共查询到20条相似文献,搜索用时 78 毫秒
1.
本文阐述了水平定向钻进铺管时钻机工况、钻进泥浆和聚乙烯管的相互关系。介绍了工地地质条件、测量仪表、研究方法和检测结果。经过三期试验,对铺设的七条55—180m的高密度和中密度聚乙烯管进行了研究。讨论了钻机拉力、泥浆压力、钻孔直径和轨迹等对管子负荷和应变、环偏移和外形的影响。提供了一些对生产有意义的结论。 相似文献
2.
总结了煤炭地质勘查监理的特点和性质,提出了前期准备阶段、设计阶段、招投标阶段、施工阶段、报告编制阶段各监理阶段任务和内容、主要方法和途径、重点和主要环节,并提出了地质勘查监理的目标、制度和队伍建设方法. 相似文献
3.
HSE管理体系在地质钻探施工中的应用 总被引:2,自引:1,他引:1
HSE管理是关于健康、安全和环境的管理办法。它集施工作业经验和危害防治技术于一体,充实了健康、安全、环保这3项内容,形成了完整的一体化的管理体系。通过实践证明了壳牌公司HSE理念、目标和管理体系的先进性、科学性和前瞻性。通过分析和对比,指出了我国探矿项目在安全管理上的差距和不足;提出了在地勘单位建立和实施HSE管理体系的必要性和可行性。 相似文献
4.
5.
6.
针对刮板输送机的电动机、减速机、液压系统、刮板链、刮板槽在生产和使用中发生故障的现象和原因进行了分析,制定了有效的故障检测和处理方法,为技术人员的日常检修工作提供了依据,极大地方便了刮板输送机的检修和维护。 相似文献
7.
文章提出了气态炸药和气体炸药的概念,论述了气态炸药的客观存在性、破坏性和可利用性,预测了气体炸药在矿山工程中的应用前景,对气体炸药的研究、制造、使用和规范提出了建议和设想。 相似文献
8.
9.
中国非金属矿加工业发展现状 总被引:6,自引:6,他引:6
郑水林 《中国非金属矿工业导刊》2006,(3):3-8
本文从产业规模、产量、价格以及出口量和出口量值的变化综述和分析了中国非金属矿工业现状;从粉碎、分级、提纯、改性、复合以及矿物材料加工技术等方面综述和分析了非金属加工技术现状;并根据现代高技术和新材料的发展以及资源综合利用和循环经济发展的要求展望了非金属矿加工业的发展趋势。文中列出了2004~2005年中国主要非金属矿产品的产量和2005年出口量的统计数据;对2002年以来部分非金属矿产品的进、出口数量和价值的变化列表进行了对比分析。 相似文献
10.
本文根据煤层底板松软支柱钻底的情况叙述了使用大底座丛柱的过程,对比了使用大底座丛柱和支柱用木鞋、铁鞋、圆锥台柱底垫的经济技术效果。认为使用大底座丛柱后提高了支柱的初撑力和工作阻力、减少了顶板下沉和钻底现象、有效地控制顶板裂隙和离层向工作面方向发展、减少了支柱丢失量。从而使产量提高了50%、坑木下降50.9%、顶板事故减少81.8%。 相似文献
11.
对兖矿集团收购澳大利亚菲利克斯公司过程中强化风险控制的做法进行分析——注重培育资本、技术、管理和品牌优势,坚持循序渐进原则从点上积累经验,收购过程注重策略和技巧。 相似文献
12.
The need for an accurate and comprehensive understanding of load behaviour in industrial mills is outlined, and the implications of the availability of techniques for measuring load behaviour in these mills for both design and control is explored. Some research performed on a pilot mill used to investigate the effect of grid liners on autogenous milling is described. Considerable slip between liners and load occurred, with the result that a simple torque model (taking into account the orientation of the load and the slurry pool as measured by conductivity probes passing through the mill shell) was adequate for describing mill power at high mill speeds. The different behaviour of overflow and discharge mills as affected by slurry and load volume was explored. Some work involving the measurement of the axially distributed behaviour of the load in an industrial mill is then described. Liner movement, load orientation (measured with conductivity probes) and load temperature were measured as a function of axial position. The load orientation was found (surprisingly) to be almost independent of axial position but was a strong function of load volume. The axial temperature profile correlated in a logical fashion with other operating conditions. The relevance of these measurements for mill control is explored. 相似文献
13.
东坑仔煤矿在开采后期,通过不断深化挖潜存量资源,进行生产技术改造,加大对老区地质找煤复采力度,取得了良好的效果。该矿针对薄硬煤开采过程中存在的问题,提出了改进薄硬煤层开采的技术措施。 相似文献
14.
我国煤矿瓦斯抽采与利用的现状及问题 总被引:7,自引:0,他引:7
分析了我国煤矿瓦斯抽采现状,提出我国煤矿瓦斯抽采利用领域存在抽采难度增大,技术与装备落后,基础理论研究和技术创新不足以及国家税收、财政等鼓励政策力度不足等问题,并有针对性地提出对策建议。 相似文献
15.
16.
17.
地下水同井抽回井施工技术与应用研究 总被引:3,自引:1,他引:2
地下水同井抽回井主要应用于浅层地热能开发。细颗粒地层中地下水抽回井的比例模式多数为1∶3~1∶6,不仅增加建设成本,而且造成占地面积大、管理不便和回灌困难等问题。针对该问题,通过分析和研究,利用钻探理论和水文地质条件设计了"同井抽回两用系统",实现了在同一口井内抽水和回灌之目的,并在实际工程中取得了较好的效果。就钻井设备选择、成井工艺及应用效果进行了详细阐述。 相似文献
18.
Kumar Dheeraj 《煤炭学报(英文版)》2010,16(3):277-283
There is tremendous growth in the use of Geographic Information Systems (GIS), Global Positioning Systems (GPS), Remote Sensing,
Satellite Communication, and Modeling &; Simulation techniques. These tools and techniques helps significantly in characterizing
infrastructure, risk area and disaster zones, planning and implementation of hazards reduction measures etc. Communication
satellites becomes vital for providing emergency communication and timely relief measures. Integration of space technology
inputs into natural disaster monitoring and mitigation mechanisms is critical for hazard reduction. This paper mainly focused
on all the issues described above. Major emphasis had been given to the recent developments in information &; communication
technology enabled tools and their applications in mining industries for safe mining operations with increased productivity. 相似文献
19.