Thermodynamic modeling of an integrated biomass gasification and solid oxide fuel cell system

An integrated process of biomass gasification and solid oxide fuel cells (SOFC) is investigated using energy and exergy analyses. The performance of the system is assessed by calculating several parameters such as electrical efficiency, combined heat and power efficiency, power to heat ratio, exergy destruction ratio, and exergy efficiency. A performance comparison of power systems for different gasification agents is given by thermodynamic analysis. Exergy analysis is applied to investigate exergy destruction in components in the power systems. When using oxygen-enriched air as gasification agent, the gasifier reactor causes the greatest exergy destruction. About 29% of the chemical energy of the biomass is converted into net electric power, while about 17% of it is used to for producing hot water for district heating purposes. The total exergy efficiency of combined heat and power is 29%. For the case in which steam as the gasification agent, the highest exergy destruction lies in the air preheater due to the great temperature difference between the hot and cold side. The net electrical efficiency is about 40%. The exergy combined heat and power efficiency is above 36%, which is higher than that when air or oxygen-enriched air as gasification agent.     

A new solar based multigeneration system with hot and cold thermal storages and hydrogen production

A multigeneration system based on solar thermal energy associated with hot and cold thermal storage is designed and analyzed energetically and exergetically. The system produces electricity, a heating effect, a cooling effect, hydrogen, and dry sawdust biomass as outputs by means of organic Rankine cycles, a heat pump, two absorption chillers, an electrolyser, and a belt dryer. The intermittent behavior of the renewable energy source is addressed through the incorporation of hot and cold thermal storage systems to operate an organic Rankine cycle and provide cooling at night. The performance assessment indicates that the overall (day and night) energy and exergy efficiencies are 20.7% and 13.7%, respectively. The majority of the total exergy destruction is attributable to the sawdust belt dryer, at about 64.0%.     

Energetic and exergetic assessments of a novel solar power tower based multigeneration system with hydrogen production and liquefaction

In this article, a thermodynamic investigation of solar power tower assisted multigeneration system with hydrogen production and liquefaction is presented for more environmentally-benign multigenerational outputs. The proposed multigeneration system is consisted of mainly eight sub-systems, such as a solar power tower, a high temperature solid oxide steam electrolyzer, a steam Rankine cycle with two turbines, a hydrogen generation and liquefaction cycle, a quadruple effect absorption cooling process, a drying process, a membrane distillation unit and a domestic hot water tank to supply hydrogen, electrical power, heating, cooling, dry products, fresh and hot water generation for a community. The energetic and exergetic efficiencies for the performance of the present multigeneration system are found as 65.17% and 62.35%, respectively. Also, numerous operating conditions and parameters of the systems and their effects on the respective energy and exergy efficiencies are investigated, evaluated and discussed in this study. A parametric study is carried out to analyze the impact of various system design indicators on the sub-systems, exergy destruction rates and exergetic efficiencies and COPs. In addition, the impacts of varying the ambient temperature and solar radiation intensity on the irreversibility and exergetic performance for the present multigeneration system and its components are investigated and evaluated comparatively. According to the modeling results, the solar irradiation intensity is found to be the most influential parameter among other conditions and factors on system performance.     

A new solar and geothermal based integrated ammonia fuel cell system for multigeneration

In this study, a new solar and geothermal based integrated system is developed for multigeneration of electricity, fresh water, hydrogen and cooling. The system also entails a solar integrated ammonia fuel cell subsystem. Furthermore, a reverse osmosis desalination system is used for fresh water production and a proton exchange membrane based hydrogen production system is employed. Moreover, an absorption cooling system is utilized for district cooling via available system waste heat. The system designed is assessed thermodynamically through approaches of energy and exergy analyses. The overall energy efficiency is determined to be 42.3%. Also, the overall exergy efficiency is assessed, and it is found to be 21.3%. The exergy destruction rates in system components are also analysed and the absorption cooling system generator as well as geothermal flash chamber are found to have comparatively higher exergy destruction rates of 2370.2 kW and 643.3 kW, respectively. In addition, the effects of varying system parameters on the system performance are studied through a parametric analyses of the overall system and associated subsystems.     

Development and performance analysis of a new solar tower and high temperature steam electrolyzer hybrid integrated plant

In this article, an extensive thermodynamic performance assessment for the useful products from the solar tower and high-temperature steam electrolyzer assisted multigeneration system is performed, and also its sustainability index is also investigated. The system under study is considered for multi-purposes such as power, heating, cooling, drying productions, and also hydrogen generation and liquefaction. In this combined plant occurs of seven sub-systems; the solar tower, gas turbine cycle, high temperature steam electrolyzer, dryer process, heat pump, and absorption cooling system with single effect. In addition, the energy and exergy performance, irreversibility and sustainability index of multigeneration system are examined according to several factors, such as environment temperature, gas turbine input pressure, solar radiation and pinch point temperature of HRSG. Results of thermodynamic and sustainability assessments show that the total energetic and exergetic efficiency of suggested paper are calculated as 60.14%, 58.37%, respectively. The solar tower sub-system has the highest irreversibility with 18775 kW among the multigeneration system constituents. Solar radiation and pinch point temperature of HRSG are the most critical determinants affecting the system energetic and exergetic performances, and also hydrogen production rate. In addition, it has been concluded that, the sustainability index of multigeneration suggested study has changed between 2.2 and 3.05.     

10 MW生物质气化耦合超临界燃煤锅炉系统火用平衡分析

为有效评价生物质气化耦合燃煤锅炉系统能量转换过程,分析该系统的节能潜力,以某10 MW循环流化床生物质气化炉耦合大型超临界燃煤机组为例,建立了该耦合系统的火用分析控制体模型,利用Aspen plus平台对该系统实际运行过程进行火用平衡分析。结果表明：当前运行工况下,生物质气化过程火用损失是耦合系统最大的火用损失,达到42.28%,其次是可燃气体在燃煤锅炉内的燃烧及传热过程,为25.32%。因此系统运行过程中应采取优化运行措施,减小气化过程火用损失,同时气化炉应尽量与高参数的大型机组耦合运行,可燃气体选取在燃煤锅炉合适位置输入,以保证充分燃烧。     

An innovative approach for geothermal-wind hybrid comprehensive energy system and hydrogen production modeling/process analysis

In this paper, the energy, exergy, economic, environmental, steady-state, and process performance modeling/analysis of hybrid renewable energy (RE) based multigeneration system is presented. Beyond the design/performance analysis of an innovative hybrid RE system, this study is novel as it proposes a new methodology for determining the overall process energy and exergy efficiency of multigeneration systems. This novel method integrates EnergPLAN simulation program with EES and Matlab. It considers both the steady-state and the process performance of the modeled system on hourly timesteps in order to determine the overall efficiencies. Based on the proposed new method, it is observed that the overall process thermodynamic efficiencies of a hybrid renewable energy-based multigeneration system are different from its steady-state efficiencies. The overall energy and exergy efficiencies reduce from 81.01% and 52.52% (in steady-state condition) to 58.6% and 39.33% (when considering a one-year process performance). The integration of the hot water production with the multigeneration system enhanced the overall thermodynamic efficiencies in steady-state conditions. The Kalina system produces a total work output of 1171 kW with a thermal and exergy efficiency of 12.23% and 52% respectively while the wind turbine system produces 1297 kW of electricity in steady-state condition and it has the same thermal/exergy efficiency (72%). The economic analysis showed that the Levelized cost of electricity (LCOE) of the geothermal energy-based Kalina system is 0.0103 $/kWh. The greenhouse gas emission reduction analysis showed that the proposed system will save between 1,411,480 kg/yr and 3,518,760 kg/yr of greenhouse gases from being emitted into the atmosphere yearly. The multigeneration system designed in this study will produce electricity, hydrogen, hot water, cooling effect, and freshwater. Also, battery electric vehicle charging is integrated with process performance analysis of the multigeneration system.     

Development and thermodynamic assessment of a novel solar and biomass energy based integrated plant for liquid hydrogen production

In this paper, a combined power plant based on the dish collector and biomass gasifier has been designed to produce liquefied hydrogen and beneficial outputs. The proposed solar and biomass energy based combined power system consists of seven different subplants, such as solar power process, biomass gasification plant, gas turbine cycle, hydrogen generation and liquefaction system, Kalina cycle, organic Rankine cycle, and single-effect absorption plant with ejector. The main useful outputs from the combined plant include power, liquid hydrogen, heating-cooling, and hot water. To evaluate the efficiency of integrated solar energy plant, energetic and exergetic effectiveness of both the whole plant and the sub-plants are performed. For this solar and biomass gasification based combined plant, the generation rates for useful outputs covering the total electricity, cooling, heating and hydrogen, and hot water are obtained as nearly 3.9 MW, 6584 kW, 4206 kW, and 0.087 kg/s in the base design situations. The energy and exergy performances of the whole system are calculated as 51.93% and 47.14%. Also, the functional exergy of the whole system is calculated as 9.18% for the base working parameters. In addition to calculating thermodynamic efficiencies, a parametric plant is conducted to examine the impacts of reference temperature, solar radiation intensity, gasifier temperature, combustion temperature, compression ratio of Brayton cycle, inlet temperature of separator 2, organic Rankine cycle turbine and pump input temperature, and gas turbine input temperature on the combined plant performance.     

Thermodynamic performance analysis of a copper–chlorine thermochemical cycle and biomass based combined plant for multigeneration

The primary objective of this work is to investigate a comprehensive thermodynamic assessment of the biomass-assisted multigeneration plant for electrical energy, hydrogen, heating-cooling, drying, and hot water production. The suggested multigeneration plant includes the biomass gasification process, Brayton cycle, Kalina cycle, organic Rankine cycle, and cascade refrigeration plant, which is to produce heating and cooling loads, drying system, hydrogen generation with copper–chlorine thermochemical process, and hydrogen liquefaction process. Based on the thermodynamic laws, the total irreversibility rate and performance assessment of the examined study is conducted. Moreover, the impact of various factors such as reference temperature, biomass gasifier temperature, and mass flow rate of biofuel, on the effectiveness and useful outputs of planned plant are examined. The outcomes of the proposed study show that 18 626, 3948 and 1037 kW electrical energy are generated by using the Brayton, Kalina, and organic Rankine cycle. Furthermore, the total cooling and heating capacities and hydrogen generation rates are 2392, 2864 kW and 0.068 kg s⁻¹. Finally, energetic and exergetic effectiveness of the examined model are calculated as 56.71% and 53.59%.     

Exergy analysis of biomass-to-synthetic natural gas (SNG) process via indirect gasification of various biomass feedstock

This paper presents an exergy analysis of SNG production via indirect gasification of various biomass feedstock, including virgin (woody) biomass as well as waste biomass (municipal solid waste and sludge). In indirect gasification heat needed for endothermic gasification reactions is produced by burning char in a separate combustion section of the gasifier and subsequently the heat is transferred to the gasification section. The advantages of indirect gasification are no syngas dilution with nitrogen and no external heat source required. The production process involves several process units, including biomass gasification, syngas cooler, cleaning and compression, methanation reactors and SNG conditioning. The process is simulated with a computer model using the flow-sheeting program Aspen Plus. The exergy analysis is performed for various operating conditions such as gasifier pressure, methanation pressure and temperature. The largest internal exergy losses occur in the gasifier followed by methanation and SNG conditioning. It is shown that exergetic efficiency of biomass-to-SNG process for woody biomass is higher than that for waste biomass. The exergetic efficiency for all biomass feedstock increases with gasification pressure, whereas the effects of methanation pressure and temperature are opposite for treated wood and waste biomass.     

Exergy analysis of hydrogen production plants based on biomass gasification

Biomass gasification is a promising option for the sustainable production of hydrogen rich gas. Five different commercial or pilot scale gasification systems are considered for the design of a hydrogen production plant that generates almost pure hydrogen. For each of the gasification technique models of two different hydrogen production plants are developed in Cycle-Tempo: one plant with low temperature gas cleaning (LTGC) and the other with high temperature gas cleaning (HTGC). The thermal input of all plants is 10 MW of biomass with the same dry composition. An exergy analysis of all processes has been made. The processes are compared on their thermodynamic performance (hydrogen yield and exergy efficiency). Since the heat recovery is not incorporated in the models, two efficiencies are calculated. The first one is calculated for the case that all residual heat can be applied, the case with ideal heat recovery, and the other is calculated for the case without heat recovery. It is expected that in real systems only a part of the residual heat can be used. Therefore, the actual value will be in between these calculated values. It was found that three processes have almost the same performance: The Battelle gasification process with LTGC, the FICFB gasification process with LTGC, and the Blaue Turm gasification process with HTGC. All systems include further processing of the cleaned gas from biomass gasification into almost pure hydrogen. The calculated exergy efficiencies are, respectively, 50.69%, 45.95%, and 50.52% for the systems without heat recovery. The exergy efficiencies of the systems with heat recovery are, respectively, 62.79%, 64.41%, and 66.31%. The calculated hydrogen yields of the three processes do not differ very much. The hydrogen yield of the Battelle LTGC process appeared to be 0.097 kg (kg_{(dry biomass)})⁻¹, for the FICFB LTGC process a yield of 0.096 kg (kg_{(dry biomass)})⁻¹ was found, and for the Blaue Turm HTGC 0.106 kg (kg_{(dry biomass)})⁻¹.     

Exergy analysis of renewable light olefin production system via biomass gasification and methanol synthesis

The conceptual light olefin production system from biomass via gasification and methanol synthesis was simulated and its thermodynamic performance was evaluated through exergy analysis. The system was made up of gasification, gas composition adjustment, methanol synthesis, light olefin synthesis, steam & power generation and cooling water treatment. The in-depth exergy analysis was performed at the levels of system, subsystem and operation component respectively. The gasifier and the tail gas combustor were the main sources of irreversibility with exergy destruction ratios of 17.0% and 16.8% of the input exergy of biomass. The steam & power generation subsystem accounted for 43.4% of the overall exergy destruction, followed by 41.0% and 5.69% in the subsystems of gasification and gas composition adjustment respectively. The sensitivity evaluation of the operation parameters of gasifier indicates that the system efficiency could be improved by enhancing syngas yield and subsequent yield of light olefins. The overall exergetic efficiency of 30.5% is obtained at the mass ratios of steam to biomass and O₂-rich gas (95 vol%) to biomass (S/B and O/B) of 0.26 and 0.14 and gasification temperature at 725 °C.     

A review on biomass‐based hydrogen production and potential applications

In this paper, a detailed review is presented to discuss biomass‐based hydrogen production systems and their applications. Some optimum hydrogen production and operating conditions are studied through a comprehensive sensitivity analysis on the hydrogen yield from steam biomass gasification. In addition, a hybrid system, which combines a biomass‐based hydrogen production system and a solid oxide fuel cell unit is considered for performance assessment. A comparative thermodynamic study also is undertaken to investigate various operational aspects through energy and exergy efficiencies. The results of this study show that there are various key parameters affecting the hydrogen production process and system performance. They also indicate that it is possible to increase the hydrogen yield from 70 to 107 g H₂ per kg of sawdust wood. By studying the energy and exergy efficiencies, the performance assessment shows the potential to produce hydrogen from steam biomass gasification. The study further reveals a strong potential of this system as it utilizes steam biomass gasification for hydrogen production. To evaluate the system performance, the efficiencies are calculated at particular pressures, temperatures, current densities, and fuel utilization factors. It is found that there is a strong potential in the gasification temperature range 1023–1423 K to increase energy efficiency with a hydrogen yield from 45 to 55% and the exergy efficiency with hydrogen yield from 22 to 32%, respectively, whereas the exergy efficiency of electricity production decreases from 56 to 49.4%. Hydrogen production by steam sawdust gasification appears to be an ultimate option for hydrogen production based on the parametric studies and performance assessments that were carried out through energy and exergy efficiencies. Finally, the system integration is an attractive option for better performance. Copyright © 2012 John Wiley & Sons, Ltd.     

Thermodynamic analysis of hydrogen production from biomass gasification

An investigation is reported of the thermodynamic performance of the gasification process followed by the steam-methane reforming (SMR) and shift reactions for producing hydrogen from oil palm shell, one of the most common biomass resources. Energy and exergy efficiencies are determined for each component in this system. A process simulation tool is used for assessing the indirectly heated Battelle Columbus Laboratory (BCL) gasifier, which is included with the decomposition reactor to produce syngas for producing hydrogen. A simplified model is presented here for biomass gasification based on chemical equilibrium considerations, with the Gibbs free energy minimization approach. The gasifier with the decomposition reactor is observed to be one of the most critical components of a biomass gasification system, and is modeled to control the produced syngas yield. Also various thermodynamic efficiencies, namely energy, exergy and cold gas efficiencies are evaluated which may be useful for the design, optimization and modification of hydrogen production and other related processes.     

Steam and air fed biomass gasification: Comparisons based on energy and exergy

Results are reported of thermodynamic analyses of a biomass gasification unit in which sawdust is the biomass feed and the gasifying medium is either air or steam. Energy and exergy analyses are performed for the system and each of its components. A parametric study reveals the effect of design and operating parameters on the system's performance and energy and exergy efficiencies. The results show that the adiabatic temperature of biomass gasification significantly changes with the type of the gasifying medium. In addition, the exergy and energy efficiencies are observed to be higher when air is the gasifying medium rather than steam, while the system performance and exergy efficiencies are dependent on the moisture content of the feed biomass. The results are significant because they quantify the strong dependence of biomass gasification, which can be used for syngas or hydrogen production, on moisture content, and gasifying medium.     

Thermo-environ study of a concentrated photovoltaic thermal system integrated with Kalina cycle for multigeneration and hydrogen production

Unlike steam and gas cycles, the Kalina cycle system can utilize low-grade heat to produce electricity with water-ammonia solution and other mixed working fluids with similar thermal properties. Concentrated photovoltaic thermal systems have proven to be a technology that can be used to maximize solar energy conversion and utilization. In this study, the integration of Kalina cycle with a concentrated photovoltaic thermal system for multigeneration and hydrogen production is investigated. The purpose of this research is to develop a system that can generate more electricity from a solar photovoltaic thermal/Kalina system hybridization while multigeneration and producing hydrogen. With this aim, two different system configurations are modeled and presented in this study to compare the performance of a concentrated photovoltaic thermal integrated multigeneration system with and without a Kalina system. The modeled systems will generate hot water, hydrogen, hot air, electricity, and cooling effect with photovoltaic cells, a Kalina cycle, a hot water tank, a proton exchange membrane electrolyzer, a single effect absorption system, and a hot air tank. The environmental benefit of two multigeneration systems modeled in terms of carbon emission reduction and fossil fuel savings is also studied. The energy and exergy efficiencies of the heliostat used in concentrating solar radiation onto the photovoltaic thermal system are 90% and 89.5% respectively, while the hydrogen production from the two multigeneration system configurations is 10.6 L/s. The concentrated photovoltaic thermal system has a 74% energy efficiency and 45.75% exergy efficiency, while the hot air production chamber has an 85% and 62.3% energy and exergy efficiencies, respectively. Results from this study showed that the overall energy efficiency of the multigeneration system increases from 68.73% to 70.08% with the integration of the Kalina system. Also, an additional 417 kW of electricity is produced with the integration of the Kalina system and this justifies the importance of the configuration. The production of hot air at the condensing stage of the photovoltaic thermal/Kalina hybrid system is integral to the overall performance of the system.     

Preliminary investigation of a transcritical CO2 heat pump driven by a solar‐powered CO2 Rankine cycle

In this paper, a transcritical carbon dioxide heat pump system driven by solar‐owered CO₂ Rankine cycle is proposed for simultaneous heating and cooling applications. Based on the first and second laws of thermodynamics, a theoretical analysis on the performance characteristic is carried out for this solar‐powered heat pump cycle using CO₂ as working fluid. Further, the effects of the governing parameters on the performance such as coefficient of performance (COP) and the system exergy destruction rate are investigated numerically. With the simulation results, it is found that, the cooling COP for the transcritical CO₂ heat pump syatem is somewhat above 0.3 and the heating COP is above 0.9. It is also concluded that, the performance of the combined transcritical CO₂ heat pump system can be significantly improved based on the optimized governing parameters, such as solar radiation, solar collector efficient area, the heat transfer area and the inlet water temperature of heat exchange components, and the CO₂ flow rate of two sub‐cycles. Where, the cooling capacity, heating capacity, and exergy destruction rate are found to increase with solar radiation, but the COPs of combined system are decreased with it. Furthermore, in terms of improvement in COPs and reduction in system exergy destruction at the same time, it is more effective to employ a large heat transfer area of heat exchange components in the combined heat pump system. Copyright © 2012 John Wiley & Sons, Ltd.     

Exergy evaluation of biomass steam gasification via interconnected fluidized beds

This paper presents the thermodynamic assessment of biomass steam gasification via interconnected fluidized beds (IFB) system. The performance examined included the composition, yield and higher heating value (HHV) of dry syngas, and exergy efficiencies of the process. Two exergy efficiencies were calculated for the cases with and without heat recovery, respectively. The effects of steam‐to‐biomass ratio (S/B), gasification temperature, and pressure on the thermodynamic performances were investigated based on a modified modeling of the IFB system. The results showed that at given gasification temperature and pressure, the exergy efficiencies and dry syngas yield reached the maximums when S/B was at the corresponding carbon boundary point (S/B_CBP). The HHV of the dry syngas continuously decreased with the increase of S/B. Moreover, the exergy efficiency with heat recovery was averagely a dozen percentage points higher than that without heat recovery. Under atmospheric conditions, lower gasification temperature favored the yield and HHV of dry syngas at various S/B. In addition, it also favored the exergy efficiencies of the process when S/B is approximately larger than 0.75. Under pressurized conditions, higher gasification pressure favored both the yield and HHV of dry syngas, as well as the exergy efficiencies at different S/B. Copyright © 2013 John Wiley & Sons, Ltd.     

Sustainability improvement in combined electricity and freshwater generation systems via biomass: A comparative emergy analysis and multi-objective optimization

For energy systems, sustainability is a major concern that must be carefully considered when designed and established. Emergy analysis is an effective technique to scrutinize the sustainability of these systems. On the other hand, water shortage is seen to become a big problem in the close future; however, this problem can be effectively alleviated by combined electricity/water production plants, where waste heat is recovered to generate freshwater. This study applies emergy analysis to evaluate and improve the sustainability, renewability, environmental impacts, and economic aspect of such a plant, in which a multi-stage desalination (MSF) system is employed to recover the waste heat from a gas turbine (GT). The plant is fueled by biomass/natural gas (system I), natural gas (system II), and biomass (system III), and the above-mentioned features are compared for the different fuel types. To estimate chemical equilibrium state inside the gasifier, Lagrange's method of undetermined multipliers is applied. Also, considering exergy efficiency and emergy sustainability index as objective functions, biomass/natural gas-fueled system is optimized by adopting a multi-objective optimization approach based on the non-dominated sorting genetic algorithm II (NSGA II). To predict the optimized points' behavior, the Pareto optimal frontier of the system is utilized. The results reveal that using biomass as inlet fuel remarkably improves the sustainability index and reduces environmental impacts. The optimization results show that as sustainability index increases, exergy efficiency decreases. Also, the two optimized points of the system are found to have exergy efficiencies of 20.14% and 25.09% and sustainability indices of 24.67% and 13.60%.     

A new synthetic metamodel methodology for liquid‐propellant engine's cooling system optimization

The present paper strives for optimization of the cooling system of a liquid‐propellant engine (LPE). To this end, the new synthetic metamodel methodology utilizing the design of experiment method and the response surface method was developed and implemented as two effective means of designing, analyzing, and optimizing. The input variables, constraints, objective functions, and their surfaces were identified. Hence, the design and development strategy of combustion chamber and nozzle was clarified, and 64 different experiments were carried out on the RD‐161 propulsion system, of which 47 experiments were approved and compatible with the problem constraints. This engine used all three modes of cooling: the radiation cooling, the regenerative cooling, and the film cooling. The response surface curves were drawn and the related objective function equations were obtained. The analysis of variance results indicate that the developed synthetic model is capable to predict the responses adequately within the limits of input parameters. The three‐dimensional response surface curves and contour plots have been developed to find out the combined effects of input parameters on responses. In addition, the precision of the models was assessed and the output was interpreted and analyzed, which showed high accuracy. Therefore, the desirability function analysis has been applied to LPE's cooling system for multiobjective optimization to maximize the total heat transfer and minimize the cooling system pressure loss simultaneously. Finally, confirmatory tests have been conducted with the optimum parametric conditions to validate the optimization techniques. In conclusion, this methodology optimizes the LPE's cooling system, a 2% increase in the total heat transfer, and a 38% decrease in the pressure loss of the cooling system. These values are considerably large for the LPE design.