共查询到20条相似文献,搜索用时 156 毫秒
1.
介绍了我国油-气路线和油-油路线新工艺炭黑生产装置和生产技术的开发过程、设计原理、工艺和产品特点。概述了我国万吨级新工艺炭黑生产装置的开发过程、建设状况和技术特点。展望了我国新工艺炭黑生产技术和生产装置的发展前景。指出我国新工艺炭黑生产的发展方向是产品多样化、生产装置大型化和自动化。 相似文献
2.
3.
高效规整填料塔技术在苯酐精制过程中的应用 总被引:3,自引:1,他引:2
介绍了国内苯酐精制新工艺和高效规整填料塔技术。实际应用结果表明新工艺比旧有技术和设备提高了产品质量和收率 ,处理能力也大幅提高 ,能耗明显下降。 相似文献
4.
介绍了重芳烃分离装置新工艺和高效规整填料塔技术。实际应用结果表明,新工艺比旧有技术和设备提高了产品质量和收率。 相似文献
5.
概述了发酵法生产甘油的技术进展 ,对现行的两种耐高渗压酵母发酵法工艺进行了比较 ,认为二步发酵法生产甘油新工艺是目前较理想的工艺。并介绍二步发酵法新工艺的基本原理、工艺流程和技术特点 ,探讨新工艺产业化的有关问题 相似文献
6.
7.
简述了乙烯 -醋酸加成制取醋酸乙酯新工艺原理和流程 ;并同醋酸 -乙醇酯化和乙醛缩合制醋酸乙酯生产工艺作比较 ,阐明了新工艺是醋酸乙酯生产中技术先进、经济效益高的生产方法。 相似文献
8.
《合成材料老化与应用》2007,36(1):58
巴西最大的聚烯烃生产商Braskem公司推出新工艺生产PP和PE纳米复合材料。新工艺由Braskem公司在巴西Triunfo的创新和技术中心与巴西Rio Grande do Sul大学开发。初期目标是高功能包装工业。该公司已将该技术在巴西申请了专利。 相似文献
9.
10.
11.
乙苯-苯乙烯分离节能新工艺 总被引:1,自引:0,他引:1
顺序分离恒沸热回收技术是一项乙苯-苯乙烯分离节能新工艺。与相同规模不同分离工艺进行了比较,结果表明,采用该新工艺技术,可以显著降低装置综合能耗,而设备投资略有增加,综合经济效益显著,可用于苯乙烯装置设计与建设。 相似文献
12.
H. A. Chase 《Journal of chemical technology and biotechnology (Oxford, Oxfordshire : 1986)》1986,36(8):351-356
This paper describes the automation of fixed-bed affinity separation techniques for the purification of proteins. The basic requirements of an automated system suitable for carrying out such a separation are detailed together with an introduction to the concept of process optimisation by interactive control. Such systems can continue to optimise separations when operating conditions are variable but require that methods for the on-line analysis of separation performance are available. Such methods require that the levels of particular proteins in the presence of other proteins can be determined and include continuous measurement of enzyme activity and the use of the new technique of rapid chromatographic analysis. The latter technique, which can also be used more generally in the process control of protein purification, is described and its use illustrated. 相似文献
13.
14.
节能型甲基异丙基酮分离工艺研究 总被引:1,自引:0,他引:1
甲基异丙基酮生产中,水与甲基异丙基酮等形成共沸物,文中运用剩余曲线图(RCM)方法对甲基异丙基酮分离过程进行分析研究,根据非均相共沸精馏原理,提出了在丙酮塔中增加油水分离器的方法脱除待分离物系中的水,从而达到节能的目的。文章在Aspen Plus中建立了该节能型甲基异丙基酮分离过程的模拟模型,进行了计算和分析,并加以实验验证,二者比较吻合。结果表明,该分离工艺即节省了设备投资,又降低了分离能耗,并且提高了脱水效率,改善了产品质量,同时还提高了产品收率,所用方法对简化工艺流程起到了积极作用。 相似文献
15.
A mathematical model for high‐flux asymmetric hollow fibre membrane was developed considering the effect of permeate pressure build‐up inside the fibre bore. A new solution technique was developed to solve the model equations, which constitute a boundary value problem. The ordinary differential equations were solved as an initial value problem in two successive steps using the Gear's BDF method. The technique is advantageous since it requires minimum computational time and effort with improved solution stability, and the computational complexity does not multiply as the number of components increases. The model predictions and the robustness of the numerical technique were validated with experimental data for several membrane systems with different flow configurations. The model and the solution technique were applied to evaluate the separation characteristics of air using representative membranes with different configurations, including single‐stage, single‐stage with permeate recycle, single‐stage with retentate recycle, air blending, and two stages in series. The study demonstrates that the new solution technique can conveniently handle the high‐flux hollow fibre membrane problems with different module configurations. © 2011 Canadian Society for Chemical Engineering 相似文献
16.
17.
18.
塔器分离技术最新进展 总被引:5,自引:0,他引:5
介绍了近几年来大型填料塔用新型规整填料、塔内件 (气液分布器、进气初始分布器 )的开发设计和应用 ;国内外新开发的几种新型塔板的技术及工业应用。预计未来塔器分离技术将向行业化、复合化、节能化、大型化方向发展。 相似文献
19.
20.
为了降低空气低温分离过程的设备投资和能耗,在分析空分体系的热力学性质及流程特点的基础上,提出了一种新型的隔壁式空分精馏塔流程。应用Aspen Plus模拟软件,对空气分离的传统流程和隔壁塔流程进行了模拟对比,考察了隔壁式空分精馏塔各结构参数与操作参数对其年总成本的影响,并分析比较了空分传统流程和隔壁式空分精馏塔流程的热力学效率。结果表明,隔壁式空分精馏塔的建模合理可行,通过年总成本优化得到了该隔壁塔的最优结构参数与操作参数,分别为:液氧流量为3 kmol/h,气相分配比(体积比)为0.05,精馏段理论板数为33,侧线精馏段理论板数为30,公共提馏段理论板数为22。与传统空分流程相比,隔壁式空分精馏塔流程的有效能损失降低并且在热力学效率方面高出4.7%。 相似文献