Semiquantitative analysis of thiophenic compounds in light cycle oil (LCO) using C NMR spectroscopy

S-methyltetrafluoroborate salts of the thiophenic compounds (CH₃-S⁺:BF₄⁻) present in LCO petroleum fractions were obtained and analyzed by ¹H and ¹³C NMR spectroscopy. The methylation of the samples was carried out using 99.5% ¹³C enriched methyl iodine, to improve the sensitivity of the technique. The amount of the methylated derivatives was determined by the internal standard method; using dioxane as a reference, 37 sulphur compounds were detected. Among them, benzo[b]thiophene, dibenzo[b,d]thiophene, and several isomers of methyl, dimethyl and trimethyl[b]benzothiophenes were the most abundant. With this research, it was demonstrated that NMR spectroscopy can be used to analyze thiophenic compounds from petroleum medium fractions.     

Quantitative Analysis of Dairy Phospholipids by 31P NMR

³¹P NMR analysis of samples prepared in a sodium cholate detergent system was assessed as a method for the quantitative measurement of dairy phospholipids. Major phospholipid (PL) classes measured included: phosphatidylcholine (PC), phosphatidylethanolamine (PE), phosphatidylserine (PS), phosphatidylinositol (PI), sphingomyelin (SM) and dihydrosphingomyelin (DHSM). The ³¹P NMR method was validated by comparison with a quantitative two-dimensional thin-layer chromatography (2D-TLC) technique. The 2D-TLC system was more sensitive, able to detect some minor compounds not observed by ³¹P NMR. However, ³¹P NMR is more suited to routine analysis, with sample analysis taking 36 min. The method was also more versatile and sample analysis was possible on high phospholipid containing materials without prior lipid extraction (e.g. buttermilk protein concentrate, beta serum liquid).     

Quantitative NMR-spektroskopische Analyse der Zusammensetzung von Glycerinfettsäureestermischungen

Quantitative NMR-spectroscopic analysis of the compounds of glycerol esters of fatty acids A simple analytical method is described for the determination of glycerol esters of fatty acids based on ¹³C-NMR spectroscopy. All ester compounds can be determined in less than 30 min. The NMR method is based on the oxygen influenced carbon atoms of the glycerol fragment providing the molar or the weight percent ratio of the ester mixture. In comparison to established analysis procedures in the field of fat chemistry, like high-temperature gas chromatography or HPLC, the data of the NMR analysis show suitable validation parameters. Additionally, the results of a round robin test are reported.     

Quality control of gasoline by H NMR: Aromatics, olefinics, paraffinics, and oxygenated and benzene contents

A simple and fast ¹H NMR method, without any pretreatment, was developed for quality control of gasoline. It is based on the average group molecular weight approach and relative-content concept involving aromatics, olefinics and paraffinics, including also ethanol and benzene contents. The ethanol content was evaluated for Brazilian samples, but the method can be easily adapted to any oxygenated compound (ex. MTBE), and to gasoline from other countries. Twenty two laboratory prepared gasoline samples (gasoline from Brazilian refineries plus hydrocarbon solvents) and thirty four real (i.e., Brazilian gas stations) gasoline samples were tested. The routine quality control carried out through the usual physicochemical analyses reached a level of confidence of 75% and 73% in detecting non conformity in laboratory and real gasoline samples, respectively. The NMR method was very superior reaching 100% and 97% of confidence, respectively. It was better suited for laboratories with high sample throughput since measurement time is short and only one NMR experiment is needed per sample.     

Measurement of water content and moisture distribution in sludge by 1H nuclear magnetic resonance spectroscopy

Moisture distribution in sludge is essential for the examination of dewatering problems; however, sufficiently rapid and accurate methods of sludge moisture measurement are currently lacking. Hence, this study investigated a low-field ¹H nuclear magnetic resonance (NMR) method for measuring water content and moisture distribution in sludge. Moisture content measured by NMR was closely correlated with the thermal drying method (R² = 0.999). The loss of mechanical bound water from sludge was the primary cause of the decrease in water content from 96 to 37% during thermal drying at 40°C. NMR is more accurate, rapid, and nondestructive than other water distribution measurement methods.     

Diffusional behavior of amino acids in solid-phase reaction field as studied by H pulsed-field-gradient spin-echo NMR method

The diffusion coefficients (D) of tert-butyloxycarbonyl-l-phenylalanine (Boc-Phe) in Merrifield network polystyrene gels, used as a solid-phase reaction field have been determined as a function of the amino acid concentration over the temperature range from 30 to 50 °C by means of the ¹H pulsed-field-gradient spin-echo NMR method. From these experimental results, it was found that the D value of Boc-Phe in DMF-d₇ solution, in DVB 1 and 2% cross-linked network polystyrene gels depends on the amino acid concentration. The D value of Boc-Phe·Cs(tert-butyloxycarbonyl-l-phenylalanine cesium) salt in the solid-phase reaction field under chemical reaction was determined at 50 °C. Further, it was found that the D value depends on the NMR observation time, that is the applied two field-gradient pulse interval. Details of its analysis were discussed.     

Determination of the iodine value of biodiesel using H NMR with 1,4-dioxane as an internal standard

Iodine values (IVs) of some biodiesel samples were analyzed using both ¹H NMR and a standard iodometric method. ¹H NMR was carried out with and without 1,4-dioxane as an internal standard (IS). The results obtained using ¹H NMR with 1,4-dioxane as an internal standard showed better linear fitting and correlation with the iodometric method than NMR without the IS. The proposed ¹H NMR_IS method allows determination of the IV using smaller samples than the iodometric method. Moreover, the determination can be carried out in less than 15 min, dramatically less than the time needed to carry out the iodometric method.     

Strain-induced crystallization of natural rubber as studied by high-resolution solid-state C NMR spectroscopy

A series of high-resolution solid-state ¹³C NMR experiments were performed on both unstretched and in situ stretched natural rubber samples. From the ¹³C CP/MAS spectra, it was found that natural rubber does form small crystals at room temperature though the degree of crystallinity is very small. Furthermore, from the ¹³C DD/MAS spectra, the crystalline signals were found to increase with the increase of draw ratio. ¹³C spin-lattice relaxation time (T₁) and ¹H spin-spin relaxation time (T₂) of in situ stretched natural rubber were measured for the first time, which provided further evidences for the conclusion that there exist crystals in both stretched and unstretched natural rubber samples. Quantitative ¹³C NMR measurements indicated that strain-induced crystallization occurs when the draw ratio reaches about 2.0 and the maximum crystallinity of our natural rubber samples can be as high as 19.3% upon stretching.     

A novel method for determination of polyester end-groups by NMR spectroscopy

An efficient, convenient and quantitative method for characterising polyester end-groups is described. We have found that trichloroacetyl isocyanate (TAI) reacts rapidly and quantitatively with both carboxyl [C(O)OH] and hydroxyl (OH) chain ends to form derivatives that can be readily determined by ¹H NMR spectroscopy. The TAI capped end-groups give rise to characteristic imidic NH resonances in a normally clear region of the ¹H NMR spectrum [δ∼10-11.5 for C(O)-O-C(O)-NH-C(O)CCl₃ from C(O)OH, δ∼8-9 for O-C(O)-NH-C(O)CCl₃ from OH]. The method has been successfully applied to quantitative determination of the end-groups of a wide variety of oligomeric polyesters. It has also been applied to higher molecular weight polyesters including commercial, bottle grade, poly(ethylene terephthalate) (PET) and PET based copolyesters (e.g. PETG).     

A 13C and 15N Solid State NMR Study of the Reactions of Acetone Oxime Adsorbed on FeZSM-5

The reactions of acetone oxime, a proposed reaction intermediate for the SCR (Selective Catalytic Reduction) of NO with propane on FeZSM-5, have been studied with ¹³C and ¹⁵N solid state MAS NMR (magic angle spinning nuclear magnetic resonance). FeZSM-5 with three different loading levels was prepared by the sublimation method. The thermal reactions of acetone [2-¹³C] oxime adsorbed on FeZSM-5 samples with different iron loadings were monitored by ¹³C MAS NMR by heating to the desired temperature and then cooling to room temperature for data acquisition. For the sample with the lowest iron loading (Fe/Al = 0.11), acetic acid and N-methyl-2-propanamine were formed by the decomposition of acetone oxime. For the samples with the higher iron loadings (Fe/Al = 0.69 and 0.91), acetone, N,N-methyl-2,2-propanediamine, and N-methyl-2-propanimine were formed by the decomposition of acetone oxime. ¹⁵N MAS NMR was used to investigate reactions of ¹⁵NO and acetone oxime on the FeZSM-5 samples. The formation of gas phase N₂ and N₂O was observed.     

Quantitative Si MAS NMR spectroscopy of cement and silica fume containing paramagnetic impurities

The low natural abundance and the long spin lattice relaxation time of ²⁹Si lead to long measurement times and/or low signal-to-noise ratios using ²⁹Si magic angle spinning NMR spectroscopy. By contrast, samples containing paramagnetic iron ions have much shorter relaxation times, making measurements up to seven times more efficient, but at the same time making quantitative analysis unreliable. To solve the problem, the spin-lattice relaxation times of ordinary Portland cement (opc) and silica fume with and without iron content has been determined with inversion recovery experiments. The effect of varying the spectrum repetition time on the quantitative analysis is demonstrated for mixtures of opc with silica fume. For opc and silica fume with iron impurities repetition times as short as 5 s has permitted accurate quantitative analysis of the silicates present in these materials.     

NMR determination of crystallinity for poly(?-l-lysine)

Crystallinity of poly(?-l-lysine) (?-PL) was discussed by analyzing the differences in the ¹H spin-spin relaxation times (T₂^H), the ¹³C spin-lattice relaxation times (T₁^C), and the ¹³C NMR signal shapes between the crystalline and the non-crystalline phases. The observed ¹H relaxation curve (free induction decay followed by solid-echo method) showed the sum of Gaussian and exponential decays. Similarly, the observed ¹³C relaxation curves obtained from the Torchia method were double-exponential. The ¹³C NMR spectrum of ?-PL was divided into the narrow and the broad lines by utilizing the intrinsic differences in the ¹H spin-lattice relaxation times in the rotating-frame between them, which are attributed to the crystalline and the non-crystalline phases, respectively. Even though the crystallinity is obtained from the identical NMR measurements, the estimated values are different with each other. The crystallinity estimated from the T₂^H differences was 75.8 ± 0.1% at 333 K and 60.7 ± 0.4% at 353 K. From the T₁^C differences, the value was estimated to be 62 ± 11%. Furthermore, the value estimated from the NMR signal separation was 54 ± 5%. In this study we have explained these discrepancies by the difference in susceptibility among the experiments for the inter-phase, which exists in-between the crystalline and the amorphous phases. Furthermore, the estimated crystallinity was ascertained by the X-ray diffraction experiment.     

Determination of unsaturated fatty acid composition by high-resolution nuclear magnetic resonance spectroscopy

High-resolution nuclear magnetic resonance (NMR) spectroscopy provides useful data for analyzing fatty acid compositions of edible vegetable oils. Quantitation of each fatty acid was carried out by evaluation of particular peaks. According to the ¹H NMR method, terminal methyl protons, divinyl protons, and allyl protons are useful to calculate linolenic acid, linoleic acid, and oleic acid, respectively. The ω-2 carbon, divinyl carbon, and allylic carbons were used for calculation of these acids by the ¹³C NMR method. Compositional results obtained by NMR coincided well with those of the conventional gas chromatography (GC) method. Results from ¹³C NMR were in better agreement with those from GC than were the results obtained by the ¹H NMR method.     

Solid-state nuclear magnetic resonance investigation of cation siting in LiNaLSX zeolites

The location of Li⁺ and Na⁺ cations in a series of dehydrated low-silica LiNaX zeolites (LiNaLSX, framework Si/Al ratio=1.0) were characterized by ⁷Li and ²³Na magic-angle spinning (MAS) nuclear magnetic resonance (NMR) spectroscopy. Depending on the Li⁺ content, up to three lines were observed in the ⁷Li MAS NMR spectra attributed to Li⁺ cations on SI′, SII and SIII sites. The ²³Na MAS NMR spectra of the pure sodium form NaLSX and of LiNaLSX samples with low Li⁺ contents contain up to five lines belong to Na⁺ cations located on SI, SI′, SII, and two different SIII′ sites. LiNaLSX zeolites containing more than 40% of Li⁺ show only a single narrow line in the ²³Na MAS NMR spectra attributed to mobile sodium cations. The populations of the different cation sites were determined from the relative line intensities of the MAS NMR spectra. Below about 70% Li⁺ exchange, lithium cations are located only on sites SI′ and SII. Between 70% and 100% Li⁺ content these sites are fully occupied by Li⁺, and the population of site SIII by Li⁺ increases. It was found that the nitrogen-adsorption capacity correlates well with the occupation of Li⁺ at site SIII.     

Determination of unsaturated fatty acid composition by high-resolution nuclear magnetic resonance spectroscopy

High-resolution nuclear magnetic resonance (NMR) spectroscopy provides useful data for analyzing fatty acid compositions of edible vegetable oils. Quantitation of each fatty acid was carried out by evaluation of particular peaks. According to the ¹H NMR method, terminal methyl protons, divinyl protons, and allyl protons are useful to calculate linolenic acid, linoleic acid, and oleic acid, respectively. The ω-2 carbon, divinyl carbon, and allylic carbons were used for calculation of these acids by the ¹³C NMR method. Compositional results obtained by NMR coincided well with those of the conventional gas chromatography (GC) method. Results from ¹³C NMR were in better agreement with those from GC than were the results obtained by the ¹H NMR method.     

CP/MAS C NMR analysis of the structure and hydrogen bonding of melt-crystallized poly(vinyl alcohol) films

The structure and hydrogen bonding of the melt-crystallized atactic poly(vinyl alcohol) (A-PVA) films, which were carefully prepared without significant thermal degradation, have been characterized by CP/MAS ¹³C NMR spectroscopy. The ¹³C spin-lattice relaxation analysis has revealed that there exist three components with different T_1C values, the crystalline, less mobile noncrystalline and mobile noncrystalline components, in good accord with the results for different PVA samples previously reported. It should be noted that the T_1C values of the crystalline and noncrystalline components are appreciably smaller for the melt-crystallized films than those for the un-annealed and annealed samples prepared by casting from the aqueous solution. The ¹³C NMR spectra of the crystalline and noncrystalline components are separately recorded by using the difference in T_1C and their CH lines are successfully resolved into three and seven constituent lines by the least-squares curve fitting, respectively. Moreover, the statistical analysis of the integrated intensities of the constituent lines thus obtained enables to determine the probability f_a for the formation of intramolecular hydrogen bonding in the successive two OH groups along each chain and another probability f_t of the trans conformation for the crystalline and noncrystalline components. It is found that the f_a value is relatively larger for the melt-crystallized films than those for the un-annealed and annealed samples. On the basis of these results, the features of the melt-crystallization and the resulting crystalline-noncrystalline structure are discussed by particularly considering effects of intra- and inter-molecular hydrogen bonding on the crystallization.     

Phosphitylation and quantitative P NMR analysis of partially substituted biodiesel glycerols

The main step during biodiesel production is the catalytic transesterification of triglycerides. Glycerol and fatty acids are by-products of the biodiesel production and considered as contaminants in the final product. By selectively measuring the amount of fatty acids and glycerol with different substitution levels, the yield of this step and the quality of the final biodiesel can be determined.This study examines the application of phosphitylation of glycerol hydroxyl groups with 2-chloro-4,4,5,5-tetramethyl-1,3,2-dioxaphospholane followed by ³¹P NMR analysis to provide a rapid quantitative analytical technique for the determination of substitution patterns on partially esterified glycerols, alcohols and the detection of fatty acids. ³¹P NMR chemical shift data was established with a series mono and di-substituted esters of glycerol, fatty acids and alcohols, then utilized to characterize commercial glycerol and biodiesel samples.     

Sequence analysis of poly(ethylene/1,4-cyclohexanedimethylene terephthalate) copolymer using H and C NMR

The triad-level sequence analysis of poly(ethylene/1,4-cyclohexanedimethylene terephthalate) copolymer was reported in a solvent system of o-chlorophenol/deuterated chloroform mixture (50/50 v/v) at 80 °C using 600 MHz ¹H NMR. The well-resolved alcoholic CH₂ proton peak of the glycol units was observed, which made the detailed sequence analysis possible. The peaks of the cis- and trans-forms of the 1,4-cyclohexanedimethylene glycol units were split into the triad sequence in the chain and could be assigned by a comparison of the spectra with those of homopolymers and by an additional two-dimensional heteronuclear multiple bond correlation observation. The triad sequence distributions centered on 1,4-cyclohexanedimethylene glycol units were determined, which was independent of the cis- and trans-forms of the units and controlled according to Bernoullian statistics.     

Rapid determination of iodine value by 1H nuclear magnetic resonance spectroscopy

High-resolution ¹H nuclear magnetic resonance (¹H NMR) has been found to be an effective tool for the direct, rapid, and automated determination of the iodine value (IV) of vegetable oils, including hydrogenated oils (IV=45.9–140.2). The total time required to obtain the ¹H NMR data is about 3 min per sample. The IV is calculated from the number of double-bonded protons and the average molecular weight derived directly from the spectrum. The average of olefinic protons and allylic plus divinyl protons area was used to calculate the absolute number of double-bonded protons. The ¹H NMR results were compared with those obtained by the traditional Wijs-cyclohexane methods. The correlation coefficient between traditional IV and the novel ¹H NMR method was r ²=0.9994 for the regression equation Y=0.9885X + 2.8084, where X was the result given by the traditional method. With the proposed regression equation, IV calculated by the ¹H NMR method was within an error of ± 1 unit of the result obtained by the traditional method. The proposed method is practically viable if one can afford to have the NMR system.     

Use of 13C nuclear magnetic resonance distortionless enhancement by polarization transfer pulse sequence and multivariate analysis to discriminate olive oil cultivars

Distortionless enhancement by polarization transfer (DEPT) pulse sequence was used to set up a quantitative high-resolution ¹³C nuclear magnetic resonance (NMR) method to discriminate olive oils by cultivars and geographical origin. DEPT pulse sequence enhances the intensity of NMR signals from nuclei of low magnetogyric ratio. The nuclear spin polarization is transferred from spins with large Boltzmann population differences (usually protons) to nuclear species characterized by low Boltzmann factors, e.g., ¹³C. The signal enhancement of ¹³C spectra ensures the accuracy of resonance integration, which is a major task when the resonance intensities of different spectra must be compared. The resonances of triglyceride acyl chains C _n:0, C_18:1, C_18:2, and C_18:3, were also assigned. Multivariate analysis was carried out on the 35 carbon signals obtained. By using variable reduction techniques, coupled with standard statistical methods—partial least squares and principal components analysis—it was largely possible to separate the samples according to their variety and region of origin. With one problem variety removed, 100% prediction of the three remaining varieties was achieved. Similarly, by using the three regions with greatest representation in the data, all but one of a test set of 34 samples were correctly predicted. Thus, the composition of olive oils from different cultivars and of different geographical origin were compared and successfully studied by multivariate analysis. These considerations in conjunction with the structural elucidations of triglyceride molecules demonstrated that ¹³C NMR is among the most powerful techniques yet described for analysis of olive oils.