Carbon nanowalls amplify the surface-enhanced Raman scattering from Ag nanoparticles

We report surface-enhanced Raman scattering (SERS) from Ag nanoparticles decorated on thin carbon nanowalls (CNWs) grown by microwave plasma chemical vapor deposition. The Ag morphology is controlled by exposing the CNWs to oxygen plasma and through the electrodeposition process by varying the number of deposition cycles. The SERS substrates are capable of detecting low concentrations of rhodamine 6G and bovine serum albumin, showing much higher Raman enhancement than ordinary planar HOPG with Ag decoration. The major factors contributing to this behavior include: high density of Ag nanoparticles, large surface area, high surface roughness, and the underlying presence of vertically oriented CNWs. The relatively simple procedure of substrate preparation and nanoparticle decoration suggests that this is a promising approach for fabricating ultrasensitive SERS substrates for biological and chemical detection at the single-molecule level, while also enabling the study of fundamental SERS phenomena.     

Silver nanoparticles deposited on anodic aluminum oxide template using magnetron sputtering for surface-enhanced Raman scattering substrate

Low-cost and highly sensitive surface-enhanced Raman scattering (SERS) substrates have been fabricated by a simple anodizing process and a magnetron sputtering deposition. The substrates, which consist of silver nanoparticles embedded on anodic aluminum oxide (AAO) templates, are investigated by a scanning electron microscope and a confocal Raman spectroscopy. The SERS activities are demonstrated by Raman scattering from adsorbed solutions of methylene blue and pyridine on the SERS substrate surface. The most optimized SERS substrate contains the silver nanoparticles, with a size distribution of 10-30 nm, deposited on the AAO template. From a calculation, the SERS enhancement factor is as high as 8.5 × 10⁷, which suggests strong potentials for direct applications in the chemical detection and analyses.     

Linker-molecule-free gold nanorod layer-by-layer films for surface-enhanced Raman scattering

This paper reports a methodology for synthesizing and ordering gold nanorods into two-dimensional arrays at a water/hexane interface. This preparation method allows the systematic control of the nanoparticle film thickness. An investigation into the thickness-dependent surface-enhanced Raman scattering (SERS) of the adsorbed molecules revealed the nanorod (NR) films to have 1 order of magnitude stronger SERS enhancement than the nanosphere (NS) under similar experimental conditions. The exposed surface areas of the prepared NR and NS films were analyzed using electrochemical methods, and it was found that they had comparable exposed surface areas. Therefore, the order of magnitude difference in the enhancement factor was not due to the differences in surface area but to their intrinsic difference in the optical coupling of each film. The difference was attributed to the high density of junction points with the NR films in comparison with the corresponding NS films. Scanning emission microscopy showed that the NR films have line contacts with each other but the NS films have point contacts, which can explain the difference in SERS intensity between the NR and NS films.     

Near-Field Surface-Enhanced Raman Imaging of Dye-Labeled DNA with 100-nm Resolution

Raman chemical imaging on a scale of 100 nm is demonstrated for the first time. This is made possible by the combination of scanning near-field optical microscopy (SNOM or NSOM) and surface-enhanced Raman scattering (SERS), using brilliant cresyl blue (BCB)-labeled DNA as a sample. SERS substrates were produced by evaporating silver layers on Teflon nanospheres. The near-field SERS spectra were measured with an exposure time of 60 s and yielded good signal-to-noise ratios (25:1). The distinction between reflected light from the excitation laser and Raman scattered light allows the local sample reflectivity to be separated from the signal of the adsorbed DNA molecules. This is of general importance to correct for topographic coupling that often occurs in near-field optical imaging. The presented data show a lateral dependence of the Raman signals that points to special surface sites with particularly high SERS enhancement.     

High-density silver nanoparticle film with temperature-controllable interparticle spacing for a tunable surface enhanced Raman scattering substrate

The formation of high-density silver nanoparticles and a novel method to precisely control the spacing between nanoparticles by temperature are demonstrated for a tunable surface enhanced Raman scattering substrates. The high-density nanoparticle thin film is accomplished by self-assembling through the Langmuir-Blodgett (LB) technique on a water surface and transferring the particle monolayer to a temperature-responsive polymer membrane. The temperature-responsive polymer membrane allows producing a dynamic surface enhanced Raman scattering substrate. The plasmon peak of the silver nanoparticle film red shifts up to 110 nm with increasing temperature. The high-density particle film serves as an excellent substrate for surface-enhanced Raman spectroscopy (SERS), and the scattering signal enhancement factor can be dynamically tuned by the thermally activated SERS substrate. The SERS spectra of Rhodamine 6G on a high-density silver particle film at various temperatures is characterized to demonstrate the tunable plasmon coupling between high-density nanoparticles.     

Silver-island films as substrates for enhanced Raman scattering: effect of deposition rate on intensity.

The relationship between surface-enhanced resonance Raman scattering (SERRS) intensity and the rate of deposition during silver-island film preparation was examined, using zinc tetraphenylporphine (ZnTPP) as the adsorbate. The effect of the deposition rate on the optical properties of the films at specific wavelengths was also analyzed. The data show that the film extinction (the term extinction is used rather than absorption because the spectra have not been corrected for reflection or scattering losses) increases exponentially at 514 and 458 nm as the deposition rate is decreased. SERRS intensities also increase exponentially at these two excitation wavelengths with a decrease in the deposition rate. The optical density is linearly related to the SERRS intensity, and maximal enhancement is observed for films with the greatest extinction at these excitation wavelengths. In contrast, neither the extinction at 406 nm nor the SERRS scattering intensities resulting from excitation at this wavelength differ substantially. The surface-enhanced Raman scattering (SERS) intensity and the electronic spectra of 4,4'-bipyridine (BP) adsorbed onto silver films as a function deposition rate were also examined. The behavior of the nonresonantly enhanced BP is comparable to that of the resonantly enhanced ZnTPP samples. The effects of the surface morphology, as determined from transmission electron micrographs of the films at various deposition rates, on the corresponding electronic spectra and SERS/SERRS spectra are described.     

Broadband coherent anti-Stokes Raman spectroscopy characterization of polymer thin films

Broadband coherent anti-Stokes Raman spectroscopy (CARS) is demonstrated as an effective probe of polymer thin film materials. A simple modification to a 1 kHz broad bandwidth sum frequency generation (SFG) spectrometer permits acquisition of CARS spectra for polymer thin films less than 100 nm thick, a dimension relevant to organic electronic device applications. CARS spectra are compared to the conventional Raman spectra of polystyrene and the resonance-enhanced Raman spectra of poly(3-hexylthiophene). The CARS spectra obtained under these conditions consistently demonstrate enhanced signal-to-noise ratio compared to the spontaneous Raman scattering. The sensitivity of the CARS measurement is limited by the damage threshold of the samples. The dielectic properties of the substrate have a dramatic effect on the detected signal intensity. For ultrathin films, the strongest signals are obtained from fused silica surfaces. Similar to surface-enhanced Raman scattering (SERS), Au also gives a large signal, but contrary to SERS, no surface roughening is necessary.     

Structural characterization of CdS thin film on quartz formed by femtosecond pulsed laser deposition at high temperature

CdS thin films have been grown on quartz substrates using femtosecond pulsed laser deposition. The structural and optical properties of the CdS thin films were characterized by X-ray diffraction, scanning electron microscopy, atomic force microscopy, X-ray photoelectron spectroscopy and Raman spectroscopy. The results indicate that the compositional segregation of the CdS films could be drawn from the selective evaporation of sulfur from the film surface as a result of heating up the substrates. Growth temperature played an important role on changing crystal structure and optical properties of the CdS films.     

Nanofabrication of densely packed metal-polymer arrays for surface-enhanced Raman spectrometry

A key element to improve the analytical capabilities of surface-enhanced Raman spectroscopy (SERS) resides in the performance characteristics of the SERS-active substrate. Variables such as shape, size, and homogeneous distribution of the metal nanoparticles throughout the substrate surface are important in the design of more analytically sensitive and reliable substrates. Electron-beam lithography (EBL) has emerged as a powerful tool for the systematic fabrication of substrates with periodic nanoscale features. EBL also allows the rational design of nanoscale features that are optimized to the frequency of the Raman laser source. In this work, the efficiency of EBL fabricated substrates are studied by measuring the relative SERS signals of Rhodamine 6G and 1,10-phenanthro-line adsorbed on a series of cubic, elliptical, and hexagonal nanopatterned pillars of ma-N 2403 directly coated by physical vapor deposition with 25 nm films of Ag or Au. The raw analyte SERS signals, and signals normalized to metal nanoparticle surface area or numbers of loci, are used to study the effects of nanoparticle morphology on the performance of a rapidly created, diverse collection of substrates. For the excitation wavelength used, the nanoparticle size, geometry, and orientation of the particle primary axis relative to the excitation polarization vector, and particularly the density of nanoparticles, are shown to strongly influence substrate performance. A correlation between the inverse of the magnitude of the laser backscatter passed by the spectrometer and SERS activities of the various substrate patterns is also noted and provides a simple means to evaluate possible efficient coupling of the excitation radiation to localized surface plasmons for Raman enhancement.     

基片预处理对MWPCVD金刚石薄膜的影响

利用自行研制的石英钟罩式微波等离子体化学气相沉积金刚石薄膜装置，研究了硅基片的不同预处理方式对沉积结果的影响。通过扫描电子显微镜形貌观察和喇曼谱分析表明，基片预处理能提高形核密度；用于预处理的金刚石研磨膏的粒度不同，影响金刚石薄膜沉积时的形核密度、晶形和薄膜的质量；表面划痕对沉积金刚石薄膜的影响具有双重性。     

Nanoscale roughness on metal surfaces can increase tip-enhanced Raman scattering by an order of magnitude

We studied the influence of nanosteps on signal intensity in gap-mode tip-enhanced Raman spectroscopy (TERS). A benzenethiol monolayer adsorbed on an Au substrate was investigated. The correlation between the TERS signal and the local topography on the substrate shows that a 2 nm high sharp step on the Au surface can significantly increase the enhancement. Furthermore, theoretical models were built, and the numerical simulation results were consistent with our experimental results. The findings provide evidence that nanoscale roughness can play a crucial role in the "hot sites" corresponding to single-molecule surface-enhanced Raman spectroscopy (SERS).     

Novel method for preparing controllable and stable silver particle films for surface-enhanced Raman scattering spectroscopy

A new surface-enhanced Raman scattering (SERS) active substrate has been developed based on our previous study. Small silver nanoparticles on a quartz slide can be enlarged by using a mixture of commercially available reagents called Silver Enhancer and Initiator. The optical properties and characteristics of the new substrate have been investigated by ultraviolet-visible (UV-Vis) spectroscopy and atomic force microscopy (AFM). The results indicate that the small silver nanoparticles grow and some silver aggregates emerge on the quartz slide after the slide is immersed into the Silver Enhancer and Initiator Mixture (SEIM). The average diameter of the silver nanoparticles on the substrate becomes approximately double after the immersion into SEIM for 20 s. 1,4-bis[2-(4-pyridyl)ethenyl]-benzene (BPENB) was used as a Raman probe to evaluate the enhancement ability of the new silver substrate. It has been found that the SERS intensity can be increased about 10 times by using the substrate treated by SEIM compared with that without being treated by SEIM. Interestingly enough, the SERS enhancement increases with time. This may be due to the reorganization of silver nanoparticles on the quartz surface. The new substrate can remain active for more than 90 days. The adsorption mode of BPENB on the new substrate and the dependence of the BPENB configurations on the concentration of BPENB in methanol solution have also been investigated by SERS or UV-Vis spectroscopy. The SERS spectra of a self-assembled monolayer (SAM) BPENB film adsorbed on a silver substrate treated by SEIM show that BPENB molecules are chemically absorbed through the Ag-N bond. Consequently, a nearly perpendicular orientation of BPENB on the silver surface is proposed. The SERS spectra of BPENB SAMs on the new substrates fabricated from methanol solutions with different concentrations are compared. The concentration dependence of the SERS spectra reveals that the BPENB molecules are adsorbed on the silver film as monomers when the film is prepared from the solution with a lower concentration (<4 x 10(-6) M) and as aggregates when it is prepared from the solution with a higher concentration (>1 x 10(-5) M).     

A Raman spectroscopic study of structural evolution of electrochemically deposited ZnO films with deposition time

Zinc oxide thin films were fabricated on ITO substrates by electrodeposition method. The electrolyte used was a 0.2 M zinc nitrate aqueous solution. The substrates were maintained at room temperature and the deposition performed for different times between 10 and 30 min. X-ray diffraction measurements indicated the formation of polycrystalline ZnO film with hexagonal wurtzite structure. The structure and crystallinity of the films was also confirmed by Raman spectroscopy. Further, the degree of disorder was estimated both from the phonon correlation length calculated from the Raman spectra using the spatial correlation model and from the intensity ratios of the phonons. The variation with deposition time followed the same trend as the crystallite sizes obtained from X-ray diffraction. X-ray photoelectron spectroscopy measurements indicated oxygen deficiency in the films. A combination of annealing and optimum deposition time improves the quality of the electrodeposited ZnO films.     

Fabricating Au–Ag core-shell composite films for surface-enhanced Raman scattering

Surface-enhanced Raman scattering (SERS) integrates high levels of sensitivity with spectroscopic precision, and thus, has tremendous potential for chemical and biomolecular sensing. The key to the wider application of Raman spectroscopy using roughened metallic surfaces is the development of highly enhancing substrates for analytical purposes, i.e., for better detection sensitivity of trace contaminants and pollutants. Here, we have prepared Au, Ag, AuAg multilayer, and Au@Ag films on glass substrates for SERS-active substrates. The Au@Ag film shows a much stronger SERS signal for trans-bis(4-pyridyl)ethylene (BPE) molecules than those from pure Au, Ag, and AuAg films, indicating the Au@Ag film is more powerful than pure Au, Ag, and AuAg film as SERS active substrates. The enhanced surface Raman scattering signals were attributed to the local field enhancement in the core-shell structure.     

Heating of polymer substrate by discharge plasma in radiofrequency magnetron sputtering deposition

The substrate used for the thin film deposition in a radiofrequency magnetron sputtering deposition system is heated by the deposition plasma. This may change drastically the surface properties of the polymer substrates. Deposition of titanium dioxide thin films on polymethyl methacrylate and polycarbonate substrates resulted in buckling of the substrate surfaces. This effect was evaluated by analysis of atomic force microscopy topography images of the deposited films. The amount of energy received by the substrate surface during the film deposition was determined by a thermal probe. Then, the results of the thermal probe measurements were used to compute the surface temperature of the polymer substrate. The computation revealed that the substrate surface temperature depends on the substrate thickness, discharge power and substrate holder temperature. For the case of the TiO₂ film depositions in the radiofrequency magnetron plasma, the computation indicated substrate surface temperature values under the polymer melting temperature. Therefore, the buckling of polymer substrate surface in the deposition plasma may not be regarded as a temperature driven surface instability, but more as an effect of argon ion bombardment.     

Surface topography and hydrogen sensor response of APCVD grown multilayer graphene thin films

Atmospheric pressure chemical vapour deposition was employed to deposit graphene thin films on thermally oxidized p-silicon substrates. Raman spectroscopy and energy dispersive spectroscopy revealed the multilayer nature and the composition of the grown graphene films respectively. The defective nature and the defect density of the graphene films were determined from the Raman experiments. Field effect scanning electron microscopy, transmission electron microscopy and atomic force microscopy were used to study the surface morphology of the multilayer graphene films. The film topography was sensitive to temperature and time of growth. A suitable growth mechanism has been proposed to explain the topographical observations. The large surface area of the multilayer films was found to be suitable for hydrogen sensor applications and the sensing results were correlated with the morphology of the grown films.     

Preparation of silver nanoparticles by photo-reduction for surface-enhanced Raman scattering

A substrate for surface-enhanced Raman scattering (SERS) has been developed. Based on the surface-catalyzed reduction of Ag⁺ by citrate on the silver nanoparticles surface under light irradiation, small silver seeds on a quartz slide can be enlarged. The optical properties and characteristics of the silver films have been investigated by ultraviolet-visible spectroscopy, scan electron microscope and atomic force microscopy (AFM). The results indicate that the particle size and shape are different at different reduction time. At the first 3 h, some triangular and hexagonal nanoparticles formed; with the reduction proceeding, the shape of the silver particles became irregular and the size became larger. The silver films obtained are very suitable as SERS active substrate. The relationship between SERS intensity and the reduction time has been investigated for 1,4-bis[2-(4-pyridyl)ethenyl]-benzene molecule adsorbed on the silver film. The SERS intensity reached a maximum at 8 h reduction. The AFM measurements indicate that roughness features with an average size of 100 nm are present on the surface, which yielded the strongest SERS signal. Pyridine was used as a probe molecule to investigate the enhancement factor (EF) of the silver films. According to the formalism of Tian and co-workers, the EF of the silver films is estimated to be 3.4 × 10⁵. The silver film that can remain active for more than 50 days would seem to be suitable for various analytical applications.     

Characteristics of organic-inorganic hybrid plasma polymer thin films for low-κ ILD applications

This study investigated the effects of plasma power and tetraethylorthosilane (TEOS) to cyclohexene ratios on low-κ organic-inorganic hybrid plasma polymer thin films deposited on silicon (100) substrates. These films were deposited using a plasma enhanced chemical vapor deposition (PECVD) method, in addition to the electrical and mechanical properties of the resulting composites. Cyclohexene and TEOS were used as organic and inorganic precursors, respectively, with hydrogen and argon as precursor bubbler gases. Furthermore, additional argon was used as a carrier gas. The as-grown polymerized thin films were analyzed using ellipsometry, Fourier-transform infrared (FT-IR) spectroscopy, atomic force microscopy (AFM), transmission electron microscopy (TEM), and X-ray diffraction (XRD). The ellipsometry results showed the thickness of the hybrid thin film, and the FT-IR spectra showed that the hybrid polymer thin films were completely fragmented and polymerized between cyclohexene and TEOS. AFM results showed that polymer films with a smooth surface could be grown under various deposition conditions, while TEM and XRD showed that the hybrid thin film was an amorphous plasma polymer thin film without porosity. In addition, current-voltage (C-V) curves were prepared to calculate the dielectric constants. Post-annealing was applied to investigate the thermal stability of hybrid plasma polymer thin films in the hardness, Young's modulus, thermal shrinkage, and the dielectric constant at 400 °C.     

Preparation of gold nano-cones as surface-enhanced Raman scattering sensors for molecule detection

Surface-enhanced Raman spectroscopy (SERS) is a powerful novel analytical tool which integrates high levels of sensitivity for trace analysis of chemical and biomolecular species due to the massive enhancement of Raman signals by using nanometre-sized metal particles. However, SERS can be envisaged as an analytical tool only if substrates with strong, predictable and reproducible SERS enhancement can be produced. Here we have developed one simple Ar+ ions sputtering technology to prepare gold nano-cones array on silicon substrates as surface-enhanced Raman scattering (SERS)-active substrates. The tip of the gold cone-structures exhibited an extremely sharp curvature with an apex diameter of 20 nm and the interior apex angle of the nanocones was around 20 degrees. These samples were evaluated as potential SERS substrates using Rhodamine 6G molecules as molecule probe and exhibited SERS enhancement factor of greater than 10, originated from the localized electron field enhancement around the apex of cones and the surface plasmon coupling of periodic structures.     

Atomic layer deposition of platinum thin films on anodic aluminium oxide templates as surface-enhanced Raman scattering substrates

Platinum thin films are deposited on anodic aluminium oxide (AAO) templates by atomic layer deposition (ALD). The highly ordered island-like platinum nanostructures formed on the AAO template produce a high Raman scattering signal because of the periodical hexagonal arrangement. As an illustration, dramatic enhancement is achieved using Rhodamine 6G (R6G) as a molecular probe.Field-emission scanning electron microscopy (FE-SEM) and atomic force microscopy (AFM) show that the gap between the island-like structures is below 10 nm. Owing to activation by the incident laser beam, the localized electromagnetic field on the platinum island surface can be dramatically enhanced by the sub-10 nm regime subsequently amplifying the Raman signal. Finite-difference time-domain (FDTD) calculation matches the experimental phenomena suggesting that the excellent surface-enhanced Raman scattering (SERS) characteristics of the platinum structure arise from the high density and abundance of hot spots. Because the platinum film is inert in air, the SERS enhancing substrate can be used reliably in many trace chemical and biological detection applications.