统计抽样检验保证产品的质量水平

本文介绍了统计抽样检验,重点阐述了统计抽样检验如何科学地保证产品的质量水平.     

统计抽样检验的质量控制与管理

该文简单介绍了统计抽样检验以及存在的风险,重点阐述了如何对统计抽样检验过程进行质量控制与管理,以确保产品的质量水平.     

最新标准简介

GB/T 2828.1-2003《计数抽样检验程序第1部分:按接收质量限(AQL)检索的逐批检验抽样计划》 代替GB/T 2828-1987 GB/T 2828.1-2003是等同采用国际标准ISO 2859-1:1999《计数抽样检验程序第1部分:按接收质量(AQL)检索的逐批检验抽样计划》对GB/T 2828-1987的修订。     

AQL、LTPD以及“零缺陷”三种抽样检验的比较

抽样检验按照检验值的属性可以划分为计量抽样检验和计数抽样检验,而计数抽样检验又包括一次、二次以及多次抽样方案。文章主要介绍了计数型抽样检验中一次抽样方案的基本概念、抽样原理、表征参数、OC函数、OC曲线以及抽样方案辨别力指标。在此基础上,重点介绍了AQL抽样、LDPT抽样以及"零缺陷"抽样三种抽样检验方法的基本构架和检验流程。通过对三种抽样检验方法的分析对比,零缺陷抽样凭借其抽样方法简便、抽样方案经济、质量理念先进的特点,已经逐渐成为现代企业质量检验管理的潮流所向。     

GB/T 2828.1-2003应用于专利电子申请受理审查质量研究

介绍了专利电子申请受理审查质量检验现状,提出将国标GB/T?2828.1应用于专利电子申请受理审查质量抽样检验的概念和思路,并阐述了该检验方案的应用案例,旨在提供更科学合理的检验方法,切实降低检验费用,为提高专利电子申请受理审查质量水平提供参考。     

如何正确应用统计抽样检验

文章简单介绍了统计抽样检验，重点阐述了如何应用统计抽样检验保证产品的质量水平、分析存在的风险，并给出不合格品处理方法。     

计数抽样检验方案的设计与应用

介绍了计数抽样的基本知识，并分析了ＧＪＢ１７９－８６对Ｊ８０轴承体交验所制定的计数抽样检验方案。     

两种抽样检验标准的应用比较

本文介绍了两种抽样检验标准的特点、区别及其应用范围.     

"抽样检验"国家标准的发展概况

抽样检验是质量管理工作的重要组成部分，它是以“用尽量少的样本量来尽量准确地评判总体(批)”为主线展开的。本文围绕这条主线，对不同形式的产品、不同的组批方式论述了不同的抽样方案及作用。     

干扰电平计量抽样方案及测量结果的统计评定（上）

本文在简单介绍抽样检验的一般概念和一些与计量抽样有关的数理统计学基本原理的基础上，根据小样本抽样具有非中心ｔ分布（ｎｏｎ－ｃｅｎｔｒａｌｔ－ｄｉｓ－ｔｒｉｂｕｔｉｏｎ）特性，用显著性检验法系统地推导出干扰电平的一次计量抽样方案（ｎ，Ｋ）和抽样特性β（ｐ）从而论述了ＣＩＳＰＲ推荐的８０％／８０％的干扰电平计量抽样检验规则的统计意义，并以二则实例说明，如何应用制定准则＾－Ｘ＋ＫＳｎ≤Ｌ，对抽检的测量结     

Novel fiber-optical interferometer with miniaturized probe for in-hole measurements

Today, micro-system technology and the development of new MEMS （Micro-Electro-Mechanical Systems） are emerging rapidly. In order for this development to become a success in the long run, measurement systems have to ensure product quality. Most often, MEMS have to be tested by means of functionality or destructive tests. One reason for this is that there are no suitable systems or sensing probes available which can be used for the measurement of quasi inaccessible features like small holes or cavities. We present a measurement system that could be used for these kinds of measurements. The system combines a fiber optical, miniaturized sensing probe with low-coherence interferometry, so that absolute distance measurements with nanometer accuracy are possible.     

Theoretical analysis of the relationship between the Brillouin gain coefficient and the strain in the optical-fiber sensors

The relation between the power of the Brillouin signal and the strain is one of the bases of the distributed fiber sensors of temperature and strain. The coefficient of the Bfillouin gain can be changed by the temperature and the strain that will affect the power of the Brillouin scattering. The relation between the change of the Brillouin gain coefficient and the strain is thought to be linear by many researchers. However, it is not always linear based on the theoretical analysis and numerical simulation. Therefore, errors will be caused if the relation between the change of the Brillouin gain coefficient and the strain is regarded as to be linear approximately for measuring the temperature and the strain. For this reason, the influence of the parameters on the Brillouin gain coefficient is proposed through theoretical analysis and numerical simulation.     

Towards Mobile Ubiquitous Service Environment

In this article we present a perspective on future vision of mobile communications and services which is referred to as Mobile Ubiquitous Service Environment (MUSE). Based on analysis of wireless communications and services, we exploit a conceptual model for MUSE via a top-down approach. The conceptual model consists of three major elements: Terminal Service Environment (TSE), Network Service Environment (NSE) and User Identity (UID). The concept of Always the Best Experience (ABE) is addressed as the hinge in design and development such that the user-centric services could be provided automatically and intelligently in the future diverse wireless world Based on these, we further discuss the issues on design and implementation of architecture of future wireless communication system. Requirements for architecture brought by the new features of MUSE are listed. Moreover, we also address several tradeoffs that should be taken into consideration in design. Finally, the deployment challenges for MUSE, such as reflectiveness of system, security and privacy, as well as peer-to-peer AAA are predicted.Ji Yang received PhD degree on Circuit and System, Bachelor degree on Telecommunication Engineering from Beijing University of Posts and Telecommunications (BUPT) in 2002 and 1993 respectively. Currently, he is an associate professor of BUPT, chief technical supervisor of Wireless Technology Innovation Institute, and vice manager of MTlab of Sino-Germany Software Institute. He leads the research on service and application in Future Forum in China. He also made much contribution to the China Communication Standardization Association (CCSA), including the vision of future Mobile Ubiquitous Service Environment, architecture of future B3G mobile terminal, etc. His research interests include architecture design for mobile ubiquitous networks, theory of self-organization, etc.Zhang Ping is now the professor of Beijing University of Posts and Telecommunications and director of Wireless Technology Innovation (WTI) Institute, BUPT. He has also served on the senior member of C3G Group, China MOST 863 future mobile communication FuTURE project, vice-chairman of China FuTURE Forum, and member of Vision Committee of World Wireless Research Forum(WWRF), he was vice chair of WWRF in 2005. He is also invited as the consultants for many domestic and oversea communication companies. He is very active on the international research activity on Beyond 3G area. He also participated in several European projects such as E2R and MOCCA. Until now, he has published 6 books, around 400 publications in journals and conferences in the area of telecommunications. His main research interests are theory and applications in wireless communication area. He was awarded by government, city of Beijing and Ministry of Information Industry several times for his great contribution to the industry and research activity in China.Hu Zheng is a PH.D candidate in mobile communications engineering in Wireless Technology Innovation Institute (WTI) at Beijing University of Posts and Telecommunications (BUPT). He received B.S degree from Nanjing University of Posts and Telecommunications in 2002, majoring in computer communications engineering. He currently works on serivce aspects of mobile ubiquitous communication system with focus on design and performance evaluation of interaction protocols and services in self-organized service environment.Wang Xu received the B.Tech. degree in electronic engineering from Beijing Polytechnic University (now named as Beijing University of Technology), Beijing, China, in 2002. Now he is working for his Ph.D. degree in Wireless Technology Innovation (WTI) Institute, Beijing University of Posts and Telecommunications (BUPT). His current interests include wireless communications in personal area, ad hoc networks and peer-to-peer system.Li Yinong received the BS degree major in Telecommunication Engineering in 1993 from Beijing University of Posts and Telecommunications, the MS degree and PhD degree major in Telecommunication and Electronic System in 1995 and 2003 from the Beijing University of Posts and Telecommunications. He is currently a lecture of STE (School of Telecommunication Engineering) of BUPT. His main research interests include service modeling, service composition approach, and intelligent service. In BUPT, he has given several lectures to both graduate and undergraduate students such as Information Theory, Speech Recognition, Pattern Recognition and Artificial Intelligence.     

An improved parallel thinning algorithm with two subiterations

The parallel thinning algorithm with two subiterations is improved in this paper. By analyzing the notions of connected components and passes, a conclusion is drawn that the number of passes and the number of eight-connected components are equal. Then the expression of the number of eight-connected components is obtained which replaces the old one in the algorithm. And a reserving condition is proposed by experiments, which alleviates the excess deletion where a diagonal line and a beeline intersect. The experimental results demonstrate that the thinned curve is almost located in the middle of the original curve connectivelv with single pixel width and the processing speed is high.     

High Speed Curve Interpolating D/A Converter

This paper presents a design of high speed curve interpolating D/A converter. We improve 8-bit data to 12-bit data, so the data resolution increases 16 times than that of original 8-bit data. The curve interpolator is developed from the linear interpolator. The simulation speed curve interpolator is about 500 MHz. The chip is fabricated by 0.8 m double-metal single poly CMOS technology. The active interpolation size of chip is 1 × 1 mm². The power dissipation is 200 mWatts at 5volt and 500 MHz for simulation result and 80 mWatts at 5 volt and 50 MHz for measurement result. The errors of interpolating result of curve interpolators are about 20 times less than that of original signal.     

Status and Trends in Advanced SOI Devices and Materials

提供了一种用于安德鲁反射测量样品制备新方法. 该方法采用聚焦粒子束刻蚀和磁控溅射,可以获得可控的、干净的、无应力的纳米接触用于自旋极化探测. 所制备的样品中,磁性和非磁性材料样品的反射谱都表现出复杂的峰和谷结构,这些结构可能源于与界面相关的零偏压反常以及与激发态相关的准离子相互作用. 对另一个Co40Fe40B20合金样品采用简单的钕针尖压针方法进行了对比性测量,反射谱中没有观察到谷结构,但谱结构出现较明显的热扩展,这种热扩展可能来源于界面处的非弹性输运. 所有的反射谱目前还不能由现有的理论给出令人满意的解释. 利用点接触反射方法获得可靠的自旋极化信息还有赖于接触界面特征的进一步分析. 而一个更切合实际的、更完善的理论成为迫切的需要.     

Memory Performance Optimizations For Real-Time Software HDTV Decoding

Pure software HDTV video decoding is still a challenging task on entry-level to mid-range desktop and notebook PCs, even with today’s microprocessors frequency measured in GHz. This paper shows that the performance bottleneck in a software MPEG-2 decoder has been shifted to memory operations, as microprocessor technologies including multimedia instruction extensions have been improving at a fast rate during the past years.Our study exploits concurrencies at macroblock level to alleviate the performance bottleneck in a software MPEG-2 decoder. First, the paper introduces an interleaved block-order data layout to improve CPU cache performance. Second, the paper describes an algorithm to explicitly prefetch macroblocks for motion compensation. Finally, the paper presents an algorithm to schedule interleaved decoding and output at macroblock level. Our implementation and experiments show that these methods can effectively hide the latency of memory and frame buffer. The optimizations improve the performance of a multimedia-instruction-optimized software MPEG-2 decoder by a factor of about two. On a PC with a 933 MHz Pentium III CPU, the decoder can decode and display 1280 × 720-resolution HDTV streams at over 62 frames per second.This work was done while the author was a Ph.D. candidate in the Computer ScienceHan Chen is a research staff member in IBM T.J. Watson Research Center. His research interests include distributed computing systems, scalable display system, and multimedia. He received his Ph.D. degree in 2003 and his M.A. degree in 1999 from Princeton University. He received his B.S. degree from Tsinghua University of Beijing, China in 1997.Kai Li is a Charles Fitzmorris professor at the Computer Science Department of Princeton University. His research interests include operating systems, computer architecture, distributed systems, and scalable display systems. He received his Ph.D. degree from Yale University in 1986. Prior to that, he received his M.S. degree from University of Science and Technology of China, Academy of Sciences of China in 1981 and a B.S. degree from Jilin University in China in 1977. He was a visiting faculty member at University of Toronto in 1988 and a visiting professor at Stanford University during his sabbaticals in 1996 and 2000. He has served on dozens of program committees and served as chair or vice chair several times. He has been elected as an ACM fellow in 1998.Bin Wei received a Ph.D. in Computer Science from Princeton University in 1998 and joined the research community at AT&T Shannon Laboratories since then. His research interests are in the areas of high-performance computer systems, multimedia, and service platforms for mobile users. He received a BS in Computer Science from Tianjin University, China in 1983 and an MS in Computer Science from the Institute of Computing Technology, Chinese Academy of Sciences, in 1989.     

一个具有附益性及保序性算子的形态学非局部拓展

近年，形态学非局部拓展工作在图像处理领域受到众多关注.而附益性算子是经典形态学的最基本形式，也是形态学分析方法最重要的变换工具.为此，一些研究者就形态学非局部拓展中如何保持算子的附益性开展工作.本文从理论及实例两个方面说明，相关拓展工作为保持算子的附益性而丢失了保序性的不足；进一步，通过设计非局部权值的获取过程，并结合现有工作，本文提出了一个新的形态学非局部拓展，并定理证明了所得算子同时具备附益性及保序性两个重要性质；人工合成图像及自然图像上的仿真实验也表明了本文所提算法的有效性.     

Energy-efficient resource allocation model for device-to-device communication in 5G wireless personal area networks

In general, there are several many devices that can overload the network and reduce performance. Devices can minimize interference and optimize bandwidth usage by using directional antennas and by avoiding overlapping communication ranges. In addition, devices need to carefully manage their use of resources, such as bandwidth and energy. Bandwidth is limited in wireless personal area networks (WPANs), so devices need to carefully select which data to send and receive. In this paper, an intelligent performance analysis of energy-efficient resource optimization model has been proposed for device-to-device (D2D) communication in fifth-generation (5G) WPAN. The proposed energy-efficient resource allocation in D2D communication is important because it helps reduce energy consumption and extend the lifespan of devices that are communicating with each other. By allocating resources in an efficient manner, communication between two devices can be optimized for maximum efficiency. This helps reduce the amount of energy needed to power the communication, as well as the amount of energy needed to power the device that is communicating with another device. Additionally, efficient resource allocation helps reduce the overall cost of communication, as the use of fewer resources results in a lower overall cost. The proposed efficient resource allocation helps reduce the environmental impact of communication, as less energy is used for communication. The proposed energy-efficient resource allocation model (EERAM) has reached 92.97% of energy allocation, 88.72% of power allocation, 87.79% of bandwidth allocation, 87.93% of spectrum allocation, 88.43% of channel allocation, 25.47% of end-to-end delay, 94.33% of network data speed, and 90.99% of network throughput.     

基于WDM的设备驱动程序设计和实现

设备驱动程序是硬件设备连接到计算机系统的软件接口。Windows驱动程序模型(WDM)是Windows平台的新一代设备驱动程序模型,WDM的研究对设计优良设备驱动程序有重要指导作用。文章分析WDM的工作原理和机制,着重介绍WDM设备驱动程序的设计和实现方法,并给出一个通用串行总线(USB)设备驱动程序的设计实例。该设计将USB驱动程序分为即插即用(PnP)、电源管理、USB初始化和USB设备输入/输出(I/O)等功能模块,具有结构清晰、易移植、复用性好等优点,在USB驱动程序设计中具有良好的应用价值。