碱性离子液体催化大豆油制备生物柴油

以大豆油为原料,碱性离子液体为催化剂,制备生物柴油,研究反应温度、醇油摩尔比、反应时间和碱性离子液体的用量对生物柴油产率的影响。结果表明,碱性离子液体催化大豆油制备生物柴油的最佳工艺条件是:n(甲醇)∶n(大豆油)=12∶1,反应温度55℃,反应时间1.5 h,离子液体用量2.5%。在该工艺条件下,生物柴油产率41.3%。     

碱性离子液体催化大豆油制备生物柴油

以大豆油为原料,碱性离子液体为催化剂,制备生物柴油,研究反应温度、醇油摩尔比、反应时间和碱性离子液体的用量对生物柴油产率的影响。结果表明,碱性离子液体催化大豆油制备生物柴油的最佳工艺条件是:n(甲醇)∶n(大豆油)=12∶1,反应温度55℃,反应时间1.5 h,离子液体用量2.5%。在该工艺条件下,生物柴油产率41.3%。     

Na/SiO2新型固体碱催化制备生物柴油的研究

以NaOH、正硅酸乙酯和乙醇为原料,经溶胶-凝胶法制备新型固体碱催化剂（Na/SiO₂）,用于催化大豆油与甲醇的酯交换反应制备生物柴油,研究催化剂焙烧温度、n(NaOH)∶n(SiO₂)、n(甲醇)∶n(大豆油)、催化剂用量和反应时间对产率的影响以及催化剂的稳定性。结果表明,固体碱催化剂Na/SiO₂在大豆油与甲醇的酯交换反应中具有较高的催化活性,在催化剂焙烧温度600 ℃、n(NaOH)∶n(SiO₂)=2∶1、n(甲醇)∶n(大豆油)=15∶1、催化剂用量为大豆油质量的7%和反应时间3 h的条件下,脂肪酸甲酯产率可达97.42%,催化剂在稳定性试验中呈现出优良的稳定性。     

Na_2CO_3/MCM-41型固体碱催化制备生物柴油

以MCM-41为载体负载Na2CO3制备Na2CO3/MCM-41型酯交换催化剂,用于催化大豆油制备生物柴油。并研究了催化剂用量、反应物的摩尔比、反应温度和反应时间等因素对该反应的影响。结果表明,最佳反应条件是n(甲醇)∶n(大豆油)=16∶1,催化剂用量为大豆油质量的3%,反应温度为60℃,反应时间为3 h条件下,酯交换转化率可达35%以上。     

负载型固体碱催化合成甲酯生物柴油的研究

采用浸渍法制备了Na2CO3/高岭土负载型固体碱催化剂,用于催化大豆油与甲醇酯交换反应制备甲酯生物柴油。考察了反应时间、催化剂用量、反应温度和醇油摩尔比对酯交换反应转化率的影响,并通过单因素试验确定了最优工艺条件。结果表明:反应时间4 h、反应温度60℃、催化剂用量3%和醇油摩尔比12∶1条件下,酯交换反应转化率达到90.5%。     

废旧光盘在离子液体中的甲醇醇解反应

以离子液体［Bmim］［Cl］为反应介质和催化剂,对废旧光盘的甲醇醇解反应进行了研究。考察了反应温度、反应时间、催化剂用量、甲醇用量对醇解反应结果的影响,得到的较佳醇解反应条件为反应温度110℃,反应时间1.5 h,n(甲醇)∶n(光盘)=8∶1,m(［Bmim］［Cl］)∶m(光盘)=1∶1,在上述条件下,光盘醇解率≥98%,双酚A收率≥93%。对离子液体的回用性能进行了考察,结果表明,离子液体回用8次后光盘的醇解率和BPA的收率无明显变化。采用FT-IR技术对醇解产物进行了表征。     

分段醇解均相缩合生产聚乙烯醇缩丁醛

以聚醋酸乙烯(PVAc)和丁醛为原料,采用分段醇解-缩合均相法生产聚乙烯醇缩丁醛(PVB)。系统讨论了反应温度、催化剂用量和物料配比等因素对醇解反应和缩合反应的影响。结果表明:醇解反应较适宜的工艺条件为w(PVAc)=20%(相对于甲醇质量而言),n(NaOH)∶n(PVAc)=0.005∶1,反应温度40℃;缩醛化反应较适宜的工艺条件为m(HCl)∶m[聚乙烯醇(PVA)]=0.3∶1,n(丁醛)∶n(羟基)=1.1∶2,缩醛化反应温度50℃。各阶段最佳反应时间为第一阶段醇解15 min,缩合45 min;第二阶段醇解30 min,缩合60 min;第三阶段醇解50 min,缩合90 min。在最佳工艺条件下生产的PVB,其缩醛基分布均匀,并且其w(缩醛基)≈75%(相对于PVB质量而言)。     

介孔分子筛负载HPWA催化合成生物柴油

制备了介孔磷钨杂多酸催化剂HPWA/SBA-15,用XRD、FTIR和BET等方法进行表征,并用于催化大豆油酯交换反应制备生物柴油。结果表明,介孔磷钨杂多酸催化剂具有较好的催化性能,其催化性能与介孔杂多酸催化剂优良的扩散性能和均一的质子酸特性有关,在活性组分负载质量分数为35%、反应温度190℃、反应时间7 h、n(醇)∶n(油)为16∶1和催化剂用量为大豆油质量的5%条件下,生物柴油收率可达97%。     

正交实验法优选K_2O/CaO-SBA-15催化生产生物柴油工艺条件

以介孔分子筛SBA-15为载体,通过浸渍法制备固体碱催化剂K2O-SBA-15、CaO-SBA-15和K2O/CaO-SBA-15,并对其进行XRD表征。将制备的催化剂用于催化大豆油和无水甲醇制备生物柴油。按四因素三水平的正交实验设计方案进行实验,表明各因素影响程度依次为:反应时间反应温度油醇物质的量比催化剂用量。最佳反应条件:在温度为60℃时加入n(原料油)∶n(甲醇)=12∶1的反应物,加入m(催化剂)∶m(原料油)=3%的催化剂,反应3h,产率达86.97%。     

碱催化法制备生物柴油工艺研究

在250m l间歇式高压反应器中,以大豆油为原料,研究KOH催化甲醇酯交换反应制备生物柴油的工艺条件。主要考察了醇油摩尔比、反应温度、反应时间、催化剂用量等操作条件对脂肪酸甲酯转化率的影响。结果表明,当KOH用量为1%(wt),醇油摩尔比为5∶1,反应温度为65℃时,反应时间为15m in,脂肪酸甲酯的转化率可以达到92%。     

Insect antifeedant properties of anthranoids from the genusVismia

Vismiones and ferruginins, representatives of a new class of lypophilic anthranoids from the genusVismia were found to inhibit feeding in larvae of species ofSpodoptera, Heliothis, and inLocusta migratoria.     

Direct observation of freeze-thaw instability of latex coatings via high pressure freezing and cryogenic SEM

Despite its industrial importance, the subject of freeze-thaw (F/T) stability of latex coatings has not been studied extensively. There is also a lack of fundamental understanding about the process and the mechanisms through which a coating becomes destabilized. High pressure (2100 bar) freezing fixes the state of water-suspended particles of polymer binder and inorganic pigments without the growth of ice crystals during freezing that produce artifacts in direct imaging scanning electron microscopy (SEM) of fracture surfaces of frozen coatings. We show that by incorporating copolymerizable functional monomers, it is possible to achieve F/T stability in polymer latexes and in low-VOC paints, as judged by the microstructures revealed by the cryogenic SEM technique. Particle coalescence as well as pigment segregation in F/T unstable systems are visualized. In order to achieve F/T stability in paints, latex particles must not flocculate and should provide protection to inorganic pigment and extender particles. Because of the unique capabilities of the cryogenic SEM, we are able to separate the effects of freezing and thawing, and study the influence of the rate of freezing and thawing on F/T stability. Destabilization can be caused by either freezing or thawing. A slow freezing process is more detrimental to F/T stability than a fast freezing process; the latter actually preserves suspension stability during freezing. Presented at the 82nd Annual Meeting of the Federation of Societies for Coatings Technology, October 27–29, 2004 in Chicago, IL. Tied for first place in The John A. Gordon Best Paper Competition.     

Ethanol and (−)-α-Pinene: Attractant Kairomones for Bark and Ambrosia Beetles in the Southeastern US

In 2002–2004, we examined the flight responses of 49 species of native and exotic bark and ambrosia beetles (Coleoptera: Scolytidae and Platypodidae) to traps baited with ethanol and/or (−)-α-pinene in the southeastern US. Eight field trials were conducted in mature pine stands in Alabama, Florida, Georgia, North Carolina, and South Carolina. Funnel traps baited with ethanol lures (release rate, about 0.6 g/day at 25–28°C) were attractive to ten species of ambrosia beetles (Ambrosiodmus tachygraphus, Anisandrus sayi, Dryoxylon onoharaensum, Monarthrum mali, Xyleborinus saxesenii, Xyleborus affinis, Xyleborus ferrugineus, Xylosandrus compactus, Xylosandrus crassiusculus, and Xylosandrus germanus) and two species of bark beetles (Cryptocarenus heveae and Hypothenemus sp.). Traps baited with (−)-α-pinene lures (release rate, 2–6 g/day at 25–28°C) were attractive to five bark beetle species (Dendroctonus terebrans, Hylastes porculus, Hylastes salebrosus, Hylastes tenuis, and Ips grandicollis) and one platypodid ambrosia beetle species (Myoplatypus flavicornis). Ethanol enhanced responses of some species (Xyleborus pubescens, H. porculus, H. salebrosus, H. tenuis, and Pityophthorus cariniceps) to traps baited with (−)-α-pinene in some locations. (−)-α-Pinene interrupted the response of some ambrosia beetle species to traps baited with ethanol, but only the response of D. onoharaensum was interrupted consistently at most locations. Of 23 species of ambrosia beetles captured in our field trials, nine were exotic and accounted for 70–97% of total catches of ambrosia beetles. Our results provide support for the continued use of separate traps baited with ethanol alone and ethanol with (−)-α-pinene to detect and monitor common bark and ambrosia beetles from the southeastern region of the US.     

Methyl 2,4,6-decatrienoates Attract Stink Bugs and Tachinid Parasitoids

Halyomorpha halys (Stål) (Pentatomidae), called the brown marmorated stink bug (BMSB), is a newly invasive species in the eastern USA that is rapidly spreading from the original point of establishment in Allentown, PA. In its native range, the BMSB is reportedly attracted to methyl (E,E,Z)-2,4,6-decatrienoate, the male-produced pheromone of another pentatomid common in eastern Asia, Plautia stali Scott. In North America, Thyanta spp. are the only pentatomids known to produce methyl 2,4,6-decatrienoate [the (E,Z,Z)-isomer] as part of their pheromones. Methyl 2,4,6-decatrienoates were field-tested in Maryland to monitor the spread of the BMSB and to explore the possibility that Thyanta spp. are an alternate host for parasitic tachinid flies that use stink bug pheromones as host-finding kairomones. Here we report the first captures of adult and nymph BMSBs in traps baited with methyl (E,E,Z)-2,4,6-decatrienoate in central Maryland and present data verifying that the tachinid, Euclytia flava (Townsend), exploits methyl (E,Z,Z)-2,4,6-decatrienoate as a kairomone. We also report the unexpected finding that various isomers of methyl 2,4,6-decatrienoate attract Acrosternum hilare (Say), although this bug apparently does not produce methyl decatrienoates. Other stink bugs and tachinids native to North America were also attracted to methyl 2,4,6-decatrienoates. These data indicate there are Heteroptera in North America in addition to Thyanta spp. that probably use methyl 2,4,6-decatrienoates as pheromones. The evidence that some pentatomids exploit the pheromones of other true bugs as kairomones to find food or to congregate as a passive defense against tachinid parasitism is discussed.     

2007～2008年世界塑料工业进展

收集了2007年7月～2008年6月世界塑料工业的相关资料,介绍了2007～2008年国外塑料工业的发展情况,提供了世界塑料产量、消费量及全球各类树脂的需求量及产能情况.按通用热塑性树脂(聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂)、工程塑料(尼龙、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚)、特种工程塑料(聚苯·硫醚、液晶聚合物、聚醚醚酮)、通用热固性树脂(酚醛、聚氨酯、不饱和聚酯树脂、环氧树脂)不同品种的顺序,对树脂的产量、消费量、供需状况及合成工艺、产品应用开发、树脂品种的延伸及应用的进一步扩展等技术作了详细介绍.     

2005～2006年国外塑料工业进展

收集了2005年7月～2006年6月国外塑料工业的相关资料,介绍了2005—2006年国外塑料工业的发展情况。提供了世界塑料产量、消费量及全球各类树脂生产量以及各国塑料制品的进出口情况。作为对比,介绍了中国塑料的生产情况。按通用热塑性树脂（聚乙烯、聚丙烯、聚苯乙烯、聚氯乙烯、ABS树脂）、工程塑料（聚酰胺、聚碳酸酯、聚甲醛、热塑性聚酯、聚苯醚）、通用热固性树脂（酚醛、聚氨酯、不饱和树脂、环氧树脂）、特种工程塑料（聚苯硫醚、液晶聚合物、聚醚醚酮）的品种顺序,对树脂的产量、消费量、供需状况及合成工艺、产品开发、树脂品种的延伸及应用的扩展作了详细的介绍。