Reducing cyclic variation of a gasoline rotary engine by hydrogen addition under various operating conditions

In the present paper, the cyclic variations of a hydrogen-blended gasoline rotary engine operated under various conditions were experimentally investigated. The experiments were carried out on a modified hydrogen-gasoline dual-fuel rotary engine equipped with an electronically-controlled fuel injection system. An electronic control module was specially made to command the fuel injection, excess air ratio and hydrogen volumetric fraction. The tested engine was first run at idle condition with a speed of 2400 rpm and then operated at 4500 rpm to investigate the cyclic variations of a hydrogen-enriched gasoline rotary engine under different hydrogen volumetric percentages in the total intake, excess air ratios and spark timings. The experimental results demonstrated that the coefficient of variations (in peak pressure, engine speed, flame development period and flame propagation period) of the gasoline rotary engine were distinctly decreased with the increase of hydrogen volume fraction under all the tested conditions. In particular, at idle and stoichiometric conditions, the coefficient of variation in CA0-10 and CA10-90 were reduced from 9.25% to 5.01%, 15.40% to 8.70%, respectively.     

Improving the combustion performance of a gasoline rotary engine by hydrogen enrichment at various conditions

The combustion process within the cylinder directly influences the thermal efficiency and performance of the engines. As for the rotary engine, the long-narrow combustion chamber prevents the mixture from fully burning, which worsens the performance of the rotary engine. As a fuel with excellent properties, hydrogen can improve the combustion of the original engine. In this paper, improvements in combustion of a gasoline rotary engine by hydrogen supplement under different operating conditions were experimentally investigated. The experiment was conducted on a modified hydrogen-gasoline dual-fuel rotary engine equipped with an electronically-controlled fuel injection system. An electronic control module was specially made to command the fuel injection, excess air ratio and hydrogen volumetric fraction. Integral heat release fraction (IHRF) was employed to evaluate the combustion of the tested engine. The tested engine was first run at the idle speed of 2400 rpm and then operated at 4500 rpm to investigate the combustion of the hydrogen-blended gasoline rotary engine under different hydrogen volume fractions, excess air ratios and spark timings. The testing results demonstrated that the combustion of the gasoline rotary engine were all improved when the hydrogen was blended into the chamber under all tested conditions.     

A comparative study on performance of the rotary engine fueled hydrogen/gasoline and hydrogen/n-butanol

The comparative study on performance of the hydrogen/gasoline and hydrogen/n-butanol rotary engines was conducted in the present paper. Considering the stable operation of the engine, for both hydrogen/gasoline case and hydrogen/n-butanol case, the operating conditions were set at: 4000 rpm (engine speed), 35 kPa (intake pressure) and 30 °CA BTDC (spark timing). The total excess air ratio of mixture was maintained at 1.0 through all the tests. The testing results displayed that hydrogen enrichment improved performance of both gasoline and n-butanol rotary engines. To be more specific, brake thermal efficiency was increased, flame development and propagation periods were shortened, the coefficient of variation in flame propagation period was decreased, and the emissions of HC and CO were decreased. NOx emissions were mildly increased after hydrogen addition. Besides, hydrogen/n-butanol rotary engine possessed the similar performance to hydrogen/gasoline rotary engine.     

The effect of engine speed and cylinder-to-cylinder variations on backfire in a hydrogen-fueled internal combustion engine

The port-injection-type hydrogen engine is advantaged in that hydrogen gas is injected into the intake pipe through a low-pressure fuel injector, and the mixing period with air is sufficient to produce uniform mixing, improving the thermal efficiency. A drawback is that the flame backfires in the intake manifold, reducing the engine output because the amount of intake air is reduced, owing to the large volume of hydrogen. Here, the backfire mechanism as a part of the development of full-load output capability is investigated, and a 2.4-liter reciprocating gasoline engine is modified to a hydrogen engine with a hydrogen supply system. To secure the stability and output performance of the hydrogen engine, the excess air ratio was controlled with a universal engine control unit.The torque, excess air ratio, hydrogen fuel, and intake air flow rate changes in time were compared under low- and high-engine speed conditions with a wide-open throttle. The excess air ratio depends on the change in the fuel amount when the throttle is completely opened, and excess air ratio increase leads to fuel/air-mixture dilution by the surplus air in the cylinder. As the engine speed increases, the maximum torque decreases because the excess air ratio continues to increase due to the occurrence of the backfire. The exhaust gas temperature also increases, except at an engine speed of 6000 rpm. Furthermore, the increase in exhaust gas temperature affects the backfire occurrence. At 2000 rpm, under low-speed and wide-open throttle conditions, backfire first occurs in the No. 4 cylinder because the mixture is heated by the relatively high port temperature. In contrast, at 6000 rpm, under high-speed and wide-open throttle conditions, the backfire starts at the No. 2 cylinder first because of a higher exhaust gas temperature, resulting in a lower excess air ratio in cylinders 2 and 3, located at the center of the engine.     

Study on combustion and emission characteristics of a n-butanol engine with hydrogen direct injection under lean burn conditions

The n-butanol fuel, as a renewable and clean biofuel, could ease the energy crisis and decrease the harmful emissions. As another clean and renewable energy, hydrogen properly offset the high HC emissions and the insufficient of dynamic property of pure n-butanol fuel in SI engines, because of the high diffusion coefficient, high adiabatic flame velocity and low heat value. Hydrogen direct injection not only avoids backfire and lower intake efficiency but also promotes to form in-cylinder stratified mixture, which is helpful to enhance combustion and reduce emissions. This experimental study focused on the combustion and emissions characteristics of a hydrogen direct injection stratified n-butanol engine. Three different hydrogen addition fractions (0%, 2.5%, 5%) were used under five different spark timing (10° ,15° ,20° ,25° ,30° CA BTDC). Engine speed and excess air ratio stabled at 1500 rpm and 1.2 respectively. The direct injection timing of the hydrogen was optimized to form a beter stratified mixture. The obtained results demonstrated that brake power and brake thermal efficiency are increased by addition hydrogen directly injected. The BSFC is decreased with the addition of hydrogen. The peak cylinder pressure and the instantaneous heat release rate raises with the increase of the hydrogen addition fraction. In addition, the HC and CO emissions drop while the NOx emissions sharply rise with the addition of hydrogen. As a whole, with hydrogen direct injection, the power and fuel economy performance of n-butanol engine are markedly improved, harmful emissions are partly decreased.     

A comparative study on effects of homogeneous or stratified hydrogen on combustion and emissions of a gasoline/hydrogen SI engine

A comparative study on effects of homogeneous or stratified hydrogen on combustion and emissions was presented for a gasoline/hydrogen SI engine. Three kinds of injection modes (gasoline, gasoline plus homogeneous hydrogen and gasoline plus stratified hydrogen) and five excess air ratios were applied at low speed and low load on a dual fuel SI engine with hydrogen direct injection (HDI) and gasoline port injection. The results showed that, with the increase of excess air ratio, the brake thermal efficiency increases firstly then decreases and reaches the highest when the excess air ratio is 1.1. In comparison with pure gasoline, hydrogen addition can make the ignition stable and speed up combustion rate to improve the brake thermal efficiency especially under lean burn condition. Furthermore, it can reduce the CO and HC emissions because of more complete combustion, but produce more NO_X emissions due to the higher combustion temperature. Since, in the gasoline plus stratified hydrogen mode, the hydrogen concentration near the sparking plug is denser than that of homogeneous hydrogen, the ignition is more stable and faster, which further speed up the combustion rate and improve the brake thermal efficiency. In the gasoline plus stratified hydrogen mode, the brake thermal efficiency increases by 0.55%, the flame development duration decreases by 1.0°CA, rapid combustion duration decreases by 1.3°CA and the coefficient of variation (COV) decreases by 9.8% on average than that of homogeneous hydrogen. However, in the gasoline plus stratified hydrogen mode, due to the denser hydrogen concentration near the sparking plug and leaner hydrogen concentration near the wall, the combustion temperature and the wall quenching distance increase, which make the NO_X and HC emissions increase by 14.3% and 12.8% on average than that of homogeneous hydrogen.     

Comparison of the performance of a spark-ignited gasoline engine blended with hydrogen and hydrogen–oxygen mixtures

This paper compared the effects of hydrogen and hydrogen–oxygen blends (hydroxygen) additions on the performance of a gasoline engine at 1400 rpm and a manifolds absolute pressure of 61.5 kPa. The tests were carried out on a 1.6 L gasoline engine equipped with a hydrogen and oxygen injection system. A hybrid electronic control unit was applied to adjust the hydrogen and hydroxygen volume fractions in the intake increasing from 0% to about 3% and keep the hydrogen-to-oxygen mole ratio at 2:1 in hydroxygen tests. For each testing condition, the gasoline flow rate was adjusted to maintain the mixture global excess air ratio at 1.00. The test results confirmed that engine fuel energy flow rate was decreased after hydrogen addition but increased with hydroxygen blending. When hydrogen or hydroxygen volume fraction in the intake was lower than 2%, the hydroxygen-blended gasoline engine produced a higher thermal efficiency than the hydrogen-blended gasoline engine. Both the additions of hydrogen and hydroxygen help reduce flame development and propagation periods of the gasoline engine. HC emissions were reduced whereas NOx emissions were raised with the increase of hydrogen and hydroxygen addition levels. CO was slightly increased after hydrogen blending, but reduced with hydroxygen addition.     

Effect of spark timing on the performance of a hybrid hydrogen–gasoline engine at lean conditions

Hydrogen addition is an effective way for improving the performance of spark-ignited (SI) engines at stoichiometric and especially lean conditions. Spark timing also heavily influences the SI engine performance. This paper experimentally investigated the effect of spark timing on performance of a hydrogen-enriched gasoline engine at lean conditions. The experiment was carried out on a four-cylinder, port-injection gasoline engine which was modified to be an electronically controlled hybrid hydrogen–gasoline engine (HHGE) by adding a hydrogen port-injection system on the intake manifolds while keeping the original gasoline injection system unchanged. A hybrid electronic control unit (HECU) was developed to govern the injection timings and durations of hydrogen and gasoline to enforce the timely mixing of hydrogen and gasoline in the intake ports at the expected blending levels and excess air ratios. During the test, the engine speed was fixed at 1400 rpm and the manifolds absolute pressure (MAP) was kept at 61.5 kPa. The hydrogen volume fraction in the intake was increased from 0% to 3% through adjusting the hydrogen injection duration. For a specified hydrogen addition level, gasoline injection duration was reduced to ensure the engine operating at two excess air ratios of 1.2 and 1.4, respectively. The spark timing for a specified hydrogen addition level and excess air ratio was varied from 20 to 50 °CA BTDC with an interval of 2 °CA. The test results showed that the indicated mean effective pressure (Imep) first increased and then decreased with the increase of spark advance. The optimum spark timing for the max. Imep (OST) was retarded for the HHGE at a specified excess air ratio. The max. indicated thermal efficiency appeared at the OST. Flame development period was shortened whereas flame propagation period was prolonged with the decrease of spark advance. The coefficient of variation in indicated mean effective pressure generally gained its minimum value at the OST. HC and NOx emissions were continuously decreased with the retarding of spark timing. However, the effect of spark timing on CO emission was found insignificant.     

Combined Effect of Air Intake Method and Hydrogen Injection Timing on Airflow Movement and Mixture Formation in a hydrogen direct injection rotary engine

The hydrogen rotary engine (HRE) has advantages of the high power-to-weight ratio and low emission performance. In this study, a three-dimensional dynamic simulation model of the hydrogen direct injection rotary engine is established, and the accuracy and reliability of the gas nozzle injection model are verified based on experimental data in detail. Then, the combined effects of the air intake method (AIM) and hydrogen injection timing (HIT) on airflow movement and mixture formation processes in the HRE are investigated. The numerical results show that the compound AIM improves the engine volumetric efficiency due to more air entering. As for air movement, the average airflow velocity and turbulent kinetic energy both increase significantly during hydrogen injection duration under different HITs and AIMs. In terms of mixture formation, using compound AIM, more hydrogen accumulates near the ignition chamber compared to the peripheral and side AIMs. Also, when HITs are ?286°CA and ?190°CA, hydrogen concentrates near the ignition chamber, which will be conducive to the subsequent combustion process due to the RE's flame forward propagation characteristics. Comprehensively considering the airflow movement characteristics and fuel distribution rule, the peripheral AIM and the compound AIM, which their HITs are set at the compression stage (?190°CA), namely Case7 and Case9, are preferred schemes. This paper can provide some theoretical guidance for the intake structure design, injection strategy optimization and mixture rational organization of the HRE.     

Performance and combustion characteristic of CI engine fueled with hydrogen enriched diesel

The combustion of hydrogen–diesel blend fuel was investigated under simulated direct injection (DI) diesel engine conditions. The investigation presented in this paper concerns numerical analysis of neat diesel combustion mode and hydrogen enriched diesel combustion in a compression ignition (CI) engine. The parameters varied in this simulation included: H₂/diesel blend fuel ratio, engine speed, and air/fuel ratio. The study on the simultaneous combustion of hydrogen and diesel fuel was conducted with various hydrogen doses in the range from 0.05% to 50% (by volume) for different engine speed from 1000 – 4000 rpm and air/fuel ratios (A/F) varies from 10 – 80. The results show that, applying hydrogen as an extra fuel, which can be added to diesel fuel in the (CI) engine results in improved engine performance and reduce emissions compared to the case of neat diesel operation because this measure approaches the combustion process to constant volume. Moreover, small amounts of hydrogen when added to a diesel engine shorten the diesel ignition lag and, in this way, decrease the rate of pressure rise which provides better conditions for soft run of the engine. Comparative results are given for various hydrogen/diesel ratio, engine speeds and loads for conventional Diesel and dual fuel operation, revealing the effect of dual fuel combustion on engine performance and exhaust emissions.     

Enhancing the performance of a spark-ignition methanol engine with hydrogen addition

This paper investigated the effect of hydrogen addition on enhancing the performance of a methanol engine at part load and lean conditions. The experiment was conducted on a modified spark-ignited engine equipped with an adjustable dual-fuel injection system. The engine was run at an engine speed of 1400 rpm with two hydrogen volume fractions in the intake of 0% and 3%. The test results illustrated that the engine cyclic variation was eased and the brake thermal efficiency was enhanced after the hydrogen blending. Besides, the hydrogen enrichment was effective on reducing the flame development and propagation periods. HC and CO emissions were generally reduced after the hydrogen blending. NOx emissions from the hydrogen-blended methanol engine could be dropped to a low level when the engine was run under high excess air ratios.     

Investigation of the gas injection rate shape on combustion,knock and emissions behavior of a rotary engine with hydrogen direct-injection enrichment

The application of hydrogen direct-injection enrichment improves the performance of gasoline Wankel rotary engine, and the hydrogen injection strategy has a significant impact on combustion, knock, and emissions. The Z160F Wankel rotary engine was used as the investigated compact engine, and the simulation model was developed using CONVERGE software. The combustion, knock and emissions characteristics of the engine were studied with the different mass flow of hydrogen injection, i.e., the trapezoid, wedge, slope, triangle and rectangle type of gas injection rate shape. In the numerical simulations, the in-cylinder pressure oscillations were monitored using monitoring points, and the knock index (KI) was used as an evaluation indicator. The study revealed that the gas injection rate shape significantly affected the mixture of hydrogen and air, thus impacting combustion, knock and emissions. When the injection rate shape was rectangle, the flame speed was faster, the peak pressure in the cylinder was higher, and the corresponding crank angle was earlier, which led to higher pressure oscillations in the cylinder and larger KI. Based on the rectangle injection rate shape, the KI decreased by 75.81%, 33.47%, 26.46% and 76.58% for trapezoid, wedge, slope, and triangle, respectively, and the indicated mean effective pressure increased by 15.68%, 5.07%, 0.56% and 14.98%, respectively. Due to the small difference in maximum temperature, which resulted in very little variation in nitrogen oxides for each injection rate shape, the total hydrocarbon emissions of the trapezoid and triangle injection rate shape was high due to the delayed combustion phase. This paper provides a solution for direct hydrogen injection to improve the combustion, knock and emissions behavior of the rotary engine.     

Combustion and emissions performance of a hybrid hydrogen–gasoline engine at idle and lean conditions

Due to the narrow flammability of gasoline, pure gasoline-fueled spark-ignited (SI) engines always encounter partial burning or even misfire at lean conditions. Gasoline engines tend to suffer poor combustion and expel large emissions at idle conditions because of the high variation in the intake charge and low combustion temperature. Comparatively, hybrid hydrogen engines (HHE) fueled with the mixtures of hydrocarbon fuels and hydrogen seem to achieve lower emissions and gain higher thermal efficiencies than the original hydrocarbon-fueled engines due to the wide flammability and high flame speed of hydrogen. Since a HHE only requires a small amount of hydrogen, it also removes concerns about the high production and storage costs of hydrogen. This paper introduced an experiment conducted on a four-cylinder SI gasoline engine equipped with a hydrogen port-injection system to explore the performance of a hybrid hydrogen–gasoline engine (HHGE) at idle and lean conditions. The injection timings and durations of hydrogen and gasoline were governed by a hybrid electronic control unit (HECU) developed by the authors, which can be adjusted freely according to the commands from a calibration computer. During the test, hydrogen flow rate was varied to ensure that hydrogen volume fraction in the intake was constantly kept at 3%. For the specified hydrogen addition level, gasoline flow rate was reduced to make the engine operate at idle and lean conditions with various excess air ratios. The test results demonstrated that cyclic variations in engine idle speed and indicated mean effective pressure were eased with hydrogen enrichment. The indicated thermal efficiency was obviously higher for the HHGE than that for the original gasoline engine at idle and lean conditions. The indicated thermal efficiency at an excess air ratio of 1.37 was increased from 13.81% for the original gasoline engine to 20.20% for the HHGE with a 3% hydrogen blending level. Flame development and propagation periods were also evidently shortened after hydrogen blending. Moreover, HC, CO and NOx emissions were all improved after hydrogen enrichment at idle and lean conditions. Therefore, the HHE methodology is an effective and promising way for improving engine idle performance at lean conditions.     

Experimental study of the effects of excess air ratio on combustion and emission characteristics of the hydrogen-fueled rotary engine

To investigate the property of the promising and eco-friendly hydrogen-fueled rotary engine, the effect of excess air ratio on the combustion and emission characteristic of it was explored by experiment. The test was conducted under 1500 rpm and 5 CAD ADTC ignition timing. The test results demonstrated that with the decrease of excess air ratio from 2 to 0.85, the thermal efficiency of the hydrogen-fueled rotary engine increases first and then decreases. Besides, increasing MAP is beneficial to improve thermal efficiency. Among the tested condition, the highest brake thermal efficiency is realized when the rotary engine operates at 1.4 excess air ratio and 88 kPa MAP, about 18.34%. And the excellent HC and NO emissions can be obtained at the highest efficiency point. Besides, with the decrease of excess air ratio and the increase of load, the stability and flame development period gradually decrease. With a decreased excess air ratio, the flame propagation period decrease first and then increases, whereas work capacity and thermal efficiency increase first and then decrease. For NO emission, it will increase sharply near the equivalent ratio and gradually decrease after rich combustion. Also, according to the analytical model, it is found that the power performance of the rotary engine depends on the trade-off relationship of in-cylinder pressure and its angle of action.     

An experimental analysis of hydrogen enrichment on combustion characteristics of a gasoline Wankel engine at full load and lean burn regime

In this paper, a gasoline Wankel engine was modified and equipped with self-developed hybrid electronic control unit to experimentally investigate the effect of hydrogen-enrichment level on combustion characteristics of a gasoline Wankel engine at wild open throttle position and lean burn regime. Testing were carried out under constant engine speed of 3000 rpm and the lean operating limit of the original gasoline engine. The spark timing was set at 15 °BTDC. The hydrogen energy fraction in the intake was gradually increased from 0% to 10%. The results showed that hydrogen enrichment was effective on improving the combustion process through the shortened of the flame development and the flame propagation periods, advancing the central heat release, increasing the HRRmax and reducing the cyclic variation proportionally to the amount of hydrogen added to the air fuel mixture. Furthermore, increasing hydrogen fraction in the intake improves the engine economy by reducing the cooling loss.     

The effect of hydrogen on the performance and emissions of an SI engine having a high compression ratio fuelled by compressed natural gas

The aim of this paper is investigation of the effect of hydrogen on engine performance and emissions characteristics of an SI engine, having a high compression ratio, fuelled by HCNG (hydrogen enriched compressed natural gas) blend. The experiments were carried out at 1500, 2000 and 2500 rpm under full load conditions of a modified Isuzu 3.9 L engine, having a compression ratio of 12.5. The engine brake power, brake thermal efficiency, combustion analysis and emissions parameters were realized at 5, 10 15 and 20 deg. CA BTDC (crank angle before top dead center) ignition timings and in excess air ratios of 0.9–1.3 fuelled by hydrogen enriched compressed natural gas (100/0, 95/5, 90/10 and 80/20 of % natural gas/hydrogen).The experimental results showed that the maximum power values were generally obtained with HCNG5 (5% hydrogen in natural gas) fuel. The optimum ignition timing that was obtained according to the maximum brake torque was retarded by the addition of hydrogen to CNG (compressed natural gas), while it was advanced by increasing the engine speed. Furthermore, it was observed that the BTE (brake thermal efficiency) generally declined with the hydrogen addition to compressed natural gas and increasing the engine speed. Additionally, the curves of cylinder pressure and ROHR (rate of heat release values) generally closed to top dead center with the increasing of the hydrogen fraction in the blend and a decreasing engine speed. The hydrocarbon and carbon monoxide emissions generally obtained were lower than the Euro-5 and Euro-6 standards.     

Investigating the effects of injection and induction modes of hydrogen addition in a CRDI pilot diesel-fuel engine with exhaust gas recirculation

This work compares the outcomes of different flow rates of hydrogen added by induction and injection methods in three different flow rates (3, 9, and 15 LPM) through the intake manifold of a constant speed CRDI diesel engine operated at 1500 rpm. The premixed air and hydrogen mixture was ignited by injecting diesel fuel at 23? bTDC. Hydrogen addition reduced CO, HC, and smoke in both the techniques, but efficiency was decreased at a higher percentage of hydrogen induction, whereas it increased with the injection technique. The higher calorific value and flame velocity helped proper combustion and improved brake thermal efficiency by 7%, and the brake-specific energy consumption was reduced by 10.7%. In addition, CO, UHC, and Smoke were decreased by 15.8, 29.7, and 15% compared with neat diesel at full BMEP. Nitrogen oxides decreased by 5.6% for 15 LPM of hydrogen injection compared to the induction method with the same flow rate but higher than diesel fuel by 35.9%. Three different EGR percentages (5, 7.5, and 10%) were used to reduce the higher NOx emission. Though the injection process was complex compared to the induction method, the injection process can provide promising results even at higher hydrogen flow rates.     

Effect of hydrogen addition on combustion and emissions performance of a spark ignition gasoline engine at lean conditions

Hydrogen has many excellent combustion properties that can be used for improving combustion and emissions performance of gasoline-fueled spark ignition (SI) engines. In this paper, an experimental study was carried out on a four-cylinder 1.6 L engine to explore the effect of hydrogen addition on enhancing the engine lean operating performance. The engine was modified to realize hydrogen port injection by installing four hydrogen injectors in the intake manifolds. The injection timings and durations of hydrogen and gasoline were governed by a self-developed electronic control unit (DECU) according to the commands from a calibration computer. The engine was run at 1400 rpm, a manifold absolute pressure (MAP) of 61.5 kPa and various excess air ratios. Two hydrogen volume fractions in the total intake of 3% and 6% were applied to check the effect of hydrogen addition fraction on engine combustion. The test results showed that brake thermal efficiency was improved and kept roughly constant in a wide range of excess air ratio after hydrogen addition, the maximum brake thermal efficiency was increased from 26.37% of the original engine to 31.56% of the engine with a 6% hydrogen blending level. However, brake mean effective pressure (Bmep) was decreased by hydrogen addition at stoichiometric conditions, but when the engine was further leaned out Bmep increased with the increase of hydrogen addition fraction. The flame development and propagation durations, cyclic variation, HC and CO₂ emissions were reduced with hydrogen addition. When excess air ratio was approaching stoichiometric conditions, CO emission tended to increase with the addition of hydrogen. However, when the engine was gradually leaned out, CO emission from the hydrogen-enriched engine was lower than the original one. NO_x emissions increased with the increase of hydrogen addition due to the raised cylinder temperature.     

Combustion and emissions characteristics of a hybrid hydrogen–gasoline engine under various loads and lean conditions

The addition of hydrogen is an effective way for improving the gasoline engine performance at lean conditions. In this paper, an experiment aiming at studying the effect of hydrogen addition on combustion and emissions characteristics of a spark-ignited (SI) gasoline engine under various loads and lean conditions was carried out. An electronically controlled hydrogen port-injection system was added to the original engine while keeping the gasoline injection system unchanged. A hybrid electronic control unit was developed and applied to govern the spark timings, injection timings and durations of hydrogen and gasoline. The test was performed at a constant engine speed of 1400 rpm, which could represent the engine speed in the typical city-driving conditions with a heavy traffic. Two hydrogen volume fractions in the total intake of 0% and 3% were achieved through adjusting the hydrogen injection duration according to the air flow rate. At a specified hydrogen addition level, gasoline flow rate was decreased to ensure that the excess air ratios were kept at 1.2 and 1.4, respectively. For a given hydrogen blending fraction and excess air ratio, the engine load, which was represented by the intake manifolds absolute pressure (MAP), was increased by increasing the opening of the throttle valve. The spark timing for maximum brake torque (MBT) was adopted for all tests. The experimental results demonstrated that the engine brake mean effective pressure (Bmep) was increased after hydrogen addition only at low load conditions. However, at high engine loads, the hybrid hydrogen–gasoline engine (HHGE) produced smaller Bmep than the original engine. The engine brake thermal efficiency was distinctly raised with the increase of MAP for both the original engine and the HHGE. The coefficient of variation in indicated mean effective pressure (COVimep) for the HHGE was reduced with the increase of engine load. The addition of hydrogen was effective on improving gasoline engine operating instability at low load and lean conditions. HC and CO emissions were decreased and NOx emissions were increased with the increase of engine load. The influence of engine load on CO₂ emission was insignificant. All in all, the effect of hydrogen addition on improving engine combustion and emissions performance was more pronounced at low loads than at high loads.     

Performance,emission and combustion characteristics of CI engine fuelled with diesel and hydrogen

Hydrogen (H₂) is being considered as a primary automotive fuel and as a replacement for conventional fuels. Some of the desirable properties, like high flame velocity, high calorific value motivate us to use hydrogen fuel as a dual fuel mode in diesel engine. In this experiment, hydrogen was inducted in the inlet manifold with intake air. The experiments were conducted on a four stroke, single cylinder, water cooled, direct injection (DI), diesel engine at a speed of 1500 r/min. Hydrogen was stored in a high pressure cylinder and supplied to the inlet manifold through a water-and-air-based flame arrestor. A pressure regulator was used to reduce the cylinder pressure from 140 bar to 2 bar. The hydrogen was inducted with a volume flow rate of 4l pm, 6l pm and 8l pm, respectively by a digital volume flow meter. The engine performance, emission and combustion parameters were analyzed at various flow rates of hydrogen and compared with diesel fuel operation. The brake thermal efficiency (BTE) was increased and brake specific fuel consumption (BSFC) decreased for the hydrogen flow rate of 8l pm as compared to the diesel and lower volume flow rates of hydrogen. The hydrocarbon (HC) and carbon monoxide (CO) were decreased and the oxides of nitrogen (NO_x) increased for higher volume flow rates of hydrogen compared to diesel and lower volume flow rates of hydrogen. The heat release rate and cylinder pressure was increased for higher volume flow rates of hydrogen compared to diesel and lower volume flow rates of hydrogen.