Development of Sodium Carboxymethyl Cellulose-based Poly(acrylamide-co-2acrylamido-2-methyl-1-propane sulfonic acid) Hydrogels for In Vitro Drug Release Studies of Ranitidine Hydrochloride an Anti-ulcer Drug

The formation of sodium carboxymethyl cellulose (SCMC) based semi-interpenetrating networks (semi-IPN) with poly(acylamide-co-2-acrylamido-2-methy-l-propanesulfonic-acid) hydrogels. The hydrogels were prepared by free-radical polymerization using redox initiator. The characterizations of hydrogels were done by swelling experiments, FTIR spectroscopy and DSC analysis. Morphology of the samples were examined by SEM. Experimental results indicate that the semi-IPN hydrogel containing 0.10 g of SCMC and 5.829 mM of AMPS, shows the highest swelling capacity (64.83 g/g). The swelling behavior of the semi-IPN hydrogel (AS5) was studied in different pH solutions. The ranitidine hydrochloride drug loading and release of the semi-IPN hydrogels were studied by using a UV spectrophotometer.     

Novel metronidazole-loaded hydrogel as a gastroretentive drug delivery system

A metronidazole-loaded hydrogel was synthesized by free radical polymerization using dimethylaminoethyl methacrylate (DMAEMA) monomer and triethyleneglycol dimethacrylate (TEGDA) and methylene bisacrylamide (MBA) as cross-linkers. The DMAEMA hydrogels were cross-linked with 5 and 10% MBA or with 0.1, 0.5, 1 and 4% TEGDA as cross-linking agents. Ammonium persulfate and tetramethyl ethylene diamine were used as initiator and catalyst, respectively. The prepared hydrogels were characterized, and the effect of cross-linking agent content on the swelling behavior and in vitro drug release of hydrogels was investigated. The results of X-ray diffractometry, differential scanning calorimetry and Fourier transform infrared spectroscopy studies indicated that the prepared hydrogels possessed an amorphous morphology and there was not any interaction between the hydrogel polymers and metronidazole as drug, which resulted in the dependence of drug release on the physicochemical characteristics of hydrogel such as swelling, polymer erosion, and surface morphology. According to the results, the hydrogel containing 0.5% TEGDA which was prepared by freeze-drying method exhibited a porous structure with a high swelling ratio and displayed a sustained and complete drug release. It could be concluded that the hydrogel developed by this facile method is a good candidate with a potential for use in gastroretentive drug delivery systems.     

Studies on preparation and swelling properties of the N-isopropylacrylamide/chitosan semi-IPN and IPN hydrogels

Semi-interpenetrating network (semi-IPN) polymer gels and interpenetrating network (IPN) polymer gels with thermosensitivity were prepared by introducing a biodegradable polymer, chitosan, into the N-isopropyacrylamide (PNIPAAm) gel system. The swelling behavior, temperature sensitivity, pH sensitivity, gel strength, and drug-release behavior of PNIPAAm/chitosan semi-IPN and IPN hydrogels were investigated. The results indicated that the NIPAAm/chitosan semi-IPN and IPN hydrogels exhibited pH and temperature-sensitivity behavior and could slow drug release and diffusion from the gels. From the stress–strain curves of the hydrogels, the compression moduli of IPN gels containing crosslinked chitosan were higher than those of semi-IPN gels. This is because IPN gels have a more compact structure. The morphology of PNIPAAm/chitosan hydrogels was also investigated. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 2487–2496, 2001     

pH- and thermo-sensitive semi-IPN hydrogels composed of chitosan, <Emphasis Type="Italic">N</Emphasis>-isopropylacrylamide,and poly(ethylene glycol)-<Emphasis Type="Italic">co</Emphasis>-poly(ε-caprolactone) macromer for drug delivery

In this study, semi-IPN chitosan/poly(N-isopropylacrylamide) (PNIPAAm) hydrogels have been prepared via in situ UV-photo-crosslinking of N-isopropylacrylamide monomer using poly(ethylene glycol)-co-poly(ε-caprolactone) (PEG-co-PCL) macromer as a crosslinker in the presence of chitosan. Swelling properties of the resultant hydrogels were studied by investigating pH- and temperature dependence of equilibrium swelling ratio and oscillatory swelling–deswelling kinetics. It was found that semi-IPN hydrogels responded to both temperature and pH changes, and such stimuli-responsiveness was rapidly reversible. The rheological measurements demonstrated that the incorporation of chitosan greatly improved the mechanical strength of the hydrogels prepared. The release profiles of bovine serum albumin (BSA) from the hydrogels were also evaluated. The results showed that the release rate of BSA was higher in pH 2.0 buffer solution than in pH 7.4 buffer solution at 37 °C. Such double-sensitive hydrogels have the potential to use as smart carriers for drug delivery systems.     

Heterogeneous and homogeneous structure dextran–poly(methacrylic acid) interpenetrating network hydrogels: synthesis and an application study

pH‐sensitive dextran–poly(methacrylic acid) (Dext–pMeAc) full interpenetrating network hydrogels (INHs) were prepared by simultaneous radical polymerization of methacrylic acid monomer (MeAc) and Dext polymer chains in the presence of N,N‐methylenebisacrylamide (MBA) as crosslinker in aqueous solution. These hydrogels were investigated as a drug carrier. The influence of MeAc and MBA contents in the network hydrogels on the swelling behaviour and mechanical strength of prepared Dext–pMeAc INHs was evaluated. Dext–pMeAc INHs were characterized by Fourier transform IR spectroscopy, and kinetic swelling measurements were carried out in deionized water and in simulated gastric fluids (pH 1.1 and pH 7.4). Dext–pMeAc/1‐1, Dext–pMeAc/3‐1 and Dext–pMeAc/5‐1 hydrogels with molar ratios of n_Dext/n_MeAc = 10 and n_MBA/n_Dext = 10, 30 and 50 respectively showed a core–shell structure when they swelled. This phenomenon was not observed in Dext–pMeAc/5‐2, Dext–pMeAc/5‐3 and Dext–pMeAc/5‐5 hydrogels containing a higher amount of Dext in the gels. The swelling data proved the formation of INHs with pH‐sensitive behaviour. A drug release study was performed using Rhodamine 6G fluorescent dye as a model hydrophilic bioactive molecule. The in vitro release rate of Rhodamine 6G from Dext–pMeAc/5‐3 hydrogel was dependent on the pH of the release medium. Copyright © 2012 Society of Chemical Industry     

A Study on the Effect of Butyl Methacrylate Content on Swelling and Controlled-Release Behavior of Poly (Acrylamide-co-Butyl-Methacrylate-co-Acrylic Acid) Environment-Responsive Hydrogels

Poly (acrylamide-co-butyl methacrylate-co-acrylic acid) [poly (AAm-co-BMA-co-AAc)]-based environment-sensitive hydrogels were prepared by varying the butyl methacrylate (BMA) content, in the range of 20 to 66% (wt. of the total monomer) in the hydrogel. The effect of BMA content on the swelling behavior of the hydrogels was studied by keeping the other two monomers' content constant at different pH and temperatures. The synthesized hydrogels were characterized by various techniques, and release kinetics was analyzed. The application and effect of the BMA content of these hydrogels in controlled drug release of acetaminophen and model drugs were investigated.     

Synthesis and Characterizations of Macroporous Poly(acrylamide-2-acrylamido-2-methyl-1-propanesulfonic acid) Hydrogels for In Vitro Drug Release of Ranitidine Hydrochloride

Macroporous hydrogels were prepared with acrylamide (AM) and 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) as well as with anhydrous dextrose (AD) as porogen by crosslinking with N,N¹-methylenebisacrylamide (MBA). The chemical structure of hydrogels is characterized by Fourier transform infrared (FTIR) spectroscopy. Morphological studies done by scanning electron microscopy (SEM) showed the macroporous nature of the hydrogels. Swelling studies of hydrogels were done in distilled water, in aqueous NaCl solution and in different pH solutions. In addition, drug release studies of selected macroporous hydrogels (DAMPS1, DAMPS4, DAMPSM1 and DAMPSM3) are also investigated.     

pH-sensitive IPN hydrogel based on poly (aspartic acid) and poly (vinyl alcohol) for controlled release

Various pH-sensitive sequential interpenetrating polymer network (IPN) hydrogels were prepared by introducing poly (vinyl alcohol) (PVA) hydrogel into Poly (aspartic acid) (PASP) hydrogel by freeze-thawing treatment to obtain a novel drug delivery system to the intestine. The structure and the morphologies of the prepared hydrogels were studied by Fourier Transform Infrared Spectroscopy (FTIR) and scanning electron microscopy (SEM). The thermal behavior and crystallinity of the hydrogels were characterized by differential scanning calorimetry (DSC) and X-ray diffraction (XRD). Their pH-sensitive properties moreover were studied and the results revealed that both PASP hydrogel and IPN hydrogels exhibited excellent pH-sensitivity. Furthermore, the controlled drug release properties of the hydrogels were also evaluated and results indicated that by increasing the PVA fraction in the IPN hydrogel, the release of Naproxen sodium was improved. These results show that the IPN hydrogels could be a suitable carrier for site-specific drug delivery in the intestine.     

Preparation and Swelling Study of a pH-Dependent Interpolymeric Hydrogel Based on Chitosan for Controlled Drug Release

Novel pH-dependent, biodegradable interpolymeric network (IPN) hydrogels were prepared for controlled drug release investigations. The IPN hydrogels were prepared by irradiation of solutions of N-acryloyglycine (NAGly), polyethylene glycol diacrylate (PEGDA) mixed with chitosan, in the presence of a lower amount of glutaraldehyde as the crosslinker and using 2,2-dimethoxy-2-phenyl acetophenone as the photo-initiator. The equilibrium swelling studies were carried out for the gels at 37°C in buffer solutions of pH 2.1 and 7.4 (simulated gastric and intestinal fluids, respectively). 5-Fluorouracil (5-FU) was entrapped, as a model therapeutic agent, in the hydrogels and equilibrium-swelling studies were carried out for the drug-entrapped gels at 37°C. The in-vitro release profiles of the drug were established at 37°C in pH 2.1 and 7.4.     

HPMC/PNIPAAm温度敏感性水凝胶的制备及其对5-氟尿嘧啶的控制释放

以线型的羟丙基甲基纤维素(HPMC)和N-异丙基丙烯酰胺 (NIPAAm) 为原料,制备具有温度敏感性的半互穿网络水凝胶.采用荧光显微镜、红外光谱等对凝胶结构进行表征,并对不同HPMC / NIPAAm配比(W/W)的水凝胶的温度敏感性、溶胀和退溶胀动力学进行了研究.另外,以5-氟尿嘧啶(5-FU)为目标化合物,研究了...     

Electrically controlled release of 5-fluorouracil from conductive gelatin methacryloyl-based hydrogels

Herein, electro-responsive hydrogels were obtained by incorporation of poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT/PSS) into the gelatin methacryloyl (GelMA) by using photopolymerization technique. Hydrogels were characterized by FTIR and scanning electron microscopy analyses. Cytotoxicity tests were performed by L929 cell lines to determine cell compatibility. Swelling tests were conducted to investigate the water uptake capacity of hydrogels. 5-fluorouracil (5-FU) was selected as a model drug as it is known as a topical drug for some skin cancer type treatment. The release of 5-FU from the hydrogel was provided in efficient and controlled manner at simulated skin cancer (pH = 5.5) and under 0 and 1.5 V. The simulated drug delivery experiments conducted in vitro revealed that the drug releasing amount was higher when voltage is applied to the hydrogels. All results visualized that the obtained GelMA-based PEDOT/PSS hydrogels with enhanced electrical properties could be a potential candidate as an electrically sensitive drug carrier for treatment of skin cancer in the future applications. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 46914.     

Synthesis and Characterization of New Biodegradable Injectable Thermosensitive Smart Hydrogels for 5-Fluorouracil Delivery

In this paper, injectable, thermosensitive smart hydrogel local drug delivery systems (LDDSs) releasing the model antitumour drug 5-fluorouracil (5-FU) were developed. The systems were based on biodegradable triblock copolymers synthesized via ring opening polymerization (ROP) of ε-caprolactone (CL) in the presence of poly(ethylene glycol) (PEG) and zirconium(IV) acetylacetonate (Zr(acac)₄), as co-initiator and catalyst, respectively. The structure, molecular weight (M_n) and molecular weight distribution (Đ) of the synthesized materials was studied in detail using nuclear magnetic resonance (NMR) and gel permeation chromatography (GPC) techniques; the optimal synthesis conditions were determined. The structure corresponded well to the theoretical assumptions. The produced hydrogels demonstrated a sharp sol–gel transition at temperature close to physiological value, forming a stable gel with good mechanical properties at 37 °C. The kinetics and mechanism of in vitro 5-FU release were characterized by zero order, first order, Higuchi and Korsmeyer–Peppas mathematical models. The obtained results indicate good release control; the kinetics were generally defined as first order according to the predominant diffusion mechanism; and the total drug release time was approximately 12 h. The copolymers were considered to be biodegradable and non-toxic; the resulting hydrogels appear to be promising as short-term LDDSs, potentially useful in antitumor therapy.     

Preparation and characterization of pH sensitive crosslinked Linseed polysaccharides-co-acrylic acid/methacrylic acid hydrogels for controlled delivery of ketoprofen

Some pH responsive polymeric matrix of Linseed (Linum usitatissimum), L. hydrogel (LSH) was prepared by free radical polymerization using potassium persulfate (KPS) as an initiator, N,N-methylene bisacrylamide (MBA) as a crosslinker, acrylic acid (AA) and methacrylic acid (MAA) as monomers; while ketoprofen was used as a model drug. Different formulations of LSH-co-AA and LSH-co-MAA were formulated by varying the concentration of crosslinker and monomers. Structures obtained were thoroughly characterized using Fourier transforms infrared (FTIR) spectroscopy, XRD analysis and Scanning electron microscopy. Sol-gel fractions, porosity of the materials and ketoprofen loading capacity were also measured. Swelling and in vitro drug release studies were conducted at simulated gastric fluids, i.e., pH 1.2 and 7.4. FTIR evaluation confirmed successful grafting of AA and MAA to LSH backbone. XRD studies showed retention of crystalline structure of ketoprofen in LSH-co-AA and its amorphous dispersion in LSH-co-MAA. Gel content was increased by increasing MBA and monomer content; whereas porosity of hydrogel was increased by increasing monomer concentration and decreased by increasing MBA content. Swelling of copolymer hydrogels was high at pH 7.4 and low at pH 1.2. Ketoprofen release showed an increasing trend by increasing monomer content; however it was decreased with increasing MBA content. Sustained release of ketoprofen was noted from copolymers and release followed Korsmeyer-Peppas model.     

Preparation and characterization of pH sensitive poly(vinyl alcohol)/sodium carboxymethyl cellulose IPN microspheres for in vitro release studies of an anti-cancer drug

Interpenetrating polymeric network microspheres (IPNMs) consisting of poly(vinyl alcohol) and sodium carboxymethylcellulose were prepared by water-in-oil emulsion method and were cross-linked with glutaraldehyde. 5-Fluorouracil (5-FU), an anti-cancer drug, was loaded into IPNMs via in situ method. These IPNMs have been characterized by Fourier transform infrared spectroscopy, which confirms the cross-linking of IPNMs through glutaraldehyde. Differential scanning calorimetry and X-ray diffraction analysis of the drug-loaded IPNMs have confirmed uniform molecular dispersion of 5-FU in the IPNMs. Particle size measured using optical microscopy gave an average size of 80–250 μm. Scanning electron microscopy also confirmed the formation of microspheres with smooth surface and spherical shape. Encapsulation efficiency of 5-FU in these IPNMs was achieved up to 62%. Drug release profiles of the IPNMs at different pH conditions (pH 1.2 and 7.4) confirmed that microspheres formed are pH sensitive, resulting controlled release of drug during in vitro dissolution experiments. It has been analyzed with an empirical equation to understand the diffusion nature of drug through the IPNMs. Both encapsulation efficiency and release patterns are found to depend on the nature of the cross-linking agent as well as amount of drug loading. In vitro release studies indicated the release of 5-FU for more than 10 h.     

Effect of the crosslinking with 1,1,1-trimethylolpropane trimethacrylate on 5-fluorouracil release from poly(2-hydroxyethyl methacrylate) hydrogels

The aim of this study is to examine the influence of crosslinking density on 5-Fluorouracil release from poly(2-hydroxyethyl methacrylate) (PHEMA) hydrogels crosslinked with 1,1,1-trimethylolpropane trimethacrylate (TPT). PHEMA hydrogels were synthesized by bulk polymerization with different proportions of TPT (1 – 10 wt%) as crosslinker agent and ammonium persulphate as initiator, enabling polymerization in the feed mixture in the presence of water. As a result, 5-FU could be trapped by including it as a sodium salt in the feed mixture of polymerization. Discs with 5-FU loads between 1 – 16 mg/disc were obtained. Swelling and 5-FU release kinetics studies were carried out in saline solution at 310 K. The diffusion studies were in accordance with Fick's second law during the initial stages, enabling the diffusion coefficients of the process to be determined. The time required for discs to reach total 5-FU release was between 35 h and 160 h and was a function of crosslinking density of the gels and 5-FU load of the discs. Received: 12 July 1996/Revised version: 8 October 1996/Accepted: 15 October 1996     

Poly(vinyl alcohol) Based pH Responsive Semi-IPN Hydrogels: A Comparative Swelling Investigation

The semi-interpenetrating polymer network (IPN) hydrogels composed of poly(vinyl alcohol) (PVA) and random copolymers of poly(acrylamide-co-sodium methacrylate), poly(AAm-co-NMA); poly(acrylamide-co-potassium methacrylate), poly(AAm-co-KMA); poly(acrylamide-co-maleic acid), poly(AAm-co-MA) were prepared by conventional co-polymerization employing ammonium persulphate (APS)/N,N,N¹,N¹-tetraethylmethylenediamine (TMEDA) as redox initiating system in presence of N,N¹-methylenebisacrylamide (MBA) as a crosslinker. The swelling behavior of these semi-IPN hydrogels were compared in detail in various swelling media, including different pH, salt, and biological fluids.     

Interpenetrating polymeric network hydrogels for potential gastrointestinal drug release

New interpenetrating polymeric network (IPN) hydrogels based on chitosan (C), poly(N‐vinyl pyrrolidone) (PVP) and poly(acrylic acid) (PAAc), crosslinked with glutaraldehyde (G) and N,N‘‐methylenebisacrylamide (MBA), were prepared and investigated for potential gastrointestinal drug delivery vehicles utilizing a model drug, amoxicillin. IPN hydrogels were synthesized by simultaneous polymerization/crosslinking of acrylic acid monomer in the presence of another polymer (C) and crosslinker (G, MBA). Three different concentrations of glutaraldehyde were used (0.5, 1.0 and 2.0 w/w) to control the overall porosity of the hydrogels, named C‐P‐AAc/0.5, C‐P‐AAc/1.0 and C‐P‐AAc/2.0, respectively. Spectroscopic and thermal analyses such as Fourier transform infrared spectroscopy, thermogravimetric analysis and thermomechanical analysis were performed for IPN characterization. Equilibrium swelling studies were conducted for pH and temperature response behavior. Swelling studies were also carried out in simulated gastric fluid of pH = 1.1 and simulated intestinal fluid of pH = 7.4 to investigate possible site‐specific drug delivery. It was found that the release behavior of the drug from these IPN hydrogels was dependent on the pH of the medium and the proportion of crosslinker in the IPN. It was observed that amoxicillin release at pH = 7.4 was higher than at pH = 1.1. The analysis of the drug release showed that amoxicillin was released from these hydrogels through a non‐Fickian diffusion mechanism. Copyright © 2007 Society of Chemical Industry     

Preparation of pH‐sensitive poly(vinyl alcohol‐g‐methacrylic acid) and poly(vinyl alcohol‐g‐acrylic acid) hydrogels by gamma ray irradiation and their insulin release behavior

A series of pH‐responsive hydrogels were studied as potential drug carriers for the protection of insulin from the acidic environment of the stomach before releasing in the small intestine. Hydrogels based on poly(vinyl alcohol) networks grafted with acrylic acid or methacrylic acid were prepared by a two‐step process. Poly(vinyl alcohol) hydrogels were prepared by gamma ray irradiation (50 kGy) and then followed by grafting either acrylic acid or methacrylic acid onto these poly(vinyl alcohol) hydrogels with subsequent irradiation (5–20 kGy). These graft hydrogels showed pH‐sensitive swelling behavior and were used as carriers for the controlled release of insulin. The in vitro release of insulin was observed for the insulin‐loaded hydrogels in a simulated intestinal fluid (pH 6.8) but not in a simulated gastric fluid (pH 1.2). The release behavior of insulin in vivo in a rat model confirmed the effectiveness of the oral delivery of insulin to control the level of glucose. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 636–643, 2004     

Synthesis and Characterization of Temperature-Sensitive Poly(N-isopropylacryamide) Hydrogel with Comonomer and Semi-IPN material

A series of temperature and pH sensitive hydrogels were synthesized using N-isopropylacrylamide (NIPAAm) as main monomer, sodium alginate (SA) as semi-IPN material, ethyl acrylate (EA) and acrylic acid (AA) as comonomer, and N-maleyl chitosan (N-MACH) as cross-linker. The temperature and pH sensitive behavior, swelling/deswelling kinetics of the hydrogels were investigated. And the mechanism of the phase transition was summed up. Sodium alginate/Poly(N-isopropylacryamide) semi-interpenetrating polymer network (SA/PNIPAAm semi-IPN) hydrogels exhibited a lower critical solution temperature (LCST) at about 32 °C with no significant deviation from the conventional PNIPAAm hydrogels. Poly(N-isopropylacryamide-co-ethyl acrylate) (P(NIPAAm-co-EA)) hydrogels exhibited LCST at 29–31°C, increasing the amount of EA in the hydrogel gradually decreased the LCST. Poly(N-isopropylacryamide-co-acrylic acid) [P(NIPAAm-co-AA)] hydrogels exhibited LCST at 34–39°C, with decreasing NIPAAm/AA from 96/4 to 92/8 and 90/10, the LCST increased from 34°C to 37°C and 39°C. In the swelling/deswelling kinetics, all the dried hydrogels exhibited fast swelling/deswelling behavior, which might be attributed to macroporous structures of the hydrogels.     

Preparation and characterization of nanosized P(NIPAM-MBA) hydrogel particles and adsorption of bovine serum albumin on their surface

Thermosensitive polymer hydrogel particles with size varying from 480 to 620 nm were prepared through precipitation copolymerization of N-isopropylacrylamide with N,N′-methylenebisacrylamide (MBA) in water with ammonium persulfate as the initiator. Only polymer hydrogels without any coagula were obtained when MBA concentration in the monomer mixture was kept between 2.5 and 10.0 wt%; with increased MBA concentration, the monomer conversion was enhanced, the size of the hydrogels was increased, and their shrinking was lessened when heated from 25°C to 40°C. Bovine serum albumin adsorption on the surface of the hydrogels of different MBA content was measured at different pH levels and under different temperatures. The results demonstrated that the adsorption of the protein on the hydrogels could be controlled by adjusting the pH, the temperature of adsorption, and the crosslinking in the hydrogels. The results were interpreted, and the mechanisms of the polymerization were proposed.