Hydrogen fermentation of different galactose–glucose compositions during various hydraulic retention times (HRTs)

This study investigated the effects of sugar composition and hydraulic retention time (HRT) on continuous hydrogen fermentation. Continuously-stirred tank reactors (CSTRs) were inoculated with heat-treated digester sludge and fed with 15 g/L of glucose, galactose and galactose: glucose mixture (8:2 ratio-simulating the hydrolysate composition of macroalgae) at HRTs of 6–24 h. Peak hydrogen production rate (HPR) and hydrogen yield (HY) of 4.49 L/L/d and 1.62 mol/mol glucose_added were attained while using glucose as feedstock at HRTs of 6 and 18 h, respectively. Meanwhile, galactose provided a peak HPR and HY of 2.35 L/L/d and 1.00 mol/mol galactose_added during the HRTs of 12 and 24 h, respectively. In case of mixed sugars (galactose 8: glucose 2) the production performances were inferior to the sole sugar conditions due to the low substrate utilization of less than 65%, which showed a maximal HPR and HY of 2.75 L/L/d and 0.48 mol/mol carbohydrate_added at the HRTs of 6 and 18 h, respectively.     

Non-sterile bio-hydrogen fermentation from food waste in a continuous stirred tank reactor (CSTR): Performance and population analysis

Bio-hydrogen production from food waste by anaerobic mixed cultures was conducted in a continuous stirred tank reactor (CSTR). The hydraulic retention time (HRT) was optimized in order to maximize hydrogen yield (HY) and hydrogen production rate (HPR). The maximum hydrogen content (38.6%), HPR (379 mL H₂/L. d) and HY (261 mL H₂/g-VS_added) were achieved at the optimum HRT of 60 h. The major soluble metabolite products were butyric and acetic acids which indicated a butyrate-acetate type fermentation. Operation of CSTR at HRT 60 h could select hydrogen producing bacteria and eliminate lactic acid bacteria and acetogenic bacteria. The microbial community analyzed by polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE) revealed that the predominant hydrogen producer was Clostridium sp.     

Effect of hydraulic retention time on a continuous biohydrogen production in a packed bed biofilm reactor with recirculation flow of the liquid phase

The present paper reports on results obtained from experiments carried out in a laboratory-scale anaerobic packed bed biofilm reactor (APBR), with recirculation of the liquid phase, for continuously biohydrogen production via dark fermentation. The reactor was filled with Kaldnes^® biofilm carrier and inoculated with an anaerobic mesophilic sludge from a urban wastewater treatment plant (WWTP). The APBR was operated at a temperature of 37 °C, without pH buffering. The effect of theoretical hydraulic retention time (HRT) from 1 to 5 h on hydrogen yield (HY), hydrogen production rate (HPR), substrate conversion and metabolic pathways was investigated. This study indicates the possibility of enhancing hydrogen production by using APBR with recirculation flow. Among respondents values of HRT the highest average values of HY (2.35 mol H₂/mol substrate) and HPR (0.085 L h^?1L^?1) have been obtained at HRT equal to 2 h.     

Continuous production of hydrogen from oat straw hydrolysate in a biotrickling filter

Hydrogen was produced in a biotrickling filter (BF) packed with perlite and fed with oat straw acid hydrolysate at 30 °C. Inlet chemical oxygen demand (COD) from 1.2 to 35 g/L and hydraulic retention time (HRT) between 24 h and 6 h were assayed. With increasing inlet COD or decreasing HRT, H₂ production rate (HPR) increased but H₂ production yield (HY) decreased. Maximum HPR of 81.4 mL H₂/L_reactor h (3.3 mmol H₂/L_reactor h) and HY of 2.9 mol H₂/mol_{hexose consumed} were found at an inlet COD of 0.05 g_COD/L h (HRT 24 h) and 2.9 g_COD/L h (HRT 12 h), respectively. Maximum hydrogen composition in gas was 45 ± 4% (v/v) with CO₂ as balance. Methane was not detected. Maximum HPR and inlet COD used in this work were higher than others reported for reactors with suspended or fixed biomass. However, implementation of strategies for biomass control to avoid reactor clogging is needed.     

Evaluation of process performance on biohydrogen production in continuous fixed bed reactor (C-FBR) using acid algae hydrolysate (AAH) as feedstock

In this study, a novel inoculation method to mitigate the inhibition of 5-hydroxymethylfurfural (5-HMF) is proposed. Acid algae hydrolysate containing 1.5 g 5-HMF/L and 15 g hexose/L hexose was fed to a continuous fixed bed reactor (C-FBR) partially packed with hybrid-immobilized beads. The inoculation method enabled a high rate of H₂ production, due to the reduction of 5-HMF inhibition and enhanced biofilm formation. Maximum hydrogen production was achieved at a hydraulic retention time of 6 h with a hydrogen production rate (HPR) of 20.0 ± 3.3 L H₂/L-d and a hydrogen yield (HY) of 2.3 ± 0.4 mol H₂/mol hexose _added. Butyrate and acetate were the major soluble metabolic products released during fermentation. Quantitative real-time polymerase chain reaction analysis revealed that Clostridium butyricum comprised 94.3% of the total bacteria, which was attributed to the high rate of biohydrogen production.     

Enhanced bio-hydrogen production from sugarcane juice by immobilized Clostridium butyricum on sugarcane bagasse

Immobilized Clostridium butyricum TISTR 1032 on sugarcane bagasse improved hydrogen production rate (HPR) approximately 1.2 times in comparison to free cells. The optimum conditions for hydrogen production by immobilized C. butyricum were initial pH 6.5 and initial sucrose concentration of 25 g COD/L. The maximum HPR and hydrogen yield (HY) of 3.11 L H₂/L substrate·d and 1.34 mol H₂/mol hexose consumed, respectively, were obtained. Results from repeated batch fermentation indicated that the highest HPR of 3.5 L H₂/L substrate·d and the highest HY of 1.52 mol H₂/mol hexose consumed were obtained at the medium replacement ratio of 75% and 50% respectively. The major soluble metabolites in both batch and repeated batch fermentation were butyric and acetic acids.     

Fermentative hydrogen production from starch using natural mixed cultures

Batch and continuous tests were conducted to evaluate fermentative hydrogen production from starch (at a concentration of chemical oxygen demand (COD) 20 g/L) at 35 °C by a natural mixed culture of paper mill wastewater treatment sludge. The optimal initial cultivation pH (tested range 5–7) and substrate concentration (tested range 5–60-gCOD/L) were evaluated by batch reactors while the effects of hydraulic retention time (HRT) on hydrogen production, as expressed by hydrogen yield (HY) and hydrogen production rate (HPR), were evaluated by continuous tests. The experimental results indicate that the initial cultivation pH markedly affected HY, maximum HPR, liquid fermentation product concentration and distribution, butyrate/acetate concentration ratio and metabolic pathway. The optimal initial cultivation pH was 5.5 with peak values of HY 1.1 mol-H₂/mol-hexose maximum HPR 10.4 mmol-H₂/L/h and butyrate concentration 7700 mg-COD/L. In continuous hydrogen fermentation, the optimal HRT was 4 h with peak HY of 1.5 mol-H₂/mol-hexose, peak HPR of 450 mmol-H₂/L/d and lowest butyrate concentration of 3000 mg-COD/L. The HPR obtained was 280% higher than reported values. A shift in dominant hydrogen-producing microbial population along with HRT variation was observed with Clostridium butyricum, C. pasteurianum, Klebshilla pneumoniae, Streptococcus sp., and Pseudomonas sp. being present at efficient hydrogen production at the HRTs of 4–6 h. Strategies based on the experimental results for optimal hydrogen production from starch are proposed.     

Converting waste molasses liquor into biohydrogen via dark fermentation using a continuous bioreactor

This study investigated the effects of substrate concentration, HRT (hydraulic retention time), and pre-treatment of the substrate molasses on biohydrogen production from waste molasses (condensed molasses fermentation solubles, CMS) with a CSTR (continuously-stirred tank reactor). First, the hydrogen production was performed with various CMS concentrations (40–90 g COD/L, total sugar 8.7–22.6 g/L) with 6 h HRT. The results show that the maximal hydrogen production rate (HPR) occurred at 80 g COD/L substrate (19.8 g ToSu/L, ToSu: Total Sugar), obtaining an HPR of 0.417 mol/L/d. However, maximum hydrogen yield (HY) of 1.44 mol H₂/mol hexose and overall hydrogen production efficiency (HPE) of 25.6% were achieved with a CMS concentration of 70 g COD/L (17.3 g ToSu/L). The substrate inhibition occurred when CMS concentration was increased to 90 g COD/L (22.6 g ToSu/L). Furthermore, it was observed that the optimal HPR, HY, and HPE all occurred at HRT 6 h. Operating at a lower HRT of 4 h decreased the hydrogen production performance because of lower substrate utilization efficiency. The employment of pre-heating treatment (60 °C for 1 h) of the substrate could markedly enhance the fermentation performance. With 6 h HRT and substrate pre-heating treatment, the HPE raised to 29.9%, which is 18% higher than that obtained without thermal pretreatment.     

Effect of pre-treatment and hydraulic retention time on biohydrogen production from organic wastes

This study investigated the effect of pre-treatment and hydraulic retention time (HRT) on biohydrogen production from organic wastes. Various pre-treatments including thermal, base, acid, ultrasonication, and hydrogen peroxide were applied alone or in combination to enhance biohydrogen production from potato and bean wastewater in batch tests. All the pre-treated samples showed higher hydrogen production than the control tests. Hydrogen peroxide pre-treatment achieved the best results of 939.7 and 470 mL for potato and bean wastewater, respectively. Continuous biohydrogen production from sucrose, potato and bean wastewater was significantly influenced by reducing the HRT as 24, 18 and 12 h. Sucrose and potato showed similar behavior, where the hydrogen production rate (HPR) increased with decreasing the HRT. Optimum hydrogen yield results of 320 mL-H₂/g-VS (sucrose) and 150 mL-H₂/g-VS (potato) were achieved at HRT of 18 h. Bean wastewater showed optimum HPR of 0.65 L/L.d with hydrogen yield of 80 mL-H₂/g-VS at 24 h HRT.     

Influence of C/P and C/N ratios and microbial characterization in hydrogen and ethanol production in an anaerobic fluidized bed reactor

The aim of this study was to evaluate the influence of C/P and C/N ratios on the production of hydrogen and ethanol in four anaerobic fluidized bed reactors: R1 (C/N = 100), R2 (C/N = 150), R3 (C/N = 200), and R4 (C/N = 250). The hydraulic retention time (HRT) was maintained at 2 h, and the C/P ratios varied from 300 to 1100. Reactors were filled with grounded tire and fed with synthetic substrate containing glucose (5000 mg L^?1). The effluent pH was around 3.7. The highest values for hydrogen yield (HY) and hydrogen production rate (HPR) were obtained at a C/P = 700 ratio in all reactors. The best performance was achieved at R3 (C/N = 200): HY of 0.76 mol H₂ mol^?1 glucose and HPR of 0.70 L h^?1 L^?1. The highest value for ethanol yield was obtained at C/P = 700 in R1 (1.5 mol EtOH mol^?1 glucose). Ethanol- and hydrogen-producing fermenters, such as Ethanoligenens sp. and Clostridium sp. were identified by molecular analysis. Lactobacillus sp. was also identified in this study.     

Continuous hydrogen production from cofermentation of sugarcane vinasse and cheese whey in a thermophilic anaerobic fluidized bed reactor

The co-fermentation of vinasse and cheese whey (CW) was evaluated in this study by using two thermophilic (55° C) anaerobic fluidized bed reactors (AFBRs). In AFBR using vinasse and CW (AFBR-V-CW), the CW was added in increasing proportions (2, 4, 6, 8, and 10 g COD.L^?1) to vinasse (10 g COD.L^?1) to assess the advantage of adding CW to vinasse. By decreasing the hydraulic retention time (HRT) from 8 h to 1 h in AFBR-V, maximum hydrogen yield (HY), production rate (HPR), and H₂ content (H₂%) of 1.01 ± 0.06 mmol H₂.g COD^?1, 2.54 ± 0.39 L H₂.d^?1.L^?1, and 47.3 ± 2.9%, respectively, were observed at an HRT of 6 h. The increase in CW concentration to values over 2 g COD.L^?1 in AFBR-V-CW decreased the HY, PVH, and H₂%, with observed maximum values of 0.82 ± 0.07 mmol H₂.g COD^?1, 1.41 ± 0.24 L H₂.d^?1.L^?1, and 55.5 ± 3.7%, respectively, at an HRT of 8 h. The comparison of AFBR-V-CW and AFBR-V showed that the co-fermentation of vinasse with 2 g COD.L^?1 of CW increased the HPR, H₂%, and HY by 117%, 68%, and 82%, respectively.     

Biohydrogen production from crude glycerol by immobilized Klebsiella sp. TR17 in a UASB reactor and bacterial quantification under non-sterile conditions

Biohydrogen production from crude glycerol by immobilized Klebsiella sp. TR17 was investigated in an up-flow anaerobic sludge blanket (UASB) reactor. The reactor was operated under non-sterile conditions at 40^○C and initial pH 8.0 at different hydraulic retention times (HRTs) (2–12 h) and glycerol concentrations (10–30 g/L). Decreasing the HRT led to an increase in hydrogen production rate (HPR) and hydrogen yield (HY). The highest HPR of 242.15 mmol H₂/L/d and HY of 44.27 mmol H₂/g glycerol consumed were achieved at 4 h HRT and glycerol concentrations of 30 and 10 g/L, respectively. The main soluble metabolite was 1,3-propanediol, which implies that Klebsiella sp. was dominant among other microorganisms. Fluorescence in situ hybridization (FISH) revealed that the microbial community was dominated by Klebsiella sp. with 56.96, 59.45, and 63.47% of total DAPI binding cells, at glycerol concentrations of 10, 20, and 30 g/L, respectively.     

Continuous hydrogen production from tofu processing waste using anaerobic mixed microflora under thermophilic conditions

We carried out continuous fermentative H₂ production from tofu (soybean curd)-processing waste (TPW) using anaerobic mixed microflora under thermophilic (60 °C) conditions and compared the rates and yields of H₂ production in a continuous stirred-tank reactor (CSTR) and a membrane bioreactor (MBR), wherein the membrane filtration unit was coupled to the CSTR. The TPW was diluted with tap water and then hydrolyzed by blending for 5 min in the presence of 0.5% HCl, and it was found that this protocol significantly increased the amount of soluble material in the mixture. The soluble chemical oxygen demand (SCOD)-to-total COD (TCOD) ratio jumped from 14% to 60%, and the soluble carbohydrate concentration was increased threefold, from 2.4 g/L to 7.2 g/L. Accordingly, H₂ production potential was increased 2.8-fold. In a CSTR operation using pretreated TPW as the substrate, a stable volumetric H₂ production rate (VHPR) of 8.17 ± 0.32 L H₂/L/d and a H₂ yield of 1.20 ± 0.05 mol H₂/mol hexose_added at 8-h HRT were achieved. Substantial increases in the VHPR and H₂ yield over those obtained with the CSTR were observed in the MBR operation. The role of the MBR was to increase the retention time of the solid substrate and the concentration of microorganisms, thereby enhancing the substrate utilization rate for H₂ production. Acetic and butyric acids were the main liquid-state metabolites produced during the fermentation process, thus indicating that the thermophilic operation provided favorable conditions for H₂ production from TPW. A maximum H₂ yield of 1.87 mol H₂/mol hexose_added was achieved at 8-h HRT and then gradually decreased to 1.00 mol H₂/mol hexose-equivalent at 2-h HRT. Meanwhile, the VHPR continuously increased to a maximum of 19.86 L H₂/L/d at 4-h HRT and then decreased with a high dilution rate as the HRT was lowered to 2 h (minimum). At 2-h HRT, the degradation of soluble carbohydrate was limited.     

Enhancing the performance of dark fermentative hydrogen production using a reduced pressure fermentation strategy

The partial pressure of hydrogen is an extremely important factor for hydrogen generation. This study investigated the effect of reduced pressure (via vacuum) on hydrogen production in a CSTR reactor. The results show that the reduced pressure condition is more effective in enhancing H₂ production at lower HRT (e.g., 8–4 h) than at higher HRT (e.g., 12 h). The optimal hydrogen yield and overall hydrogen production efficiency occurred at a HRT of 6 h with a value of 4.50 mol H₂/mol sucrose and 56.2%, respectively. Meanwhile, at HRT 6 h the hydrogen production rate was 0.937 mol/L/d. In addition, the HPR could be further improved to 1.196 mol/L/d when the HRT was shortened to 4 h, obtaining a 37–271% increase in HPR when compared with that described in the relevant reports. For all experiments, butyrate and acetate were the two primary soluble metabolites, accounting for 85–99% of total soluble microbial products. Predominant production of acetate and butyrate demonstrates the efficient H₂ fermentation with reduced pressure processes.     

Dark fermentative hydrogen production from sucrose and molasses

There are many factors affecting the dark fermentative hydrogen production. The interaction of these factors, that is, their combined effects, should be investigated for better design of the systems with stable and higher hydrogen yields. This study aimed to investigate the combined effects of initial substrate, pH, and biomass (or initial substrate to biomass) values on hydrogen production from sucrose and sugar‐beet molasses. Therefore, optimum initial chemical oxygen demand (COD), pH, and volatile suspended solids (VSS) or initial substrate to biomass (VSS) ratio (S/X_o) values leading to the highest dark fermentative hydrogen production were investigated in batch reactors. An experimental design approach (response surface methodology) was used. Results revealed that when sucrose was the substrate, maximum hydrogen production yield (HY) of 2.3 mol H₂/mol sucrose_added was obtained at initial pH of 7 and COD of 10 g/L. Initial S/X_o values studied (4–20 g COD/g VSS) had no effect on HY, while the initial pH was found as the parameter mostly affecting both HY and hydrogen production rate (HPR). When substrate was molasses, initial COD concentration was the only variable affecting HY and HPR. Maximum of both was achieved at 10 g/L initial COD. Initial VSS values studied (2.5–7.5 g/L) had no effect on HPR and HY. This study also indicated that molasses leads to homoacetogenesis for potentially containing intrinsic microorganism and/or natural constituents; thus, sucrose is more advantageous for hydrogen production via fermentation. Homoacetogenesis should be prevented for effective optimization via response surface methodology, if substrate is a natural carbon source potential to have intrinsic microorganisms. Copyright © 2017 John Wiley & Sons, Ltd.     

Effects of substrate concentration and hydraulic retention time on hydrogen production from common reed by enriched mixed culture in continuous anaerobic bioreactor

This study aims to investigate the effect of substrate concentration and hydraulic retention time (HRT) on hydrogen production in a continuous anaerobic bioreactor from unhydrolyzed common reed (Phragmites australis) an invasive wetland and perennial grass. The bioreactor has capacity of 1 L and working volume of 600 mL. It was operated at pH 5.5, temperature at 37 °C, hydraulic retention time (HRT) 12 h, and variation of substrate concentration from 40, 50, and 60 g COD/L, respectively. Afterward, the HRT was then varied from 12, 8, to 4 h for checking the optimal biohydrogen production. Each condition was run until reach steady state on hydrogen production rate (HPR) which based on hydrogen percentage and daily volume. The results were obtained the peak of substrate concentration was at the 50 g COD/L with HRT 12 h, average HPR and H₂ concentration were 28.71 mL/L/h and 36.29%, respectively. The hydrogen yield was achieved at 106.23 mL H₂/g CODre. The substrate concentration was controlled at 50 g COD/L for the optimal HRT experiments. It was found that the maximum of average HPR and H₂ concentration were 43.28 mL/L/h and 36.96%, respectively peak at HRT 8 h with the corresponding hydrogen yield of 144.35 mL H₂/g CODre. Finally, this study successful produce hydrogen from unhydrolyzed common reed by enriched mixed culture in continuous anaerobic bioreactor.     

Enhanced biohydrogen production from tofu residue by acid/base pretreatment and sewage sludge addition

Anaerobic dark fermentation is considered a promising technology for clean energy production and waste reduction. In the present work, tofu residue and sewage sludge were utilized as substrates for fermentative hydrogen production. To increase the biodegradability, tofu residue was pretreated for 30 min in the presence of HCl and NaOH at various concentrations (0, 0.5, 1.0, and 2.0%), and then fermented by a thermophilic (60 °C) mixed culture. The solubility (SCOD/TCOD ratio) of the tofu residue increased from 4 to 30–40% after pretreatment, and the increased soluble constituents were mainly protein rather than carbohydrate compounds. However, in spite of a slight increase of carbohydrate solubility, the H₂ production performance was significantly enhanced by pretreatment, owing to the degradability of thermophilic cultures used on insoluble tofu residues. The limited H₂ yield of 0.30 mol H₂/mol hexose_added achieved in the raw tofu residue was increased 1.6- to 4-fold with the highest H₂ yield of 1.25 mol H₂/mol hexose_added at 1.0% HCl concentration. Carbohydrate degradation and the H₂ production rate also increased from 39 to 50–65% and 27 to 50–120 mL H₂/L/h, respectively. The role of pretreatment was not only to increase the biodegradability but also to suppress the activity of indigenous non H₂-producers such as lactic acid bacteria and propionic acid bacteria. When sewage sludge was added to acid pretreated (1.0% HCl) tofu residue as a co-substrate, the H₂ yield and H₂ production rate increased to 1.48 mol H₂/mol hexose_added and 161 mL H₂/L/h, respectively, which was attributed to the abundant minerals, vitamins, and metals contained in sewage sludge.     

Simultaneous saccharification and fermentation of cellulose for bio-hydrogen production by anaerobic mixed cultures in elephant dung

The objective of this study was to optimize the culture conditions for simultaneous saccharification and fermentation (SSF) of cellulose for bio-hydrogen production by anaerobic mixed cultures in elephant dung under thermophilic temperature. Carboxymethyl cellulose (CMC) was used as the model substrate. The investigated parameters included initial pH, temperature and substrate concentration. The experimental results showed that maximum hydrogen yield (HY) and hydrogen production rate (HPR) of 7.22 ± 0.62 mmol H₂/g CMC_added and 73.4 ± 3.8 mL H₂/L h, respectively, were achieved at an initial pH of 7.0, temperature of 55 °C and CMC concentration of 0.25 g/L. The optimum conditions were then used to produce hydrogen from the cellulose fraction of sugarcane bagasse (SCB) at a concentration of 0.40 g/L (equivalent to 0.25 g/L cellulose) in which an HY of 7.10 ± 3.22 mmol H₂/g cellulose_added. The pre-dominant hydrogen producers analyzed by polymerase chain reaction-denaturing gel gradient electrophoresis (PCR-DGGE) were Thermoanaerobacterium thermosaccharolyticum and Clostridium sp. The lower HY obtained when the cellulose fraction of SCB was used as the substrate might be due to the presence of lignin in the SCB as well as the presence of Lactobacillus parabuchneri and Lactobacillus rhamnosus in the hydrogen fermentation broth.     

Direct fermentation of Laminaria japonica for biohydrogen production by anaerobic mixed cultures

A few studies have been made on fermentative hydrogen production from marine algae, despite of their advantages compared with other biomass substrates. In this study, fermentative hydrogen production from Laminaria japonica (one brown algae species) was investigated under mesophilic condition (35 ± 1 °C) without any pretreatment method. A feasibility test was first conducted through a series of batch cultivations, and 0.92 mol H₂/mol hexose_added, or 71.4 ml H₂/g TS of hydrogen yield was achieved at a substrate concentration of 20 g COD/L (based on carbohydrate), initial pH of 7.5, and cultivation pH of 5.5. Continuous operation for a period of 80 days was then carried out using anaerobic sequencing batch reactor (ASBR) with a hydraulic retention time (HRT) of 6 days. After operation for approximately 30 days, a stable hydrogen yield of 0.79 ± 0.03 mol H₂/mol hexose_added was obtained. To optimize bioenergy recovery from L. japonica, an up-flow anaerobic sludge blanket reactor (UASBr) was applied to treat hydrogen fermentation effluent (HFE) for methane production. A maximum methane yield of 309 ± 12 ml CH₄/g COD was achieved during the 90 days operation period, where the organic loading rate (OLR) was 3.5 g COD/L/d.     

Biohydrogen production from palm oil mill effluent (POME) by two stage anaerobic sequencing batch reactor (ASBR) system for better utilization of carbon sources in POME

The production of biohydrogen through dark fermentation of palm oil mill effluent (POME) was evaluated in two-stages of biohydrogen in an anaerobic sequencing batch reactor (ASBR) system using enriched mixed culture for the first time. This study attempts to examine the effect of HRT and its interaction behavior with the solid retention time (SRT), and the sugar consumption. The effluent after discharged from the thermophilic reactor contained 7.61 g/L TC and 22.87 g/L TSS was fed to the secondary mesophilic reactor system. Results indicated that the overall sugar consumption reached 88.62% at the optimum HRT of 12 h with the SRT set to 20 h. The optimum hydrogen yield and HPR in the thermophilic stage were 2.99 mol H₂/mol-sugar and 8.54 mmol H₂/L·h respectively, while for the mesophilic stage were 1.19 mol H₂/mol-sugar and 1.47 mmolH₂/L·h respectively. The overall HPR showed an improvement and increase from 8.54 mmol H₂/L·h to 10.34 mmol H₂/L.h. Microbial community analysis of mixed culture in the two-stage thermophilic (55.0 °C) and mesophilic (37.0 °C) ASBR reactor was dominated by Thermoanaerobacterium sp. based on the PCR-DGGE technique.