Ultrastretchable,Super Tough,and Rapidly Recoverable Nanocomposite Double‐Network Hydrogels by Dual Physically Hydrogen Bond and Vinyl‐Functionalized Silica Nanoparticles Macro‐Crosslinking

It remains a challenge to develop tough hydrogels with recoverable or healable properties after damage. Herein, a new nanocomposite double‐network hydrogel (NC‐DN) consisting of first agar network and a homogeneous vinyl‐functionalized silica nanoparticles (VSNPs) macro‐crosslinked polyacrylamide (PAM) second network is reported. VSNPs are prepared via sol‐gel process using vinyltriethoxysilane as a silicon source. Then, Agar/PAM‐SiO₂ NC‐DN hydrogels are fabricated by dual physically hydrogen bonds and VSNPs macro‐crosslinking. Under deformation, the reversible hydrogen bonds in agar network and PAM nanocomposite network successively break to dissipate energy and then recombine to recover the network, while VSNPs in the second network could effectively transfer stress to the network chains grafted on their surfaces and maintain the gel network. As a result, the optimal NC‐DN hydrogels exhibit ultrastretchable (fracture strain 7822%), super tough (fracture toughness 18.22 MJ m^‐3, tensile strength 431 kPa), rapidly recoverable (≈92% toughness recovery after 5 min resting at room temperature), and self‐healable (can be stretched to 1331% after healing) properties. The newly designed Agar/PAM‐SiO₂ NC‐DN hydrogels with tunable network structure and mechanical properties by multi‐bond crosslinking provide a new avenue to better understand the fundamental structure‐property relationship of DN hydrogels and broaden the current hydrogel research and applications.     

A Facile Strategy for Preparing Tough,Self‐Healing Double‐Network Hyaluronic Acid Hydrogels Inspired by Mussel Cuticles

Compared with hydrogel‐like biological tissues such as cartilage, muscles, and blood vessels, current hyaluronic acid hydrogels often suffer from poor toughness and limited self‐healing properties. Herein, a facile and generalizable strategy inspired by mussel cuticles is presented to fabricate tough and self‐healing double‐network hyaluronic acid hydrogels. These hydrogels are composed of ductile, reversible Fe³⁺‐catechol interaction primary networks, and secondarily formed brittle, irreversible covalent networks. Based on this design strategy, the hyaluronic acid hydrogels are demonstrated to exhibit reinforced mechanical strength while maintaining a rapid self‐healing property. In addition, by simply regulating pH or UV irradiation time, the mechanical properties of the hydrogels can be regulated conveniently through variations between the primary and secondary networks.     

Highly Mechanical and Fatigue‐Resistant Double Network Hydrogels by Dual Physically Hydrophobic Association and Ionic Crosslinking

Double network (DN) hydrogels with high strength and toughness are considered as promising soft materials. Herein, a dual physically cross‐linked hydrophobic association polyacrylamide (HPAAm)/alginate‐Ca²⁺ DN hydrogel is reported, consisting of a HPAAm network and a Ca²⁺ cross‐linked alginate network. The HPAAm/alginate‐Ca²⁺ DN hydrogel exhibits excellent mechanical properties with the fracture stress of 1.16 MPa (3.0 and 1.7 times higher than that of HPAAm hydrogel and HPAAm/alginate hydrogel, respectively), fracture strain of 2604%, elastic modulus of 71.79 kPa, and toughness of 14.20 MJ m^?3. HPAAm/alginate‐Ca²⁺ DN hydrogels also demonstrate self‐recovery, notch‐insensitivity, and fatigue resistance properties without any external stimuli at room temperature through reversible physical bonds consisting of hydrophobic association and ionic crosslinking. As a result, the dual physical crosslinking would offer an avenue to design DN hydrogels with desirable properties for broadening current applications of soft materials.     

In situ injectable poly(γ‐glutamic acid) based biohydrogel formed by enzymatic crosslinking

Enzymatic crosslinking was developed to prepare in situ forming poly(γ‐glutamic acid) (γ‐PGA) based hydrogel in this study. First, the precursor of poly(γ‐glutamic acid)–tyramine (γ‐PGA–Ty) was synthesized through the reaction of carboxyl groups from a γ‐PGA backbone with tyramine. The structure of the grafted precursor was confirmed by ¹H‐NMR and Fourier transform infrared spectroscopy. After that, the crosslinking of the phenol‐containing γ‐PGA–Ty precursor was triggered by horseradish peroxidase in the presence of H₂O₂; this resulted in the formation of the γ‐PGA–Ty hydrogels. The equilibrium water content, morphology, enzymatic degradation rate, and mechanical properties of the hydrogels were characterized in detail. The data revealed that the well‐interconnected hydrogels had tunable water contents, mechanical properties, and degradability through adjustments of the composition. Furthermore, cell experiments proved the biocompatibility of the hydrogels by 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide assay. These characteristics provide an opportunity for the in situ formation of injectable biohydrogels as potential candidates in cell encapsulation and drug delivery. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42301.     

Highly stretchable,tough, and self‐recoverable and self‐healable dual physically crosslinked hydrogels with synergistic “soft and hard” networks

Strength, toughness and self‐recoverability are among the most important properties of hydrogels for tissue‐engineering applications. Yet, it remains a challenge to achieve these desired properties from the synthesis of a single‐polymer hydrogel. Here, we report our one‐pot, a monomer‐polymerization approach to addressing the challenge by creating dual physically crosslinked hybrid networks, in particular, synergistic “soft and hard” polyacrylic acid‐Fe³⁺ hydrogels (SHPAAc‐Fe³⁺). Favorable mechanical properties achieved from such SHPAAc‐Fe³⁺ hydrogels included high tensile strength (about 1.08 MPa), large elongation at break (about 38 times), excellent work of extension (about 19 MJ m^?3), and full self‐recoverability (100% recovery of initial properties within 15 min at 50°C and within 60 min in ambient conditions, respectively). In addition, the hydrogels exhibited good self‐healing capabilities at ambient conditions (about 40% tensile strength recovery without any external stimuli). This work demonstrates that dual physical crosslinking combining hydrophobic interaction and ionic association can be achieved in single‐polymer hydrogels with significantly improved mechanical performance but without sacrificing favorable properties. POLYM. ENG. SCI., 59:145–154, 2019. © 2018 Society of Plastics Engineers     

Hybrid double‐network hydrogel based on poly(aspartic acid) and poly(acryl amide) with improved mechanical properties

Hydrogels usually have a smaller mechanical strength and toughness than generic polymeric materials. Therefore, many studies report improvements for mechanical properties of hydrogels by preparing double‐network hydrogels, nanocomposite hydrogels, and nanostructured hydrogels. In this study, interpenetrating‐type dually‐crosslinked hydrogels were prepared via free radical crosslinking polymerization of acrylamide monomers in the presence of poly(aspartic acid) and subsequent immersion in a metal ion containing aqueous solution to induce extra physical crosslinking through ionic or coordination bonding. Using this approach, the mechanical properties of inherently weak and brittle homopolymer gels could be improved via interpenetrating the double network formed by both covalent bonding and metal coordination‐assisted reversible physical crosslinks. The preparation, swelling behavior, morphology, and mechanical properties of these hydrogels are presented. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45925.     

Effect of intercalated hydrotalcite on swelling and mechanical behavior for poly(acrylic acid‐co‐N‐isopropylacrylamide)/hydrotalcite nanocomposite hydrogels

A series of nanocomposite hydrogels were prepared from acrylic acid (AA), N‐isopropylacrylamide (NIPAAm), and intercalated hydrotalcite (IHT) by photopolymerization. The influence of the intercalating content of 2‐acrylamido‐2‐methyl propane sulfonic acid (AMPS) in HT on the swelling and mechanical properties for poly(AA‐co‐NIPAAm)/IHT nanocomposite hydrogels was investigated. The results showed that the higher the content of the AMPS‐HT was, the higher the swelling ratio of the gels and the higher the content of the intercalating agent was, the lower swelling ratio. It was also demonstrated that the swelling ratio of the gel was not affected by the counterion in HT. The gel strength and crosslinking density were not enhanced by adding AMPS‐HT into the gel composition, but the maximum effective crosslink density and shear modulus of the nanocomposite hydrogels were increased with an increase of the content of the intercalating agent in HT. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1572–1580, 2005     

The synthesis and characteristics of sodium alginate/graphene oxide composite films crosslinked with multivalent cations

Association of a method of the incorporation of graphene oxide (GO) into sodium alginate (Na‐alg) polymer matrix with a method of the use multivalent cations crosslinker was put forward to synthesize novel Na‐alg/GO nanocomposite films. The structures, morphologies, and the properties of Na‐alg/GO films were characterized by Fourier transform infrared (FTIR) spectroscopy, X‐ray diffraction (XRD), field‐emission scanning electron microscopy (FE‐SEM), thermogravimetric analysis (TGA), and tensile tests. The results revealed that the interlayer distance of GO sheets increased from 0.83 nm to 1.08 nm after assembling with Na‐alg, and Na‐alg inserted into GO layers crosslinking with multivalent cations increased the interlayer distance further. Ionic crosslinking significantly enhanced thermal and mechanical properties of Na‐alg/GO nanocomposite films. In particular, Fe³⁺ led to Na‐alg/GO nanocomposite films of significantly higher tensile strength and modulus than Ca²⁺ and Ba²⁺. The excellent thermal and mechanical properties of these novel Na‐alg/GO nanocomposite films may open up applications for Na‐alg films. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43616.     

Gelation via cationic chelation/crosslinking of acrylic‐acid‐based polymers

The gelation characteristics of acrylic‐acid‐based polymers in the presence of a range of cationic species, namely Ca²⁺, Mg²⁺ and Al³⁺, were investigated using in situ rheological measurements during photo‐polymerisation. Fourier transform mechanical spectroscopy was used to identify the gel point, using the Winter–Chambon criteria which allow the gel point to be pinpointed by establishing the sample spanning network and quantitatively determining stiffness, relaxation exponent, gel stiffness and fractal dimensions. The results showed that the gelation processes were greatly influenced by the type of cationic species that was used in the syntheses. At the gel point, more open network clusters were formed when Al³⁺ cations were used instead of Ca²⁺ cations or Mg²⁺ cations, all relating to chloride salts. Although the concentrations of the chelating/crosslinking aluminium species affected the kinetics of the gelation, the critical gel characteristics were hardly affected. Also the solubility of the chosen aluminium salt was shown to dictate the crosslinking rates and the properties of the critical gels. The extents of the reactions and the types of network formed at the gel point and beyond indicated that reactions between the Al³⁺ ions and COOH sites, from growing poly(acrylic acid) molecular chains, differ from those exhibited by Mg²⁺ and Ca²⁺ ions. All of the chelation/crosslinking reactions met the criteria of low mutation number (N_mu), such that in all cases N_mu ? 1. © 2019 Society of Chemical Industry     

Dual Cross‐Linked Hydrogels with High Strength,Toughness, and Rapid Self‐Recovery Using Dynamic Metal–Ligand Interactions

A dual cross‐linking design principle enables access to hydrogels with high strength, toughness, fast self‐recovery, and robust fatigue resistant properties. Imidazole (IMZ) containing random poly(acrylamide‐co‐vinylimidazole) based hydrogels are synthesized in the presence of Ni²⁺ ions with low density of chemical cross‐linking. The IMZ‐Ni²⁺ metal–ligand cross‐links act as sacrificial motifs to effectively dissipate energy during mechanical loading of the hydrogel. The hydrogel mechanical properties can be tuned by varying the mol% of vinylimidazole (VIMZ) in the copolymer and by changing the VIMZ/Ni²⁺ ratio. The resultant metallogels under optimal conditions (15 mol% VIMZ and VIMZ/Ni²⁺ = 2:1) show the best mechanical properties such as high tensile strength (750 kPa) and elastic modulus (190 kPa), combined with high fracture energy (1580 J m^?2) and stretchability (800–900% strain). The hydrogels are pH responsive and the extent of energy dissipation can be drastically reduced by exposure to acidic pH. These hydrogels also exhibit excellent anti‐fatigue properties (complete recovery of dissipated energy within 10 min after ten successive loading–unloading cycles at 400% strain), high compressive strength without fracture (17 MPa at 96% strain), and self‐healing capability due to the reversible dissociation and re‐association of the metal ion mediated cross‐links.     

Rapid pH‐dependent phase transition and elasticity of stimuli‐responsive cationic poly(N,N‐dimethylaminoethyl methacrylate) hydrogels prepared with a dimethacrylate crosslinker

Stimuli‐responsive hydrogels prepared from poly(N,N‐dimethylaminoethyl methacrylate) (PDMAEMA) and its copolymers have attracted much interest to serve in biomedical and pharmaceutical applications. To investigate pH‐dependent swelling and elasticity, a series of cationic hydrogels based on N,N‐dimethylaminoethyl methacrylate were prepared by free radical crosslinking copolymerization at 60 °C in the presence of tetraethylene glycol dimethacrylate as the crosslinker. The equilibrium swelling and the mechanical properties of the PDMAEMA hydrogels were investigated as a function of the gel preparation concentration. To explain the effect of pH on the equilibrium swelling of the hydrogels, pH‐dependent swelling studies were carried out in solutions of pH ranging from 2.1 to 10.7. It was found that the PDMAEMA hydrogels exhibit a rapid pH‐dependent phase transition in aqueous solutions; that is, the gels first remain in the swollen state at acidic pH then collapse in a very narrow range of pH. The results showed that the volume of PDMAEMA hydrogels in acidic conditions is about 10‐ to 40‐fold larger than that in the basic pH region. By using the Flory–Rehner theory, the characteristic network parameters of the PDMAEMA hydrogels were calculated and good agreement obtained between the swelling equilibria of hydrogels and their mechanical properties over the whole range of gel preparation concentration. © 2012 Society of Chemical Industry     

Ethylenediamine tetraacetic acid modification of crosslinked chitosan designed for a novel metal‐ion adsorbent

Novel chitosan‐based adsorbent materials were synthesized with a higher fatty diacid diglycidyl as a crosslinking agent, and the adsorption ability of the resulting polymers for several metal ions was evaluated. Selective adsorption for Cu²⁺ in comparison with other divalent metal ions, such as Ni²⁺, Pb²⁺, Cd²⁺, and Ca²⁺, was observed with the crosslinked chitosan sorbent at pH 6; however, the adsorption power decreased abruptly as the pH value of the solution decreased. The addition of ethylenediamine tetraacetic acid (EDTA) residues to crosslinked chitosan significantly enhanced the adsorption power for metal ions, especially for Ca²⁺. The adsorptivity of Ca²⁺ was dramatically improved with the introduction of EDTA residues, and the value was greater than that obtained with a commercial chelate resin (CR11). Although the adsorption power of the EDTA‐derivatized sorbent for other metal ions was just comparable to that of the CR11 material, the newly synthesized adsorbent could be used for the recovery of metal ions from industrial waste solutions with a relatively wide range of pHs, from 4.0 to 6.0. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2758–2764, 2004     

Mechanical properties of poly(N‐isopropyl‐acrylamide‐co‐itaconic acid) hydrogels

Hydrogels of N‐isopropylacrylamide and itaconic acid were synthesized with different monomer ratios and with two crosslinking agent concentrations. The different xerogels were immersed in water and the swelling process was conducted up to equilibrium conditions at two temperatures (22 and 37°C). These temperatures are lower and higher than the transition temperature shown by PNIPA hydrogels. The mechanical properties of the different solvated hydrogels were examined by oscillatory shear measurements at 22 and 37°C. The copolymer volume fraction and the elastic storage modulus of the hydrogels decreased as the itaconic acid percentage in the copolymer increased. This behavior was attributed to the higher hydrophilic character of the itaconic acid comonomer. Effective crosslinking density, molar mass between crosslinks, and the polymer–solvent interaction parameter were determined from the experimental values of the elastic storage moduli and the copolymer volume fractions. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 2540–2545, 2002     

Comparison the properties of PVA/Na+‐MMT nanocomposite hydrogels prepared by physical and physicochemical crosslinking

A novel physicochemical crosslinked nanocomposite hydrogel based on polyvinyl alcohol (PVA) and natural Na‐montmorillonite (Na⁺‐MMT) was synthesized by chemical crosslinking of nanocomposite hydrogel followed by a freezing‐thawing process. The effects of physical crosslinking, as well as physicochemical crosslinking, on the structure, morphology, and properties (thermal, mechanical, swelling, and deswelling) of nanocomposite hydrogels were investigated and compared with each other. The structure and morphology of nanocomposites were studied by Fourier transform infrared, X‐ray diffraction, field emission scanning electron microscopy, and transmission electron microscopy techniques. The thermal and mechanical properties of nanocomposites that were affected by physical and physicochemical crosslinking were evaluated by thermogravimetric analysis, differential scanning calorimeter, dynamic mechanical analysis, hardness test, and Water vapor transmission rate (WVTR) experiments. The results showed that the physicochemical crosslinking of a PVA nanocomposite leads to a reduction in crystallinity and melting temperature, as well as an increase in the Hardness and WVTR compared to a physically crosslinked PVA nanocomposite hydrogel. The swelling and deswelling experiments were performed using a gravimetric method, and it was shown that controlled crosslinking of PVA nanocomposite hydrogel with glutaraldehyde causes the swelling ratio to increase and the cumulative amount of water loss to decrease. The swelling (sorption) and deswelling (desorption) kinetics data for physically and physicochemical crosslinking of nanocomposite hydrogels were fitted with a fickian model. It is concluded that through control crosslinking of PVA nanocomposite can lead to a hydrogel with higher swelling capacity than that is in conventional PVA nanocomposite hydrogel. POLYM. COMPOS., 37:897–906, 2016. © 2014 Society of Plastics Engineers     

Synthesis of poly(acrylic acid)–Fe3+/gelatin/poly(vinyl alcohol) triple‐network supramolecular hydrogels with high toughness,high strength and self‐healing properties

Hydrogels with good mechanical and self‐healing properties are of great importance for various applications. Poly(acrylic acid)–Fe³⁺/gelatin/poly(vinyl alcohol) (PAA‐Fe³⁺/Gelatin/PVA) triple‐network supramolecular hydrogels were synthesized by a simple one‐pot method of copolymerization, cooling and freezing/thawing. The PAA‐Fe³⁺/Gelatin/PVA triple‐network hydrogels exhibit superior toughness, strength and recovery capacity compared to single‐ and double‐network hydrogels. The mechanical properties of the synthesized hydrogels could be tailored by adjusting the compositions. The PAA‐Fe³⁺/Gelatin/PVA triple‐network hydrogel with 0.20 mmol Fe³⁺, 3% gelatin and 15% PVA could achieve good mechanical properties, the tensile strength and elongation at break being 239.6 kPa and 12.8 mm mm^?1, respectively, and the compression strength reaching 16.7 MPa under a deformation of about 91.5%. The synthesized PAA‐Fe³⁺/Gelatin/PVA triple‐network hydrogels have good self‐healing properties owing to metal coordination between Fe³⁺ and carboxylic groups, hydrogen bonding between the gelatin chains and hydrogen bonding between the PVA chains. Healed PAA‐Fe³⁺(0.20)/Gelatin3%/PVA15% triple‐network hydrogels sustain a tensile strength of up to 231.4 kPa, which is around 96.6% of the tensile strength of the original samples. Therefore, the synthesized triple‐network supramolecular hydrogels would provide a new strategy for gel research and expand the potential for their application. © 2019 Society of Chemical Industry     

Controlled mechanical and swelling properties of poly(vinyl alcohol)/sodium alginate blend hydrogels prepared by freeze–thaw followed by Ca2+ crosslinking

Poly(vinyl alcohol) (PVA)/sodium alginate (SA) blend hydrogels have immense potential for use as functional biomaterials. Understanding of influences of processing parameters and compositions on mechanical and swelling properties of PVA/SA blend hydrogels is very important. In this work, PVA/SA blend hydrogels with different SA contents were prepared by applying freeze–thaw method first to induce physical crosslinking of PVA chains and then followed by Ca²⁺ crosslinking SA chains to form interpenetrating networks of PVA and SA. The effects of number of freeze–thaw cycles, SA content and Ca²⁺ concentration on mechanical properties, swelling kinetics, and pH‐sensitivity of the blend hydrogels were investigated. The results showed that the blend hydrogels have porous sponge structure. Gel fraction, which is related to crosslink density of the blend hydrogels, increased with the increase of freeze–thaw cycles and strongly depended on SA content. The SA content exerts a significant effect on mechanical properties, swelling kinetics, and pH‐sensitivity of the blend hydrogels. The number of freeze–thaw cycles has marked impact on mechanical properties, but no obvious effect on the pH‐sensitivity of the PVA/SA blend hydrogels. Concentration of CaCl₂ aqueous solution also influences mechanical properties and pH‐sensitivity of the blend hydrogel. By altering composition and processing parameters such as freeze–thaw cycles and concentration of CaCl₂ aqueous solution, the mechanical properties and pH‐sensitivity of PVA/SA blend hydrogels can be tightly controlled. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Preparation and characterization of composite hydrogels based on crosslinked hyaluronic acid and sodium alginate

In this study, a novel composite hydrogel with improved cellular structure and mechanical properties was prepared by the crosslinking of hyaluronic acid (HA) and sodium alginate (SAL). The amide linkages (covalent bonds) in the hydrogel that we expected to form were confirmed by Fourier transform infrared spectroscopy. The hydrogels had a pore size larger than 100 μm and were observed by scanning electron microscopy. Texture profile analysis indicated that the hardness of the hydrogels was enhanced by an increase in the polymer's concentration, but it declined with an increase in the HA/SAL molar ratio. The swelling capacity was reduced with increases in the polymer's concentration and the 1‐ethyl‐3‐(3‐dimethyl aminopropyl)‐1‐carbodiimide hydrochloride (EDC)/HA molar ratio, and it was enhanced by an increase in the HA/SAL molar ratio. The resistance against hyaluronidase was negatively correlated with the proportion of HA in the hydrogels and positively correlated with the EDC/HA molar ratio. Given the improved physicochemical properties that we produced, these novel hydrogels may have the potential to be applied in tissue engineering scaffolding. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41898.     

Effect of CaO in the thermal crosslinking of maltodextrin and citric acid: A cooperative action of condensation and ionic interactions

The study of the effect of CaO in the thermal crosslinking of maltodextrin with citric acid demonstrates that the addition of small amount of this compound enhances the crosslinking of the cured system under processing conditions. This enhancement of the crosslinking leads to a noticeable improvement of the mechanical properties. The mechanism of the enhanced crosslinking reaction has been deeply analyzed by rheology, FT‐IR, and TGA. The rheological results show that CaO contributes to the crosslinking. This contribution would allow decreasing 10 °C the temperature of curing process. The enhancement of the crosslinking and consequent improvement of mechanical properties is explained by the contribution of the interactions between the Ca²⁺ and citric acid and the polycondensate network formed between maltodextrin and citric acid. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44203.     

Harmless hydrogels based on PVA/Na+‐MMT nanocomposites for biomedical applications: Fabrication and characterization

A series of nanocomposite hydrogels were prepared by a freeze‐thaw process, using polyvinyl alcohol (PVA) as polymer matrix and 0–10 wt% of hydrophilic natural Na‐montmorillonite (Na⁺‐MMT), free from any modification, as composite aggregates. The effect of nanoclay content and the sonication process on the nanocomposite microstructure and morphology as well as its properties (physical, mechanical, and thermal) were investigated. The microstructure and morphology were investigated by Fourier transform infrared spectroscopy, field emission scanning electron microscopy, transmission electron microscopy, atomic force microscopy, and X‐ray diffraction technique. The thermal stability and mechanical properties of nanocomposite hydrogels were examined using thermogravimetric analysis, differential scanning calorimetry, dynamic mechanical analysis; moreover hardness and water vapor transmission rate measurements. It was concluded that the microstructure, morphology, physical (thermal) and mechanical properties of nanocomposite hydrogels have been modified followed by addition of nanoclay aggregates. The results showed that Na⁺‐MMT may act as a co‐crosslinker. Based on the results obtained, the nanocomposite hydrogel PVA/Na⁺‐MMT synthesized by a freeze‐thaw process, appeared to be a good candidate for biomedical applications. POLYM. COMPOS., 38:1135–1143, 2017. © 2015 Society of Plastics Engineers     

Synthesis and characterization of dextran hydrogels prepared with chlor‐ and nitrogen‐containing crosslinkers

In this study, we have synthesized dextran hydrogels by the crosslinking reactions of dextran with some selective Cl‐, and N‐containing functional monomers, such as epichlorohydrin (ECH), N,N′‐methylenebisacrylamide (MBAm), and glutaraldehyde (GA). Crosslinking reactions were carried out in the basic aqueous solutions (2.8NNaOH) at 25–50°C. The optimum conditions for effective crosslinking, i.e., temperature, crosslinking time, and amount of crosslinker, were determined for each system. The hydrogel discs of 3 mm diameter and 1.5 mm thickness were subjected to a number of Tris‐buffer solutions of desired pH (2.0–9.0) at 37°C. Swelling kinetics of the hydrogels were evaluated with second–order swelling model. The pH‐dependent swelling of hydrogels was strongly influenced by the functional group of crosslinker and crosslinker content. While the hydrogels prepared with ECH and MBAm shows higher swelling ability at basic medium than that of acidic medium, GA‐containing hydrogels exhibited just the opposite behavior. Mesh sizes (ξ) and average molecular weights between crosslinks (M_c) were estimated from swelling data using the Flory‐Rehner theory. Characterization studies were completed by Fourier transform infrared spectroscopy and thermal gravimetric analysis. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:4213–4221, 2006