Magnetic ordering and magnetic properties of ErAuxNi1−xIn (0 ≤ x ≤ 1) solid solution

The ErAu_xNi_1−xIn (0 ≤ x ≤ 1) quasiternary compounds crystallize in the hexagonal layered crystal structure of ZrNiAl-type. ErAuIn was reported to be an antiferromagnet with T_N = 3 K and magnetic moments having triangular arrangement within the basal plane (the magnetic order is described by the propagation vector ). On the contrary ErNiIn is a ferromagnet with T_C = 9 K and magnetic moments pointing along the c-axis. The magnetic ordering in ErAu_xNi_1−xIn (0 < x < 1) solid solution, has been investigated by neutron diffractometry in the temperature range between 1.5 and 15 K. Moreover, bulk magnetic measurements have been carried out in the range 1.72–400 K. All alloys of intermediate composition were found to be antiferromagnets with T_N between 4.6 and 7 K. Below 2 K their magnetic order is described by the propagation vector and magnetic moments are aligned along the c-axis. However, for alloys with 0.2 ≤ x ≤ 0.7 the propagation vector was found to turn into with increasing temperature.     

Structural, magnetic and electrical transport properties for a series of La1−xSrxFe1−xMnxO3 (0.3 ≤ x ≤ 0.7) compounds

The structural, electrical transport and magnetic properties have been studied for compounds: La_1−xSr_xFe_1−xMn_xO₃ (0.3 ≤ x ≤ 0.7). The lattice parameter, a, first decreases with x, and followed by an increase when Sr²⁺ and Mn⁴⁺ was continuously doped. The cell parameters, b and c, slightly decrease with coupled substitution of Sr²⁺ for La³⁺ and Mn⁴⁺ for Fe³⁺. In the paramagnetic temperature range, formation of magnetic clusters is suggested; the sizes of clusters decrease with x up to 0.5, following that they increase sharply with continuing doping. The electrical behaviors of all specimens demonstrate insulators and the electrical resistivity increases with content of Mn⁴⁺ and Sr²⁺ ions doped. A variable range hopping model is suitable to describe electrical transport process for the compounds at low temperature. At high temperature the electrical transport process can be described by bipolaron model for all compounds.     

Effect of potassium doping on the structural, magnetic and magnetocaloric properties of La0.7Sr0.3−xKxMnO3 perovskite manganites

We investigate the effect of potassium doping on the structural, magnetic and magnetocaloric properties of La_0.7Sr_0.3−xK_xMnO₃ (x = 0.05, 0.1, 0.15 and 0.2) powder samples. Our polycrystalline compounds were synthesized using the solid-state reaction at high temperature. X-ray diffraction characterizations showed that all our studied samples crystallize in the distorted rhombohedral system with space group. With increasing potassium content, the unit cell volume exhibits a broad maximum around x = 0.15. Magnetization measurements versus temperature showed that all our samples exhibit a paramagnetic to ferromagnetic transition with decreasing temperature. The Curie temperature T_C is found to decrease from 365 K for x = 0 to 328 K for x = 0.2 as well as the saturated magnetization M_sp which shifts from 3.68 μ_B/Mn for x = 0 to 3.05 μ_B/Mn for x = 0.2. The critical exponent γ defined as M_sp (T) = M_sp(0)[1−(T/T_C)]^γ is found to remain almost constant and equal to 0.33 for all our samples. The maximum of magnetic entropy changes |ΔS_max| of La_0.7Sr_0.3−xK_xMnO₃ for x = 0.05 and 0.15 is found to be respectively, 1.37 and 1.2 J kg⁻¹ K⁻¹ under a magnetic field change of 1 T.     

Hydrogenation of CaLi2−xMgx (0 ≤ x ≤ 2) with C14 Laves phase structure

CaLi_2−xMg_x (0 ≤ x ≤ 2) which has the C14-type Laves phase structure has been successfully synthesized and hydrogenated. The C14-type Laves phase structure was kept after hydrogenation of CaLi_2−xMg_x (x = 0.2, 0.5, 1). After hydrogenation of CaLi₂ and CaMg₂, the Laves phase disappeared. The CaH₂ and LiH phases were formed from CaLi₂ and the CaH₂ and Mg phases from CaMg₂, respectively. CaLi_2−xMg_x (0 < x < 2) ternary alloys formed stable hydride phases with the C14-type Laves phase structure in contrast to CaLi₂ and CaMg₂ binary alloys.     

Studies on structural and electrical properties of Co1−xNixFe1.9Mn0.1O4 ferrite

Nickel-doped iron-deficient cobalt ferrite with small amount of manganese having the chemical composition Co_1−xNi_xFe_1.9Mn_0.1O₄, with x = 0.2, 0.4, 0.6 and 0.8, were prepared by standard double sintering ceramic method. The spinel phase formation was confirmed by X-ray diffraction (XRD). The DC resistivity measurements with temperature indicate a semiconducting behavior showing a linear decrease with increasing temperature and the doping of Ni enhances the resistivity. Maximum resistivity of the order of 10⁹ Ω cm was found for composition x = 0.8. Room temperature dielectric constant measurements with frequency (100 Hz to 1 MHz), show usual dielectric dispersion. Also, the variation of room temperature AC conductivity as a function of frequency were studied and explained by using Maxwell–Wagner two-layer model. The studies on dielectric constant (′), loss tangent (tan δ) and AC conductivity (σ_AC), at four different frequencies (viz., 1, 10, 100 kHz and 1 MHz), with temperature were made.     

Dielectric and magnetic properties of 0.7Bi(Fe1−xCrx)O3–0.1BaTiO3–0.2PbTiO3 solid solutions

0.7Bi(Fe_1−xCr_x)O₃–0.1BaTiO₃–0.2PbTiO₃ (x = 0, 0.1, 0.2, 0.3) solid solutions were prepared by the traditional ceramic process. X-ray diffraction results revealed that the samples with x = 0–0.3 showed pure perovskite structure. Frequency and temperature dependences of dielectric constants and dielectric loss of the samples were investigated. Both dielectric constant and the loss tangent increased at given frequencies (100 Hz–1 MHz), while the Curie temperature of the solid solutions decreased with increasing Cr content. Room temperature magnetic hysteresis loops indicated that an appropriate amount of Cr could improve magnetization of the solid solutions.     

Magnetic and structural properties of the chromium-based Mn1−xCdxCr2S4 thiospinel

The (Mn_1−xCd_x)Cr₂S₄ phases (0 ≤ x ≤ 0.6) have been synthesized from the corresponding elements at 1123 K. These samples were characterized by powder X-ray diffraction (XRD) and magnetic susceptibility. The (Mn_1−xCd_x)Cr₂S₄ compounds crystallize in the space group Fd-3m with cell parameters a = 10.101(6) Å, 10.139(3) Å, 10.165(2) Å, and 10.192(1) Å for x = 0, 0.2, 0.4 and 0.6, respectively. An overall ferrimagnetic behavior is observed for all samples. The ferromagnetic component increases rapidly when manganese is substituted by non-magnetic cadmium, as shown by ZFC/FC measurements. At the same time, the value of the magnetization M₅₀ at 50 kOe, deduced from M(H) loops, also increases with increasing cadmium content because the antiferromagnetic alignment between chromium and manganese spins is progressively lost, leading toward well aligned moments pointing into the same direction. These results are explained by a rearrangement of the chromium spins when Mn located at the tetrahedral sites, is substituted by Cd.     

Structural, electrical and magnetic properties of Cu1−xZnxFe2O4 ferrites (0 ≤ x ≤ 1)

Copper–zinc ferrites bearing chemical formula Cu_1−xZn_xFe₂O₄ for x ranging from 0.0 to 1.0 with the step increment of 0.2 were prepared by the standard solid-state technique. The variation of Zn substitution has a significant effect on the structural, electrical and magnetic properties. Lattice parameters ‘a’ increased from 8.370 to 8.520 Å. Dielectric constant decreased up to 311 with the increase in frequency from 80 Hz to 1 MHz at room temperature. All the samples follow the Maxwell–Wagner's interfacial polarization. Saturation magnetization, magnetic moment and Yafet–Kittel angles were also determined. The possible reasons responsible for the change in density related, electrical and magnetic properties with the increase in Zn concentration are undertaken.     

A substitution of nickel by antimony:: Crystal and electronic structure of the new antimonide Hf6Ni1−xSb2+x

The ternary antimonides Hf₆M_1−xSb_2+x (M=Fe, Co, Ni) were prepared by arc-melting of stoichiometric mixtures of Hf, HfSb₂ and M. According to the single crystal structure analyses, performed on Hf₆NiSb₂ and Hf₆Ni_0.76Sb_2.24, Hf₆M_1−xSb_2+x crystallizes in an ordered variant of the Fe₂P structure type with the M and Sb atoms occupying the two P positions on 1b and 2c of space group P

Full-size image

2m, respectively (Zr₆CoAl₂ type). The 3d metal atoms M can partially be replaced by antimony, leading to significant, anisotropic changes in the lattice dimensions which are a=765.6(1) pm, c=362.10(7) pm, V=183.81(5)×10⁶pm³ for Hf₆NiSb₂, and a=760.5(1) pm, c=372.40(7) pm, V=186.53(5)×10⁶pm³ for Hf₆Ni_0.76Sb_2.24 as determined by single crystal data. Calculations of the electronic structure of Hf₆NiSb₂ using the Extended Hückel approximation show strong bonding Hf–Hf, Hf–Ni, and Hf–Sb interactions.     

Investigation of DC conductivity and switching phenomenon of Se80Te20−xGex amorphous system

Se₈₀Te_20−xGe_x (x = 5, 7 and 10 at%) chalcogenide glass system was prepared by the conventional melt-quenching technique. Thin films of different thicknesses (283–823 nm) were prepared by thermal evaporation technique. The DC conductivity and switching properties were investigated in the temperature range 303–373 K below the corresponding glass transition temperature. The obtained results of DC conductivity showed that it decreases with decreasing Te content in the considered system, while it increases with temperature as well as with film thickness through the studied range. The conduction activation energy has two values E_σ1 and E_σ2 indicating the presence of two different conduction mechanisms through the studied range of temperature. The obtained results of the temperature dependence of DC conductivity are explained in accordance with Mott and Davis model. The switching effect in amorphous films was also investigated. The switching phenomenon for these compositions was of the memory type. The mean value of the threshold voltage increases linearly with increasing film thickness in the range 283–823 mm, while it decreases exponentially with increasing temperature in the investigated range. Values of the threshold voltage and power activation energies were obtained for the investigated compositions. The obtained results agree with the electrothermal model for the switching process.     

Structure, microstructure and electrical properties of (1 − x − y)Bi0.5Na0.5TiO3–xBi0.5K0.5TiO3–yBi0.5Li0.5TiO3 lead-free piezoelectric ceramics

The ternary system (1 − x − y)Bi_0.5Na_0.5TiO₃–xBi_0.5K_0.5TiO₃–yBi_0.5Li_0.5TiO₃ (abbreviated to BNKLT-x/y) was synthesized by conventional oxide-mixed method. The phase structure, microstructure, and dielectric, ferroelectric and piezoelectric properties of the ceramics were investigated. The X-ray diffraction patterns showed that pure perovskite phase with rhombohedral structure can be obtained in all the ceramics. The grain size varied with x and y. The temperature dependence of dielectric constant and dielectric loss revealed there were two phase transitions which were from ferroelectric (tetragonal) to anti-ferroelectric (rhombohedral) and anti-ferroelectric to paraelectric (cubic). Either increasing x or y content can make T_m (the temperature at which dielectric constant _r reaches the maximum) increase. With the addition of Bi_0.5K_0.5TiO₃, the remanent polarization P_r increased but the coercive field E_c decreased. With the addition of Bi_0.5Li_0.5TiO₃, P_r increased obviously and E_c increased slightly. Due to the stronger ferroelectricity by modifying Bi_0.5K_0.5TiO₃ and Bi_0.5Li_0.5TiO₃, the piezoelectric properties were enhanced at x = 0.22 and y = 0.10, which were as follows: P_r = 31.92 μC/cm², E_c = 32.40 kV/cm, _r = 1118, tan δ = 0.041, d₃₃ = 203 pC/N and K_p = 0.31. The results show that the BNKLT-x/y ceramics are promising candidates for the lead-free materials.     

Self-propagating high-temperature synthesis with post-heat treatment of La1−xSrxFeO3 (x = 0–1) perovskite as catalyst for soot combustion

La_1−xSr_xFeO₃ (x = 0–1) perovskite, Sr-substituted LaFeO₃, was prepared by Self-propagating high-temperature synthesis (SHS) and its catalytic activity for soot combustion was experimentally examined in comparison with that of a conventional Pt/Al₂O₃ catalyst. The products were also characterized by XRD, FE-SEM, and BET specific surface area. The XRD analysis revealed that all the products had a perovskite phase as the major compound, together with intermediate phases with higher x values (x = 0.7–1). The BET specific surface area of the products increased with x. Moreover, the catalytic activity for soot combustion also increased with x, wherein the BET specific surface area appeared an appropriate index for explaining the observed activity. The sample with x = 0.8 exhibited the highest activity for soot combustion among all the SHS products. The soot combustion temperature of this product was as much as 100 °C lower than that of non-catalytic soot combustion. In other words, it had the same activity as that at only 20 °C higher, in comparison to conventional Pt/Al₂O₃ catalyst. More significantly, average apparent activation energy of sample with x = 0.8 calculated by Friedman method using TG/DTA was approximately 15 kJ/mol lower than that of Pt/Al₂O₃ catalyst. This result suggested that La_1−xSr_xFeO₃ has the possibility to be an alternative catalyst to Pt/Al₂O₃ catalyst.     

Thermoelectric properties of novel skutterudites with didymium: DDy(Fe1−xCox)4Sb12 and DDy(Fe1−xNix)4Sb12

In order to improve the thermoelectric properties via efficient phonon scattering Didymium (DD), a mixture of Pr and Nd, was used as a new filler in ternary skutterudites (Fe_1−xCo_x)₄Sb₁₂ and (Fe_1−xNi_x)₄Sb₁₂. DD-filling levels have been determined from combined data of X-ray powder diffraction and electron microprobe analyses (EMPA). Thermoelectric properties have been characterized by measurements of electrical resistivity, thermopower and thermal conductivity in the temperature range from 4.3 to 800 K. The effect of nanostructuring in DD_0.4Fe₂Co₂Sb₁₂ was elucidated from a comparison of both micro-powder (ground in a WC-mortar, 10 μm) and nano-powder (ball-milled, 150 nm), both hot pressed under identical conditions. The figure of merit ZT depends on the Fe/Co and Ni/Co-contents, respectively, reaching ZT > 1. At low temperatures the nanostructured material exhibits a higher thermoelectric figure of merit. The Vickers hardness was measured for all samples being higher for the nanostructured material.     

Formation and properties of BaxFe3−xO4 with spinel structure by mechanochemical reaction of α-Fe2O3 and BaCO3

Magnetic Ba_xFe_3−xO₄ (x  0.23) with spinel structure was fabricated by ball milling of mixture of BaCO₃ and nonmagnetic α-Fe₂O₃ powders, and the molar ratio of BaCO₃ and α-Fe₂O₃ is 1:6. In the milling process, a mechanochemical reaction took place between BaCO₃ and α-Fe₂O₃, and Ba cation incorporated into α-Fe₂O₃ with rhombohedral structure to form a α-(Fe,Ba)₂O₃ solid solution. The Ba content in the α-(Fe,Ba)₂O₃ increased with increasing milling time, when the Ba content exceeded a limited solubility, the α-(Fe,Ba)₂O₃ transformed into a phase of Ba_xFe_3−xO₄ with spinel structure, where the Ba cation occupied an octahedral site or tetrahedral site. The product obtained in the balling process was different from that prepared in the annealing process at atmospheric pressure, which was BaFe₂O₄ with orthorhombic structure. Accompanying the crystal structure transition from α-(Fe,Ba)₂O₃ to Ba_xFe_3−xO₄, the magnetic properties also changed from nonmagnetism into ferromagnetism. The saturation magnetization was 53.3 emu/g and coercivity was 113.7 Oe. The mechanism of transitions of the crystal structure was discussed in the present work.     

Zinc-deficiency in intermetallics with the NaZn13 type: Re-determination of the crystal structure and physical properties of EuZn13−x (x = 0.25(1))

Reported are the synthesis from zinc flux, crystal structure re-determination from single-crystal X-ray diffraction, and magnetic properties of EuZn_13−x (x = 0.25(1)). It crystallizes in the cubic NaZn₁₃ type (Pearson's symbol cF112, space group , No. 226) with unit cell parameter a = 12.1651(17) Å, determined at 120 K. The structure has two crystallographically unique zinc sites, one of which is partially occupied. This finding is consistent with previous experimental and theoretical work on related Zn-rich networks that suggests an optimal electron count of 27 electrons per formula unit. Temperature-dependent magnetization measurements confirm that the Eu ions in EuZn_12.75(1) are divalent as evidenced from the effective magnetic moment of 7.98μ_B.     

The role of valence electron concentration in the cohesive properties of YBxN1−x, YCxN1−x and YNxO1−x compounds

The mechanical properties are not yet understood at basic levels. Previous works shows that the greatest hardness for rock-salt structures (such as TiC_xN_1−x) is attained for a valence electron concentration (VEC) of 4.2 electrons per atom. The present work is aimed to explore this concept for yttrium-based compounds. By means of first principles calculations we did a systematical investigation where nitrogen in YN (VEC = 4) was supplanted by either of B, C or O to reduce or increase its VEC, forming YB_xN_1−x, YC_xN_1−x and YN_1−xO_x ternary compounds. We have calculated the cohesive energy (E_O), cell volume (V_O), bulk modulus (B_O) and density of states (DoS) as a function of VEC. The Fermi level (E_f,) is shifted toward the valence band by substituting B or C in YN, and toward the conduction band by means of O. It is concluded that the optimal position for E_f (maximum B_O) is linked to the saturation of electronic states with e_g-symmetry. At this point the excess of electrons provided by O starts filling antibonding states with t_2g-symmetry. That is, B_O increases monotonically as a function of VEC until VEC  4.1, after that point B_O decrease.     

Studies on structural and thermal expansion properties of Ho2−xLnxMo4O15 (Ln = Er, Sm and Ce) solid solutions

Three new series of Ho_2−xEr_xMo₄O₁₅ (x = 0.0–2.0), Ho_2−xSm_xMo₄O₁₅ (x = 0.0–0.6) and Ho_2−xCe_xMo₄O₁₅ (x = 0.0–0.25) solid solutions have been prepared successfully by solid-state reaction and studied by powder X-ray diffraction. All the XRD patterns of these molybdates can be indexed in monoclinic space group P2₁/c. Lattice parameters a, b and c of Ho_2−xLn_xMo₄O₁₅ decrease linearly with increasing erbium content and increase with increasing samarium or cerium content. Thermal expansion behaviors of Ho_2−xLn_xMo₄O₁₅ have been investigated in the 25–500 °C temperature range with high-temperature X-ray diffraction. The temperature dependence of Mo(2)–O14 interaction looks like to be responsible for their thermal expansion behaviors.     

Monoclinic phases and stress-relief conditions in (1 − x)Pb(Mg1/3Nb2/3)TiO3–xPbTiO3 solid solutions

A comparative study on heterophase states in perovskite-type solid solutions of (1 − x)Pb(Mg_1/3Nb_2/3)TiO₃–xPbTiO₃ is carried out for compositions near the morphotropic phase boundary. The conditions for mechanical stress relief at elastic matching of phases are analysed at x = const in a wide temperature range. The heterophase states concerned with the presence of the intermediate monoclinic phase are interpreted using the domain state–interface diagrams calculated for x = 0.28, 0.32 and 0.34. It is shown that optimum volume fraction parameters of the domains in the monoclinic phase of the B type are varied in relatively wide ranges and promote complete stress relief with cubic–monoclinic phase coexistence. Two scenarios of stress relief at x = 0.32 are considered in connection with different heterophase states (either tetragonal–monoclinic of the B type or tetragonal–monoclinic of the C type) in a wide temperature range. Possibilities of elastic matching of two polydomain phases (tetragonal–monoclinic of the B type) with almost equal relative widths of the domains in these phases are shown for x = 0.34. The active role of domains of the monoclinic phases in stress relief and forming the planar unstrained interfaces is discussed.     

Magnetic properties of (Fe)1−x–(Al2O3)x and (Fe50Ni50)1−x–(Al2O3)x nanocomposite magnetic media synthesized using gel like Al2O3 matrix

Composites with ferromagnetic nanoparticles, Fe and Fe₅₀Ni₅₀, dispersed in Al₂O₃ have been synthesized by a solution phase technique. The structure and magnetic properties of these composites with varying fractions of Al₂O₃ have been investigated. Both Fe and Fe₅₀Ni₅₀ nanoparticles are amorphous in the as-prepared state and become crystalline on heat treating with near equilibrium lattice parameters of 0.287 nm and 0.358 nm respectively. The interparticle distance increases with increasing Al₂O₃ from 0 wt.% to 20 wt.%. The size of Fe nanoparticles is 40 nm while the Fe₅₀Ni₅₀ nanoparticles are 20 nm in size. The Fe and Fe₅₀Ni₅₀ nanoparticles dispersed composites are found to be ferromagnetic at room temperature both in the as-prepared and heat treated conditions with clear coercive fields of 5.5–35 × 10³ A m⁻¹. The saturation magnetization increases by orders of magnitude on heat treatment, for e.g. from <1.0 emu g⁻¹ to 143.4 emu g⁻¹ for Fe–15 wt.% Al₂O₃ and 95.6 emu g⁻¹ for Fe₅₀Ni₅₀–15 wt.% Al₂O₃. The Fe-composites exhibit a Curie transition at 1000 K while the Fe₅₀Ni₅₀ composites exhibit a transition at 880 K, both temperatures close to bulk values.     

Effect of Yb substitution on microstructure, physical and mechanical properties of negative thermal expansion Zr1−xYbxWMoO8−x/2 (x = 0–0.05) ceramic

Cubic Zr_1−xYb_xWMoO_8−x/2 (x = 0–0.05) ceramic was first fabricated by a polymorphous precursor transition method. X-ray diffraction experiment indicates that samples with x ≤ 0.05 are single phase solid solution. The measured bulk density, microstructure, maximal compression strength and Young's modulus are obviously sensitive to Yb substitution level, while none of such sensitivity was found for the lattice parameters, negative thermal expansion coefficients and Vickers hardness. Drilling tests on Zr_0.96Yb_0.04WMoO_7.98 ceramic indicate good machinability, which is often required for quality and shape control in engineering applications.