Theoretical Studies on Molecular and Explosive Properties of 4,4′,5,5′‐Tetranitro‐2,2′‐bi‐1H‐imidazole (TNBI)

We performed theoretical studies to predict the molecular structure, molecular properties, and explosive performance of 4,4′,5,5′‐tetranitro‐2,2′‐bi‐1H‐imidazole (TNBI). High levels of ab initio and density functional theories were employed to predict the molecular structure of TNBI. Predicted TNBI structure was in good agreement with that observed by X‐ray crystallography. Heat of formation in the solid phase at 298 K was predicted to be 270.3 kJ/mol. Density of TNBI was predicted to be 1.919–1.956 g/cm³ depending upon the parameter sets of group additivity method. By using these values as input data, we estimated detonation velocity and C–J pressure to be 8.69–8.80 km/s and 34.5‐36.1 GPa, respectively. Impact sensitivity of TNBI was predicted to be 33 cm.     

Combustion Properties of Amino‐Substituted Guanidinium 4,4′,5,5′‐Tetranitro‐2,2′‐biimidazolate(N4BIM) Salts

This paper describes the combustion properties of the amino‐substituted guanidinium 4,4′,5,5′‐tetranitro‐2,2′‐biimidazolate (N4BIM) series, including the bis‐mono, di and triaminoguanidinium salts. These salts are of interest as propellant ingredient additives, and in particular, the bis‐triaminoguanidinium salt of N4BIM displays excellent burn rate and combustion behavior. Our combustion studies have shown that TAGN4‐BIM displays a fast burning rate and has the lowest pressure dependence exponent yet measured for a triaminoguanidinium salt.     

Bishydrazinium and Diammonium Salts of 4,4′,5,5′‐Tetranitro‐2,2′‐biimidazolate (TNBI): Synthesis and Properties

The diammonium ( 1 ) and bishydrazinium ( 2 ) salts of 4,4′,5,5′‐tetranitro‐2,2′‐biimidazolate (TNBI) were synthesized and their physical properties as well as predicted explosive performance characteristics are described. These dianionic salts are easily formed in good yields by reaction of TNBI with aqueous solutions of the cationic species. TNBI is synthesized from 2,2′‐biimidazole, which is ultimately synthesized by the condensation of aqueous glyoxal with ammonium acetate. The compounds were characterized by NMR spectroscopy, vibrational (FT‐IR and Raman) spectroscopy, elemental analysis, thermal analysis (DSC, VTS and calorimetry), and small scale safety testing (impact, friction, ESD). The measured densities and heats of formation are reported. The materials show promise for use in IM explosive and propellant formulations due to the combination of their calculated performances, thermal stability and insensitivity to stimuli.     

Synthesis and Energetic Properties of 4,4′,5,5′‐Tetranitro‐2,2′‐biimidazolate(N4BIM) Salts

This paper describes the synthesis and characterization of several salts of 4,4′,5,5′‐tetranitro‐2,2′‐biimidazolate (N4BIM). Each of the salts were characterized chemically, thermally, morphologically, as well as with respect to destructive stimuli (impact, electrostatic discharge, friction, thermal). These salts show promise as propellant ingredient additives, and in particular, the bis‐triaminoguanidinium salt of N4BIM displays excellent burn rate and combustion behavior. Our combustion studies have shown that TAGN4BIM displays a fast burning rate and has the lowest pressure dependence exponent yet measured for a triaminoguanidinium salt.     

Synthesis of 3,3′-Bis(2,2′,4,4′,6,6′-Hexanitortilbene)

This paper describes the synthesis of 3,3′bis(2,2′,4,4′,6,6′-hexanitrostilbene) (5). Based on the Ullmann reaction we prepared the title compound in nitrobenzene by using 3-chloro 2,2′,4,4′,6,6′-hexanitroztilbene (4) as the starting material and copper powder as the catalyst. (4) was reacted with hydrazine, not to yield a desired product, azo-3,3′bist(2,2′,4,4′,6,6′-hexanitrostilbene.) but to form a well-known explosive, 2,2′,4,4′,6,6′-hexanitrostibene (6). Differential scanning calorimetrical analysis has shown that (5) begins to decompose at the temperature of 298°C.     

2,2′,6,6′-Tetrabromo-3,3′,5,5′-tetramethyl-4,4′-biphenol (TTB)–flame retardant copolycarbonates and copolyesters

2,2′,6,6′-Tetrabromo-3,3′,5,5′-tetramethyl-4,4′-biphenol (TTB) is a new flame retardant monomer possessing a high degree of chemical and thermal stability. This brominated biphenol can be directly incorporated as a comonomer in condensation polymerizations. An example is the preparation of copolycarbonates of TTB and 2,2-(4-hydroxyphenyl)propane (BPA) via the aqueous caustic phosgenation method. The reaction of TTB with either ethylene oxide or ethylene chlorohydrin affords 4,4′-bis(2-hydroxyethoxy)-2,2′,6,6′-tetrabromo-3,3′,5,5′-tetramethylbiphenyl (TTB-Diol). This diol is melt polymerized into a series of terephthalate copolymers with 1,4 butanediol. The above copolymers possess flame retardancy, thermal stability, and good mechanical properties. These high-bromine-content copolymers are blended with nonhalogen-containing polymers to afford blends with specific degrees of flame resistance.     

Studies on the Synthesis of 2,2′,4,4′,6,6′-Hexanitrostilbene

The synthesis of 2,2′,4,4′,6,6′-hexanitrostilbene by oxidative coupling of 2,4,6-trinitrotoluene in the presence of metal catalysts has been studied. The effects of reaction parameters on product yields have been evaluated and mechanisms for the reaction are proposed.     

Synthesis and properties of new aromatic polyimides based on 2,2′‐dibromo‐4,4′,5,5′‐benzophenone tetracarboxylic dianhydride

New polyimides with enhanced thermal stability and high solubility were synthesized in common organic solvents from a new dianhydride, 2,2′‐dibromo‐4,4′,5,5′‐benzophenone tetracarboxylic dianhydride (DBBTDA). DBBTDA was used as monomer to synthesize polyimides by using various aromatic diamines. The polymers were characterized by IR and NMR spectroscopy and elemental analysis. These polyimides had good inherent viscosities in N‐methyl‐2‐pyrrolidinone (NMP) and also high solubility and excellent thermo‐oxidative stability, with 5 % weight loss in the range 433 to 597 °C. Copyright © 2004 Society of Chemical Industry     

A Parametric Study of the Synthesis of 4,4′,5,5′,7,7′-Hexanitro-1,1′-Binaphthyl

Conditions for the synthesis of 4,4′,5,5′,7,7′-hexanitrobinaphthyl( I ) from 1,1′-binaphthyl have been investigated. It has been found that( I ) can be prepared in 50% yield in a two-stage nitration process.     

Synthesis and properties of organosoluble polyimides derived from 2,2′‐dibromo‐ and 2,2′,6,6′‐tetrabromo‐4,4′‐oxydianilines

Two new aromatic diamines, 2,2′‐dibromo‐4,4′‐oxydianiline (DB‐ODA 4 ) and 2,2′,6,6′‐tetrabromo‐4,4′‐oxydianiline (TB‐ODA 5 ), have been synthesized by oxidation, bromination, and reduction of 4,4′‐oxydianiline (4,4′‐ODA). Novel polyimides 6a–f and 7a–f were prepared by reacting DB‐ODA ( 4 ) and TB‐ODA ( 5 ) with several dianhydrides by one‐step method, respectively. The inherent viscosities of these polyimides ranged from 0.31 to 0.99 dL/g (0.5 g/dL, in NMP at 30°C). These polyimides showed enhanced solubilities compared to those derived from 4,4′‐oxydianiline and corresponding dianhydrides. Especially, polyimides 7a , derived from rigid PMDA and TB‐ODA ( 5 ) can also be soluble in THF, DMF, DMAc, DMSO, and NMP. These polyimides also exhibited good thermal stability. Their glass transition temperatures measured by thermal mechanical analysis (TMA) ranged from 251 to 328°C. When the same dianhydrides were used, polyimides 7 containing four bromide substituents had higher glass transition temperatures than polyimides 6 containing two bromide substituents. The effects of incorporating more polarizable bromides on the refractive indices of polyimides were also investigated. The average refractive indices (n_av) measured at 633 nm were from 1.6088 to 1.7072, and the in‐plane/out‐of‐plane birefringences (Δn) were from 0.0098 to 0.0445. It was found that the refractive indices are slightly higher when polyimides contain more bromides. However, this effect is not very obvious. It might be due to loose chain packing resulted from bromide substituents at the 2,2′ and 2,2′,6,6′ positions of the oxydiphenylene moieties. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Crystallography and Structure–Property Relationships of 2,2″,4,4′,4″,6,6′,6″‐Octanitro‐1,1′ : 3′,1″‐Terphenyl (ONT)

An X‐ray crystallographic study of 2,2″,4,4′,4″,6,6′,6″‐octanitro‐1,1′ : 3′,1″‐terphenyl (ONT) has been carried out. The dihedral angles between benzene rings vary from 84.9° to 89.4°. Nonbinding interatomic distances of oxygen atoms inside all the nitro groups are shorter than the intermolecular contact radii for oxygen. On the basis of the DFT B3LYP/6‐31(d, p) method it was found that the difference between the X‐ray structure in the solid phase and DFT result for the gas phase is 98 kJ mol⁻¹, and the bearer of the highest initiation reactivity of the ONT molecule in the solid phase should be the nitro group at 4″‐position, in contrast to those at 4′‐ or 6′‐position that play this role in the isolated molecule. It has been stated that the nitro groups at the reaction centers of the ONT molecule are relatively well specified by their ¹⁵N NMR chemical shifts.     

Synthesis and Characterization of a Thermally and Hydrolytically Stable Energetic Material based on N‐Nitrourea

The novel primary explosive tetranitrodiglycoluril (TNDGU) was synthesized from glycoluril dimer. It was fully characterized by using NMR (¹H, ¹³C), IR spectroscopy, and elemental analysis. X‐ray diffraction revealed that the crystals of TNDGU belong to triclinic system with space group P . The thermal behavior of TNDGU was studied using DSC methods. TNDGU exhibited good thermal stability with a decomposition temperature of 284.8 °C. TNDGU was also more resistant to hydrolysis compared to other nitrourea analogues. Additionally, density, enthalpy of formation, detonation velocity (VOD), and detonation pressure of TNDGU were predicted and it was found that TNDGU is a potential powerful explosive with a calculated density of 1.93 g cm⁻³, a detonation velocity of 8305 m s⁻¹ and low sensitivity to electric discharge.     

Crystallography and Structure–Property Relationships in 2,2′,2″,2′′′,4,4′,4″,4′′′,6,6′,6″,6′′′‐Dodecanitro‐1,1′ : 3′1″ : 3″,1′′′‐ Quaterphenyl (DODECA)

X‐ray crystallographic study of 2,2′,2″,2′′′,4,4′,4″,4′′′,6,6′,6″,6′′′‐dodecanitro‐1,1′ : 3′1″ : 3″,1′′′‐quaterphenyl (DODECA) has been carried out. Nonbonding interatomic distances of oxygen atoms inside of all the nitro groups are shorter than those corresponding to the intermolecular contact radii for oxygen. By means of the DFT B3LYP/6‐31(d, p) method a difference of 136 kJ mol⁻¹ between the X‐ray and DFT structures of DODECA was found. The bearer of the highest initiation reactivity in its molecule in solid phase should be the nitro group at 4′′′‐position, in contrast to those at 2′‐ or 2″‐positions in its isolated molecule. The most reactive nitro group in the DODECA molecule can be well specified by the relationship between net charges on nitro groups and charges on their nitrogen atoms, both of them for the X‐ray structure. The ¹⁵N chemical shift, corresponding to this nitro group for the initiation by impact and shock, correlates very well with these shifts of the reaction centers of the other six “genuine” polynitro arenes.     

Synthesis,Structure and Sensing Property of Novel Zinc(II) Framework with Mixed 3,3′,5,5′‐Tetra(1H‐imidazol‐1‐yl)biphenyl and 2,6‐Naphthalenedicarboxylate Ligands

With increasing use of antibiotics, it becomes more and more important for selectively and sensitively detecting antibiotics. In this work, a new Zn(II) framework [Zn₂(L)(NDC)(HCOO)₂] ? 2H₂O ( 1 ) was achieved by using organic ligands 3,3′,5,5′‐tetra(1H‐imidazol‐1‐yl)biphenyl (L) and 2,6‐naphthalenedicarboxylic acid (H₂NDC). 1 has three‐dimensional (3D) framework structure and exhibits strong luminescence in the solid state as well as in the suspended acetonitrile solution. Furthermore, it was found that the emission of 1 can be quenched efficiently by trace amounts of nitrofuran antibiotics (NFs) including nitrofurazone (NZF), furazolidone (FZD) and nitrofurantoin (NFT) with detection limits of 184, 243 and 263 ppb for NZF, FZD and NFT, respectively, even in the presence of other antibiotics such as penicillin (PCL).     

Synthesis and characterization of organosoluble polyfluorinated polyimides derived from 3,3′,5,5′‐tetrafluoro‐4,4′‐diaminodiphenylmethane and various aromatic dianhydrides

A polyfluorinated aromatic diamine, 3,3′, 5,5′‐tetrafluoro‐4,4′‐diaminodiphenylmethane (TFDAM), was synthesized and characterized. A series of polyimides, PI‐1–PI‐4, were prepared by reacting the diamine with four aromatic dianhydrides via a one‐step high‐temperature polycondensation procedure. The obtained polyimide resin had moderate inherent viscosity (0.56–0.68 dL/g) and excellent solubility in common organic solvents. The polyimide films exhibited good thermal stability, with an initial thermal decomposition temperature of 555°C–621°C, a 10% weight loss temperature of 560°C–636°C, and a glass‐transition temperature of 280°C–326°C. Flexible and tough polyimide films showed good tensile properties, with tensile strength of 121–138 MPa, elongation at break of 9%–12%, and tensile modulus of 2.2–2.9 GPa. The polyimide films were good dielectric materials, and surface and volume resistance were on the order of a magnitude of 10¹⁴ and 10¹⁵ Ω cm, respectively. The dielectric constant of the films was below 3.0 at 1 MHz. The polyfluorinated films showed good transparency in the visible‐light region, with a cutoff wavelength as low as 302 nm and transmittance higher than 70% at 450 nm. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1442–1449, 2007     

A Parametric Study of the Synthesis of 2,2′,4,4′,6,6′-Hexanitrostilbene from trinitrotoluene and sodium hypochlorite

The synthesis of 2,2′,4,4′,6,6′-hexanitrostilbene by the action of alkaline sodium hypochlorite on 2,4,6-trinitrotoluene has been studied. The effects of time, temperature, pH, solvent composition and mode of TNT addition on the yield of HNS are discussed. The reaction, usually referred to as the Shipp synthesis, is shown to be highly susceptible to variations in process conditions, particularly base and water concentrations. The conversion of 2,4,6-trinitrobenzyl chloride, an intermediate in the Shipp reaction, to HNS has also been examined.     

A Convenient Synthesis of 2,2′,6,6′‐Tetramethoxy‐ 4,4′‐bis(dicyclohexylphosphino)‐3,3′‐bipyridine (Cy‐P‐Phos): Application in Rh‐Catalyzed Asymmetric Hydrogenation of α‐(Acylamino)acrylates

The first example of the synthesis of an axially chiral bis(aryldicyclohexylphosphine) dioxide via catalytic hydrogenation of the optically resolved parent bis(aryldiphenylphosphine) dioxide was reported. The procedure for the synthesis of Cy‐P‐Phos ( 4d ) has thus successfully avoided the need for an otherwise lengthy synthetic route owing to the π‐excessive nature of one of the aryl groups in the latter. The use of Cy‐P‐Phos in the Rh(I)‐catalyzed asymmetric hydrogenation of the derivatives of methyl (Z)‐2‐acetamidocinnamate gave significantly higher rates of reaction as compared to the use of the previously reported optimal ligand Xyl‐P‐Phos ( 4c ) whilst the level of enantioselectivity was essentially maintained.     

Synthesis of 3′,4′‐disubstituted terthiophenes. Characterization and electropolymerization. I. 3′,4′‐dibromo‐2,2′:5′,2″‐terthiophene in photovoltaic display

Recent studies on conducting polymers have demonstrated that polymers of 3‐substituted thiophene produce very stable compounds. Although this kind of substitution improves the regularity, structural defects still exist. To overcome this drawback, the polymerization of 3,4‐disubstituted thiophene is proposed as a convenient way of synthesizing regular, highly conjugated conductive polymers. Our interest is thus focused on the synthesis of tetra‐substituted thiophene derivatives, their polymerization, electrochemical properties, spectral characteristics, oxidizing potential, and the feasibility of photocells development. In this article, we report the synthesis and characterization of 3′,4′‐dibromo‐2,2′:5′,2″‐terthiophene which, as such or modified, may be a good starting product for obtaining new monomers of 3′,4′‐disubstituted terthiophenes, that would allow the effect of the substituents on the properties of the respective polymers to be studied. In addition, the monomer was electropolymerized and the resulting deposit was electrochemically and morphologically characterized. Two conclusions were drawn: first, more uniform and homogeneous layers than those of polythiophene are obtained; second, the thin layers of the polymer, electron acceptors, absorb in the visible. Finally, photocells were assembled to investigate their photovoltaic effect. Although the so prepared solar cells showed some photovoltaic effect, the yield was low.© 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 5314–5321, 2006     

Insensitive High Explosives II: 3,3′‐Diamino‐4,4′‐azoxyfurazan (DAAF)

This paper reviews the synthesis, properties, performance, and safety of the insensitive explosive 3,3′‐diamino‐4,4′‐azoxyfurazan (DAAF, C₄H₄N₈O₃), CAS‐No. [78644‐89‐0], and 18 formulations based on it. Though having a moderate crystal density only, DAAF offers high positive heat of formation and hence superior performance when compared with TATB. It is friction and impact insensitive but is more sensitive to shock than TATB and has an exceptionally small critical diameter and performs very well at low temperatures unlike other insensitive explosives. 39 references to the public domain are given. For Part I see Ref. [1].     

Synthesis of Substituted 2,2′‐Bipyridines and 2,2′:6′,2′′‐Terpyridines by Cobalt‐Catalyzed Cycloaddition Reactions of Nitriles and α,ω‐Diynes with Exclusive Regioselectivity

A variety of substituted 2,2′‐bipyridines were synthesized by a 1,2‐bis(diphenylphosphino)ethane (dppe)/cobalt chloride hexahydrate (CoCl₂⋅6 H₂O)/zinc‐catalyzed [2+2+2] cycloaddition reaction of diynes and nitriles, with all reactions exhibiting exclusive regioselectivity. Thus, symmetrical and unsymmetrical 1,6‐diynes and 2‐cyanopyridine reacted in the presence of 5 mol % of dppe, 5 mol % of CoCl₂⋅6 H₂O and 10 mol % of zinc powder to provide the corresponding 2,2′‐bipyridines. Under identical reaction conditions, 1‐(2‐pyridyl)‐1,6‐diynes and nitriles reacted smoothly with exclusive regioselectivity to produce 2,2′‐bipyridines in good yield. 2,2′‐Bipyridines were also obtained by the double [2+2+2] cycloaddition reaction of 1,6,8,13‐tetraynes with nitriles. Similarly, 2,2′:6′,2′′‐terpyridines were synthesized from 1‐(2‐pyridyl)‐1,6‐diyne and 2‐cyanopyridine. The regiochemistry observed can be explained by considering the electronic nature of cobaltacyclopentadiene intermediates and nitriles. A survey of the exclusive regiochemical trend gives reasonable credence to the synthetic potential of the present method.