+ band, but a slight upshift for the rest of the G modes and also an upshift in the radial breathing mode (RBM). Whereas uniaxial strain has no effect on the frequency of either the E2 symmetry mode in the G+ band or the RBM, it downshifts the rest of the G modes. The Raman intensity change reflects the effect of these strains on the SWNT electronic band structure.     

Peptide-mediated formation of single-wall carbon nanotube composites

The formation of silica- and titania-coated single-wall carbon nanotubes (SWNTs) using a mutlifunctional peptide to both suspend SWNTs and direct the precipitation of silica and titania at room temperature is demonstrated.     

Raman spectroscopy of single-wall boron nitride nanotubes

Single-wall boron nitride nanotubes samples synthesized by laser vaporization of a hexagonal BN target under a nitrogen atmosphere are studied by UV and visible Raman spectroscopy. We show that resonant conditions are necessary for investigating phonon modes of BNNTs. Raman excitation in the UV (229 nm) provides preresonant conditions, allowing the identification of the A1 tangential mode at 1370 cm(-1). This is 5 cm(-1) higher than the E(2g) mode in bulk h-BN. Ab initio calculations show that the lower frequency of bulk h-BN with respect to large diameter nanotubes and the single sheet of h-BN is related to a softening of the sp2 bonds in the bulk due to interlayer interaction.     

High-performance single-wall carbon nanotube transparent conductive films

A single-wall carbon nanotube(SWCNT) has superior optical,electrical,and mechanical properties due to its unique structure and is therefore expected to be able to form flexible high-performance transparent conductive films(TCFs).However,the optoelectronic performance of these films needs to be improved to meet the requirements of many devices.The electrical resistivity of SWCNTTCFs is mainly determined by the intrinsic resistivity of individual SWCNTs and their junction resistance in networks.We analyze these key factors and focus on the optimization of SWCNTs and their networks,which include the diameter,length,crystallinity and electrical type of the SWCNTs,and the bundle size and interconnects in networks,as well as chemical doping and microgrid design.We conclude that isolated/small-bundle,heavily doped metallic or semiconducting SWCNTs with a large diameter,long length and high crystallinity are necessary to fabricate high-performance SWCNTTCFs.A simple,controllable way to construct macroscopic SWCNT networks with Y-type connections,welded junctions or microgrid design is important in achieving a low resistivity.Finally,some insights into the key challenges in the manufacture and use of SWCNT TCFs and their prospects are presented,hoping to shed light on promoting the practical application of SWCNT TCFs in future flexible and stretchable optoelectronics.     

Electroluminescence from single-wall carbon nanotube network transistors

The electroluminescence (EL) properties from single-wall carbon nanotube network field-effect transistors (NNFETs) and small bundle carbon nanotube field effect transistors (CNFETs) are studied using spectroscopy and imaging in the near-infrared (NIR). At room temperature, NNFETs produce broad (approximately 180 meV) and structured NIR spectra, while they are narrower (approximately 80 meV) for CNFETs. EL emission from NNFETs is located in the vicinity of the minority carrier injecting contact (drain) and the spectrum of the emission is red shifted with respect to the corresponding absorption spectrum. A phenomenological model based on a Fermi-Dirac distribution of carriers in the nanotube network reproduces the spectral features observed. This work supports bipolar (electron-hole) current recombination as the main mechanism of emission and highlights the drastic influence of carrier distribution on the optoelectronic properties of carbon nanotube films.     

Charge noise in liquid-gated single-wall carbon nanotube transistors

The noise properties of single-walled carbon nanotube transistors (SWNT-FETs) are essential for the performance of electronic circuits and sensors. Here, we investigate the mechanism responsible for the low-frequency noise in liquid-gated SWNT-FETs and its scaling with the length of the nanotube channel down to the nanometer scale. We show that the gate dependence of the noise amplitude provides strong evidence for a recently proposed charge-noise model. We find that the power of the charge noise scales as the inverse of the channel length of the SWNT-FET. Our measurements also show that surprisingly the ionic strength of the surrounding electrolyte has a minimal effect on the noise magnitude in SWNT-FETs.     

Surface-enhanced Raman scattering on single-wall carbon nanotubes

Exploiting the effect of surface-enhanced Raman scattering (SERS), the Raman signal of single-wall carbon nanotubes (SWNTs) can be enhanced by up to 14 orders of magnitude when the tubes are in contact with silver or gold nanostructures and Raman scattering takes place predominantly in the enhanced local optical fields of the nanostructures. Such a level of enhancement offers exciting opportunities for ultrasensitive Raman studies on SWNTs and allows resonant and non-resonant Raman experiments to be done on single SWNTs at relatively high signal levels. Since the optical fields are highly localized within so-called "hot spots" on fractal silver colloidal clusters, lateral confinement of the Raman scattering can be as small as 5 nm, allowing spectroscopic selection of a single nanotube from a larger population. Moreover, since SWNTs are very stable "artificial molecules" with a high aspect ratio and a strong electron-phonon coupling, they are unique "test molecules" for investigating the SERS effect itself and for probing the "electromagnetic field contribution" and "charge transfer contribution" to the effect. SERS is also a powerful tool for monitoring the "chemical" interaction between the nanotube and the metal nanostructure.     

Structure of semidilute single-wall carbon nanotube suspensions and gels

The microscopic network structure of surfactant-stabilized single-wall carbon nanotubes (SWNTs) in water was investigated as a function of SWNT concentration in the semidilute (overlapping) regime using small-angle neutron scattering (SANS). Most of the samples exhibit rigid rod behavior (i.e., Q(-1) intensity variation) at large scattering wavevector, Q, and a crossover to network behavior (i.e., approximately Q(-2) intensity variation) at low Q. The mesh size, xi, of the network was determined from the crossover of rigid rod to network behavior in the SANS intensity profile and was found to decrease with increasing SWNT concentration. When the dispersion quality of these associating rigid rods was degraded, only approximately Q(-2) intensity variation was observed at both high and low Q. Small-angle X-ray scattering measurements of the same stable dispersions were relatively insensitive to network structure because of poor contrast between SWNTs and surfactant.     

In situ atomic force microscopy tip-induced deformations and Raman spectroscopy characterization of single-wall carbon nanotubes

In this work, an atomic force microscope (AFM) is combined with a confocal Raman spectroscopy setup to follow in situ the evolution of the G-band feature of isolated single-wall carbon nanotubes (SWNTs) under transverse deformation. The SWNTs are pressed by a gold AFM tip against the substrate where they are sitting. From eight deformed SWNTs, five exhibit an overall decrease in the Raman signal intensity, while three exhibit vibrational changes related to the circumferential symmetry breaking. Our results reveal chirality dependent effects, which are averaged out in SWNT bundle measurements, including a previously elusive mode symmetry breaking that is here explored using molecular dynamics calculations.     

A triple quantum dot in a single-wall carbon nanotube

A top-gated single-wall carbon nanotube is used to define three coupled quantum dots in series between two electrodes. The additional electron number on each quantum dot is controlled by top-gate voltages allowing for current measurements of single, double, and triple quantum dot stability diagrams. Simulations using a capacitor model including tunnel coupling between neighboring dots captures the observed behavior with good agreement. Furthermore, anticrossings between indirectly coupled levels and higher order cotunneling are discussed.     

Design criteria for transparent single-wall carbon nanotube thin-film transistors

A study based on two-dimensional percolation theory yielding quantitative parameters for optimum connectivity of transparent single-wall carbon nanotube (SWNT) thin films is reported. Optimum SWNT concentration in the filtrated solution was found to be 0.1 mg/L with a volume of 30 mL. Such parameters lead to SWNT fractions in the films of approximately Phi = 1.8 x 10(-3), much below the metallic percolation threshold, which is found to be approximately PhiC = 5.5 x 10(-3). Therefore, the performance of transparent carbon nanotube thin-film transistors is limited by the metallic SWNTs, even below their percolation threshold. We show how this effect is related to hopping or tunneling between neighboring metallic tubes.     

Thermal conductance and thermopower of an individual single-wall carbon nanotube

We have observed experimentally that the thermal conductance of a 2.76-microm-long individual suspended single-wall carbon nanotube (SWCNT) was very close to the calculated ballistic thermal conductance of a 1-nm-diameter SWCNT without showing signatures of phonon-phonon Umklapp scattering for temperatures between 110 and 300 K. Although the observed thermopower of the SWCNT can be attributed to a linear diffusion contribution and a constant phonon drag effect, there could be an additional contact effect.     

Voltage-induced dependence of Raman-active modes in single-wall carbon nanotube thin films

We report on electrical Raman measurements in transparent and conducting single-wall carbon nanotube (SWNT) thin films. Application of external voltage results in downshifts of the D and G modes and in reduction of their intensity. The intensities of the radial breathing modes increase with external electric field related to the application of the external voltage in metallic SWNTs, while decreasing in semiconducting SWNTs. A model explaining the phenomenon in terms of both direct and indirect (Joule heating) effects of the field is proposed. Our work rules out the elimination of large amounts of metallic SWNTs in thin film transistors using high field pulses. Our results support the existence of Kohn anomalies in the Raman-active optical branches of metallic graphitic materials.     

Molecular design of strong single-wall carbon nanotube/polyelectrolyte multilayer composites

The mechanical failure of hybrid materials made from polymers and single-wall carbon nanotubes (SWNT) is primarily attributed to poor matrix-SWNT connectivity and severe phase segregation. Both problems can be successfully mitigated when the SWNT composite is made following the protocol of layer-by-layer assembly. This deposition technique prevents phase segregation of the polymer/SWNT binary system, and after subsequent crosslinking, the nanometre-scale uniform composite with SWNT loading as high as 50 wt% can be obtained. The free-standing SWNT/polyelectrolyte membranes delaminated from the substrate were found to be exceptionally strong with a tensile strength approaching that of hard ceramics. Because of the lightweight nature of SWNT composites, the prepared free-standing membranes can serve as components for a variety of long-lifetime devices.     

Temperature dependence of electron-to-lattice energy transfer in single-wall carbon nanotube bundles

The electron-phonon coupling strength in single-wall carbon nanotube (SWNT) bundles has been studied directly in the time domain by femtosecond time-resolved photoelectron spectroscopy. We have measured the dependence of H(Te, Tl), the rate of energy transfer between the electronic system and the lattice as a function of electron and lattice temperatures Te and Tl. The experiments are consistent with a T5 dependence of H on the electron and lattice temperatures, respectively. The results can be related to the e-ph mass enhancement parameter lambda. The experimentally obtained value of for lambda/[symbol: see text] D2, where [symbol: see text] D is the Debye temperature, suggests that e-ph scattering times at the Fermi level of SWNT bundles can be exceptionally long, exceeding 1.5 ps at room temperature.     

Thermal conductance of an individual single-wall carbon nanotube above room temperature

The thermal properties of a suspended metallic single-wall carbon nanotube (SWNT) are extracted from its high-bias (I-V) electrical characteristics over the 300-800 K temperature range, achieved by Joule self-heating. The thermal conductance is approximately 2.4 nW/K, and the thermal conductivity is nearly 3500 Wm(-1)K(-1) at room temperature for a SWNT of length 2.6 mum and diameter 1.7 nm. A subtle decrease in thermal conductivity steeper than 1/T is observed at the upper end of the temperature range, which is attributed to second-order three-phonon scattering between two acoustic modes and one optical mode. We discuss sources of uncertainty and propose a simple analytical model for the SWNT thermal conductivity including length and temperature dependence.     

单壁碳纳米管无纺布/环氧树脂复合材料的电磁屏蔽性能

采用一种导电材料预制体-单壁碳纳米管(Single-wall carbon nanotube,SWCNT)无纺布与环氧树脂复合制备了电磁屏蔽复合材料,并对所制复合材料的电磁屏蔽性能进行了表征。结果表明:所制复合材料对电磁波的屏蔽效率随SWCNT无纺布厚度的增加而增加。在较低的SWCNT无纺布填加量下所制复合材料可以实现对低频电磁波较高的屏蔽效率。不同于填加粉体导电材料所制电磁屏蔽复合材料,作为导电材料预制体使用的SWCNT无纺布是一个独立的整体导电薄膜,可以直接引入到基体当中,不存在分散问题。并且通过简单的导电预制体多层叠加的方式即可实现复合材料更高的屏蔽效率。     

Microfabrication and characterization of spray-coated single-wall carbon nanotube film strain gauges

We present the design, fabrication, and characterization results of single-wall carbon nanotube (SWCNT) film strain gauges for potential applications as highly sensitive strain, weight, or pressure sensors on the macro-scale. A batch microfabrication process was developed for practical device construction and packaging using spray-coated SWCNTs and a conventional semiconductor process. The prototype was characterized using a commercial metal foil gauge with tensile and compressive testing on a binocular load cell. Our test results demonstrated that the proposed SWCNT film gauges have a linear relationship between resistance changes and externally applied strain. The gauge factor ranged from 7.0 to 16.4 for four different micro-grid configurations, indicating that the maximum strain sensitivity of the prototype was approximately eight times greater than that of commercial gauges.     

A parametric study of single-wall carbon nanotube growth by laser ablation

Results of a parametric study of carbon nanotube production by the double-pulse laser oven process are presented. The effect of various operating parameters on the production of single-wall carbon nanotubes (SWCNTs) is estimated by characterizing the nanotube material using analytical techniques, including scanning electron microscopy, transmission electron microscopy, thermo gravimetric analysis and Raman spectroscopy. The study included changing the sequence of the laser pulses, laser energy, pulse separation, type of buffer gas used, operating pressure, flow rate, inner tube diameter, as well as its material, and oven temperature. It was found that the material quality and quantity improve with deviation from normal operation parameters such as laser energy density higher than 1.5 J/cm2, pressure lower than 67 kPa, and flow rates higher than 100 sccm. Use of helium produced mainly small diameter tubes and a lower yield. The diameter of SWCNTs decreases with decreasing oven temperature and lower flow rates.