QuadriFlow: A Scalable and Robust Method for Quadrangulation

QuadriFlow is a scalable algorithm for generating quadrilateral surface meshes based on the Instant Field‐Aligned Meshes of Jakob et al. (ACM Trans. Graph. 34(6):189, 2015). We modify the original algorithm such that it efficiently produces meshes with many fewer singularities. Singularities in quadrilateral meshes cause problems for many applications, including parametrization and rendering with Catmull‐Clark subdivision surfaces. Singularities can rarely be entirely eliminated, but it is possible to keep their number small. Local optimization algorithms usually produce meshes with many singularities, whereas the best algorithms tend to require non‐local optimization, and therefore are slow. We propose an efficient method to minimize singularities by combining the Instant Meshes objective with a system of linear and quadratic constraints. These constraints are enforced by solving a global minimum‐cost network flow problem and local boolean satisfiability problems. We have verified the robustness and efficiency of our method on a subset of ShapeNet comprising 17,791 3D objects in the wild. Our evaluation shows that the quality of the quadrangulations generated by our method is as good as, if not better than, those from other methods, achieving about four times fewer singularities than Instant Meshes. Other algorithms that produce similarly few singularities are much slower; we take less than ten seconds to process each model. Our source code is publicly available.     

Real‐time Bas‐Relief Generation from Depth‐and‐Normal Maps on GPU

To design a bas‐relief from a 3D scene is an inherently interactive task in many scenarios. The user normally needs to get instant feedback to select a proper viewpoint. However, current methods are too slow to facilitate this interaction. This paper proposes a two‐scale bas‐relief modeling method, which is computationally efficient and easy to produce different styles of bas‐reliefs. The input 3D scene is first rendered into two textures, one recording the depth information and the other recording the normal information. The depth map is then compressed to produce a base surface with level‐of‐depth, and the normal map is used to extract local details with two different schemes. One scheme provides certain freedom to design bas‐reliefs with different visual appearances, and the other provides a control over the level of detail. Finally, the local feature details are added into the base surface to produce the final result. Our approach allows for real‐time computation due to its implementation on graphics hardware. Experiments with a wide range of 3D models and scenes show that our approach can effectively generate digital bas‐reliefs in real time.     

Principal Geodesic Analysis in the Space of Discrete Shells

Important sources of shape variability, such as articulated motion of body models or soft tissue dynamics, are highly nonlinear and are usually superposed on top of rigid body motion which must be factored out. We propose a novel, nonlinear, rigid body motion invariant Principal Geodesic Analysis (PGA) that allows us to analyse this variability, compress large variations based on statistical shape analysis and fit a model to measurements. For given input shape data sets we show how to compute a low dimensional approximating submanifold on the space of discrete shells, making our approach a hybrid between a physical and statistical model. General discrete shells can be projected onto the submanifold and sparsely represented by a small set of coefficients. We demonstrate two specific applications: model‐constrained mesh editing and reconstruction of a dense animated mesh from sparse motion capture markers using the statistical knowledge as a prior.     

Projective Feature Learning for 3D Shapes with Multi‐View Depth Images

Feature learning for 3D shapes is challenging due to the lack of natural paramterization for 3D surface models. We adopt the multi‐view depth image representation and propose Multi‐View Deep Extreme Learning Machine (MVD‐ELM) to achieve fast and quality projective feature learning for 3D shapes. In contrast to existing multi‐view learning approaches, our method ensures the feature maps learned for different views are mutually dependent via shared weights and in each layer, their unprojections together form a valid 3D reconstruction of the input 3D shape through using normalized convolution kernels. These lead to a more accurate 3D feature learning as shown by the encouraging results in several applications. Moreover, the 3D reconstruction property enables clear visualization of the learned features, which further demonstrates the meaningfulness of our feature learning.     

SAFE: Structure‐aware facade editing

Many man‐made objects, in particular building facades, exhibit dominant structural relations such as symmetry and regularity. When editing these shapes, a common objective is to preserve these relations. However, often there are numerous plausible editing results that all preserve the desired structural relations of the input, creating ambiguity. We propose an interactive facade editing framework that explores this structural ambiguity. We first analyze the input in a semi‐automatic manner to detect different groupings of the facade elements and the relations among them. We then provide an incremental editing process where a set of variations that preserve the detected relations in a particular grouping are generated at each step. Starting from one input example, our system can quickly generate various facade configurations.     

Multiple Shape Correspondence by Dynamic Programming

We present a multiple shape correspondence method based on dynamic programming, that computes consistent bijective maps between all shape pairs in a given collection of initially unmatched shapes. As a fundamental distinction from previous work, our method aims to explicitly minimize the overall distortion, i.e., the average isometric distortion of the resulting maps over all shape pairs. We cast the problem as optimal path finding on a graph structure where vertices are maps between shape extremities. We exploit as much context information as possible using a dynamic programming based algorithm to approximate the optimal solution. Our method generates coarse multiple correspondences between shape extremities, as well as denser correspondences as by‐product. We assess the performance on various mesh sequences of (nearly) isometric shapes. Our experiments show that, for isometric shape collections with non‐uniform triangulation and noise, our method can compute relatively dense correspondences reasonably fast and outperform state of the art in terms of accuracy.     

Hierarchical Quad Meshing of 3D Scanned Surfaces

In this paper we present a novel method to reconstruct watertight quad meshes on scanned 3D geometry. There exist many different approaches to acquire 3D information from real world objects and sceneries. Resulting point clouds depict scanned surfaces as sparse sets of positional information. A common downside is the lack of normals, connectivity or topological adjacency data which makes it difficult to actually recover a meaningful surface. The concept described in this paper is designed to reconstruct a surface mesh despite all this missing information. Even when facing varying sample density, our algorithm is still guaranteed to produce watertight manifold meshes featuring quad faces only. The topology can be set‐up to follow superimposed regular structures or align naturally to the point cloud's shape. Our proposed approach is based on an initial divide and conquer subsampling procedure: Surface samples are clustered in meaningful neighborhoods as leafs of a kd‐tree. A representative sample of the surface neighborhood is determined for each leaf using a spherical surface approximation. The hierarchical structure of the binary tree is utilized to construct a basic set of loose tiles and to interconnect them. As a final step, missing parts of the now coherent tile structure are filled up with an incremental algorithm for locally optimal gap closure. Disfigured or concave faces in the resulting mesh can be removed with a constrained smoothing operator.     

A unified discrete framework for intrinsic and extrinsic Dirac operators for geometry processing

Spectral mesh analysis and processing methods, namely ones that utilize eigenvalues and eigenfunctions of linear operators on meshes, have been applied to numerous geometric processing applications. The operator used predominantly in these methods is the Laplace‐Beltrami operator, which has the often‐cited property that it is intrinsic, namely invariant to isometric deformation of the underlying geometry, including rigid transformations. Depending on the application, this can be either an advantage or a drawback. Recent work has proposed the alternative of using the Dirac operator on surfaces for spectral processing. The available versions of the Dirac operator either only focus on the extrinsic version, or introduce a range of mixed operators on a spectrum between fully extrinsic Dirac operator and intrinsic Laplace operator. In this work, we introduce a unified discretization scheme that describes both an extrinsic and intrinsic Dirac operator on meshes, based on their continuous counterparts on smooth manifolds. In this discretization, both operators are very closely related, and preserve their key properties from the smooth case. We showcase various applications of our operators, with improved numerics over prior work.     

Directional Field Synthesis,Design, and Processing

Direction fields and vector fields play an increasingly important role in computer graphics and geometry processing. The synthesis of directional fields on surfaces, or other spatial domains, is a fundamental step in numerous applications, such as mesh generation, deformation, texture mapping, and many more. The wide range of applications resulted in definitions for many types of directional fields: from vector and tensor fields, over line and cross fields, to frame and vector‐set fields. Depending on the application at hand, researchers have used various notions of objectives and constraints to synthesize such fields. These notions are defined in terms of fairness, feature alignment, symmetry, or field topology, to mention just a few. To facilitate these objectives, various representations, discretizations, and optimization strategies have been developed. These choices come with varying strengths and weaknesses. This report provides a systematic overview of directional field synthesis for graphics applications, the challenges it poses, and the methods developed in recent years to address these challenges.     

Adaptive Bas‐relief Generation from 3D Object under Illumination

Bas‐relief is designed to provide 3D perception for the viewers under illumination. For the problem of bas‐relief generation from 3D object, most existing methods ignore the influence of illumination on bas‐relief appearance. In this paper, we propose a novel method that adaptively generate bas‐reliefs with respect to illumination conditions. Given a 3D object and its target appearance, our method finds an adaptive surface that preserves the appearance of the input. We validate our approach through a variety of applications. Experimental results indicate that the proposed approach is effective in producing bas‐reliefs with desired appearance under illumination.     

Packing Irregular Objects in 3D Space via Hybrid Optimization

Packing problems arise in a wide variety of practical applications. The basic problem is that of placing as many objects as possible in a non‐overlapping configuration within a given container. Problems involving irregular shapes are the most challenging cases. In this paper, we consider the most general forms of irregular shape packing problems in 3D space, where both the containers and the objects can be of any shapes, and free rotations of the objects are allowed. We propose a heuristic method for efficiently packing irregular objects by combining continuous optimization and combinatorial optimization. Starting from an initial placement of an appropriate number of objects, we optimize the positions and orientations of the objects using continuous optimization. In combinatorial optimization, we further reduce the gaps between objects by swapping and replacing the deployed objects and inserting new objects. We demonstrate the efficacy of our method with experiments and comparisons.     

Möbius Registration

Conformal parameterizations over the sphere provide high‐quality maps between genus zero surfaces, and are essential for applications such as data transfer and comparative shape analysis. However, such maps are not unique: to define correspondence between two surfaces, one must find the Möbius transformation that best aligns two parameterizations—akin to picking a translation and rotation in rigid registration problems. We describe a simple procedure that canonically centers and rotationally aligns two spherical maps. Centering is implemented via elementary operations on triangle meshes in ?³, and minimizes area distortion. Alignment is achieved using the FFT over the group of rotations. We examine this procedure in the context of spherical conformal parameterization, orbifold maps, non‐rigid symmetry detection, and dense point‐to‐point surface correspondence.     

The shape variational autoencoder: A deep generative model of part‐segmented 3D objects

We introduce a generative model of part‐segmented 3D objects: the shape variational auto‐encoder (ShapeVAE). The ShapeVAE describes a joint distribution over the existence of object parts, the locations of a dense set of surface points, and over surface normals associated with these points. Our model makes use of a deep encoder‐decoder architecture that leverages the part‐decomposability of 3D objects to embed high‐dimensional shape representations and sample novel instances. Given an input collection of part‐segmented objects with dense point correspondences the ShapeVAE is capable of synthesizing novel, realistic shapes, and by performing conditional inference enables imputation of missing parts or surface normals. In addition, by generating both points and surface normals, our model allows for the use of powerful surface‐reconstruction methods for mesh synthesis. We provide a quantitative evaluation of the ShapeVAE on shape‐completion and test‐set log‐likelihood tasks and demonstrate that the model performs favourably against strong baselines. We demonstrate qualitatively that the ShapeVAE produces plausible shape samples, and that it captures a semantically meaningful shape‐embedding. In addition we show that the ShapeVAE facilitates mesh reconstruction by sampling consistent surface normals.     

Retargeting 3D Objects and Scenes with a General Framework

In this paper, we introduce an interactive method suitable for retargeting both 3D objects and scenes. Initially, the input object or scene is decomposed into a collection of constituent components enclosed by corresponding control bounding volumes which capture the intra‐structures of the object or semantic grouping of objects in the 3D scene. The overall retargeting is accomplished through a constrained optimization by manipulating the control bounding volumes. Without inferring the intricate dependencies between the components, we define a minimal set of constraints that maintain the spatial arrangement and connectivity between the components to regularize the valid retargeting results. The default retargeting behavior can then be easily altered by additional semantic constraints imposed by users. This strategy makes the proposed method highly flexible to process a wide variety of 3D objects and scenes under an unified framework. In addition, the proposed method achieved more general structure‐preserving pattern synthesis in both object and scene levels. We demonstrate the effectiveness of our method by applying it to several complicated 3D objects and scenes.     

Perfect Matching Quad Layouts for Manifold Meshes

This paper introduces a new approach to automatically generate pure quadrilateral patch layouts on manifold meshes. The algorithm is based on a careful construction of a singularity graph of a given input frame field or a given periodic global parameterization. A pure quadrilateral patch layout is then derived as a constrained minimum weight perfect matching of that graph. The resulting layout is optimal relative to a balance between coarseness and geometric feature alignment. We formulate the problem of finding pure quadrilateral patch layouts as a global optimization problem related to a well‐known concept in graph theory. The main advantage of the new method is its simplicity and its computation speed. Patch layouts generated by the present algorithm are high quality and are very competitive compared to current state of the art.     

Automatic 3D Indoor Scene Updating with RGBD Cameras

Since indoor scenes are frequently changed in daily life, such as re‐layout of furniture, the 3D reconstructions for them should be flexible and easy to update. We present an automatic 3D scene update algorithm to indoor scenes by capturing scene variation with RGBD cameras. We assume an initial scene has been reconstructed in advance in manual or other semi‐automatic way before the change, and automatically update the reconstruction according to the newly captured RGBD images of the real scene update. It starts with an automatic segmentation process without manual interaction, which benefits from accurate labeling training from the initial 3D scene. After the segmentation, objects captured by RGBD camera are extracted to form a local updated scene. We formulate an optimization problem to compare to the initial scene to locate moved objects. The moved objects are then integrated with static objects in the initial scene to generate a new 3D scene. We demonstrate the efficiency and robustness of our approach by updating the 3D scene of several real‐world scenes.     

Interactive Modeling of Mechanical Objects

Objects with various types of mechanical joints are among the most commonly built. Joints implement a vocabulary of simple constrained motions (kinematic pairs) that can be used to build more complex behaviors. Defining physically correct joint geometry is crucial both for realistic appearance of models during motion, as these are typically the only parts of geometry that stay in contact, and for fabrication. Direct design of joint geometry often requires more effort than the design of the rest of the object geometry, as it requires design of components that stay in precise contact, are aligned with other parts, and allow the desired range of motion. We present an interactive system for creating physically realizable joints with user‐controlled appearance. Our system minimizes or, in most cases, completely eliminates the need for the user to manipulate low‐level geometry of joints. This is achieved by automatically inferring a small number of plausible combinations of joint dimensions, placement and orientation from part geometry, with the user making the final high‐level selection based on object semantic. Through user studies, we demonstrate that functional results with a satisfying appearance can be obtained quickly by users with minimal modeling experience, offering a significant improvement in the time required for joint construction, compared to standard modeling approaches.