Influence of excitation wavelengths on luminescent properties of Sr3Al2O6:Eu, Dy phosphors prepared by sol-gel-combustion processing

Eu²⁺ and Dy³⁺ ion co-doped Sr₃Al₂O₆ red-emitting long afterglow phosphor was synthesized by sol-gel-combustion methods using Sr(NO₃)₂, Al(NO₃)₃·9H₂O, Eu₂O₃, Dy₂O₃, H₃BO₃ and C₆H₈O₇·H₂O as raw materials. The crystalline structure of the phosphors were characterized by X-ray diffraction, luminescent properties of phosphors were analyzed by fluorescence spectrophotometer. The effect of excitation wavelengths on the luminescent properties of Sr₃Al₂O₆:Eu²⁺, Dy³⁺ phosphors was discussed. The emission peak of Sr₃Al₂O₆:Eu²⁺, Dy³⁺ phosphor lays at 516 nm under the excitation of 360 nm, and at 612 nm under the excitation of 468 nm. The results reveal that the Sr₃Al₂O₆:Eu²⁺, Dy³⁺ phosphor will emit a yellow-green light upon UV illumination, and a bright red light upon visible light illumination. The emission mechanism was discussed according to the effect of nephelauxetic and crystal field on the 4f⁶5d¹ → 4f⁷ transition of the Eu²⁺ ions in Sr₃Al₂O₆. The afterglow time of (Sr_0.94Eu_0.03Dy_0.03)₃ Al₂O₆ phosphors lasts for over 600s after the excited source was cut off.     

Influence of calcination temperature on luminescent properties of Sr3Al2O6:Eu, Dy phosphors prepared by sol–gel-combustion processing

The detailed preparation process of Eu²⁺ and Dy³⁺ ion co-doped Sr₃Al₂O₆ phosphor powders with red long afterglow by sol–gel-combustion method in the reducing atmosphere is reported. X-ray diffraction, scanning electron microscopy and photoluminescence spectroscopy are used to investigate the effects of synthesis temperature on the crystal characteristics, morphology and luminescent properties of the as-synthesized Sr₃Al₂O₆:Eu²⁺, Dy³⁺ phosphors. The results reveal that Sr₃Al₂O₆ crystallizes completely when the combustion ash is sintered at 1200 °C. The excitation and the emission spectra indicate that the excitation broad-band lies chiefly in visible range and the phosphor powders emit strong light at 618 nm under the excitation of 472 nm. The light intensity and the light-lasting time of Sr₃Al₂O₆:Eu²⁺, Dy³⁺ phosphors are increased when increasing the calcination temperatures from 1050 to 1200 °C. The afterglow of Sr₃Al₂O₆:Eu²⁺, Dy³⁺ phosphors sintered at 1200 °C lasts for over 600 s when the excited source is cut off. The red emission mechanism is discussed according to the effect of nephelauxetic and crystal field on the 4f⁶5d¹ → 4f⁷ transition of the Eu²⁺ ions.     

Preparation and characterization of Sr4Al2O7:Eu, Eu phosphors

A new composition of red strontium aluminate phosphor (Sr₄Al₂O₇:Eu³⁺, Eu²⁺) is synthesized using a solid state reaction method in air and in a reducing atmosphere. The investigation of firing temperature indicates that a single phase of Sr₄Al₂O₇ is formed when the firing temperature is higher than 1300 °C and that a Sr₃Al₂O₆ phase is formed as the main peak below 1300 °C. The effects of firing temperature and doping concentration on luminescent properties are investigated. Sr₄Al₂O₇ phosphors exhibit the typical red luminescent properties of Eu³⁺ and Eu²⁺. A comparison photoluminescence study with Sr₃Al₂O₆ phosphor shows that Sr₄Al₂O₇ has higher emission intensity than Sr₃Al₂O₆ as a result of the higher optimum doping concentration of Sr₄Al₂O₇ phosphor.     

Luminescence properties of Eu-activated Ca12Al10.6Si3.4O32Cl5.4: A promising phosphor for solid state lighting

In this article, we synthesized and characterized a novel bluish green phosphor for white light-emitting diodes, Eu²⁺-activated Ca₁₂Al_10.6Si_3.4O₃₂Cl_5.4. The phosphor shows broad and strong absorption in the region (320-450 nm), which is essential for improving the efficiency and quality of white light-emitting diodes. When excited at 380 nm, the phosphor shows two emission bands at around 425 and 500 nm. The main emission peak of Eu²⁺-activated Ca₁₂Al_10.6Si_3.4O₃₂Cl_5.4 exhibits red shift in comparison with that of Eu²⁺-activated Ca₁₂Al₁₄O₃₃, which is due to the introduction of Si and Cl ions. The results show Ca₁₂Al_10.6Si_3.4O₃₂Cl_5.4 is a promising host candidate for the phosphors.     

Sol-gel composition of multicomponent hybrid precursors to long afterglow of CaxSr1 − xAl2O4: Eu phosphors

Ca_xSr_1 − xAl₂O₄: Eu²⁺ photoluminescent materials with high brightness and long afterglow were in situ synthesized by hybrid precursor assembly sol-gel technology in a reductive atmosphere. The particle size of luminescent materials is in the range of 30-60 nm by the estimation of XRD. And SEM shows that there exists uniform morphology and microstructure owing to the hybrid precursors. The influence of co-doping Ca²⁺ and Sr²⁺ on the luminescence of the phosphor was studied. Their excitation and emission spectra were very similar to that of SrAl₂O₄: Eu²⁺ phosphors and all of them have long afterglow phenomenon. Changing the co-doping concentrations of Ca²⁺ and Sr²⁺ in Ca_xSr_1 − xAl₂O₄: Eu²⁺ phosphors, the luminescent intensities are different. When the proportion of Ca and Sr is 6 to 4, the phosphor reaches the strongest emitting intensity.     

Effects of Zn doping on the structural and luminescent properties of Sr4Si3O8Cl4:Eu phosphors

Sr₄Si₃O₈Cl₄: Eu²⁺ phosphors were synthesized by the solid-reaction at high temperature. The emission intensity reaches a maximum at 0.08 mol% of Eu²⁺ concentration. The present paper mainly focused on the effects of Zn²⁺ on the crystallization behavior and photoluminescence (PL) properties of Sr₄Si₃O₈Cl₄:0.08Eu²⁺. Results suggested that no new phase is introduced by co-doping with a small amount of Zn²⁺ ions, but when co-doped with excessive amount of Zn²⁺ ions, Sr₂ZnSi₂O₇ appears. We find that the co-doping of a small amount of Zn²⁺ could remarkably improve the PL intensity of Sr₄Si₃O₈Cl₄:0.08Eu²⁺. When x = 0.05, the intensity of Sr₄Si₃O₈Cl₄:0.08Eu²⁺,xZn²⁺ was increased up to 2.3 times that of pure Sr₄Si₃O₈Cl₄:0.08Eu²⁺, which could be attributed to the flux effect of Zn²⁺ ions, and the Zn²⁺ doping reduces the opportunities of the energy transfer between Eu²⁺.     

Luminescence properties of Ba2LiB5O10:Dy phosphor

A novel warm white phosphor Ba₂LiB₅O₁₀:Dy³⁺ with various Dy³⁺ concentrations was synthesized by the conventional solid-state reaction at 800 °C. The crystal structure of the phosphor was characterized by X-ray diffraction (XRD). The photoluminescence properties of Ba₂LiB₅O₁₀:Dy³⁺ were investigated, and the critical concentration of the activator ion (Dy³⁺) was found to be 0.04 mol per formula unit. Under the ultraviolet excitation of 348 nm, the phosphor presented warm white luminescence with dominating emissions at 484.6 and 577 nm, corresponding to ⁴F_9/2-⁶H_15/2, ⁴F_9/2-⁶H_13/2 transitions, respectively. The chromatic properties of the typical sample Ba₂LiB₅O₁₀:0.04Dy³⁺ phosphor have been found to have chromaticity coordinates of x = 0.31 and y = 0.35.     

Persistent luminescence of SrAl2O4: Eu,Dy, Cr phosphors in the tissue transparency window

We report on the persistent luminescence of SrAl₂O₄: Eu²⁺, Cr³⁺ phosphor centered at 760 nm. The phosphor was prepared by sol-gel-combustion method. Persistent luminescence from Cr³⁺ lasted for hundreds of seconds, comparable to the long afterglow from Eu²⁺ ions in the visible region based on the continuous energy transfer from Eu²⁺ ions to Cr³⁺ ions. The introduction of Dy³⁺ ions into the phosphor further prolonged the afterglow time of Eu²⁺ and Cr³⁺ ions through the depth control of the charge traps. The optimum doping concentrations for Eu²⁺, Cr³⁺ and Dy³⁺ were 1%, 2% and 1.5%, respectively.     

Luminescence and Optical-Memory model of SrAl2O4:Eu2+,Dy3+ and Sr4Al14O25:Eu2+,Dy3+

The photoluminescence, luminescence excitation, and phosphorescence spectra of SrAl²O⁴:Eu²⁺,Dy³⁺ and Sr₄Al₁₄O₂₅:Eu²⁺,Dy³⁺ powder phosphors have been studied in detail at 80 and 300 K. A conceptual model is proposed for strontium-aluminate-based optical memory.     

Luminescence properties of Ca4Y6(SiO4)6O:RE (RE = Eu, Tb, Dy, Sm and Tm) under vacuum ultraviolet excitation

The vacuum ultraviolet excited luminescent properties of Eu³⁺, Tb³⁺, Dy³⁺, Sm³⁺ and Tm³⁺ in the matrices of Ca₄Y₆(SiO₄)₆O were investigated. The bands at about 173 nm in the vacuum ultraviolet excited spectra were attributed to host lattice absorption of the matrix Ca₄Y₆(SiO₄)₆O. For Eu³⁺-doped samples, the O²⁻ → Eu³⁺ CTB was identified at 258 nm. Typical 4f-5d absorption bands in the region of 195-300 nm were observed in Tb³⁺-doped samples. For Dy³⁺-doped and Sm³⁺-doped samples, the broad excitation bands consisted of host absorptions, CTB and f-d transition. For Tm³⁺-doped samples, the O²⁻ → Tm³⁺ CTB was located at 191 nm. About the color purity and emission intensity, Ca₄Y₆(SiO₄)₆O:Tb³⁺ is an attractive candidate of green light PDP phosphor, and Ca₄Y₆(SiO₄)₆O:Dy³⁺ has potential application in the field of mercury-free lamps.     

Dependence of optical properties on the composition of (Ba1−x−ySrxEuy)Si2O2N2 phosphors for white light emitting diodes

BaSi₂O₂N₂: Eu²⁺ is an efficient phosphor because of its high quantum yield and quenching temperature. Partial substitution of Ba²⁺ by Sr²⁺ is the most promising approach to tune the color of phosphors. In this study, a series of (Ba_1−x−ySr_xEu_y)Si₂O₂N₂ (x = 0.0–0.97, y = 0.00–0.10) phosphors are synthesized via high-temperature solid-state reactions. Intense green to yellow phosphors can be obtained by the partial substitution of the host lattice cation Ba²⁺ by either Sr²⁺ or Eu²⁺. The luminescent properties and the relationships among the lowest 5d absorption bands, Stokes shifts, centroid shifts, and the splitting of Eu²⁺ are studied systematically. Then, based on (Ba_1−x−ySr_xEu_y)Si₂O₂N₂ phosphors and near-ultraviolet (∼395 nm)/blue (460 nm) InGaN chips, intense green–yellow light emitting diodes (LEDs) and white LEDs are fabricated. (Ba_0.37Sr_0.60)Si₂O₂N₂: 0.03Eu²⁺ phosphors present the highest efficiency, and the luminous efficiency of white LEDs can reach 17 lm/w. These results indicate that (Ba_1−x−ySr_xEu_y)Si₂O₂N₂ phosphors are promising candidates for solid-state lighting.     

A yellow-emitting Ca3Si2O7: Eu phosphor for white LEDs

A series of yellow-emitting phosphors based on a silicate host matrix, Ca_3 − xSi₂O₇: xEu²⁺, was prepared by solid-state reaction method. The structure and photoluminescent properties of the phosphors were investigated. The XRD results show that the Eu²⁺ substitution of Ca²⁺ does not change the structure of Ca₃Si₂O₇ host and there is no impurity phase for x < 0.12. The SEM images display that phosphors aggregate obviously and the shape of the phosphor particle is irregular. The EDX results reveal that the phosphors consist of Ca, Si, O, Eu and the concentration of these elements is close to the stoichiometric composition. The Ca_3 − xSi₂O₇: xEu²⁺ phosphors can be excited at a wavelength of 300-490 nm, which is suitable for the emission band of near ultraviolet or blue light-emitting-diode (LED) chips. The phosphors exhibit a broad emission region from 520 to 650 nm and the emission peak centered at 568 nm. In addition, the shape and the position of the emission peak are not influenced by the Eu²⁺ concentration and excitation wavelength. The phosphor for x = 0.045 has the strongest excitation and emission intensity, and the Ca_3 − xSi₂O₇: xEu²⁺ phosphors can be used as candidates for the white LEDs.     

Yellow-emitting phosphor of Sr3B2O6:Eu for application to white light-emitting diodes

This work focuses on the development of Eu²⁺-doped strontium (Sr)-borate as a yellow-emitting phosphor and its application to the fabrication of white light-emitting diodes (LEDs). Synthesis of Eu²⁺-doped Sr-borate phosphors was finely tuned for obtaining the efficient yellow luminescence through varying host composition, Eu concentration, and firing temperature. The 1300 °C-fired Eu²⁺-doped Sr₃B₂O₆, which was found to be the most efficient candidate to date, was used for white LED fabrication. Their optical properties were evaluated, resulting in warm white lights with CIE chromaticity coordinates of (0.340–0.372, 0.287–0.314) and color rendering indices of 75–77 under the forward currents of 5–40 mA.     

Luminescence and afterglow in Sr2SiO4:Eu, RE [RE = Ce, Nd, Sm and Dy] phosphors—Role of co-dopants in search for afterglow

Luminescence of Eu²⁺ in Sr₂SiO₄:Eu²⁺, RE³⁺ [RE = Ce, Nd, Sm and Dy] phosphors was studied with a view to obtain an afterglow phosphor. The synthesized phosphors were characterized by powder X-ray diffraction (XRD), diffuse reflectance, photo- and thermoluminescence spectroscopic techniques. Afterglow was observed only with Dy³⁺ co-doped phosphor. The observed afterglow with Dy³⁺ co-doping originated from the formation of suitable traps which was supported by thermoluminescence results.     

Luminescence and energy transfer of Mn co-doped SrSi2O2N2:Eu green-emitting phosphors

Eu²⁺ and Mn²⁺ co-doped SrSi₂O₂N₂ green-phosphors, with promising luminescent properties (examined by their powder diffuse reflection, photoluminescence excitation and emission spectra) suitable for UV converted white LEDs, were produced by high temperature solid-state reaction method. The produced materials exhibited intense broad absorption bands at 220–500 nm and a broad emission band centered at ca. 530 nm, attributed to 4f–5d transitions of Eu²⁺. The emission intensity of Eu²⁺ ions was greatly enhanced by introducing Mn²⁺ ions into SrSi₂O₂N₂:Eu²⁺ due to the energy transfer from Mn²⁺ to Eu²⁺. The energy transfer probability from Mn²⁺ to Eu²⁺ depends strongly on the Mn²⁺ concentration, which is maximized at a Mn²⁺ concentration of 3 mol%. It drastically decreases for higher concentrations. The results indicated that SrSi₂O₂N₂:Eu²⁺, Mn²⁺ is a promising green-emitting phosphor for white-light emitting diodes with near-UV LED chips.     

Luminescent properties of Eu-activated (Sr1−z, Caz)(Al1−y, By)2O4 phosphors for UV LEDs

A series of (Sr_1−z, Ca_z)(Al_1−y, B_y)₂O₄:xEu²⁺ phosphors were synthesized by the sol–gel process and were characterized by X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), and photoluminescence (PL) excitation and emission spectra. The experiment results revealed that the highest intensity of Sr(Al_1.98, B_0.02)O₄:Eu²⁺ phosphor with pure monoclinic SrAl₂O₄ was achieved by annealing at the temperature of 1200 °C and the Eu²⁺ content of 8 mol%. However, when the post-treatment temperature for Sr(Al_1.98, B_0.02)O₄: Eu²⁺ was over 1200 °C, the Sr₄Al₁₄O₂₅ phase appeared as a minor phase, inducing small blue-shift in the emission peak (520–509 nm). Doping higher content of B³⁺ (y = 0.02–0.40) into SrAl₂O₄:Eu²⁺ at 1200 °C resulted in the transformation of phase from SrAl₂O₄ to Sr₄Al₁₄O₂₅ as well as to SrB₂Al₂O₇, which made the emission intensity enhance and the emission shift to a much shorter wavelength region (λ_p = 467 nm). It was found that, instead of purely using Sr atoms, Ca atoms with content of 20–40% could induce the crystal structure of (Sr_1−z, Ca_z)(Al_1−y, B_y)₂O₄:xEu²⁺, which led to SrAl₂O₄ from monoclinic to hexagonal phase. As a result, SrAl₂O₄ solid solution was obtained and then SrAl₂O₄:Eu²⁺ to emit 518 nm green light. At higher Ca content (z > 40%), a new CaAl₂O₄ solid solution was formed and a blue emission of CaAl₂O₄:Eu²⁺ was obtained.     

Sr3.5Mg0.5Si3O8Cl4: Eu bluish-green-emitting phosphor for NUV-based LED

Sr₄Si₃O₈Cl₄:Eu²⁺ and Sr_3.5Mg_0.5Si₃O₈Cl₄:Eu²⁺ phosphors were prepared by a conventional solid state reaction (SS). Excited by 370 nm near-ultraviolet light, the phosphors show an efficient bluish-green wide-band emission centering at 484 nm, which originates from the 4f5d¹ → 4f⁷ transition of Eu²⁺ ion. The excitation spectra of the phosphors are a broad band extending from 250 nm to 400 nm. Mg²⁺-codoping greatly enhances the bluish-green emission of the phosphors. An LED was fabricated by coating the Sr_3.5Mg_0.5Si₃O₈Cl₄:0.08Eu²⁺ phosphor onto an ~ 370 nm-emitting InGaN chip. The LED exhibits bright bluish-green emission under a forward bias of 20 mA. The results indicate that Sr_3.5Mg_0.5Si₃O₈Cl₄:0.08Eu²⁺ is a candidate as a bluish-green component for fabrication of NUV-based white LEDs.     

Photocatalytic effects for the TiO2-coated phosphor materials

This study investigated the photocatalytic behavior of the coupling of TiO₂ with phosphorescent materials. A TiO₂ thin film was deposited on CaAl₂O₄:Eu²⁺,Nd³⁺ phosphor particles by using atomic layer deposition (ALD), and its photocatalytic reaction was investigated by the photobleaching of an aqueous solution of methylene-blue (MB) under visible light irradiation. To clarify the mechanism of the TiO₂-phosphorescent materials, two different samples of TiO₂-coated phosphor and TiO₂–Al₂O₃-coated phosphor particles were prepared. The photocatalytic mechanisms of the ALD TiO₂-coated phosphor powders were different from those of the pure TiO₂ and TiO₂–Al₂O₃-coated phosphor. The absorbance in a solution of the ALD TiO₂-coated phosphor decreased much faster than that of pure TiO₂ under visible irradiation. In addition, the ALD TiO₂-coated phosphor showed moderately higher photocatalytic degradation of MB solution than the TiO₂–Al₂O₃-coated phosphor did. The TiO₂-coated phosphorescent materials were characterized by transmission electron microscopy (TEM), Auger electron spectroscopy (AES) and X-ray photon spectroscopy (XPS).     

Near UV-based LED fabricated with Ba5SiO4(F,Cl)6:Eu as blue- and green-emitting phosphor

A series of halosilicate phosphor, Ba₅SiO₄(F,Cl)₆:Eu²⁺, were synthesized by a solid state reaction. Excited by 370-nm light, Ba₅SiO₄Cl₆:Eu²⁺ exhibits a broad emission band peaking at 440 nm. Partial substitution of Cl⁻ with F⁻ in the host lattice leads to red-shift in the emission band with centering wavelength from 440 nm to 503 nm. The possible mechanism for the luminescence change was discussed based on the XRD patterns. Blue and green LEDs were fabricated by combination of a 370 nm-emitting near UV chip and the optimal Ba₅SiO₄Cl₆:Eu²⁺ and Ba₅SiO₄(F₃Cl₃):Eu²⁺, respectively. This series of phosphors is considered as a promising blue and green component used in fabrication of near UV-based white LEDs.     

Luminescence properties of Dy-doped Li2SrSiO4 for NUV-excited white LEDs

A series of single-phase full color phosphors, Dy³⁺-doped Li₂SrSiO₄ was synthesized by a solid-state reaction method. The phase of the as-prepared powders was measured by X-ray diffraction pattern (XRD) and the chemical composition was characterized using energy dispersive spectroscopy (EDS). The luminescent properties of Li₂SrSiO₄:Dy³⁺ were systematically investigated by concentration quenching, decay behavior and thermal stability measurements. The results suggested that the emission intensity of the Li₂SrSiO₄:Dy³⁺ was much stronger than that of Li₂SrSiO₄:Eu²⁺. It was worth to mention that Li₂SrSiO₄:Dy³⁺ phosphor possessed excellent thermal stability for use in light-emitting diodes (LEDs) and the emission intensity measured at 300 °C was only decreased 8% comparing with that measured at room temperature. Furthermore, the Commission International del’Eclairage (CIE) chromaticity coordinates of Li₂SrSiO₄:Dy³⁺ moved toward the ideal white light coordinates (0.33, 0.33). All results demonstrated that Li₂SrSiO₄:Dy³⁺ might be a potential phosphor for NUV-based white light-emitting diodes.