High‐Stacking‐Density,Superior‐Roughness LDH Bridged with Vertically Aligned Graphene for High‐Performance Asymmetric Supercapacitors

The high‐performance electrode materials with tuned surface and interface structure and functionalities are highly demanded for advanced supercapacitors. A novel strategy is presented to conFigure high‐stacking‐density, superior‐roughness nickel manganese layered double hydroxide (LDH) bridged by vertically aligned graphene (VG) with nickel foam (NF) as the conductive collector, yielding the LDH‐NF@VG hybrids for asymmetric supercapacitors. The VG nanosheets provide numerous electron transfer channels for quick redox reactions, and well‐developed open structure for fast mass transport. Moreover, the high‐stacking‐density LDH grown and assembled on VG nanosheets result in a superior hydrophilicity derived from the tuned nano/microstructures, especially microroughness. Such a high stacking density with abundant active sites and superior wettability can be easily accessed by aqueous electrolytes. Benefitting from the above features, the LDH‐NF@VG can deliver a high capacitance of 2920 F g^?1 at a current density of 2 A g^?1, and the asymmetric supercapacitor with the LDH‐NF@VG as positive electrode and activated carbon as negative electrode can deliver a high energy density of 56.8 Wh kg^?1 at a power density of 260 W kg^?1, with a high specific capacitance retention rate of 87% even after 10 000 cycles.     

ZIF-67/rGO/NiPc composite electrode material for high-performance asymmetric supercapacitors

In this reported study, novel multiple dimensional ZIF-67/rGO/NiPc composite materials were prepared for supercapacitors. The electrochemical test showed that the ZIF-67/rGO/NiPc electrode achieved a remarkable specific capacitance of 860 F g^?1 at a current density of 1 A g^?1, which was superior to that of the rGO/NiPc and ZIF-67/rGO electrodes. An asymmetric supercapacitor based on ZIF-67/rGO/NiPc//activated carbon exhibited a high specific capacitance of 200.67 F g^?1 and an extraordinary energy density of 62.7 Wh kg^?1 at a corresponding power density of 750 W kg^?1. In addition, the device demonstrated 94.6% capacitance retention after 5000 cycles. The assembled asymmetric supercapacitors could easily powered a green light-emitting diode. This work revealed a promising research route for the rational construction of multiple dimensioned high-performance electrodes materials for use in new energy storage devices.

     

Ultrathin Hierarchical Porous Carbon Nanosheets for High‐Performance Supercapacitors and Redox Electrolyte Energy Storage

The design of advanced high‐energy‐density supercapacitors requires the design of unique materials that combine hierarchical nanoporous structures with high surface area to facilitate ion transport and excellent electrolyte permeability. Here, shape‐controlled 2D nanoporous carbon sheets (NPSs) with graphitic wall structure through the pyrolysis of metal–organic frameworks (MOFs) are developed. As a proof‐of‐concept application, the obtained NPSs are used as the electrode material for a supercapacitor. The carbon‐sheet‐based symmetric cell shows an ultrahigh Brunauer–Emmett–Teller (BET)‐area‐normalized capacitance of 21.4 µF cm^?2 (233 F g^?1), exceeding other carbon‐based supercapacitors. The addition of potassium iodide as redox‐active species in a sulfuric acid (supporting electrolyte) leads to the ground‐breaking enhancement in the energy density up to 90 Wh kg^?1, which is higher than commercial aqueous rechargeable batteries, maintaining its superior power density. Thus, the new material provides a double profits strategy such as battery‐level energy and capacitor‐level power density.     

Nitrogen-doped hierarchical porous carbon materials derived from diethylenetriaminepentaacetic acid (DTPA) for supercapacitors

Nitrogen-doped porous carbon materials (NPCs) have been successfully fabricated by a simple one-step pyrolysis of diethylenetriaminepentaacetic acid (DTPA) in the presence of KOH. The as-synthesized NPCs displayed a high specific surface area (3214?m²?g^?1) and a well-defined porous structure when the annealing temperature reached 800?°C, which showed superior electrochemical performance as supercapacitor electrode materials. Electrochemical tests showed that the NPCs achieved an impressive specific capacitance of 323?F?g^?1 at a current density of 0.5?A?g^?1 in 6?M KOH aqueous solution and an outstanding cycle stability, negligible specific capacitance decay after 5000 cycles at 10?A?g^?1. This strategy offered a new insight into the preparation of novel carbon materials for the advanced energy storage devices, such as supercapacitors, fuel cells and lithium ion batteries.     

Hierarchical 3D All‐Carbon Composite Structure Modified with N‐Doped Graphene Quantum Dots for High‐Performance Flexible Supercapacitors

Flexible supercapacitors have shown enormous potential for portable electronic devices. Herein, hierarchical 3D all‐carbon electrode materials are prepared by assembling N‐doped graphene quantum dots (N‐GQDs) on carbonized MOF materials (cZIF‐8) interweaved with carbon nanotubes (CNTs) for flexible all‐solid‐state supercapacitors. In this ternary electrode, cZIF‐8 provides a large accessible surface area, CNTs act as the electrical conductive network, and N‐GQDs serve as highly pseudocapactive materials. Due to the synergistic effect and hierarchical assembly of these components, N‐GQD@cZIF‐8/CNT electrodes exhibit a high specific capacitance of 540 F g^?1 at 0.5 A g^?1 in a 1 m H₂SO₄ electrolyte and excellent cycle stability with 90.9% capacity retention over 8000 cycles. The assembled supercapacitor possesses an energy density of 18.75 Wh kg^?1 with a power density of 108.7 W kg^?1. Meanwhile, three supercapacitors connected in series can power light‐emitting diodes for 20 min. All‐solid‐state N‐GQD@cZIF‐8/CNT flexible supercapacitor exhibits an energy density of 14 Wh kg^?1 with a power density of 89.3 W kg^?1, while the capacitance retention after 5000 cycles reaches 82%. This work provides an effective way to construct novel electrode materials with high energy storage density as well as good cycling performance and power density for high‐performance energy storage devices via the rational design.     

Biomass‐Derived Nitrogen‐Doped Carbon Nanofiber Network: A Facile Template for Decoration of Ultrathin Nickel‐Cobalt Layered Double Hydroxide Nanosheets as High‐Performance Asymmetric Supercapacitor Electrode

The development of biomass‐based energy storage devices is an emerging trend to reduce the ever‐increasing consumption of non‐renewable resources. Here, nitrogen‐doped carbonized bacterial cellulose (CBC‐N) nanofibers are obtained by one‐step carbonization of polyaniline coated bacterial cellulose (BC) nanofibers, which not only display excellent capacitive performance as the supercapacitor electrode, but also act as 3D bio‐template for further deposition of ultrathin nickel‐cobalt layered double hydroxide (Ni‐Co LDH) nanosheets. The as‐obtained CBC‐N@LDH composite electrodes exhibit significantly enhanced specific capacitance (1949.5 F g^?1 at a discharge current density of 1 A g^?1, based on active materials), high capacitance retention of 54.7% even at a high discharge current density of 10 A g^?1 and excellent cycling stability of 74.4% retention after 5000 cycles. Furthermore, asymmetric supercapacitors (ASCs) are constructed using CBC‐N@LDH composites as positive electrode materials and CBC‐N nanofibers as negative electrode materials. By virtue of the intrinsic pseudocapacitive characteristics of CBC‐N@LDH composites and 3D nitrogen‐doped carbon nanofiber networks, the developed ASC exhibits high energy density of 36.3 Wh kg^?1 at the power density of 800.2 W kg^?1. Therefore, this work presents a novel protocol for the large‐scale production of biomass‐derived high‐performance electrode materials in practical supercapacitor applications.     

Vertically Aligned Graphene–Carbon Fiber Hybrid Electrodes with Superlong Cycling Stability for Flexible Supercapacitors

Graphene electrode–based supercapacitors are in high demand due to their superior electrochemical characteristics. A major bottleneck of using the supercapacitors for commercial applications lies in their inferior electrode cycle life. Herein, a simple and facile method to fabricate highly efficient supercapacitor electrodes using pristine graphene sheets vertically stacked and electrically connected to the carbon fibers which can result in vertically aligned graphene–carbon fiber nanostructure is developed. The vertically aligned graphene–carbon fiber electrode prepared by electrophoretic deposition possesses a mesoporous 3D architecture which enabled faster and efficient electrolyte‐ion diffusion with a gravimetric capacitance of 333.3 F g^?1 and an areal capacitance of 166 mF cm^?2. The electrodes displayed superlong electrochemical cycling stability of more than 100 000 cycles with 100% capacitance retention hence promising for long‐lasting supercapacitors. Apart from the electrochemical double layer charge storage, the oxygen‐containing surface moieties and α‐Ni(OH)₂ present on the graphene sheets enhance the charge storage by faradaic reactions. This enables the assembled device to provide an excellent gravimetric energy density of 76 W h kg^?1 with a 100% capacitance retention even after 1000 bending cycles. This study opens the door for developing high‐performing flexible graphene electrodes for wearable energy storage applications.     

Efficient Supercapacitor Energy Storage Using Conjugated Microporous Polymer Networks Synthesized from Buchwald–Hartwig Coupling

Supercapacitors have received increasing interest as energy storage devices due to their rapid charge–discharge rates, high power densities, and high durability. In this work, novel conjugated microporous polymer (CMP) networks are presented for supercapacitor energy storage, namely 3D polyaminoanthraquinone (PAQ) networks synthesized via Buchwald–Hartwig coupling between 2,6‐diaminoanthraquinone and aryl bromides. PAQs exhibit surface areas up to 600 m² g^?1, good dispersibility in polar solvents, and can be processed to flexible electrodes. The PAQs exhibit a three‐electrode specific capacitance of 576 F g^?1 in 0.5 m H₂SO₄ at a current of 1 A g^?1 retaining 80–85% capacitances and nearly 100% Coulombic efficiencies (95–98%) upon 6000 cycles at a current density of 2 A g^?1. Asymmetric two‐electrode supercapacitors assembled by PAQs show a capacitance of 168 F g^?1 of total electrode materials, an energy density of 60 Wh kg^?1 at a power density of 1300 W kg^?1, and a wide working potential window (0–1.6 V). The asymmetric supercapacitors show Coulombic efficiencies up to 97% and can retain 95.5% of initial capacitance undergo 2000 cycles. This work thus presents novel promising CMP networks for charge energy storage.     

MoS2/NiS Yolk–Shell Microsphere‐Based Electrodes for Overall Water Splitting and Asymmetric Supercapacitor

Rational designing of the composition and structure of electrode material is of great significance for achieving highly efficient energy storage and conversion in electrochemical energy devices. Herein, MoS₂/NiS yolk–shell microspheres are successfully synthesized via a facile ionic liquid‐assisted one‐step hydrothermal method. With the favorable interface effect and hollow structure, the electrodes assembled with MoS₂/NiS hybrid microspheres present remarkably enhanced electrochemical performance for both overall water splitting and asymmetric supercapacitors. In particular, to deliver a current density of 10 mA cm^?2, the MoS₂/NiS‐based electrolysis cell for overall water splitting only needs an output voltage of 1.64 V in the alkaline medium, lower than that of Pt/C–IrO₂‐based electrolysis cells (1.70 V). As an electrode for supercapacitors, the MoS₂/NiS hybrid microspheres exhibit a specific capacitance of 1493 F g^?1 at current density of 0.2 A g^?1, and remain 1165 F g^?1 even at a large current density of 2 A g^?1, implying outstanding charge storage capacity and excellent rate performance. The MoS₂/NiS‐ and active carbon‐based asymmetric supercapacitor manifests a maximum energy density of 31 Wh kg^?1 at a power density of 155.7 W kg^?1, and remarkable cycling stability with a capacitance retention of approximately 100% after 10 000 cycles.     

Hierarchical porous carbon obtained from directly carbonizing carex meyeriana for high-performance supercapacitors

Hierarchical porous carbon materials with high surface area are facilely prepared by directly carbonizing carex meyeriana without any extra activation procedure. The as-prepared porous carbon samples possess high Brunauer–Emmett–Teller (BET) surface areas (in the?~?518–742 m² g^?1 range) and unique hierarchical porous structure containing macropore channels and mesopores and micropores developed in the wall of macropores. These intriguing characteristics make the as-prepared hierarchical porous carbon samples a promising electrode material for supercapacitors. The capacitive performance was measured in the three-electrode system with 6 M KOH electrolyte. The hierarchical porous carbon prepared at the carbonization temperature of 1000 °C presents a high specific capacitance of 178.6 F g^?1 at a current density of 0.5 A g^?1, a good rate performance ( about 65.2% retention ratio at the current density of 20 A g^?1), and an excellent cycling stability (no obvious performance fading after 10,000 cycles). In addition, the fabricated two-electrode device achieves an energy density of 4.33 Wh kg^?1 at a high power density of 5 kW kg^?1. These results provide a green and facile method to synthesize the electrode material from biomass for high-performance supercapacitors.

     

Single‐Crystalline,Metallic TiC Nanowires for Highly Robust and Wide‐Temperature Electrochemical Energy Storage

Customized electrode materials with good temperature adaptability and high‐rate capability are critical to the development of wide‐temperature power sources. Herein, high‐quality TiC nanowires are uniformly grown on flexible carbon cloth as free‐standing electric‐double‐layer supercapacitor electrode. The TiC nanowires, 20–40 nm wide and 3–6 µm long, are single‐crystalline and highly conductive that is close to typical metal. Symmetric supercapacitors are constructed with ionic liquid electrolyte and TiC nanowires electrodes as wide‐temperature and long‐cycle stable power source. Ultrastable high‐rate cycling life of TiC nanowire arrays electrodes is demonstrated with capacitance retention of 96.8% at 60 °C (≈440 F g^?1), 99% at 25 °C (≈400 F g^?1), and 98% at ?25 °C (≈240 F g^?1) after 50 000 cycles at 10 A g^?1. Moreover, due to high electrical conductivity, the TiC nanowire arrays show ultrafast energy release with a fast response time constant of ≈0.7 ms. The results demonstrate the viability of metal carbide nanostructures as wide‐temperature, robust electrode materials for high‐rate and ultrastable supercapacitors.     

Robust Production of Ultrahigh Surface Area Carbon Sheets for Energy Storage

Nanostructured carbon materials play essential roles in electrochemical energy storage devices. However, scalable production of high surface area carbon with a cost‐effective process while controlling the morphology is challenging. Herein, a one‐step procedure to produce carbon sheets with very high specific surface area up to 3411 m² g^?1 by direct pyrolysis of dipotassium ethylene diamine tetraacetate is reported. Unlike that of biomass‐pyrolyzed carbons, the surface area of prepared carbon sheets is not sensitive to pyrolysis conditions (e.g., heating temperature and time), which makes the production robust and scalable. Moreover, the pore structure is stable against posttreatments, including solvent washing, which are detrimental to that of graphene‐based soft sheet assemblies. When used as supercapacitor electrodes, the ultrahigh surface area carbon sheets (HSACS) show a high specific capacitance of 268 F g^?1 at 5 mV s^?1, and retain 70% of the capacitance at 100 times higher scan rate in 6 m KOH aqueous electrolyte. Furthermore, the HSACS also exhibit a high specific capacitance of 266 F g^?1 within a 1.6 V symmetric supercapacitor potential window in 2 m Li₂SO₄ aqueous electrolyte. The symmetric supercapacitor delivers a maximum specific energy of 23.6 W h kg^?1 and high power density of 6.4 kW kg^?1.     

Ionic Liquid‐Controlled Growth of NiCo2S4 3D Hierarchical Hollow Nanoarrow Arrays on Ni Foam for Superior Performance Binder Free Hybrid Supercapacitors

A significant development in the design of a NiCo₂S₄ 3D hierarchical hollow nanoarrow arrays (HNA)‐based supercapacitor binder free electrode assembled by 1D hollow nanoneedles and 2D nanosheets on a Ni foam collector through controlling ionic liquid 1‐octyl‐3‐methylimidazolium chloride ([OMIm]Cl) concentration is reported. The unique NiCo₂S₄‐HNA electrode acquires high specific capacity (1297 C g^?1 at 1 A g^?1, 2.59 C cm^?2 at 2 mA cm^?2), excellent rate capability (maintaining 73.0% at 20 A g^?1), and long operational life (maintaining 92.4% after 10 000 cycles at 5 A g^?1), which are superior to those for 1D hollow nanoneedle arrays (HNN) and 2D porous nanoflake arrays (PNF). The outstanding electrochemical performance is attributed to the novel 3D structure with large specific surface, hollow cores, high porosity as well as stable architecture. In addition, a hybrid supercapacitor applying 3D NiCo₂S₄‐HNA as the positive electrode and active carbon as the negative electrode exhibits a high energy density of 42.5 Wh kg^?1 at a power density of 2684.2 W kg^?1 in an operating voltage of 1.6 V. Robust cycling stability is also expressed with 84.9% retention after repeating 10 000 cycles at 5 A g^?1, implying their great potential in superior‐performance supercapacitors.     

Titanium Disulfide Coated Carbon Nanotube Hybrid Electrodes Enable High Energy Density Symmetric Pseudocapacitors

While electrochemical supercapacitors often show high power density and long operation lifetimes, they are plagued by limited energy density. Pseudocapacitive materials, in contrast, operate by fast surface redox reactions and are shown to enhance energy storage of supercapacitors. Furthermore, several reported systems exhibit high capacitance but restricted electrochemical voltage windows, usually no more than 1 V in aqueous electrolytes. Here, it is demonstrated that vertically aligned carbon nanotubes (VACNTs) with uniformly coated, pseudocapacitive titanium disulfide (TiS₂) composite electrodes can extend the stable working range to over 3 V to achieve a high capacitance of 195 F g^?1 in an Li‐rich electrolyte. A symmetric cell demonstrates an energy density of 60.9 Wh kg^?1—the highest among symmetric pseudocapacitors using metal oxides, conducting polymers, 2D transition metal carbides (MXene), and other transition metal dichalcogenides. Nanostructures prepared by an atomic layer deposition/sulfurization process facilitate ion transportation and surface reactions to result in a high power density of 1250 W kg^?1 with stable operation over 10 000 cycles. A flexible solid‐state supercapacitor prepared by transferring the TiS₂–VACNT composite film onto Kapton tape is demonstrated to power a 2.2 V light emitting diode (LED) for 1 min.     

One‐Step Synthesis of Monodispersed Mesoporous Carbon Nanospheres for High‐Performance Flexible Quasi‐Solid‐State Micro‐Supercapacitors

Cost‐effective synthesis of carbon nanospheres with a desirable mesoporous network for diversified energy storage applications remains a challenge. Herein, a direct templating strategy is developed to fabricate monodispersed N‐doped mesoporous carbon nanospheres (NMCSs) with an average particle size of 100 nm, a pore diameter of 4 nm, and a specific area of 1093 m² g^?1. Hexadecyl trimethyl ammonium bromide and tetraethyl orthosilicate not only play key roles in the evolution of mesopores but also guide the assembly of phenolic resins to generate carbon nanospheres. Benefiting from the high surface area and optimum mesopore structure, NMCSs deliver a large specific capacitance up to 433 F g^?1 in 1 m H₂SO₄. The NMCS electrodes–based symmetric sandwich supercapacitor has an output voltage of 1.4 V in polyvinyl alcohol/H₂SO₄ gel electrolyte and delivers an energy density of 10.9 Wh kg^?1 at a power density of 14014.5 W kg^?1. Notably, NMCSs can be directly applied through the mask‐assisted casting technique by a doctor blade to fabricate micro‐supercapacitors. The micro‐supercapacitors exhibit excellent mechanical flexibility, long‐term stability, and reliable power output.     

Rational Construction of Hollow Core‐Branch CoSe2 Nanoarrays for High‐Performance Asymmetric Supercapacitor and Efficient Oxygen Evolution

Metal selenides have great potential for electrochemical energy storage, but are relatively scarce investigated. Herein, a novel hollow core‐branch CoSe₂ nanoarray on carbon cloth is designed by a facile selenization reaction of predesigned CoO nanocones. And the electrochemical reaction mechanism of CoSe₂ in supercapacitor is studied in detail for the first time. Compared with CoO, the hollow core‐branch CoSe₂ has both larger specific surface area and higher electrical conductivity. When tested as a supercapacitor positive electrode, the CoSe₂ delivers a high specific capacitance of 759.5 F g^?1 at 1 mA cm^?2, which is much larger than that of CoO nanocones (319.5 F g^?1). In addition, the CoSe₂ electrode exhibits excellent cycling stability in that a capacitance retention of 94.5% can be maintained after 5000 charge–discharge cycles at 5 mA cm^?2. An asymmetric supercapacitor using the CoSe₂ as cathode and an N‐doped carbon nanowall as anode is further assembled, which show a high energy density of 32.2 Wh kg^?1 at a power density of 1914.7 W kg^?1, and maintains 24.9 Wh kg^?1 when power density increased to 7354.8 W kg^?1. Moreover, the CoSe₂ electrode also exhibits better oxygen evolution reaction activity than that of CoO.     

The effect of activation methods on the electrochemical performance of ordered mesoporous carbon for supercapacitor applications

Ordered mesoporous carbon (CMK-3) was fabricated by a simple nanocasting method using SBA-15 as a hard template. The CMK-3 had a two-dimensional hexagonal mesoporous structure and a specific surface area of approximately 975.9 m² g^?1. The CMK-3 was modified by HNO₃ solutions with magnetic stirring and ultrasonic activation, respectively, to explore the influence of various activation methods on pore structure, surface state, morphology, and electrochemical performance. The CMK-3 modified by ultrasonic activation (CMK-3-US) reached the optimal specific capacitance of 233.4 A g^?1 at 0.5 A g^?1 and retained 94.2% after 500 cycles in 3 M KOH electrolyte. Furthermore, a symmetric supercapacitor was successfully assembled using CMK-3-US electrodes, which delivered an excellent energy density of 21.5 Wh kg^?1 at a power density of 225 W kg^?1 and exhibited great long-term stability with 97.5% retention after 4000 cycles. Compared to magnetic stirring activation, ultrasonic cavitation could better increase the efficiency of the HNO₃ activation for mesoporous carbon particles. The results indicate ultrasonic activation is an efficient way to modify carbon-based electrode materials for supercapacitors.     

Flexible carbon@graphene composite cloth for advanced lithium–sulfur batteries and supercapacitors with enhanced energy storage capability

Flexible carbon@graphene composite cloth was fabricated, and the resultant composite cloth consists of core–shell hollow structured carbon/graphene hybrid fibers with abundant micro- and mesoporosity and hydrophilic functionality. These unique features enable the composite cloth to be a promising material for energy storage application. As an efficient polysulfide adsorbent, the composite can be applied in lithium–sulfur batteries by being sandwiched between the sulfur cathode and polymeric separator. With this novel configuration, a high reversible capacity of ca. 900 mAh g^?1 and excellent cycle-life has been achieved, which is ascribed to the excellent polysulfides adsorption and confinement capability of the special core–shell and hollow structured porous hybrid fibers. Additionally, the composite cloth can be applied in supercapacitors as a flexible binder-free electrode, exhibiting a high specific capacitance of 271 F g^?1 (360 F cm^?3) at 0.1 A g^?1 in 6 M KOH, as well as excellent rate capability and cycling stability. The assembled symmetric supercapacitor supplies a high energy density of up to 9.4 Wh kg^?1 (12.5 Wh L^?1) with a power density of 25.0 W kg^?1 (33.3 W L^?1) and remains 5.7 Wh kg^?1 (7.6 Wh L^?1) with 4.5 kW kg^?1 (6.0 kW L^?1).     

High‐Performance 2.6 V Aqueous Asymmetric Supercapacitors based on In Situ Formed Na0.5MnO2 Nanosheet Assembled Nanowall Arrays

The voltage limit for aqueous asymmetric supercapacitors is usually 2 V, which impedes further improvement in energy density. Here, high Na content Birnessite Na_0.5MnO₂ nanosheet assembled nanowall arrays are in situ formed on carbon cloth via electrochemical oxidation. It is interesting to find that the electrode potential window for Na_0.5MnO₂ nanowall arrays can be extended to 0–1.3 V (vs Ag/AgCl) with significantly increased specific capacitance up to 366 F g^?1. The extended potential window for the Na_0.5MnO₂ electrode provides the opportunity to further increase the cell voltage of aqueous asymmetric supercapacitors beyond 2 V. To construct the asymmetric supercapacitor, carbon‐coated Fe₃O₄ nanorod arrays are synthesized as the anode and can stably work in a negative potential window of ?1.3 to 0 V (vs Ag/AgCl). For the first time, a 2.6 V aqueous asymmetric supercapacitor is demonstrated by using Na_0.5MnO₂ nanowall arrays as the cathode and carbon‐coated Fe₃O₄ nanorod arrays as the anode. In particular, the 2.6 V Na_0.5MnO₂//Fe₃O₄@C asymmetric supercapacitor exhibits a large energy density of up to 81 Wh kg^?1 as well as excellent rate capability and cycle performance, outperforming previously reported MnO₂‐based supercapacitors. This work provides new opportunities for developing high‐voltage aqueous asymmetric supercapacitors with further increased energy density.     

Core–Shell Nitrogen‐Doped Carbon Hollow Spheres/Co3O4 Nanosheets as Advanced Electrode for High‐Performance Supercapacitor

Co₃O₄/nitrogen‐doped carbon hollow spheres (Co₃O₄/NHCSs) with hierarchical structures are synthesized by virtue of a hydrothermal method and subsequent calcination treatment. NHCSs, as a hard template, can aid the generation of Co₃O₄ nanosheets on its surface; while SiO₂ spheres, as a sacrificed‐template, can be dissolved in the process. The prepared Co₃O₄/NHCS composites are investigated as the electrode active material. This composite exhibits an enhanced performance than Co₃O₄ itself. A higher specific capacitance of 581 F g^?1 at 1 A g^?1 and a higher rate performance of 91.6% retention at 20 A g^?1 are achieved, better than Co₃O₄ nanorods (318 F g^?1 at 1 A g^?1 and 67.1% retention at 20 A g^?1). In addition, the composite is employed as a positive electrode to fabricate an asymmetric supercapacitor. The device can deliver a high energy density of 34.5 Wh kg^?1 at the power density of 753 W kg^?1 and display a desirable cycling stability. All of these attractive results make the unique hierarchical Co₃O₄/NHCS core–shell structure a promising electrode material for high‐performance supercapacitors.