Substitution of Antibody with Molecularly Imprinted Film in Enzyme-Linked Immunosorbent Assay for Determination of Trace Ractopamine in Urine and Pork Samples

A new direct competitive enzyme-linked immunosorbent assay (ELISA) with molecularly imprinted film as artificial antibody was developed to detect ractopamine (RAC) in urine and pork samples. The imprinted film was directly synthesized on the well surface of 96-well plate by an organic–inorganic hybrid technology and evaluated by fourier transform infrared (FT-IR), static, and kinetic adsorption experiments. The imprinted film exhibited an antibody-like binding ability and rapid adsorption speed. The established ELISA method gave a good sensitivity (IC₅₀, 15.77 μg L⁻¹) and a low detection limit (IC₁₅, 0.01 μg L⁻¹) for RAC under the optimum conditions, and it was applied to the determination of RAC in urine and pork samples spiked at three levels with recoveries ranging from 77.7% to 108.9% (urine) and from 93.5% to 101.1% (pork). The obtained results, which correlated well with those gained from the traditional high performance liquid chromatography (HPLC) method, demonstrated that the developed ELISA method was reliable for RAC determination in real samples.     

Determination of Melamine in Liquid Milk and Milk Powder by Titania-Based Ligand-Exchange Hydrophilic Interaction Liquid Chromatography

A simple and rapid high-performance liquid chromatography (HPLC) procedure for the analysis of melamine in liquid milk and milk powder has been developed. Decrease of acetonitrile percentage and phosphate buffer concentration in mobile phase, and lowering of buffer pH and column temperature would benefit the retention of melamine on titania. Taking advantage of the ligand-exchange and hydrophilic interaction mixed retention mode on bare titania column, neither complex pretreatment nor ion-pair reagent was required. The whole analysis for one sample including sample pretreatment and HPLC analysis could be accomplished within 30 min. The method presented good linearity (R ² = 0.9998) in a wide range of 0.02–10 μg mL⁻¹. The limit of detection (3σ) and limit of quantification (10σ) of the method were 6 and 20 μg L⁻¹, respectively, which were equivalent to 15 and 50 μg kg⁻¹ melamine in liquid milk, 60 and 200 μg kg⁻¹ melamine in milk powder, respectively. Such sensitivity could be compared with those obtained by HPLC with solid-phase extraction or HPLC coupled with tandem mass spectrometry and was adequate for the screening of melamine in tainted dairy products. The repeatability (RSDs) of the retention times and peak areas of 11 replicate detections of 1.0 μg mL⁻¹ melamine were 0.32% and 2.5%, respectively. The intermediate precision on three consecutive days (RSDs, n = 6) of the retention times and peak areas were 1.1% and 2.3%, respectively. The recovery of spiked melamine in dairy samples ranged from 95.2% to 105%. The simplicity, sensitivity and rapidity of the proposed method make it an effective alternative detecting technique for melamine.     

Determination and Evaluation of the Mineral Composition of Chinese Cabbage (Beta vulgaris)

Inductively coupled plasma optical emission spectrometry was used to determine the elements present in Chinese cabbage (Beta vulgaris). The accuracy of the method was confirmed by analysis of a certified reference material of spinach leaves. The study involved 57 samples that were collected in 13 Brazilian cities. Average concentrations of elements found per gram of Chinese cabbage were as follows: 3.44 mg g⁻¹ sodium, 5.09 mg g⁻¹ potassium, 1.25 mg g⁻¹ phosphorous, 0.85 mg g⁻¹ calcium, 0.49 mg g⁻¹ magnesium, 2.79 μg g⁻¹ manganese, 9.50 μg g⁻¹ iron, 0.74 μg g⁻¹ copper, 14.28 μg g⁻¹ zinc, and 6.44 μg g⁻¹ strontium. Principal component analysis and hierarchical cluster analysis demonstrated that there is no systematic difference in the mineral composition between the cabbage samples that were analyzed.     

On-line Solid-Phase Extraction Coupled to Liquid Chromatography–Ion Trap Tandem Mass Spectrometry for Determination of Penicillins in Catfish

A highly selective method was developed for the simultaneous determination of eight penicillins in catfish using automated on-line solid-phase extraction coupled to liquid chromatography–tandem mass spectrometry (XLC–MS/MS). The type of cartridge, equilibration sample volume, volume of solvent to carry the sample into the cartridge, and elution times were studied in order to optimize the XLC operating conditions. MS/MS conditions were also adjusted for better peak resolution. The present method was validated in agreement with the criteria of Commission Decision 2002/657/EC, showing a linear range from 2 to 350 μg kg⁻¹ and regression coefficient higher than 0.995 for the studied penicillins. Decision limits, calculated in the case of substances with no permitted limit, were lower than 0.6 μg kg⁻¹, and detection capability values were lower than 2.0 μg kg⁻¹. Samples spiked at 2.0, 10.0, and 50.0 μg kg⁻¹ showed high recovery (72–92%) and precision values lower than 20% except for amoxicillin. The present method was also applied for the analysis of penicillins in 30 catfish samples bought in local markets.     

Quantitative Determination and Confirmation of Five Synthetic Glucocorticoid Residues in Milk Powder by Gel Permeation Chromatography–Liquid Chromatography–Tandem Mass Spectrometry

A new method for multi-residue determination of five synthetic glucocorticoids (betamethasone, dexamethasone, prednisone, prednisolone, and hydrocortisone) in milk powder is developed. The glucocorticoids in the samples were extracted with tert-butyl methyl ether under ultrasonication incubation, and then cleaned up through gel permeation chromatography. After C18 LC gradient elution separation using acetonitrile with 0.1% formic acid as a mobile phase, the eluents were determined by liquid chromatography–tandem mass spectrometry with multiple reaction monitoring and positive ionization modes. The effective separation for the five glucocorticoids was achieved. The limit of quantification of the method for testing five glucocorticoids in milk powder was in the range from 0.2 to 0.5 μg kg⁻¹, which was lower than the maximum residue limits established by European Union for glucocorticoids in foods. Experiments on spiked samples of milk powder showed that the mean recoveries at addition level of 1.0, 3.0, and 5.0 μg kg⁻¹ were in the range of 71.2% and 103%, and the relative standard deviation ranged from 4.7% to 16.8%. The calibration curves for these drugs between 1.0 and 100 μg l⁻¹ showed good linearity, with correlation coefficient (r) more than 0.999. The real sample test showed that this method is sensitive and accurate. It can be used for qualitative and quantitative determination of studied glucocorticoid residues in milk powder samples.     

Total Mercury, Inorganic Mercury and Methyl Mercury Determination in Red Wine

This study deals with the development of a method for total Hg, inorganic Hg and methylmercury (MeHg) determination in red wine by using flow injection-cold vapour generation–inductively coupled plasma mass spectrometry (FI-CVG-ICP-MS) and gas chromatography-ICP-MS (GC-ICP-MS). For Hg speciation analysis, a derivatization step was carried out using a 1% (m/v) sodium tetraphenylborate (NaBPh₄) solution, followed by extraction of Hg species and their quantification by GC-ICP-MS. The main parameters evaluated were the make-up gas flow rate, volume of the NaBPh₄ solution, time for derivatization reaction/analyte extraction and solvent used for Hg species extraction. Accuracy was evaluated by analyte recovery, whereas recoveries ranged from 99% to 104% for Hg(II) and MeHg. The limits of detection (LODs) for Hg(II) and MeHg were 0.77 and 0.80 μg L⁻¹, respectively. Wine from Argentina, Brazil, Chile and Uruguay were analysed. The wine samples were also acid digested for total Hg determination by FI-CVG-ICP-MS. The LOD of the method used for total Hg determination was 0.01 μg L⁻¹. The concentrations of Hg species in red wine measured by GC-ICP-MS were lower than the respective LODs. Only total Hg was detected in the analysed samples, where the highest concentration of Hg found was 0.55 ± 0.02 μg L⁻¹.     

Determination of Copper,Cobalt, Lead,and Iron in Table Salt by FAAS After Separation Using Violuric Acid and Multiwalled Carbon Nanotubes

A separation–enrichment technique for the determination of trace amounts of copper(II), cobalt(II), lead(II), and iron(III) as violuric acid chelates on multiwalled carbon nanotubes at pH 6.0 was established. Analytes were determined by flame atomic absorption spectrometry. The effects of some analytical parameters like pH, amounts of violuric acid, flow rates, eluent type, and sample volume were investigated. The influences of the matrix ions were also investigated. The relative standard deviations for analyte elements were below 10%. The quantification limits of the analyte ions were found as 0.36 μg g⁻¹ for copper, 0.43 μg g⁻¹ for lead, 0.15 μg g⁻¹ for cobalt, and 0.38 μg g⁻¹ for iron. The accuracy of presented method was checked by the analysis of TMDA 54.4 fortified lake water, NIST SRM 1515 apple leave, and HR-1 Humber river sediment certified reference materials. The method was applied to analyte contents of table salt samples from different origin. The levels of iron in the analyzed table salt samples were found in the range of 1.6–6.4 μg g⁻¹, while lead was found in only one sample as 5.0 μg g⁻¹. In all other samples, cobalt, lead, and copper were found below the quantification limits of the analytes.     

Properties of <Emphasis Type="Italic">Aspergillus subolivaceus</Emphasis> free and immobilized dextranase

Aspergillus subolivaceus dextranase is immobilized on several carriers by entrapment and covalent binding with cross-linking. Dextranase immobilized on BSA with a cross-linking agent shows the highest activity and considerable immobilization yield (66.7%). The optimum pH of the immobilized enzyme is shifted to pH 6.0 as compared with the free enzyme (pH 5.5). The optimum temperature of the reaction is resulted at 60 °C for both free and immobilized enzyme. Thermal and pH stability are significantly improved by the immobilization process. The calculated K _m of the immobilized dextranase (14.24 mg mL⁻¹) is higher than that of the free dextranase (11.47 mg mL⁻¹), while V _max of the immobilized enzyme (2.80 U μg protein⁻¹) is lower than that of the free dextranase (11.75 U μg protein⁻¹). The immobilized enzyme was able to retain 76% of the initial catalytic activity after 5.0 cycles.     

Determination of Nitrite and Nitrate in Brazilian Meats Using High Shear Homogenization

Nitrate and nitrite are usually added to processed meat products to protect against the growth of microorganisms. Two sample preparation methodologies using either manual grinding (with a mortar and pestle) or mechanical high shear homogenization were investigated and compared. The results showed that high shear homogenization was the most suitable for the extraction of nitrite and nitrate from ham, salami, and bacon samples, achieving high extraction recoveries (>98%) together with low relative standard deviations (RSDs) for the samples analyzed. Analyses were performed using capillary electrophoresis. A running buffer consisting of 60 mmol L⁻¹ tetraborate and 0.2 mmol L⁻¹ cetyltrimethylammonium bromide enabled separation of the analytes in <5 min. In validation experiments, good repeatability was obtained for both migration times (<0.8% RSD) and peak areas (<1.1% RSD). Analytical curves for nitrite and nitrate were linear (r > 0.998) in the 0.2- to 2.5-mg L⁻¹ and 0.5- to 5-mg L⁻¹ concentration ranges, respectively. The limits of detection were 0.15 mg L⁻¹ for nitrite and 0.17 mg L⁻¹ for nitrate. The method developed was applied to the analysis of different kinds of meats (sausage, ham, salami, bacon, and others) produced in Brazil. The ranges of concentration found were 17.3–46.4 mg kg⁻¹ (nitrite) and 69.9–198.1 mg kg⁻¹ (nitrate). The contents of nitrate and nitrite in the samples were below the Brazilian legislation limit values (150 and 300 mg kg⁻¹ for nitrite and nitrate, respectively).     

Quality of mashed potatoes: effect of adding blends of kappa-carrageenan and xanthan gum

Blends of kappa-carrageenan (K) and xanthan gum (X) were added to mashed potatoes. Product was tested by instrumental texture profile analysis and cone penetration tests, oscillatory and steady rheology, colour, drip loss, total soluble solids and sensory analyses. A central composite rotatable design was used to study the effects of variation in levels of K (1.5–4.5 g kg⁻¹) and X (0.5–2.5 g kg⁻¹) concentrations. Addition of K had a major impact on gel strength, viscoelastic behaviour, sensory attributes and overall acceptability, whereas addition of X influenced textural and steady properties and colour. Mainly, elastic modulus (G′) was strongly dependent on the K concentration in mashed potatoes containing amylose. As compared to mashed potatoes with 1.5 g kg⁻¹ added X, additional incorporation of 5.12 g kg⁻¹ K increased G′ approximately twofold, possibly due to exclusion effect of the swollen starch granules and synergistic effect of K and denatured protein. The function of X in the mashed potatoes may in fact be confined to that of a filler rather than a dynamic constituent, although it does affect yield stress behaviour. When K/X blends (each biopolymer at 1.5 g kg⁻¹) were included in the formulation, the product exhibited very acceptable sensory quality. K provided the appropriate texture, while X imparted creaminess and mouthfeel to the product.     

Optimization and Modeling of Process Parameters for Lipase Production by Bacillus brevis

Statistical evaluation of fermentation conditions and nutritional factors by Plackett–Burman two-level factorial design followed by optimization of significant parameters using response surface methodology for lipase production by Bacillus brevis was performed in submerged batch fermentation. Temperature, glucose, and olive oil were found to be the significant factors affecting lipase production. Maximum lipase activity of 5.1 U ml⁻¹ and cell mass of 1.82 g l⁻¹ at 32 h were obtained at the optimized conditions of temperature, 33.7 °C; initial pH, 8; and speed of agitation, 100 rpm, with the medium components: olive oil, 13.73 ml l⁻¹; glucose, 13.98 g l⁻¹; peptone, 2 g l⁻¹; Tween 80, 5 ml l⁻¹; NaCl, 5 g l⁻¹; CH₃COONa, 5 g l⁻¹; KCl, 2 g l⁻¹; CaCl₂·2H₂O, 1 g l⁻¹; MnSO₄·H₂O, 0.5 g l⁻¹; FeSO₄·7H₂O, 0.1 g l⁻¹; and MgSO₄·7H₂O, 0.01 g l⁻¹. The lipase productivity and specific lipase activity were found to be 0.106 U (ml h)⁻¹ and 2.55 U mg⁻¹, respectively. Unstructured kinetic models and artificial neural network models were used to describe the lipase fermentation. The kinetic analysis of the lipase fermentation by B. brevis shows that lipase is a growth-associated product.     

Micelle-Mediated Extraction and Flame Atomic Absorption Spectrometric Method for Determination of Trace Cobalt Ions in Beverage Samples

A new method has been developed for preconcentration of cobalt at trace levels in beverage samples using calcon carboxylic acid as chelating agent and cetyl pyridinium chloride as an auxiliary ligand and entrapped into Triton X-114 prior to its determination by flame atomic absorption spectrometry (FAAS). The main parameters affecting cloud point extraction (CPE) efficiency such as pH, concentration of the complexing agent, cationic and nonionic surfactant concentration, salt effect, the equilibrium time, and temperature were investigated and optimized. After optimization of the CPE conditions, a preconcentration factor of 60, an enhancement factor of 106, and a detection limit of 0.20 μg L⁻¹ by (R ² = 0.9978) were obtained from a calibration curve constructed in the range of 0.7–100 μg L⁻¹. The proposed preconcentration procedure was successfully applied to the determination of cobalt ions in some real samples including natural drinking water, tap water, and beer and wine samples. The accuracy and validity of the proposed CPE/FAAS method was tested by means of five repeated analysis of reference standard materials (TM-253, a low level fortified water standard for trace elements). A good agreement between analytical results (28.8 and 28.5 μg L⁻¹ with calibration curve and standard addition curve method, respectively) and certified value (27.9 μg L⁻¹) for Co (p < 0.05) were obtained and verified by means of calibration curve and standard addition curve method using CPE procedure.     

Benzo[a]pyrene and total polycyclic aromatic hydrocarbons (PAHs) levels in vegetable oils and fats do not reflect the occurrence of the eight genotoxic PAHs

Concentrations of polycyclic aromatic hydrocarbons (PAHs) were determined in 115 samples of olive oil (extra virgin olive oil, virgin olive oil, olive oil, pomace olive oil and blended olive oil), cooking oil (corn oil, sunflower oil, sesame oil, palm olein oil, soya oil, canola oil, mustard oil, peanut oil and mixed vegetable oil) and fat (butter and table margarine) collected from retail stores in Kuwait. Carcinogenic benzo[a]pyrene (BaP) was detected in 43% of the samples analyzed. Benz[a]anthracene and chrysene were detected in 37 and 45% of the samples, respectively, that did not contain BaP. Of the individual non-carcinogenic PAHs, naphthalene showed the highest mean concentration (14 µg kg^?1), while for the carcinogenic PAHs, BaP (0.92 µg kg^?1) and chrysene (0.87 µg kg^?1) showed the highest mean values. Approximately 20% of the samples within the olive oil and cooking oil sub-categories exceeded the EU maximum tolerable limit for BaP, with the highest level of 6.77 and 11.1 µg kg^?1, respectively. For the fat sub-category, 9% of the samples exceeded the tolerance limit, with the highest level of 3.67 µg kg^?1. The Kuwaiti general population's dietary exposure to the genotoxic PAHs (PAH8: benz[a]anthracene, chrysene, benzo[b]fluoranthene, benzo[k]fluoranthene, benzo[a]pyrene, indeno[1,2,3-cd]pyrene, dibenz[a,h]anthracene and benzo[ghi]perylene) was estimated to be 196 ng day^?1 (3.3 ng kg^?1 bw day^?1, assuming an average adult body weight of 60 kg). Results indicated that PAH8 and BaP_eq (total sum benzo[a]pyrene equivalents) are more reliable measures of the concentrations of other carcinogenic PAHs in oil and fat samples, while BaP and PAHs alone are not good indicators of the occurrence or degree of contamination by carcinogenic PAHs in these food products.     

Simultaneous and Direct Determination of As, Bi, Pb, Sb, and Se and Co, Cr, Cu, Fe, and Mn in Milk by Electrothermal Atomic Absorption Spectrometry

Tungsten permanent modifier with coinjection of Pd(NO₃)₂ and W–Ru permanent modifiers are proposed for the direct and simultaneous determination of As, Bi, Pb, Sb, and Se (group 1) and Co, Cr, Cu, Fe, and Mn (group 2), respectively, in milk by graphite furnace atomic absorption spectrometry. The performance of modifiers was evaluated by means of thermal behavior of analytes, sensitivity, atomic signal profile, repeatability, graphite tube lifetime, and background intensity. An air-assisted pyrolysis step was necessary to quantitative elimination of the organic matter. After methods optimization, 14 commercial milk samples were analyzed. The found concentrations of As, Bi, Pb, Sb, Se, Co, and Cr were lower than their limit of detection (2.13, 2.21, 1.49, 1.63, 2.05, 1.0, and 1.2 μg L⁻¹, respectively). Concentrations of Cu, Fe, and Mn were in the 1.58–5.74 μg L⁻¹, 9.79–49.3 μg L⁻¹, and 2.25–4.08 μg L⁻¹ intervals, respectively. The limits of detection for Cu, Fe, and Mn were 1.7, 5.3, and 2.0 μg L⁻¹, respectively. The accuracy of methods was checked after analysis of two milk standard materials. Results for Cr, Cu, Fe, Mn, Pb, and Mn were in agreement with certified values of SRMs at the 95% confidence level. Accuracy was also evaluated by addition–recovery tests and recoveries in the 86–127% range were obtained for all elements. The use of pretreat platform of graphite tubes with W or W–Ru allowed enlarging the lifetime of atomizer in 750 heating cycles.     

Occurrence of Aflatoxins and Ochratoxin A in Baby Foods in Portugal

Infants have a more restricted diet and they generally consume more food on a body weight basis than adults. Therefore, the significance and potential health risk of any contaminant in foods consumed by infants is increased and diligent attention must be paid to this particular area. The present study aims to determine the occurrence of aflatoxin M₁ (AFM₁), aflatoxin B₁ (AFB₁) and ochratoxin A (OTA) in processed cereal-based foods (flours) and infant formulae (milk powder) available in the Portuguese market, both sold as conventional and organic origin. Mycotoxin determination was carried out using a method previously applied to duplicate diet samples. This method employed chloroform extraction, liquid–liquid extraction, immunoaffinity column (IAC) cleanup and HPLC analysis with fluorescence detection after post-column derivatisation. Quantification limits were 0.014, 0.004 and 0.028 μg kg⁻¹ for AFM₁, AFB₁ and OTA, respectively. These toxins could only be quantified in 12 of 27 analysed samples (15 positive results): two samples with AFM₁, two samples with AFM₁ and OTA, one sample with AFB₁ and OTA and seven samples with OTA. Positive results concerned four for AFM₁ (26%), one for AFB₁ (7%) and ten for OTA (67%). For these samples, contents ranged between 0.017–0.041 μg AFM₁ kg⁻¹, 0.034–0.212 μg OTA kg⁻¹, and one sample had a value of 0.009 μg AFB₁ kg⁻¹. Considering the presented results, we could provisionally conclude that the presence of these mycotoxins in baby foods does not constitute a public health problem. These are the first results concerning the occurrence of mycotoxins in marketed baby foods in Portugal and this is the first study using the HPLC method, proposed for duplicate diets, in baby food sample analysis.     

Determination of Histamine in Some Foods by Isotachophoretic Method with Simple Sample Preparation

A one-dimensional capillary isotachophoretic method in cationic system of the separation has been applied for histamine determination in food samples. The proposed electrolyte system consisted of 0.01 M potassium hydroxide with l-valine to pH = 9.9 as the leading electrolyte and 0.02 M 2-amino-2-hydroxymethyl-propane-1,3-diol adjusted to pH = 8.3 with 0.1 M hydrochloric acid as terminating electrolyte. Proposed method was characterized by linearity range 5–50 mg L⁻¹ and R ² = 0.9982, accuracy (recoveries ranged from 95% to 102%), detection (2.10 mg L⁻¹), and quantification (7.01 mg L⁻¹) limits. The sample preparation for proposed electrophoretic method included only simple extraction with trichloroacetic acid with filtration and derivatisation stage are avoided. The histamine concentration was determined in meat (turkey, chicken, beef and pork) and meat products (ripened sausage and dry-cured ham), fish (smoked salmon and mackerel), and different kind of mildew and mold ripened cheeses samples. The histamine content ranged from not detected level for fresh meat to 29.63 mg 100 g⁻¹ for cheese samples. The reversed phase HPLC was applied as reference method and the F-Snedecor test and the t test were employed to compare the precision and accuracy of the both methods. Positive correlations were found between the two analytical methods for histamine determination in food products. The obtained results indicate that the proposed electrophoretic method is simple, precise, accurate, and convenient.     

ITS-RFLP characterization of black <Emphasis Type="Italic">Aspergillus</Emphasis> isolates responsible for ochratoxin A contamination in cocoa beans

In the present study, ochratoxigenic mycobiota in cocoa beans was identified at species level by digestion of the ITS products using the endonucleases HhaI, NlaIII and RsaI. Of the 132 isolates of Aspergillus section Nigri collected from cocoa beans, 89 were identified as A. tubingensis, 27 as A. niger, 10 as A. tubingensis-like and 6 as A. carbonarius. No variation was observed between RFLP patterns (C, N, T1 and T2) described previously for grape isolates and those of the cocoa isolates analysed. With respect to OTA-producing fungi, a high percentage of black aspergilli (50.7%) was able to produce OTA. Additionally, most of the OTA-producing isolates were of moderate toxigenicity, producing amounts of OTA from 10 μg g⁻¹ to 100 μg g⁻¹. Percentages of OTA-producing isolates in the A. niger aggregate were higher than in other substrates, ranging from 30% to 51.7%. Furthermore, the detected levels of OTA production in the A. niger aggregate, particularly in A. tubingensis species was higher than in A. carbonarius, ranging from 0.7 μg g⁻¹ to 120 μg g⁻¹ (mean 24.55 μg g⁻¹). Due to the high occurrence, percentage of ocratoxigenic isolates and their ability to produce OTA, isolates belonging to the A. niger aggregate could be considered as the main cause of OTA contamination in cocoa beans used for manufacturing cocoa products.     

Development of an ELISA Reverse-Based Assay to Assess the Presence of Mycotoxins in Cereal Flour

The first successful application of the ELISA reverse method and device (ER m&d), in the context of food safety and traceability, was developed in our laboratories to detect and quantify CP4EPSPS and Cry1AB genetically modified related proteins in soy and maize samples, respectively. To prove the versatility and the transferability of the technology, the ER was here applied to assess the presence of mycotoxins in cereals. Appropriate protocols were developed to assess the presence of deoxynivalenol and ochratoxin A and the ER was tested on contaminated wheat samples. In particular, deoxynivalenol (DON) and ochratoxin A (OTA) were detected in a range of values from 430 to 5,000 μg kg⁻¹ and from 1.7 to 10 μg kg⁻¹, respectively. The assays were optimized to reach a limit of quantification equal to 550 and 1.8 μg kg⁻¹ for DON and OTA, respectively.     

Effect of dynamic high-pressure microfluidization at different temperatures on the antigenic response of bovine β-lactoglobulin

The antigenic response of β-lactoglobulin (β-Lg), treated by dynamic high-pressure microfluidization (DHPM) at different temperatures, was determined by an indirect competitive enzyme-linked immunosorbent assay using polyclonal antibodies from rabbit serum. DHPM treatment causes changes in the protein structure and may influence the antigenicity of β-Lg. DHPM treatment of β-Lg at 90 °C showed significant effects with the antigenic response of 5.2 μg mL⁻¹ (untreated), 45 μg mL⁻¹ (40 MPa), 79 μg mL⁻¹ (80 MPa), 132 μg mL⁻¹ (120 MPa), and 158 μg mL⁻¹ (160 MPa). In combination with temperature treatment (70–90 °C), the antigenic response enhanced as the temperature increased at 160 MPa. The β-Lg antigenicities were about 14, 108, and 158 μg mL⁻¹ at 70, 80, and 90 °C, respectively. However, the influence of DHPM pressures on the antigenic response of β-Lg standards was different. DHPM modified β-Lg standards showed a remarkable increase in antigenicity when treated to 80 MPa. Above 80 MPa, the antigenic response decreased.     

An approach to improve ACE-inhibitory activity of casein hydrolysates with plastein reaction catalyzed by Alcalase

The preparation method of casein hydrolysates with high ACE-inhibitory activity was studied by Alcalase-catalyzed hydrolysis coupled with plastein reaction. Casein hydrolysates with an IC₅₀ value of about 47 μg mL⁻¹ were first prepared by hydrolysis of casein with Alcalase and then modified with plastein reaction catalyzed by the same enzyme. The impacts of four reaction conditions on plastein reaction of casein hydrolysates were studied, and then optimal conditions were determined using response surface methodology with the decrease of free amino groups in the reaction mixture as response. When the concentration of casein hydrolysates was fixed at 35% by weight, the maximum decrease of free amino groups in the reaction mixture of 181.8 μmol g⁻¹ proteins was obtained. The optimum conditions for the above decrease were found to be an E/S ratio of 7.7 kU g⁻¹ proteins, reaction temperature of 42.7 °C and reaction time of 6 h. Analysis results showed that ACE-inhibitory activity of casein hydrolysates prepared could be improved significantly by plastein reaction. When casein hydrolysates were modified by plastein reaction, with a decrease of free amino groups in the mixture of about 154.7 μmol g⁻¹ proteins and 181.8 μmol g⁻¹ proteins, their IC₅₀ values could be decreased to 0.6 and 0.5 μg mL⁻¹.