共查询到20条相似文献,搜索用时 109 毫秒
1.
为了更佳的发挥板式换热器高效传热的特点,基于传热学理论,研究了准则方程的几种建立方法,同时,结合板式换热器的一种选型计算过程,深入的分析了板式换热器准则方程的应用,通过分析表明,努赛尔方程在板式换热器的传热系数的计算中起到决定性因素,而通过欧拉方程则可以计算出板式换热器在不同工况下的压力降,因此,建立准则方程对板式换热器的选型、计算及应用等方面都具有非常重要的意义。 相似文献
2.
3.
板式换热器作为一种高效换热器正在得到越来越多的应用,但是其相变对流传热的机理和影响因素却非常复杂,因此精准设计板式相变换热器一直是一个难题。本文总结了板式换热器凝结换热、沸腾换热这两种主要相变对流传热过程的特点,概述了近年来国内外在板式换热器相变换热理论分析、数值模拟、实验测试等方面的最新研究进展,列出了部分已发表的实验关联式及其应用条件,重点论述了这些实验关联式中状态参数对板式换热器相变传热系数和流道压降的影响,对比分析了部分实验关联式的计算结果,对某些不同结论也作了评述。此外,本文还介绍了计算机模拟仿真技术在该领域研究中的应用情况。最后,指出了当前板式换热器相变传热研究中存在的主要问题和未来需要努力的重点发展方向。 相似文献
4.
5.
应用VB软件开发螺旋板式换热器强度计算系统,可解决螺旋板式换热器的几何计算、强度计算及稳定性设计工作需要人员多、花费时间长、易错易漏、滞后等问题,极大提高螺旋板式换热器设计计算的准确性和工作效率。 相似文献
6.
板式换热器在工业生产中广泛应用。基于换热器(火积)耗散热阻理论,采用数值模拟和实验相结合的方法对新型蜂窝板式换热器进行研究。结果表明数值模拟和实验结果在合理的误差范围内,验证了数值模拟的可靠性。新型板式换热器内部蜂窝结构附近的速度场出现规律的周期性变化,流体湍流强度增加,提高了换热效率。新型板式换热器换热量与其(火积)耗散和(火积)耗散热阻呈反比例关系,这为新型蜂窝板式换热器的优化提供了理论依据,并为工业生产提供参考。 相似文献
7.
8.
本文通过对不带膨胀节的固定管板式换热器管板强度的理论分析和实例计算,说明了壳程圆筒和换热管的材料性质对换热管轴向应力的影响,并根据此提出了在对不带膨胀节的固定管板式换热器进行强度设计时关于壳程圆筒与换热管材料匹配的几点建议。 相似文献
9.
10.
11.
氟塑料-石墨板式换热器在铝溶胶生产中的应用 总被引:1,自引:0,他引:1
介绍了氟塑料 石墨板式换热器在铝溶胶生产中的选择和应用。并与其他类型换热器作了对比,它具有强耐腐蚀性和高效换热性及密封性等优越性,使得换热器使用寿命显著提高 相似文献
12.
13.
针对铝溶胶生产过程中苛刻的工艺条件 ,选用Hastelloy合金板式换热器 ,并对其结构特点和使用效果进行阐述 相似文献
14.
简述了H-276(钛材)板式换热器的传热机理和耐腐蚀性能,并与碳钢换热器在VDC氯化生产中的应用情况进行了比较。实践表明H-276板式换热器在该工况中的使用效果明显。 相似文献
15.
Detlev Ringer 《化学,工程师,技术》1991,63(1):30-37
Multi-flow heat exchangers as soldered aluminium plate equipment – State of the art. Soldered aluminium plate heat exchangers are the most frequently used pieces of equipment for heat exchange between clean fluids in cryogenic and low temperature processes. Equipment of this type combines high flexibility in the flow arrangement, high heating surface densities (up to 1400 m2/m3), low pressure drops, and low production costs. This article provides a survey of the present state of the art of their manufacture and thermal dimensioning. In conclusion, new developments are treated. 相似文献
16.
Heating and cooling-chemical engineering aspects. This paper reviews the commonest types of heat exchangers and their applications. They are classified in the following types: tube bundle heat exchangers, plate heat exchangers, spiral heat exchangers, lamella heat exchangers, and heat exchangers for special purposes. Most of these apparatus can be used for heat exchange between single phases or for condensation or boiling of substances. The different criteria determining the choice of heat exchanger are explained. 相似文献
17.
18.
19.
20.
Thermal models of plate heat exchangers rely on correlations for the evaluation of the convective heat transfer coefficients inside the channels. It is usual to configure the exchanger with one countercurrent single-pass arrangement for acquiring heat transfer experimental data. This type of configuration approaches the ideal case of pure countercurrent flow conditions, and therefore a simplified mathematical model can be used for parameter estimation. However, it is known that the results of parameter estimation depend on the selected exchanger configuration because the effects of flow maldistribution inside its channels are incorporated into the heat transfer coefficients. This work presents a parameter estimation procedure for plate heat exchangers that handles experimental data from multiple configurations. The procedure is tested with an Armfield FT-43 heat exchanger with flat plates and the parameter estimation results are compared to those obtained from the usual method of single-pass arrangements. It can be observed that the heat transfer correlations obtained for plate heat exchangers are intimately associated with the configuration(s) experimentally tested and the corresponding flow distribution pattern(s). 相似文献