Study on cylindrical magnetic abrasive finishing using unbonded magnetic abrasives

The process principle and the finishing characteristics of unbonded magnetic abrasive within cylindrical magnetic abrasive finishing are described in this study. The unbonded magnetic abrasive is a mechanical mixture of SiC abrasive and ferromagnetic particles with a SAE30 lubricant. Iron grit and steel grit, for which three various particle sizes were prepared for both, were used as ferromagnetic particles, each of them being mixed with 1.2 and 5.5 μm SiC abrasive, respectively. Also, the finishing characteristics on surface roughness and material removal as well as their mechanisms were investigated. Experimental results indicate that steel grit is more suitable for magnetic abrasive finishing because of its superior hardness and the polyhedron shape. The variations of material characteristics on the work surface both before and after finishing were also investigated. Si content was increased obviously, however its corrosion resistibility decreased on a surface that was finished via steel grit mixed with SiC abrasive.     

Finite element prediction of material removal rate due to electro-chemical spark machining

Electro-chemical spark machining (ECSM) is an innovative hybrid machining process, which combines the features of the electro-chemical machining (ECM) and electrodischarge machining (EDM). Unlike ECM and EDM, ECSM is capable of machining electrically non-conducting materials. This paper attempts to develop a thermal model for the calculation of material removal rate (MRR) during ECSM. First, temperature distribution within zone of influence of single spark is obtained with the application of finite element method (FEM). The nodal temperatures are further post processed for estimating MRR. The developed FEM based thermal model is found to be in the range of accuracy with the experimental results. Further the parametric studies are carried out for different parameters like electrolyte concentration, duty factor and energy partition. The increase in MRR is found to increase with increase in electrolyte concentration due to ECSM of soda lime glass workpiece material. Also, the change in the value of MRR for soda lime glass with concentration is found to be more than that of alumina. MRR is found to increase with increase in duty factor and energy partition for both soda lime glass and alumina workpiece material.     

Improving surface integrity in orthogonal machining of hardened AISI 52100 steel by modeling white and dark layers formation

In machining of hard parts, surface integrity is one of the most specified customer requirements. Often, the major indications of surface integrity are surface roughness and residual stresses. However, the material microstructure also changes in machined-hardened steels, and it must be taken into account for improving product performance. In this paper, a hardness-based flow stress and an empirical model for describing the white and dark layers formation were developed and implemented in a FE code. The proposed model was validated by comparing the predicted results with the experimental evidences.     

A numerical model incorporating the microstructure alteration for predicting residual stresses in hard machining of AISI 52100 steel

Residual stresses induced by machining processes are a consequence of thermo-mechanical and microstructural phenomena generated during the machining operation. Hard machining of AISI 52100 bearing steel is a typical case where the microstructural phenomena associated with white and dark layers formation influences the residual stress distribution. Unfortunately, very limited physical models are available for residual stress prediction including the microstructural effects. This paper presents an experimental and numerical approach to predict residual stresses by incorporating the microstructural phase transformations induced during machining of AISI 52100 steel.     

Ultrasonic assisted magnetic abrasive finishing of hardened AISI 52100 steel using unbonded SiC abrasives

Ultrasonic assisted magnetic abrasive finishing (UAMAF) integrates the use of ultrasonic vibrations and magnetic abrasive finishing (MAF) process to finish surfaces to nanometer order in a relatively short time. The present study emphasizes on the fabrication of UAMAF setup. Using this experimental setup, experimental studies have been carried out with respect to five important process parameters namely supply voltage, abrasive mesh number, rotation of magnet, abrasive weight percentage, and pulse on time (T_on) of ultrasonic vibrations selected based on literature available in the area of MAF process and ultrasonic generator controls. Percentage change in surface roughness (?Ra) for AISI 52100 steel workpiece has been considered as response and unbonded SiC abrasives are used in the work. The experimental results showed that the UAMAF process has better finishing potential as compared to those obtainable by using MAF process for similar processing conditions. The surface roughness value obtained by UAMAF was as low as 22 nm within 80 s on hardened AISI 52100 steel workpiece using unbonded SiC abrasives. Scanning electron microscopy and atomic force microscopy studies were carried out to feel the surface texture produced and to identify finishing mechanism.     

Modeling of material removal and surface roughness in abrasive flow machining process

Abrasive flow machining process provides a high level of surface finish and close tolerances with an economically acceptable rate of surface generation for a wide range of industrial components. This paper deals with the theoretical investigations into the mechanism of abrasive flow machining (AFM) process. A finite element model is developed for the flow of media during AFM and the same is used to evaluate the stresses and forces developed during the process. Theoretical analysis to estimate the material removal and surface roughness obtained during AFM is also proposed. The theoretical results are compared with the experimental data available in the literature, and they are found to agree well.     

Surface integrity generated by oblique machining of steel and iron parts

In this study the surface integrity produced by oblique turning of a range of iron-based materials including C45 carbon, 41Cr4 low-alloy hardened, X6CrNiTi18-10 stainless steels and EN-GJS-500-7 spheroidal iron was quantified by means of 2D and 3D surface roughness parameters, strain-hardening effects and associated residual stresses. Surfaces were produced by a special straight-edged cutting tool with large inclination angle of 55° equipped with carbide and mixed Al₂O₃–TiC ceramic cutting tool inserts. It was documented that oblique machining performed with relatively higher feed rate allows obtaining lower surface roughness and, in general, better bearing characteristics. Moreover, compressive stresses with the maximum value located close to the machined surface and parabolic profile can be induced into the surface layer. The magnitude of stresses depends on the strain-hardening rate of the surface layer.     

A comparative study: polishing characteristics and its mechanisms of three vibration modes in vibration-assisted magnetic abrasive polishing

The automatic precision polishing technique of three-dimensional complicated micro-curved surfaces of components in extremely low surface roughness and high efficiency is greatly demanded by advanced industrial fields. The existing polishing methods have great difficulty in satisfying these demands. Therefore, three modes (horizontal vibration, vertical vibration and compound vibration) of vibration-assisted magnetic abrasive polishing processes have been developed. Previous research focused on each polishing characteristic. The aims of this paper are to characterize effects of vibration of workpiece on magnetic field, polishing pressure, in-process abrasive behavior and polishing performances in three vibration modes and to describe their machining mechanism. Furthermore, a realization of efficient polishing of a 3D micro-curved surface was confirmed to be possible by the process.     

Simulation for the prediction of surface roughness in magnetic abrasive flow finishing (MAFF)

The final machining (or finishing) of precision parts with high level of surface finish and close tolerance is making the application of magnetic abrasive finishing technology increasingly important. Magnetic abrasive flow finishing (MAFF) is a new abrasive finishing process combining the features of abrasive flow finishing (AFF) and magnetic abrasive finishing (MAF). MAFF provides a high level of surface finish and close tolerances for wide range of industrial application. This paper focuses on the modeling and simulation for the prediction of surface roughness on the workpiece surface finished by MAFF process. A finite element model is developed to find the magnetic potential distribution in the magnetic abrasive brush formed during finishing action and then it is used to evaluate machining pressure, surface finish and material removal. The simulation results are compared with the experimental results available in the literature. The simulated workpiece surface roughness shows features similar in nature to the experimental results.     

Finite element analysis and simulation of machining: an addendum: A bibliography (1996–2002)

This bibliography contains references to papers, conference proceedings and theses/dissertations dealing with machining simulated by the finite element methods that were published in 1996–2002. Three hundred and seventy-two references are listed. The paper is an addendum to the author’s bibliography published in J Mater Process Technol 86 (1999) 17–44, which listed references on subjects published between 1976–1996.     

超声辅助微细磨料水射流加工装置的研制及实验研究

为了提高磨料水射流的加工性能,设计了超声辅助微细磨料水射流加工系统,磨料供给采用前混合方式。超声喷嘴装置是该系统的关键,并研究了其加工机理,利用超声振动产生具有空化效应的脉冲水射流,通过脉冲射流的高强度动压力作用和空化作用以提高磨料水射流的加工能力。变幅杆是超声装置的核心部件,通过有限元分析验证变幅杆的性能,确保变幅杆能够有效且准确地工作。冲蚀实验证明:超声振动作用可以提高冲击力及材料去除率。然而,随着振幅的增加,表面质量下降。     

Modeling of spindle-bearing and machine tool systems for virtual simulation of milling operations

This paper presents a general, integrated model of the spindle bearing and machine tool system, consisting of a rotating shaft, tool holder, angular contact ball bearings, housing, and the machine tool mounting. The model allows virtual cutting of a work material with the numerical model of the spindle during the design stage. The proposed model predicts bearing stiffness, mode shapes, frequency response function (FRF), static and dynamic deflections along the cutter and spindle shaft, as well as contact forces on the bearings with simulated cutting forces before physically building and testing the spindles. The proposed models are verified experimentally by conducting comprehensive tests on an instrumented-industrial spindle. The study shows that the accuracy of predicting the performance of the spindles require integrated modeling of all spindle elements and mounting on the machine tool. The operating conditions of the spindle, such as bearing preload, spindle speeds, cutting conditions and work material properties affect the frequency and amplitude of vibrations during machining.     

Experiment and simulation study of 3D magnetic field sensing for magnetic flux leakage defect characterisation

Magnetic flux leakage (MFL) testing is widely used to detect and characterise defects in pipelines, rail tracks and other structures. The measurement of the two field components perpendicular to the test surface and parallel to the applied field in MFL systems is well established. However, it is rarely effective when the shapes of the specimens and defects with respect to the applied field are arbitrary. In order to overcome the pitfalls of traditional MFL measurement, measurement of the three-dimensional (3D) magnetic field is proposed. The study is undertaken using extensive finite element analysis (FEA) focussing on the 3D distribution of magnetic fields for defect characterisation and employing a high sensitivity 3-axis magnetic field sensor in experimental study. Several MFL tests were undertaken on steel samples, including a section of rail track. The experimental and FEA test results show that data from not only the x- and z-axes but also y-axis can give comprehensive positional information about defects in terms of shape and orientation, being especially advantageous where the defect is aligned close to parallel to the applied field. The work concludes that 3D magnetic field sensing could be used to improve the defect characterisation capabilities of existing MFL systems, especially where defects have irregular geometries.     

An analysis of grinding power and surface roughness in external cylindrical grinding of hardened SCM440 steel using the response surface method

The aim of this study was to analyze effectively the grinding power spent during the process and the surface roughness of the ground workpiece in the external cylindrical grinding of hardened SCM440 steel using the response surface method. A Hall effect sensor was used for measuring the grinding power of the spindle driving motor. The surface roughness was also measured and evaluated according to the change of the grinding conditions. Response surface models were developed to predict the grinding power and the surface roughness using the experimental results. From adding simply material removal rate to the contour plot of these mathematical models, it was seen that useful grinding conditions for industrial application could be easily determined.     

Modelling of temperature and forces when orthogonally machining hardened steel

This paper initially considers heat generation in single-point metal cutting and the direct/indirect techniques employed to measure cutting temperatures. The development of analytical models of the cutting process is briefly reviewed, including more recent work involving finite element (FE) methods. Details are given of the different FE packages and formulation methods used by different researchers. Following on from this, an FE model is presented using FORGE 2® to simulate cutting forces and temperature distributions when orthogonal turning a hardened hot work die steel, AISI H13 (52HRC), with polycrystalline cubic boron nitride (PCBN) tooling. Experimental data from infrared chip surface temperature measurements and cutting force output are used to validate the model. Good correlation was obtained between experimental and modelled results for temperature; however, the FE analysis underestimated feed force results due to a lack of adequate workpiece property data and simplistic tool/chip friction assumptions.     

Modeling of white layer formation under thermally dominant conditions in orthogonal machining of hardened AISI 52100 steel

This paper presents a finite element model for white layer formation in orthogonal machining of hardened AISI 52100 steel under thermally dominant cutting conditions that promote martensitic phase transformations. The model explicitly accounts for the effects of stress and strain, transformation plasticity and the effect of volume expansion accompanying phase transformation on the transformation temperature. Model predictions of white layer depth are found to be in agreement with experimental values. The paper also analyzes the effect of white layer formation on residual stress evolution in orthogonal cutting of AISI 52100 hardened steel. Model simulations show that white layer formation does have a significant impact on the magnitude of surface residual stress and on the location of the peak compressive residual stress.     

A new material model for 2D numerical simulation of serrated chip formation when machining titanium alloy Ti–6Al–4V

A new material constitutive law is implemented in a 2D finite element model to analyse the chip formation and shear localisation when machining titanium alloys. The numerical simulations use a commercial finite element software (FORGE 2005^®) able to solve complex thermo-mechanical problems. One of the main machining characteristics of titanium alloys is to produce segmented chips for a wide range of cutting speeds and feeds. The present study assumes that the chip segmentation is only induced by adiabatic shear banding, without material failure in the primary shear zone. The new developed model takes into account the influence of strain, strain rate and temperature on the flow stress and also introduces a strain softening effect. The tool chip friction is managed by a combined Coulomb–Tresca friction law. The influence of two different strain softening levels and machining parameters on the cutting forces and chip morphology has been studied. Chip morphology, cutting and feed forces predicted by numerical simulations are compared with experimental results.     

Finite element modeling of microstructural changes in dry and cryogenic cutting of Ti6Al4V alloy

This paper presents a customized FE model for describing the microstructural changes during dry and cryogenic cutting of Ti6Al4V. It addresses the importance to modify the material behavior taking into account the microstructural changes and the cooling/lubrication effects during the cutting process. With this aim, a user subroutine is implemented in the FE code to describe the surface and subsurface modifications taking place during the cutting process and to implement them in order to properly modify the material flow stress. Thus, the material flow stress is continuously updated during the simulation according to the new microstructure characteristics. The proposed FE model is calibrated and validated by comparison with experimental results.     

基于ABAQUS的螺栓连接结合面仿真与研究

利用ABAQUS软件对螺栓连接结合面进行建模仿真和模态分析,分别对预紧力、连接单元和绑定等3种模型进行仿真分析,并建立螺栓连接试件模态实验进行实验研究。通过验证对比可知,每一种建模方式均能仿真得出螺栓连接试件各阶模态的振型和固有频率,均有各自的误差和模型特点,分别适用于不同的设备机构和环境。验证了各种建模方式对螺栓连接结合面仿真的准确合理性,为以后螺栓连接结合面尤其在数控刀架领域建模仿真方法的选择提供参考。     

双级雾化快凝磁性磨料制备工艺系统的研制

为了获得混粉雾化快凝中的工艺参数,制备性能优良的球形磁性磨料,提高制备工艺系统的稳定性。通过对雾化快凝工艺的分析,设计了双级雾化器、设计了气力送混粉装置与控制系统、设计了雾化水冷室的结构与冷却供水系统。通过FLUENT流体分析软件,对双级雾化器在不同压力配比下的数值分析,模拟出在上级雾化压力为1.2MPa、下级雾化压力为2.5MPa时得到均匀的速度流场,保证雾化过程的持续性。在现有设计的基础上,通过实验验证了上述设备与工艺参数准确性,制备出了陶瓷硬质磨料颗粒牢固地镶嵌在铁基体表层的球形磁性磨料。