Improved multimode pushover procedure for asymmetric in plan buildings under biaxial seismic excitation—application to tall buildings

An improved version of a recently developed multimode pushover procedure for asymmetric in plan buildings under biaxial seismic excitation is presented and evaluated. The proposed methodology is quite similar to the well‐known modal pushover analysis. However, the establishment of the equivalent single‐degree‐of‐freedom systems is based on a new concept, which takes into account multidirectional seismic effects. The proposed methodology does not require independent analysis in the two orthogonal directions, and therefore, the application of simplified directional combination rules is avoided. The improvement presented here consists in definition of correction factors to be applied to the response values at the stiff side of buildings. An extensive evaluation study comprising applications to tall buildings is presented. The response parameters obtained from the proposed methodology in most cases envelope the values resulting from nonlinear dynamic analysis (NDA). Furthermore, the mean errors with regard to the NDA results are smaller than those obtained from a multimode pushover procedure comprising independent analysis along two horizontal axes and directional combination of the results. In general, the proposed methodology provides a reasonable estimation of the seismic performance of asymmetric buildings.     

An improved consecutive modal pushover procedure for estimating seismic demands of multi‐storey framed buildings

An improved consecutive modal pushover (ICMP) procedure is proposed to enhance the accuracy of conventional CMP procedure for estimating seismic demands of tall buildings. It accounts for inelastic structural properties and interaction between vibration modes. The displacement increment at the roof of buildings used in each stage of pushover analyses is modified based on the displacement contribution of each mode. The performance of the proposed ICMP procedure is verified against three high‐rise frames subjected to various ground motions. The results obtained from the ICMP procedure are compared with those from the nonlinear time history analysis, conventional pushover analysis, and CMP analysis. The comparison shows the advantages of the ICMP over the other pushover procedures. It is concluded that the ICMP procedure is more accurate than the CMP procedure.     

A consecutive modal pushover procedure for nonlinear static analysis of one-way unsymmetric-plan tall building structures

Seismic responses of unsymmetric-plan tall buildings are substantially influenced by the effects of higher modes and torsion. Considering these effects, in this article, the consecutive modal pushover (CMP) procedure is extended to estimate the seismic demands of one-way unsymmetric-plan tall buildings. The procedure uses multi-stage and classical single-stage pushover analyses and benefits from the elastic modal properties of the structure. Both lateral forces and torsional moments obtained from modal analysis are used in the multi-stage pushover analysis. The seismic demands are obtained by enveloping the peak inelastic responses resulting from the multi-stage and single-stage pushover analyses. To verify and appraise the procedure, it is applied to the 10, 15, and 20-storey one-way unsymmetric-plan buildings including systems with different degrees of coupling between the lateral displacements and torsional rotations, i.e. torsionally-stiff (TS), torsionally-similarly-stiff (TSS) and torsionally-flexible (TF) systems. The modal pushover analysis (MPA) procedure is implemented for the purpose of comparison as well. The results from the approximate pushover procedures are compared with the results obtained by the nonlinear response history analysis (NL-RHA). It is demonstrated that the CMP procedure is able to take into account the higher mode influences as well as amplification or de-amplification of seismic displacements at the flexible and stiff edges of unsymmetric-plan tall buildings. The extended procedure can predict to a reasonable accuracy the peak inelastic responses, such as displacements and storey drifts. The CMP procedure represents an important improvement in estimating the plastic rotations of hinges at both flexible and stiff sides of unsymmetric-plan tall buildings in comparison with the MPA procedure.     

An improved multidimensional modal pushover analysis procedure for seismic evaluation of latticed arch‐type structures under lateral and vertical earthquakes

Pushover methods for seismic assessment of buildings under multidimensional earthquakes have been studied and retrofitted. However, these current methods are not suitable when applied to widely adopted arch‐type structures characterized by strong geometrical nonlinearity and coupling effects. An improved multidimensional modal pushover procedure with two‐stage analyses is proposed for seismic evaluation of latticed arches. Taking overall multidimensional response into consideration, modal stiffness of the equivalent single‐degree‐of‐freedom system is derived, and its capacity curve is determined during the first‐stage analysis. To provide a deformation profile with algebraic signs of response retained, the second‐stage analysis is conducted using the pushover load pattern derived from modal displacement superposition. The objective of the improved procedure is to overcome the drawback of the conventional modal pushover method, which describes the capacity curve resorting to base shear and roof displacement, and that of quadratic combination rules which eliminate the sign reversals of response. To validate its serviceability, nodal displacements and element stresses, as well as the yielding members, of two typical latticed arches are calculated. Through comparative analysis, the results by the improved procedure exhibit good agreement with those by response history analysis. Additionally, this procedure demonstrates great superiority over the conventional method for its satisfying accuracy.