Photo-mediated copper(I)-catalyzed azide-alkyne cycloaddition (CuAAC) “click” reactions for forming polymer networks as shape memory materials

The formation of polymer networks polymerized with the Copper (I) – catalyzed azide – alkyne cycloaddition (CuAAC) click reaction is described along with their accompanying utilization as shape memory polymers. Due to the click nature of the reaction and the synthetic accessibility of azide and alkyne functional-monomers, the polymer architecture was readily controlled through monomer design to manipulate crosslink density, ability for further functionalization, and the glass transition temperature (55–114 °C). Free strain recovery is used to quantify the shape memory properties of a model CuAAC network resulting in excellent shape fixity and recovery of 99%. The step growth nature of this polymerization results in homogenous network formation with narrow glass transitions ranges having half widths of the transition close to 15 °C for these materials resulting in shape recovery sharpness of 3.9%/°C in a model system comparable to similarly crosslinked chain growth polymers. Utilization of the CuAAC reaction to form shape memory materials opens a range of possibilities and behaviors that are not readily achieved in other shape memory materials such as (meth) acrylates, thiol-ene, thiol-Michael, and poly(caprolactone) based shape memory materials.     

Shape‐memory behaviors of biodegradable poly(L‐lactide‐co‐ϵ‐caprolactone) copolymers

A series of biodegradable poly(L ‐lactide‐co‐?‐caprolactone) (PCLA) copolymers with different chemical compositions are synthesized and characterized. The mechanical properties and shape‐memory behaviors of PCLA copolymers are studied. The mechanical properties are significantly affected by the copolymer compositions. With the ?‐caprolactone (?‐CL) content increasing, the tensile strength of copolymers decreases linearly and the elongation at break increases gradually. By means of adjusting the compositions, the copolymers exhibit excellent shape‐memory effects with shape‐recovery and shape‐retention rate exceeding 95%. The effects of composition, deformation strain, and the stretching conditions on the recovery stress are also investigated systematically. A maximum recovery stress around 6.2 MPa can be obtained at stretching at T_g ? 15°C to 200% deformation strain for the PCLA70 copolymer. The degradation results show that the copolymers with higher ?‐CL content have faster degradation rates and shape‐recovery rates, meanwhile, the recovery stress can maintain a relative high value after 30 days in vitro degradation. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

热塑性聚烯烃弹性体的单向形状记忆行为

以乙烯为单一原料采用串级催化体系制备了乙烯/1-己烯无规共聚物,具有从60℃到120℃宽的熔融峰,其储能模量在100 MPa 以下,研究此热塑性弹性体的形状记忆性质。采用DSC、DMA 等手段定量表征,结果表明,选择恰当的变形温度,共聚物的形状固定率和形状恢复率可达90%,实现较好的形状记忆性能。     

Effect of phenol end functional switching segments on the shape memory properties of epoxy‐cyanate ester system

The effect of phenol end functional shape memory oligomers on the shape memory properties of an epoxy‐cyanate ester resin system was examined. The basic resin system consisted of diglycidyl ether of bisphenol A (DGEBA) cured with bisphenol A dicyanate (BADC). For conferring the shape memory properties, the switching segment (SS) components selected are α, ω‐phenol‐terminated poly(tetramethyleneoxide) (PPTMO), poly(ε‐caprolactone) (PPCL), and poly(propylene glycol) (PPPG). Epoxy‐cyanate ester blend of defined composition was analyzed for thermal, mechanical, thermo‐mechanical, and shape memory properties at two concentrations of the three SSs. The transition temperature of heavily SS loaded matrix increased in the order: PPTMO < PPCL < PPPG commensurate with crystallizability of SS segments at ambient. For same reason flexural property showed an increasing trend. This is in league with the increased crystallizability of the shape memory polymer components. The shape fixity, recovery extent, and recovery time followed a reverse order: PPPG < PPCL < PPTMO. In contrast to the alcohol terminated shape memory components, phenol terminal groups were helpful in integrating the shape memory segments into the matrix by way of reaction with both epoxy and cyanate groups. The coreaction was conducive for achieving better shape memory properties and decreasing the transition temperature. A direct relation existed between the modulus ratio and the shape recovery property. Higher concentration of the SSs caused a diminution in transition temperature but enhanced the shape memory properties, though the mechanical properties were adversely affected. The shape recovery increased with increase in temperature. All polymers possessed good mechanical properties and thermal stability. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41196.     

Influence of heat treatment on the properties of shape memory fibers. I. Crystallinity,hydrogen bonding,and shape memory effect

Shape memory fibers (SMFs) were prepared via melt spinning. The fibers underwent different heat treatments to eliminate internal stress and structure deficiency caused during melt spinning. The influences of heat treatments on the SMF crystallinity, molecular orientation, hydrogen bonding, and shape memory behavior were studied. It was found with increasing heat‐treatment temperature, the soft segment crystallinity, crystallite dimension, and microphase separation increased, and the hydrogen bonding in the hard segment phase increased. Low temperature heat treatments decreased the shape recovery ratios while increasing the shape fixity ratios as a result of internal stress releasing and molecules disorientation. High temperature heat treatments increased the hard segment stability. Increasing heat‐treatment temperature resulted in the improvement of both the shape recovery and fixity, because it promoted the phase separation. The results from DSC, DMA, XRD, and FTIR were used to illustrate the mechanism governing these properties difference. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Lignin valorization by forming toughened thermally stimulated shape memory copolymeric elastomers: Evaluation of different fractionated industrial lignins

Lignin‐based thermal responsive dual shape memory copolymeric elastomers were prepared with a highly branched prepolymer (HBP, A₂B₃ type) via a simple one‐pot bulk polycondensation reaction. The effect of fractionated lignin type (with good miscibility in the HBP) on copolymer properties was investigated. The thermal and mechanical properties of the copolymers were characterized by DMA, DSC, and TGA. Tensile properties were dominated by HBP <45% lignin content while lignin dominated >45% content. The copolymers glass transition temperature (T_g) increased with lignin content and lignin type did not play a significant role. Thermally stimulated dual shape memory effects (SME) of the copolymers were quantified by cyclic thermomechanical tests. All copolymers had shape fixity rate >95% and >90% shape recovery for all compositions. The copolymer shape memory transition temperature (T_trans) increased with lignin content and T_trans was 20°C higher than T_g. Lignin, a renewable resource, can be used as a netpoint segment in polymer systems with SME behavior. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41389.     

Nanoindentation of shape memory polymer networks

This work examines the small-scale deformation and thermally induced recovery behavior of shape memory polymer networks as a function of crosslinking structure. Copolymer shape memory materials based on diethylene glycol dimethacrylate and polyethylene glycol dimethacrylate with a molecular weight of 550 crosslinkers and a tert-butyl acrylate linear chain monomer were synthesized with varying weight percentages of crosslinker from 0 to 100%. Dynamic mechanical analysis is used to acquire the bulk thermomechanical properties of the polymers, including the glass transition temperature and the elastic modulus over a wide temperature range. Instrumented nanoindentation is used to examine ambient temperature deformation of the polymer networks below their glass transition temperature. The glassy modulus of the networks measured using nanoindentation is relatively constant as a function of crosslinking density, and consistent with values extracted from monotonic tensile tests. The ambient temperature hardness of the networks increases with increasing crosslinking density, while the dissipated energy during indentation decreases with increasing crosslinking density. The changes in hardness correlated with the changes in glass transition but not changes in the rubbery modulus, both of which can scale with a change in crosslink density. Temperature induced shape recovery of the indentations is studied using atomic force microscopy. For impressions placed at ambient temperature, the indent shape recovery profile shifts to higher temperatures as crosslink density and glass transition temperature increase.     

Supramolecular semicrystalline polyolefin elastomer blends with triple‐shape memory effects

Supramolecular polyolefin elastomer blends possessing triple‐shape memory effects were prepared by melt blending of two semicrystalline maleated elastomers (maleated ethylene‐propylene‐diene rubber (mEPDM) and maleated polyethylene‐octene elastomer (mPOE)) in the presence of a small amount of 3‐amino‐1,2,4‐triazole (ATA). The amino group of ATA reacted with the maleic anhydride groups of both elastomers during melt blending to form supramolecular hydrogen‐bonded networks. Dynamic mechanical analysis of the blends showed drops in the storage modulus at two different transition temperatures (T_trans) belonging to the crystalline melting temperatures of each phase as well as a plateau above these two T_trans. This is an essential property for triple‐shape memory behavior. Dual‐shape memory properties of the blends were determined using one‐step programming under three different temperature ranges. When an individual crystalline phase is used for the fixing process, the switching temperature (T_sw) relates to the melting temperature of a particular phase during the recovery process. However, if both crystalline phases are used simultaneously for the fixing process, then the T_sw relates to the higher melting temperature. Cyclic two‐step programming revealed that two different shapes can be fixed, one by EPDM crystallization and the other by POE crystallization, and both programmed shapes can be recovered upon heating above a specific T_sw. © 2016 Society of Chemical Industry     

The influence of heat treatment on the properties of shape memory fibers. II. Tensile properties,dimensional stability,recovery force relaxation,and thermomechanical cyclic properties

Shape memory fibers (SMFs) were prepared via a melt spinning process. The fibers were subject to different heat treatments to eliminate internal stress and structure deficiency caused during the melt spinning process. The influences of heat treatments on the SMF thermal properties, molecular orientation, tensile properties, dimensional stability, recovery force relaxation, and thermomechanical cyclic properties were studied. It was found that the heat treatments increased soft segment crystallinity and phase separation while decreased molecular orientation. The low‐temperature heat treatment increased the breaking elongation, shape fixity ratios, and decreased boiling water shrinkage while shape recovery ratios were decreased. High‐temperature treatment increased both the shape recovery ratios, fixity ratios, recovery stress stability and at the same time decreasing the fiber mechanical strength. The results from differential scanning calorimetry, molecular orientation apparatus, and cyclic tensile testing were used to illustrate the mechanism governing the mechanical properties and shape memory effect. To obtain comprehensive outstanding properties, the SMF is expected to be treated at a high temperature because of the hard segment high glass transition temperature. Unfortunately, the heat treatment could not be conducted at a too high temperature because the SMF became too tacky and soft due to the melting of the soft segment phase. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Shape memory crosslinked polyurethanes containing thermoreversible Diels‐Alder couplings

Crosslinked polyurethanes (PUs) containing irreversible (allophanate) and reversible Diels‐Alder chemical bonds were synthesized using various diisocyanates (methylene diphenyl diisocyanate MDI, 1,6‐hexamethylenediisocyanate HDI) and poly(?‐caprolactone) ((PCL) with different molecular weights (M_n = 10 kg/mol, 25 kg/mol, 50 kg/mol) as diol component. The melting/crystallization of PCL and the reversible DA bonds acted as temperature‐activated switches for shape memory performances, while allophanate network provided the permanent crosslinks for these PUs. The reversible DA bonds were obtained by the reaction of diisocyanate‐ended prepolymers with furfurylamine (FA) followed by the addition of bismaleimide (BMI). The permanent crosslinks between the linear chains containing DA bonds were achieved using additional amounts of diisocyanates (MDI or HDI). The above reaction path was supported by infrared spectroscopic results and swelling experiments. Tensile mechanical and shape memory properties in tension of the PUs were determined and discussed as a function of composition and crosslink densities deduced from swelling and dynamic mechanical analysis. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44145.     

Synthesis,characterization, and cytotoxicity of star‐shaped polyester‐based elastomers as controlled release systems for proteins

With the growing number of therapeutic proteins on the market, effective delivery systems are receiving particular attention. In this study, biodegradable elastomers, intended for protein drug delivery and based on methacrylic tripoly(ε‐caprolactone‐co‐d ,l ‐lactide) cyclic ester with different ratios of ?‐caprolactone to d ,l ‐lactide and methacrylic bipoly[?‐caprolactone‐b‐poly(ethylene glycol)‐b‐?‐caprolactone], were synthesized and characterized. The degradation behavior, bovine serum albumin (BSA)‐releasing kinetics, and cytotoxicity of the elastomers in vitro were investigated. The elastomers were degraded by the hydrolysis of the ester bond; this resulted in pH changes, which further affected the degradation rate. The BSA‐releasing behavior was strongly dependent on the diffusion mechanism. In the diffusion‐controlled period, nearly sustained and stable BSA release was achieved. Furthermore, the elastomers displayed good biocompatibility, as demonstrated by a 3‐(4,5‐dimethyl thiazol‐2‐yl)?2,5‐diphenyl tetrazolium bromide assay and inflammation–induction experiments, and are considered promising candidates for the controllable delivery of protein drugs. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43393.     

Heat-responsive shape memory Eucommia ulmoides gum composites reinforced by zinc dimethacrylate

With the renewability, functionality, and biocompatibility of Eucommia ulmoides gum (EUG), shape memory polymers fabricated from EUG present the potential application in biomedical devices and sensors. In this study, heat-responsive shape memory composites were developed and reinforced by zinc dimethacrylate (ZDMA). ZDMA particles were in situ polymerized and uniformly dispersed in the EUG, showing strong interfacial interactions with EUG. The obviously improved tensile strength and storage modulus in the elastic state are attributed to the reinforcement of poly-ZDMA particles. The switching temperature of EUG/ZDMA composites changed from 50 to 29°C through altering the dicumyl peroxide and ZDMA loading. The EUG/ZDMA composites exhibited high shape fixity of 95% and shape recovery of 90%, which favors theirs biomedical applications.     

Synthesis and characterization of poly(carbonate urethane) networks with shape‐memory properties

In this study, a series of shape‐memory polyurethanes were prepared from polycarbonate diol (PCDL) with a molecular weight of 2000, trimethylol propane, and isophorone diisocyanate (IPDI). The properties of crosslinked poly(carbonate urethane) (PCU) networks with various compositions were investigated. The chemical structures and thermal properties were determined with Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry, and thermogravimetric analysis. FTIR analysis indicated that PCU had the structures of IPDI and PCDL and the amido formyl ester in polyurethanes. The gel content of PCU showed that PCU could be effectively formed as crosslinked polyurethane networks. The glass‐transition temperatures of the PCU networks increased slightly with decreasing soft‐segment content in the networks. The values of Young's modulus in the networks at 25°C increased with decreasing soft‐segment content, whereas the tensile stress and breaking elongation decreased significantly. PCU showed shape‐memory effects with a high strain fixity rate. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Effect of the crosslinking density and programming temperature on the shape fixity and shape recovery in epoxy–anhydride shape‐memory polymers

In addition to the fabrication of thermoset epoxy–anhydride shape‐memory polymers (SMPs), a systematic experimental investigation was conducted to characterize the crosslinking density, micromorphology, thermal properties, mechanical properties, and shape‐memory effects in the epoxy SMP system, with a focus on the influence of the crosslinking density and programming temperature on the shape‐fixity and shape‐recovery behaviors of the polymers. On the basis of the crosslinking density information determined by NMR technology, we concluded that the effect of the crosslinking density on the shape‐fixity behaviors was dependent on the programming temperature. The advantage of a nice combination of crosslinking density and programming temperature provided an effective approach to tailor the actual shape recovery within a wide range. The increasing crosslinking density significantly improved the shape‐recovery ratio, which could be further improved through a decrease in the programming, whereas the crosslinking density was more fundamental. This exploration should play an important role in the fabrication and applications of SMP materials. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40559.     

Heats of Combustion and Formation of New Energetic Thermoplastic Elastomers Based on GAP,PolyNIMMO and PolyGLYN

Heats of combustion and formation of various energetic thermoplastic elastomers (ETPE), corresponding to linear copolyurethanes based on an energetic prepolymer and a diisocyanate, were measured by a calorimetric method. These ETPEs were synthesized from three different molecular weights of glycidyl azide polymer, from poly(3‐nitratomethyl‐3‐methyloxetane) and from poly glycidyl nitrate. The prepolymers were also analyzed for comparison with the corresponding ETPEs. A significant difference of the heats of formation was observed between the prepolymers and their ETPEs, while the heats of combustion were similar.     

Influence of Graphene Oxide on Thermally Induced Shape Memory Behavior of PLA/TPU Blends: Correlation with Morphology,Creep Behavior,Crystallinity, and Dynamic Mechanical Properties

In this study, shape memory is thermally induced in a series of graphene oxide (GO) filled poly(lactic acid)/thermoplastic polyurethane (PLA/TPU) blends, prepared via melt mixing process, and their shape recovery and shape fixity are measured, and the results are correlated with morphology, dynamic mechanical properties, crystallinity and creep recovery behavior. Morphological analysis by scanning and transmission electron microscopy reveals that the blends are immiscible, and GO platelets are mainly localized in the TPU phase of the blends, which lead to smaller and more elongated TPU droplets with improved interfacial adhesion being responsible for the improved shape recovery performance compared to the unfilled blend. A systematic enhancement found in storage and Young's modulus, tensile strength, creep resistance and creep recovery, and cold crystallinity as a result of GO inclusion are in agreement with the improved shape recovery, shape fixity and overall shape memory performance of the filled systems. The developed PLA/TPU/GO nanocomposites with highly improved mechanical properties can be utilized as a new class of environmentally friendly shape memory materials for a broad range of applications.     

Shape memory properties of olefin block copolymer (OBC)/poly(ɛ‐caprolactone) (PCL) blends

Conventionally, the chemically crosslinked shape memory polymer (SMP) blends are hard to recycle due to their network structure. Herein, the environmental SMP blends of olefin block copolymer (OBC), a unique thermoplastic elastomer, and poly(?‐caprolactone) (PCL) were physically crosslinked. Dicumyl peroxide was used as the compatibilizer to improve their miscibility, as evidenced by the reduced dispersed domain size of PCL in the OBC matrix and the increased complex viscosity. The peroxide modified OBC/PCL blend conferred enhanced tensile properties, increased dynamic storage modulus, increased crystallization temperature, and higher recovery stress. The shape memory behaviors of OBC/PCL blends predeformed under two different predeformation temperatures (30 and 65 °C) were investigated. The recovery stress showed respective maximum peak values corresponding to their predeformation temperatures. In addition, the modified blends gave the better shape memory performance at 65 °C. Besides the peroxide modification approach, a precycle training process via prestretching the samples and reducing the mechanical hysteresis was implemented to improve shape memory performance further. This is the first work on the OBC‐based SMP blends to enhance shape memory performance by combining the chemical modification using added peroxide compatibilizer and the process modification using a precycle training process. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 45475.     

Hyperbranched‐modified epoxy thermosets: Enhancement of thermomechanical and shape‐memory performances

In this study a complete characterization of the thermomechanical and shape‐memory properties of epoxy shape‐memory polymers modified with hyperbranched polymer and aliphatic diamine was performed. Focusing on the mechanical properties that are highly desirable for shape‐memory polymers, tensile behavior until break was analyzed at different temperatures and microhardness and impact strength were determined at room temperature. As regards shape memory performance, the materials were fully characterized at different programming temperatures to study how this influenced the recovery ratio, fixity ratio, shape‐recovery velocity, and switching temperature. Tensile testing revealed a peak in deformability and in the stored energy density at the onset of the glass transition temperature, demonstrating that this is the best programming temperature for obtaining the best shape‐memory performances. The Young's moduli revealed more rigid structures in formulations with higher hyperbranched polymer content, while microhardness showed higher values with increasing hyperbranched polymer content due to the increased crosslinking density. Impact strength was greatly improved as the aliphatic diamine content increases due to the energy dissipation capability of its flexible structure. As regards the shape‐memory properties, increasing the programming temperature has a minor effect on formulations with a lower hyperbranched polymer content and worsens these properties when the hyperbranched polymer content is increased. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44623.     

Shape‐memory behaviors of electrospun chitosan/poly(ethylene oxide) composite nanofibrous membranes

With aim of constructing a class of functional environmentally friendly materials, we electrospun chitosan (CS) blends with various contents of poly(ethylene oxide) (PEO) into a series of composite nanofibrous membranes exhibiting shape‐memory behaviors. In the present composite system, CS and PEO served as hard and soft domains, respectively. The CS, presenting no thermal transition, and the PEO, with apparent melting–crystallization, were demonstrated by differential scanning calorimetry testing. Characterizations also revealed that the morphologies of the CS/PEO membranes were controlled by the mass ratios of CS/PEO. The composite fibrous membranes showed great mechanical performances and thermal stabilities as well. Moreover, CS/PEO possessed excellent shape‐memory behaviors. Such fibrous membranes could complete their shape‐recovery processes within 20 s at the temperature of 20°C above the melting transition temperature (T_m). Both the shape fixity and shape‐recovery ratios were higher than 90%, even after five cycles. The CS/PEO fibrous membranes present significant potential applications in the field of biotechnology and tissue engineering, such as in scaffolds and smart tubes. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42532.     

Biodegradable and photocurable multiblock copolymers with shape‐memory properties from poly(ε‐caprolactone) diol,poly(ethylene glycol), and 5‐cinnamoyloxyisophthalic acid

Biodegradable and photocurable multiblock copolymers of various compositions were synthesized by the high‐temperature solution polycondensation of poly(ε‐caprolactone) (PCL) diols of molecular weight (M_n) = 3000 and poly(ethylene glycol)s (PEG) of M_n = 3000 with a dichloride of 5‐cinnamoyloxyisophthalic acid (ICA) as a chain extender, followed by irradiation by a 400 W high‐pressure mercury lamp (λ > 280 nm) to form a network structure. The gel contents increased with photocuring time, reaching a level of over 90% after 10 min for all copolymers without a photoinitiator. The thermal and mechanical properties of the photocured copolymers were examined by DSC and tensile tests. In cyclic thermomechanical tensile tests, the photocured ICA/PCL/PEG copolymer films showed good shape‐memory properties at 37–60°C, with both shape fixity ratio and shape recovery ratio over 90% at a maximum tensile strain of 100–300%. The water absorption of these copolymers and their rate of degradation in a phosphate buffer solution (pH 7.0) at 37°C increased significantly with increasing PEG content. The novel photocured ICA/PCL/PEG multiblock copolymers are potentially useful in biomedical applications. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011