Copper(I)‐Catalyzed [3+2] Cycloaddition/Ring‐Opening Rearrangement/[4+2] Cycloaddition/Aromatization Cascade: An Unprecedented Chemo‐ and Stereoselective Three Component Coupling of Sulfonyl Azide,Alkyne and N‐Arylidenepyridin‐2‐ amine to Pyrido[1,2‐a]pyrimidin‐4‐imine

A novel synthetic protocol for the one‐pot chemo‐ and stereoselective construction of diversely functionalized pyrido[1,2‐a]pyrimidin‐4‐imines via copper(I)‐catalyzed [3+2] cycloaddition/ring‐opening rearrangement/[4+2] cycloaddition/aromatization cascade of sulfonyl azides, alkynes and N‐arylidenepyridin‐2‐amines under mild reaction conditions is reported. In addition, the catalytic activity of copper(I)‐modified zeolite, a recyclable, heterogeneous catalyst is also investigated, which gives improved yield compared to its homogeneous equivalents.     

Iron(III)‐Catalyzed Cascade Reaction between Nitroolefins and 2‐Aminopyridines: Synthesis of Imidazo[1,2‐a]pyridines and Easy Access towards Zolimidine

The iron(III)‐catalyzed one‐pot cascade reaction between nitroolefins and 2‐aminopyridines has been demonstrated for the synthesis of imidazo[1,2‐a]pyridines by exploiting the bielectrophilic nature of nitroolefins. This methodology could be successfully applicable for the synthesis of zolimidine, a useful drug for the treatment of peptic ulcer. The reaction proceeds through Michael addition followed by intramolecular cyclization and in situ denitration.     

Nitrones as Trapping Reagents of α,β‐Unsaturated Carbene Intermediates – [1,2]Oxazino[5,4‐b]indoles by a Platinum‐ Catalyzed Intermolecular [3+3] Cycloaddition

Some readily available Boc‐protected 2‐(3‐methoxy‐1‐propynyl)anilines and nitrones in platinum‐catalyzed reactions deliver [1,2]oxazino[5,4‐b]indoles. Twelve examples with yields of 41–95% are reported. Different substituents like nitro, trifluoromethyl, fluoro, bromo, and ester groups are tolerated. With regard to the mechanism, this reaction probably combines an initial intramolecular cyclization/elimination to vinylcarbenoid species and a subsequent stepwise intermolecular [3+3] cycloaddition with the nitrones.     

Synthesis of Functionalized Polytriazoles via One-Pot Sequential Copper-Catalyzed Azide–Alkyne [3+2] Cycloaddition and Atom Transfer Radical Addition (ATRA)

As a continuing effort of expanding the scope of catalyst regeneration in the presence of environmentally benign reducing agents, one-pot sequential azide–alkyne [3+2] cycloaddition and atom transfer radical addition (ATRA) reactions were performed via in situ reduction of copper(II) by ascorbic acid. The formation of functionalized triazoles was achieved utilizing a ligand-free catalytic system for the cycloaddition between tripropargylamine and vinylbenzyl azide and subsequent addition of tris(2-pyridyl)methylamine (TPMA) ligand in the ATRA step. With this strategy, reactions with carbon tetrachloride and carbon tetrabromide proceeded efficiently providing the desired triazoles in nearly quantitative yields (>90 %) using 10 mol % of copper. Sequential azide–alkyne [3+2] cycloaddition and ATRA reactions were also extended to less active alkyl halides such as methyl trichloroacetate, methyl dichloroacetate and dichloroacetonitrile. The corresponding products were obtained in modest yields (50–80 %). The presented methodology enables efficient synthesis of functionalized polytriazoles, which could have a potential use as chelating agents for a variety of transition metals.     

N-((吡咯-2-)甲基)-3-羟基萘-2-甲酰胺催化的吲哚与硝基烯烃的Friedel-Crafts烷基化反应

探讨了廉价易得、环境友好的N-((吡咯-2-)甲基)-3-羟基萘-2-甲酰胺催化的吲哚与硝基烯烃不对称Friedel-Crafts烷基化反应.研究表明,在35℃条件下,CH2Cl2为溶剂、催化剂用量为10 mmol％、反应11h,吲哚及1-位或2-位被取代的吲哚与硝基烯烃能有效地进行Friedel-Crafts烷基化反应,可获得较好的产率.该反应具有催化剂经济易得且用量少、反应条件温和、环境友好、操作简单等优点.     

环状烯胺与吲哚的不对称傅克反应研究

以手性磷酸作为催化剂,研究了3-亚甲基异吲哚-1-酮与吲哚的不对称傅克烷基化反应。通过对催化剂、溶剂及反应温度等条件的优化,发现在室温条件下,以（S）-1-萘基取代的手性磷酸CPA-5为催化剂,在二氯甲烷溶剂中,反应可以获得51％N对映选择性。在此条件下,考察了吲哚的取代基效应,获得优秀的反应收率和39％~64％的ee值。     

[bmim]Cl／FeCl3离子液体催化苯与乙烯烷基化反应的新型机理

Up to now the mechanism of Friedel-Crafts reactions catalyzed by ionic liquid have not been fully understood, while carbocation mechanism was assumed. It was found that the source of H and the route of reaction initiated the alkylation of benzene with ethylene catalyzed by [bmim]Cl/FeCl3 ionic liquid. The fact that dewatered ionic liquids have catalytic activity for the alkylation of benzene with ethylene suggests that there exists a new catalytic route. The distinctly Bronsted acid properties of 2-H in [bmim]Cl were found through FT-IR and HNMR analysis of [bmim]Cl after titration with water free KOH in alcohol solution. In addition, the chemical shifts of proton on the [bmim]Cl ring, especially 2-H, are sensitive to the change of FeCl3 content and shifted downfield when FeCl3 was added into [bmim]Cl to form ionic liquid. Thus 2-H was easy to be disengaged from imidazolium ring with formation of H^ to initiate the reaction. The isotope-substituted method was employed to prove this mechanism, through the GC-MS analysis of alkylation products of deuterated benzene with ethylene. The route of alkylation catalyzed by FeC13 ionic liquid was found to follow the carbocation mechanism, the resource of H was presented and proved using HNMR analysis of ionic liquid to inspect the intensity change of 2-H. It was found that the intensity of 2-H reduced 23% after reaction showing that the H arising from alkylation reaction was supplied by 2-H on the imidazole ring.     

New Alkylation Route of Benzene with Ethylene Catalyzed by [bmim]Cl/FeCl_3 Ionic Liquid

Up to now the mechanism of Friedel-Crafts reactions catalyzed by ionic liquid have not been fully understood, while carbocation mechanism was assumed. It was found that the source of H and the route of reaction initiated the alkylation of benzene with ethylene catalyzed by [bmim]Cl/FeCl3 ionic liquid. The fact that dewatered ionic liquids have catalytic activity for the alkylation of benzene with ethylene suggests that there exists a new catalytic route. The distinctly Bronsted acid properties of 2-H in [bmim]Cl were found through FT-IR and HNMR     

Lipase/Acetamide‐Catalyzed Carbon‐Carbon Bond Formations: A Mechanistic View

A lipase B from Candida antarctica (CALB)/acetamide‐catalyzed Michael addition of less‐activated ketones and aromatic nitroolefins has been developed, which is particularly interesting because neither CALB nor acetamide can independently catalyze the reaction to any appreciable extent. This co‐catalyst system was applicable to the Michael additions of cyclic and acyclic ketones to a series of aromatic and heteroaromatic nitroolefins. Hydrogen bonds between acetamide and cyclohexanone were confirmed for the observed activation by experimental facts, and new mechanistic insights into CALB/acetamide co‐catalysis are presented.     

Continuous gas-phase isopropylation of toluene and cumene using highly acidic Supported Ionic Liquid Phase (SILP) catalysts

Continuous gas-phase Friedel-Crafts isopropylation of toluene and cumene has been investigated using acidic Supported Ionic Liquid Phase (SILP) materials as the catalyst. Detailed kinetic studies in a multi-stage tubular reactor revealed that reactant's water content and the aromatic-to-alkene ratio are the most relevant influencing factors for the catalyst stability and selectivity in these reactions. Based on this insight, our process optimization led to the first highly stable, highly active and selective SILP-type acidic catalyst system for gas-phase aromatic alkylation. We anticipate that this concept offers great potential for more sustainable Friedel-Crafts alkylation processes.     

Copper‐in‐Charcoal‐Catalyzed,Tandem One‐Pot Diazo Transfer‐Click Reactions

Copper‐in‐charcoal (Cu/C) is an effective heterogeneous catalyst for tandem diazo transfer/click reactions. In the presence of Cu/C, various azides can be generated in situ from the corresponding amines, and subsequently undergo [3+2] cycloaddition with terminal alkynes to afford triazoles in good yields. The catalyst is also easily recycled.     

Direct functionalization of nitrogen heterocycles via Rh-catalyzed C-H bond activation

[Reaction: see text]. Nitrogen heterocycles are present in many compounds of enormous practical importance, ranging from pharmaceutical agents and biological probes to electroactive materials. Direct functionalization of nitrogen heterocycles through C-H bond activation constitutes a powerful means of regioselectively introducing a variety of substituents with diverse functional groups onto the heterocycle scaffold. Working together, our two groups have developed a family of Rh-catalyzed heterocycle alkylation and arylation reactions that are notable for their high level of functional-group compatibility. This Account describes our work in this area, emphasizing the relevant mechanistic insights that enabled synthetic advances and distinguished the resulting transformations from other methods. We initially discovered an intramolecular Rh-catalyzed C-2 alkylation of azoles by alkenyl groups. That reaction provided access to a number of di-, tri-, and tetracyclic azole derivatives. We then developed conditions that exploited microwave heating to expedite these reactions. While investigating the mechanism of this transformation, we discovered that a novel substrate-derived Rh- N-heterocyclic carbene (NHC) complex was involved as an intermediate. We then synthesized analogous Rh-NHC complexes directly by treating precursors to the intermediate [RhCl(PCy 3)2] with N-methylbenzimidazole, 3-methyl-3,4-dihydroquinazoline, and 1-methyl-1,4-benzodiazepine-2-one. Extensive kinetic analysis and DFT calculations supported a mechanism for carbene formation in which the catalytically active RhCl(PCy 3) 2 fragment coordinates to the heterocycle before intramolecular activation of the C-H bond occurs. The resulting Rh-H intermediate ultimately tautomerizes to the observed carbene complex. With this mechanistic information and the discovery that acid cocatalysts accelerate the alkylation, we developed conditions that efficiently and intermolecularly alkylate a variety of heterocycles, including azoles, azolines, dihydroquinazolines, pyridines, and quinolines, with a wide range of functionalized olefins. We demonstrated the utility of this methodology in the synthesis of natural products, drug candidates, and other biologically active molecules. In addition, we developed conditions to directly arylate these heterocycles with aryl halides. Our initial conditions that used PCy 3 as a ligand were successful only for aryl iodides. However, efforts designed to avoid catalyst decomposition led to the development of ligands based on 9-phosphabicyclo[4.2.1]nonane (phoban) that also facilitated the coupling of aryl bromides. We then replicated the unique coordination environment, stability, and catalytic activity of this complex using the much simpler tetrahydrophosphepine ligands and developed conditions that coupled aryl bromides bearing diverse functional groups without the use of a glovebox or purified reagents. With further mechanistic inquiry, we anticipate that researchers will better understand the details of the aforementioned Rh-catalyzed C-H bond functionalization reactions, resulting in the design of more efficient and robust catalysts, expanded substrate scope, and new transformations.     

Thiol Michael addition reaction: a facile tool for introducing peptides into polymer‐based gene delivery systems

Polymers, as widely used non‐viral gene carriers, suffer from high cytotoxicity and relatively low transfection efficiency. Such crucial drawbacks of polymers could be solved by incorporating short and bioactive peptides. The resulting synthetic polymer–peptide conjugates can not only maintain their own special characteristics, but also gain novel characteristics far beyond those of their parent polymer and peptide components to overcome barriers to gene delivery. There are various chemoselective reactions applied in the synthesis of polymer–peptide conjugates, such as Heck, Sonogashira and Suzuki coupling, Diels–Alder cycloaddition, click chemistry, Staudinger ligation, reductive alkylation and oxime/hydrazone chemistry. Among them, thiol–ene click reactions, including thiol–ene radical and thiol Michael addition reactions, are common methods for preparing peptide–polymer conjugates. In this review, we focus on thiol Michael addition reactions, elaborate on their mechanisms and highlight their applications in the synthesis of polymer–peptide conjugates for gene delivery. © 2017 Society of Chemical Industry     

Studies on Palladium‐Catalyzed Synthesis of Dihydrocycloocta‐ [b]indoles and their Thermal Reactivities with Maleimide or Maleic Anhydride

A palladium(0)‐catalyzed reaction of 2‐allyl‐3‐indolyl boronates/propargylic carbonates was observed to afford dihydrocycloocta[b]indoles highly efficiently via carbon‐carbon coupling, [1,5]‐hydrogen migration involving dearomatization, and electrocyclization involving rearomatization. Their thermal reactions with the addition of dienophiles involving eletrocyclization and [4+2] cycloaddition have been studied.

     

Organocatalytic Enantioselective Michael‐Addition of Malonic Acid Half‐Thioesters to β‐Nitroolefins: From Mimicry of Polyketide Synthases to Scalable Synthesis of γ‐Amino Acids

Highly enantioselective biomimetic Michael addition reactions of malonic acid half thioesters (MAHTs) to a variety of nitroolefins, affording the optically active γ‐amino acid precursors, were developed by employing the Cinchona‐based squaramides (up to >99% ee). Remarkably, this biomimetic process is enantioconvergent, a highly desirable feature of a catalytic asymmetric reaction, whereby E/Z‐isomers of the nitroolefins afford the same product enantiomer. The synthetic utility of this organocatalytic protocol was also demonstrated in the formal synthesis of pharmaceutically important γ‐amino acids such as baclofen. Moreover, a quantum chemical analysis of the catalyst‐substrate complexes is shown to give a detailed and instrumental insight into the origin of the observed catalytic activity.     

双官能团硫脲-胺催化剂催化不对称有机反应的研究进展

双官能团硫脲-胺催化剂因在不对称催化反应中表现出的高效、高对映选择性而受到广泛关注,已成功应用于催化各种不对称有机反应中,本文简述了双官能团硫脲-胺催化剂在Michael加成、1,2加成以及Michael-type串联反应中应用的研究进展。     

Chiral Dirhodium(II) Carboxamidate‐Catalyzed [2+2]‐Cycloaddition of TMS‐Ketene and Ethyl Glyoxylate

The [2+2]‐cycloaddition reaction between ethyl glyoxylate and trimethylsilylketene is reported. Enantiomeric excesses up to 83% have been achieved with the use of only 1.0 mol % of a previously unreported chiral imidazolidinone‐ligated dirhodium(II) carboxamidate catalyst. An extensive survey of chiral catalysts has shown that enantiocontrol for cycloaddition increases as the steric bulk of the ligand is increased. However, enantioselectivity is increased to 99% ee by the addition of 10 mol % of quinine as a co‐catalyst with a chiral dirhodium(II) azetidinone‐ligated catalyst, and there is a significant decrease in reaction time.     

Intramolecular Azide‐Alkene 1,3‐Dipolar Cycloaddition/Enamine Addition(s) Cascade Reaction: Synthesis of Nitrogen‐Containing Heterocycles

A cascade intramolecular azide‐alkene 1,3‐dipolar cycloaddition/1,2 enamine and/or 1,4 enamine addition reaction sequence has been developed, and provides access to a variety of nitrogen containing heterocycles from readily available ω‐azido alkenes.     

Gallium(III) triflate: an efficient and a sustainable Lewis acid catalyst for organic synthetic transformations

Green chemical processes play a crucial role in sustainable development, and efficient recyclable catalysts that can be conveniently applied in various chemical reactions are the key elements for the development of sustainable synthetic processes. Many organic transformations rely on Lewis and Br?nsted acid catalysts, and such molecules have been widely studied in organic synthesis. Over the years, researchers have looked for Lewis acid catalysts that provide high selectivity and high turnover frequency but are also stable in aqueous media and recoverable. Since the first preparation of trifluoromethanesulfonic acid by Hazeldine (triflic acid, HOTf), researchers have synthesized and used numerous metal triflates in a variety of organic reactions. Even though the rare earth metal triflates have played a major role in these studies, the majority of rare earth triflates lack one or more of the primary properties of sustainable catalysts: low cost and easy availability of the metals, easy preparation of triflates, aqueous/thermal stability, recyclability, and catalytic efficiency. In this Account, we describe the synthetic applications of Ga(OTf)(3) and its advantages over similar catalysts. Ga(OTf)(3) can be conveniently prepared from gallium metal or gallium chloride in excess of trifluoromethanesulfonic acid (triflic acid) under reflux. Among many Lewis acid catalysts recently studied, Ga(OTf)(3) is water tolerant and soluble and requires very low catalyst loading to drive various acid-catalyzed reactions including Friedel-Crafts alkylation, hydroxyalkylation, and acylation selectively and efficiently. In many reactions Ga(OTf)(3) demonstrated high chemo- and regioselectivity, high yields, excellent stability, and recyclability. We successfully synthesized many biologically active heterocycles and their fluoroanalogs under mild conditions. Many challenging reactions such as the ketonic Strecker reactions proceed efficiently via Ga(OTf)(3) catalysis. Because it is stable in water, this catalyst provides the opportunity to study substrates and develop new synthetic protocols in aqueous media, significantly reducing the production of hazardous waste from organic solvents and toxic catalyst systems.     

The Application of a Recyclable Organocatalytic System to the Asymmetric Domino Michael/Henry Reaction in Aqueous Media

A new type of pyrrolidine‐based organocatalyst has been developed and found to be very effective for the domino Michael/Henry reaction in aqueous solvents. For the reaction involving pentane‐1,5‐dial and various nitroolefins, good yields (65–85%) and excellent enantioselectivities (99%) were obtained using this catalyst. In addition, the catalyst could be recycled up to four times resulting in good yields and up to seven times with good enantioselectivity.