聚丙烯接枝改性研究进展

文章对聚丙烯(PP)接枝改性的几种方法及其研究进展进行了综述,其中包括溶液法接枝、悬浮法接枝、熔融法接枝、固相法接枝、辐射法接枝以及超临界CO2法接枝等,并且对各种不同接枝方法的优劣性进行了讨论,指出固相法接枝和超临界CO2法接枝是相对环保、实用的聚丙烯接枝改性方法。并且对聚丙烯接枝改性的发展方向进行了展望。     

超临界CO2协助固相接枝改性PP研究进展

聚丙烯(PP)接枝改性方法很多,其中超临界CO2协助固相接枝法是一种高效节能的方法。系统地比较了各种接枝方法,综述了超临界CO2协助固相接枝聚丙烯时超临界流体的优点和作用,介绍了超临界CO2溶胀聚丙烯过程各参数的影响,同时对聚丙烯固相接枝反应的影响因素进行了论述,并简单概括了接枝产物的各种表征手段及应用。     

超临界CO2对改善聚丙烯固相接枝过程的作用及影响因素研究进展

介绍了超临界CO2对聚丙烯固相接枝改性的协助作用,系统讨论了超临界CO2协助技术的优点、协助作用和渗透机理、溶胀过程中各因素对接枝反应的影响以及引发剂和单体的选择.超临界CO2协助固相接枝技术,后处理简单,PP降解程度轻,能够改善接枝过程的不均匀性,是很有发展前景的PP功能化改性方法.     

马来酸酐固相接枝聚丙烯纤维

了提高非极性聚丙烯纤维(PP)的相容性,采用固相法以马来酸酐(MAH)对聚丙烯纤维进行接枝改性,研究了反应条件对接枝率的影响。结果表明,马来酸酐成功接枝到聚丙烯上,当反应温度为80℃,PP用量为0.5 g,MAH用量为0.2 g,BPO用量为0.05 g,回流时间为2.5 h时,最大接枝率可达到7.51%;BPO的用量、MAH单体的用量以及反应温度对PP纤维的接枝率影响较大。而测定PP纤维接枝率时回流时间对其接枝率的影响不大;接枝聚丙烯纤维的分解温度明显高于纯聚丙烯纤维。     

聚丙烯／轻质碳酸钙／三单体固相接枝物复合体系结构与性能的研究

将聚丙烯与马来酸酐、甲基丙烯酸甲酯、丙烯酸丁酯三种单体的固相接枝物应用于聚丙烯侥质碳酸钙复合体系，研究接枝物对复合体系力学性能、微观形态和耐热性等的影响。结果表明，在PP中加入CaCO3进行填充改性，在一定用量的三单体固相接枝物作用下，PP的力学性能及耐热性得到明显的提高。     

聚丙烯固相接枝苯乙烯和丙烯酸乙酯的研究

用固相接枝共聚方法制备聚丙烯（PP）接枝聚苯乙烯（PP-g-PS)和聚丙烯接枝聚丙烯酸乙酯（PP-g-PEA)，考察了引发剂浓度、反应温度、反应时间与单体种类对接枝反应的影响，对接枝改性的PP进行结构和热分析表征，并用接枝功能化的聚丙烯做增容剂，研究了其对纳米SiO2/PP复合材料力学性能的影响。力学性能研究表明：低含量接枝聚丙烯的存在可使SiO2/PP复合材料的韧性大幅提高。     

聚丙烯化学改性方法

综述了聚丙烯的化学改性方法,包括接枝、交联、共聚等,接枝主要包括熔融接枝、溶液接枝、悬浮接枝、辐射接枝、超临界CO2协助接枝、固相接枝及非极性单体在PP上的接枝,交联改性主要包括有机氧化物交联、氮化物交联、辐射交联及等离子体交联,最后简要介绍了共聚改性以及PP改性的最新进展.     

固相接枝共聚法制备PP—g—PS

用固相接枝共聚方法制备了聚丙烯接枝苯乙烯(PP-g-PS),详细地考察了聚丙烯与引发剂的品种、反应温度、苯乙烯及引发剂的浓度等因素对接枝率和接枝效率的影响。研究结果表明:PP-g-PS具有较高的接技率,应用于聚丙烯/聚苯乙烯(PP/PS)共混物中,能降低分散相PS的粒径,提高PP/PS的相容性。     

聚丙烯固相接枝的研究及应用进展

综述了聚丙烯(PP)固相接枝技术的研究进展,重点介绍了固相接枝的机理及分类,讨论了一些主要因素如引发剂,辐射或预辐射剂量,光敏剂和光照时间对接枝率的影响,并简要介绍了聚丙烯接枝物的应用前景和固相接枝设备的发展。     

马来酸酐接枝聚丙烯流变性能的研究

用毛细管流变仪和DSC方法研究了马来酸酐接枝改性的聚丙烯(PP g MA)对PP/PP g MA共混体系流变性和热行为的影响。结果表明,在聚丙烯(PP)中加入固相接枝反应得到的PP g MA,在剪切应力作用下,粘度下降很快;并且该体系的熔点和熔程都有显著变化。     

Insect antifeedant properties of anthranoids from the genusVismia

Vismiones and ferruginins, representatives of a new class of lypophilic anthranoids from the genusVismia were found to inhibit feeding in larvae of species ofSpodoptera, Heliothis, and inLocusta migratoria.     

Direct observation of freeze-thaw instability of latex coatings via high pressure freezing and cryogenic SEM

Despite its industrial importance, the subject of freeze-thaw (F/T) stability of latex coatings has not been studied extensively. There is also a lack of fundamental understanding about the process and the mechanisms through which a coating becomes destabilized. High pressure (2100 bar) freezing fixes the state of water-suspended particles of polymer binder and inorganic pigments without the growth of ice crystals during freezing that produce artifacts in direct imaging scanning electron microscopy (SEM) of fracture surfaces of frozen coatings. We show that by incorporating copolymerizable functional monomers, it is possible to achieve F/T stability in polymer latexes and in low-VOC paints, as judged by the microstructures revealed by the cryogenic SEM technique. Particle coalescence as well as pigment segregation in F/T unstable systems are visualized. In order to achieve F/T stability in paints, latex particles must not flocculate and should provide protection to inorganic pigment and extender particles. Because of the unique capabilities of the cryogenic SEM, we are able to separate the effects of freezing and thawing, and study the influence of the rate of freezing and thawing on F/T stability. Destabilization can be caused by either freezing or thawing. A slow freezing process is more detrimental to F/T stability than a fast freezing process; the latter actually preserves suspension stability during freezing. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004 in Chicago, IL. Tied for first place in The John A. Gordon Best Paper Competition.     

Ethanol and (−)-α-Pinene: Attractant Kairomones for Bark and Ambrosia Beetles in the Southeastern US

In 2002–2004, we examined the flight responses of 49 species of native and exotic bark and ambrosia beetles (Coleoptera: Scolytidae and Platypodidae) to traps baited with ethanol and/or (−)-α-pinene in the southeastern US. Eight field trials were conducted in mature pine stands in Alabama, Florida, Georgia, North Carolina, and South Carolina. Funnel traps baited with ethanol lures (release rate, about 0.6 g/day at 25–28°C) were attractive to ten species of ambrosia beetles (Ambrosiodmus tachygraphus, Anisandrus sayi, Dryoxylon onoharaensum, Monarthrum mali, Xyleborinus saxesenii, Xyleborus affinis, Xyleborus ferrugineus, Xylosandrus compactus, Xylosandrus crassiusculus, and Xylosandrus germanus) and two species of bark beetles (Cryptocarenus heveae and Hypothenemus sp.). Traps baited with (−)-α-pinene lures (release rate, 2–6 g/day at 25–28°C) were attractive to five bark beetle species (Dendroctonus terebrans, Hylastes porculus, Hylastes salebrosus, Hylastes tenuis, and Ips grandicollis) and one platypodid ambrosia beetle species (Myoplatypus flavicornis). Ethanol enhanced responses of some species (Xyleborus pubescens, H. porculus, H. salebrosus, H. tenuis, and Pityophthorus cariniceps) to traps baited with (−)-α-pinene in some locations. (−)-α-Pinene interrupted the response of some ambrosia beetle species to traps baited with ethanol, but only the response of D. onoharaensum was interrupted consistently at most locations. Of 23 species of ambrosia beetles captured in our field trials, nine were exotic and accounted for 70–97% of total catches of ambrosia beetles. Our results provide support for the continued use of separate traps baited with ethanol alone and ethanol with (−)-α-pinene to detect and monitor common bark and ambrosia beetles from the southeastern region of the US.     

Methyl 2,4,6-decatrienoates Attract Stink Bugs and Tachinid Parasitoids

Halyomorpha halys (Stål) (Pentatomidae), called the brown marmorated stink bug (BMSB), is a newly invasive species in the eastern USA that is rapidly spreading from the original point of establishment in Allentown, PA. In its native range, the BMSB is reportedly attracted to methyl (E,E,Z)-2,4,6-decatrienoate, the male-produced pheromone of another pentatomid common in eastern Asia, Plautia stali Scott. In North America, Thyanta spp. are the only pentatomids known to produce methyl 2,4,6-decatrienoate [the (E,Z,Z)-isomer] as part of their pheromones. Methyl 2,4,6-decatrienoates were field-tested in Maryland to monitor the spread of the BMSB and to explore the possibility that Thyanta spp. are an alternate host for parasitic tachinid flies that use stink bug pheromones as host-finding kairomones. Here we report the first captures of adult and nymph BMSBs in traps baited with methyl (E,E,Z)-2,4,6-decatrienoate in central Maryland and present data verifying that the tachinid, Euclytia flava (Townsend), exploits methyl (E,Z,Z)-2,4,6-decatrienoate as a kairomone. We also report the unexpected finding that various isomers of methyl 2,4,6-decatrienoate attract Acrosternum hilare (Say), although this bug apparently does not produce methyl decatrienoates. Other stink bugs and tachinids native to North America were also attracted to methyl 2,4,6-decatrienoates. These data indicate there are Heteroptera in North America in addition to Thyanta spp. that probably use methyl 2,4,6-decatrienoates as pheromones. The evidence that some pentatomids exploit the pheromones of other true bugs as kairomones to find food or to congregate as a passive defense against tachinid parasitism is discussed.     

2007～2008年世界塑料工业进展

收集了2007年7月～2008年6月世界塑料工业的相关资料,介绍了2007～2008年国外塑料工业的发展情况,提供了世界塑料产量、消费量及全球各类树脂的需求量及产能情况.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、特种工程塑料(聚苯·硫醚、液晶聚合物、聚醚醚酮)、通用热固性树脂(酚醛、聚氨酯、不饱和聚酯树脂、环氧树脂)不同品种的顺序,对树脂的产量、消费量、供需状况及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等技术作了详细介绍.     

2005～2006年国外塑料工业进展

收集了2005年7月～2006年6月国外塑料工业的相关资料,介绍了2005—2006年国外塑料工业的发展情况。提供了世界塑料产量、消费量及全球各类树脂生产量以及各国塑料制品的进出口情况。作为对比,介绍了中国塑料的生产情况。按通用热塑性树脂（聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂）、工程塑料（聚酰胺、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚）、通用热固性树脂（酚醛、聚氨酯、不饱和树脂、环氧树脂）、特种工程塑料（聚苯硫醚、液晶聚合物、聚醚醚酮）的品种顺序,对树脂的产量、消费量、供需状况及合成工艺、产品开发、树脂品种的延伸及应用的扩展作了详细的介绍。