共查询到19条相似文献,搜索用时 109 毫秒
1.
2.
3.
4.
本文介绍了溴化锂水溶液的热物性计算公式,以及利用这些公式进行溴化锂吸收式制冷机计算机编程设计的步骤,为采用不同热源的溴化锂吸收式制冷机优化设计打下了基础。 相似文献
5.
根据国内外有关资料及现行国内溴化锂水溶液热物性数据、图表,对废热溴化锂吸收式制冷机进行了计算机辅助设计研究,编制了溴化锂水溶液热物性计算程序,以及废热溴化锂吸收式制冷机的设计计算程序 相似文献
6.
溴化锂吸收式制冷机新型镍合金强化传热管的实验研究 总被引:3,自引:0,他引:3
对一种新型镍合金强化传热管在210-250℃高温溴化锂水溶液中的耐腐蚀性、传热、传质、抗拉强度、耐磨性、胀管气密性等进行了实验研究。结果表明,在高温溴化锂水溶液中,该管具有很强的耐腐蚀性,其传热、传质及工艺性优良,可以用作三效溴化锂吸收式制冷机传热管。 相似文献
7.
根据现有汽车空调的制冷系统和发动机循环冷却水系统结构特点,并结合单效溴化锂吸收式制冷机的性能,提出溴化锂吸收式制冷系统中的发生器由改造后的汽车发动机缸盖部分和冷却水系统部分共同组成,将溴化锂溶液充注在汽车发动机的冷却空腔内,代替原来的冷却液,进而实现制冷效果。本文实现了用一个单效溴化锂吸收式制冷机系统代替现有汽车空调的制冷系统和发动机冷却水系统,并进行了理论分析和设计计算。 相似文献
8.
9.
10.
双级喷射热泵与吸收式制冷的复合循环 总被引:3,自引:0,他引:3
在计算分析单级喷射式热泵与单效溴化锂吸收式制冷复合循环的基础上提出了一种双级喷射式热泵与单效吸收式制冷的复合循环。本文对这种双级新型制冷循环进行了定性和定量分析,并对双级喷射器进行优化分析。 相似文献
11.
12.
冷却水对废热驱动型双效溴化锂吸收式制冷机组性能影响的仿真研究 总被引:1,自引:0,他引:1
随着能源使用的日益紧张,各类冷热电联供技术尤其是废热驱动型吸收式制冷机组的性能研究越来越受到关注。针对废热驱动型双效溴化锂吸收式制冷机组性能特点,建立了该机组在小扰动条件下的数学模型,并编制了相应的仿真程序。根据仿真结果分析了冷却水进口温度和流量的变化对废热驱动型吸收式机组的性能影响。 相似文献
13.
14.
针对溴化锂制冷机年久失修并影响使用的的现状,通过对溴化锂制冷机的原理和结构的分析,结合机器现状,在对其进行维修和改进的同时,记录下修理过程,并对维修成本进行核算,使该维修达到了减少成本、节约能源的目的,进一步的保证了安全生产、提高了效益。 相似文献
15.
Jung-In Yoon Oh-Kyung Kwon Choon-Geun Moon Takao Kashiwagi 《Journal of Mechanical Science and Technology》1999,13(3):264-272
This study investigates the effect of additives such as normal octyl alcohol into lithium bromide-water (LiBr/H2O) solutions in the absorption and generation processes of absorption refrigerating machines. The experimental results confirmed
the positive effect of additive use in the absorber. Little is known, however, on the effect of additives on generator performance.
In this study, the authors carried out experiments to investigate the possible positive or negative effects of additive, which
enhances the absorption process, on the generator behavior. The results showed heat transfer at the generator improved as
pressure increased and concentration decreased; the boiling heat transfer coefficient was shown to be more strongly influenced
by concentration than by pressure. The boiling curves showed that the heat transfer of solution in the generator was not significantly
affected by the addition of surfactant. The result of this study showed that the surfactant in absorption heater/chiller made
enhanced absorption effect in the absorber but it didn't give any influence in the generator. Therefore the additive was devoted
to helping high performance in the absorption system. 相似文献
16.
17.
18.