Modelling the biological variance of the yellow aspect of Granny Smith apple colour

BACKGROUND: The yellow aspect of colour is usually not considered for produce with a green‐to‐red or a green‐to‐yellow transition upon ripening. The magnitude of change is simply too small and, additionally, masked by a large variation. The colour of ‘Granny Smith’ apples, harvested from three orchards at two stages of maturity, was measured individually using the CIE L*a*b* system during storage in a regular atmosphere at three temperatures: 1, 4 and 10 °C. A model was developed based on a simplified mechanism, consisting of two consecutive reactions, to describe the development of the apple colour expressed as b* and L* values during storage. RESULTS: Monitoring individual apples made it possible to include and describe the biological variance of colour in batches of apples and to extract information on chilling injury, as a process active at 1 °C. All variations could be attributed to a single source related to the amount of yellowing compounds at the moment of harvest, indicating differences in state of maturity between individual apples. The obtained explained part (R²_adj), using nonlinear mixed effects regression analysis was well over 90% for all data combined over more than 3000 observations. CONCLUSION: Orchard location had a slight effect on the mean initial colour value, indicating differences in development stage, most probably due to differences in assessing the harvest date. The magnitude of the variation in these colour values was, however, the same for all three orchards. The behaviour of the green colour aspect (a* value) has been reported separately, as this represents the major change in perceived colour. The changes in b* and L* values are rather small, while the biological variation between the individual fruit is at least of the same magnitude. The model presented here is, as far as known, the first model on b* and L* values for green‐coloured products. Analysing b* and L* data using this model provides additional information with respect to the stage of maturity at harvest in a batch or for an orchard of Granny Smith apples. All the variation in the yellow colour aspects could be attributed exclusively to the initial level of yellow compounds. Copyright © 2010 Society of Chemical Industry     

Influence of pH on colour and iron content of peptide fractions obtained from bovine Hb concentrate hydrolysates

The effect of pH on colour and iron content (Fe) of peptide fractions obtained from bovine haemoglobin concentrate (BHC) hydrolysates was studied. Four hydrolysates were obtained using three enzymes: Protex‐6‐L (P), Fungal–Protease–Concetrate (FC) and Flavourzyme (F). BHC and its hydrolysates (P, FC, P + F, FC + F) were fractioned at pH 4.5, 7.0 and 9.5. Solubility and Fe from different fractions were measured. Correlations between CIELAB colour parameters and Fe from different fractions were analysed. The colour from different fractions varied from red to yellow (a* and b* positives). Lightness values (L*) ranged from twenty‐four to seventy. FC4.5 and FC + F4.5 fractions were the clearest and yellow (higher L*, b*, h), while BHC9.5 and P + F9.5 fractions had the lowest values of L*, b* and h. There was an inverse linear relationship between b* and L* parameters and Fe from fractions. This relationship could be associated with the pH of extraction. As pH increases Fe significantly increases and lower b* and L* values were obtained.     

The effect of pumpkin fibre on quality and storage stability of reduced‐fat set‐type yogurt

In this study, the effect of pumpkin fibre (PF) on physicochemical, microbiological, rheological and microstructural characteristics of reduced‐fat yogurt samples was investigated during storage. PF was added at three different concentrations (0.5%, 1.0% and 1.5%) to standardised (1.55% fat ratio) cow's milk. Plain yogurt (PF‐free) was used for comparison. The addition of PF significantly affected total solid content, synaeresis, water‐holding capacity, apparent viscosity and colour parameters (L*, a*, b*) of yogurt samples for all sampling time. The addition of PF caused a reduction in L* values (from 94.89 to 88.67), but caused an increase in a* (from ?2.10 to +4.22) and b* (from 10.79 to 25.88) values. Yogurts with PF exhibited lower synaeresis and more viscous structure than PF‐free sample during storage. SEM images showed that distinctive microstructure profile was present between samples with or without PF. More filamentous structures and denser network were observed in the SEM images and these increased with increasing level of PF. Yogurt containing 1.0% PF showed a higher storage (G′) (3687.87 at 21 day) and loss (G″) (543.10 at 21 day) moduli in comparison with other samples. In conclusion, the results revealed that PF improved the physical quality and contributed textural properties of half‐fat yogurt.     

Colour of rapeseed (Brassica napus) surface and contamination by fungi during storage of dry and wet seeds

The aim of this study was to determine the effect of seed size and cultivation location on the diversity of colour of rapeseed surface and the level of fungi infection of sound, dry rapeseed and the correlation between colour attributes and fungal growth during storage of wet seeds. It has been reported that the colour, mouldiness degree and genera differentiation on the surface of sound seeds depend on both the seed size and the seed cultivation location. The storage of wet rapeseed led to a colour shift to a green‐yellowish hue with higher lightness and to about a 1000‐fold increase in colony‐forming units (CFUs) per seed mass. During the first 15 days, fungal growth was undetectable both by human eye inspection and by digital image analysis (DIA). The onset of fungal growth was associated with slight increase in G (of RGB) and a* and b* (of CIE L*a*b*) colour attributes.     

Characterisation and stability of quality indices on storage of pumpkin (Cucurbita moschata and Cucurbita maxima) purees

Purees of Cucurbita moschata‘Menina Brasileira’ and of Cucurbita maxima‘Exposição’ pumpkins were produced. A commercial sterilisation test confirmed the effectiveness of the thermal treatment applied in the production. The stability was monitored during storage in ambient conditions. No significant alterations in pH, titratable acidity or soluble solids were noted. Both types of puree have a good concentration of carotenoids, although a slight decrease was detected in the ‘Exposição’ pumpkin puree after 15 days of storage. In relation to the colour of the purees, there were no significant alterations in a*, b* or ΔE during storage. Decreases in L* and WI were detected after 30–60 days of storage, thus suggesting a browning in an initial period. However, the scores given by the sensory assessors remained above 7 in a 9‐point scale, thus showing no significant alterations during storage. The results showed the stability of the pumpkin purees during the 180 days of storage under the proposed conditions.     

Effect of pre-slaughter physiological conditions on the oxidative stability of colour and lipid during chill storage of pork

The physiological condition of the live animal was found to significantly affect colour, lipid oxidation and water holding capacity of chill stored pork chops (M. Longissimus dorsi) in a study, where various pre-slaughter conditions were achieved by the following four treatments: (A) control; (B) subjected to treadmill exercise immediately prior to stunning; (C) given epinephrine injection 15 h prior to slaughter; and (D) given epinephrine injection 15 h before slaughter and further subjected to treadmill exercise immediately before stunning. The treatments resulted in variations in energy metabolites (glycogen, lactate, creatine phosphate, ATP) and ultimate pH (pH_u), with the lowest pH_u in chops from treatments A and B, and in significantly different tristimulus colour L^*-, a^*- and b^*-parameters, although the effect of treatment on colour was not consistent during the chill storage period of 6 days. Overall, chops from treatments A and B had significantly higher L^*- and b^*-values (were paler and less blue) than chops from C and D during storage under conditions typical for retail trade. The initial a^*-values were higher (redder) in chops from treatments A and B, but the colour, as judged by the a^*-values, was less stable in meat from these treatments compared with treatments C and D. Lipid oxidation, evaluated by thiobarbituric acid reactive substances (TBARS) in the fresh meat, and drip loss, measured after 6 days of storage, were both significantly higher in chops from treatments A and B compared to chops obtained from treatments C and D. Statistical analysis relating the pH and the level of various energy metabolites post-mortem in the individual animals to the measured quality parameters, revealed that pH_u was the most important factor affecting product quality. In conclusion, over all product quality depends on obtaining a pH_u in the narrow range where both meat quality parameters such as colour, lipid oxidation and drip loss as well as microbiological aspects have to be considered.     

Effects of dietary humate supplementation to broilers on performance,slaughter, carcass and meat colour

BACKGROUND: This experiment was designed to examine the effect of dietary humate supplementation primarily on pH and colour parameters of carcasses, breast fillets and drumsticks and, secondarily on performance and carcass characteristics in broilers. RESULTS: A total of 240 male broiler chicks (Ross‐308) were randomly allocated to four dietary treatments varying in supplemental humate level (0, 0.1, 0.2 and 0.3% for H₀, H₁, H₂ and H₃). Dietary humate supplementation did not affect performance traits and slaughter, hot carcass weights and yields. Carcass‐related variables (pH, L*, a*, b*, H* and C*) were responsive to the dietary treatments. The L*, a*, b*, and C* values for drumstick muscles were higher than those for breast muscles. Except for the L* value, meat colour parameters changed due to packaging. The a* value was higher and b* value was lower for vacuum packaged breast and drumsticks than for those aerobic packaged. Storage period affected colour parameters; while L*, b*, H* and C* values were higher for drumstick skin than for drumstick meat; the a* value was greater in drumstick meat than in skin. CONCLUSION: pH and colour parameters of carcasses, breast fillets and drumsticks of broilers were improved by dietary humate supplementation. However, responses of broiler performance and slaughter and carcass characteristics were minimal. Copyright © 2008 Society of Chemical Industry     

The effect of adding herbs to labneh on physicochemical and organoleptic quality during storage

The aim of this study was to investigate the influence of different herbs on physicochemical and organoleptic quality of labneh during storage. Analyses were carried out at 10‐day intervals in a storage period of 30 days. There were to significant differences in dry matter, fat and ash contents of the labneh samples. The pH and titratable acidity values were influenced by herbs and storage periods. Adding herb to labneh altered the colour: L* values in all samples decreased, whereas a* and b* values were affected differently from herbs added. Calcium content of the labneh decreased with the addition of herbs, but phosphorus, iron, copper and zinc contents increased. The sensorial scores of the labneh samples were influenced by the variety of herb added and the storage times. Addition of dill and parsley to labneh resulted in the greatest sensory scores.     

The effect of direct acidification on the microbiological,physicochemical and sensory properties of probiotic Minas Frescal cheese

Minas Frescal cheeses produced with the addition of the probiotic culture Bifidobacterium Bb‐12 and without (C1) or with (C2) lactic acid were evaluated in relation to the microbiological, physicochemical and sensory properties. After 28 days of storage, the cheeses without lactic acid showed lower moisture and pH, in addition to higher acidity and syneresis. This behaviour influenced the texture profile of the cheeses, making them harder and chewier. The colour attributes L* and b* diminished during the storage. The majority of the consumers classified the cheeses as having good acceptability and they would buy this type of functional food.     

The isolation and properties of a concentrated red‐purple betacyanin food colourant from Opuntia stricta fruits

A red‐purple food colourant from Opuntia stricta fruits was obtained and studied. Four steps were involved in its isolation: washing, extraction, centrifugation and concentration. Ethanol:water 60:40 (v/v) was selected as the optimum extraction solvent to reduce the viscosity caused by the presence of mucilage and pectins. The resulting 40‐fold concentrated extract had a high colour strength (3.9, OD 535 nm, 1% v/v sol), a high betanin concentration (4.7 g L⁻¹) and low viscosity (59.0 cP). It also showed high stability (t_1/2 = 236.6 d, 4 °C) mainly due to its low pH (3.4) and low water content (571 g kg⁻¹). These characteristics were in the same range as shown by three commercially available liquid concentrated colourants studied (red beet, red carrot and red grape skin). The colour parameters of this concentrated extract of Opuntia stricta were compared with those of commercial red colourants (red beet, red carrot, red grape skin, cochineal, elderberry, hibiscus and red cabbage). CIELAB values of Opuntia stricta (1.5 mL L⁻¹) were L* = 69.8, a* = 59.7 and b* = −23.5. Opuntia stricta presented a vivid red‐purple colour which was distinguishable from the colours shown by the other natural red food colourants. Copyright © 2005 Society of Chemical Industry     

Effects of different pre-freezing blanching procedures on the physicochemical properties of Brassica rapa leaves (Turnip Greens, Grelos)

For optimal freeze storage, green vegetables should first be blanched. The present study compared four different procedures for the blanching of grelos (leaves of Brassica rapa L.): steaming for 2 min, immersion in boiling water for 2 min, immersion in boiling water containing 1% citric acid for 1 min, and immersion in boiling water containing 5% citric acid for 1 min. After blanching, the grelos were stored for up to 120 days at ?18 °C, with sampling at two‐weekly intervals for analysis of physicochemical properties (ash weight, vitamin C content, pH, acid value, moisture content and CIE_L*a*b* colour variables). In almost all respects steam blanching gave the best results: notably, vitamin C losses were markedly lower, while moisture content and colour remained closer to those of the fresh product.     

Quality changes during storage of sous vide cooked green beans (Phaseolus vulgaris)

 The acceptability and quality of sous vide cooked green beans (Phaseolus vulgaris) were investigated during chilled storage. A suitable heating procedure was established whereby 2.0-kg packages were heat processed at 90°C for 25 min, corresponding to an average pasteurization value, PV_70,10, of 14 min. During storage for up to 25 days at 3°C drip loss, pH, colour (Minolta L ^* a ^* b ^*), texture (Instron) and microbiological stability were examined and sensory characteristics evaluated by a trained sensory panel. No marked changes in texture, drip loss, pH or microbiological counts were observed but a change of colour from green to olive green was observed by both objective and sensory analyses. This detrimental change in colour, which had begun during the first week, was the limiting factor for shelf-life during storage. Subsequent reheating, however, resulted in further colour changes which partially obscured the initial differences observed during the storage period. Storage for more than 1 week resulted in undesirable quality changes in the odour and flavour of the green beans. Therefore, a maximum shelf-life of 8 days at 3°C was recommended. Inoculation trials showed that psychrotrophic Bacillus cereus were able to germinate and grow to levels of 10⁷ g^–1 in the packages at abuse temperatures (7°C and 17°C), whereafter numbers declined. Received: 21 April 1997     

Effect of location in the canopy on the colour development of three apple cultivars during growth

BACKGROUND: Homogeneity in appearance is one of the quality aspects asked for in the supply chain. Decreasing the biological variation in batches of harvested apples (cultivars Braeburn, Fuji and Gala) becomes increasingly important. Skin colour is one of the aspects that determine both optimal harvest and stage of development. Skin colour is affected by location in the canopy. The rules of development of biological variation are now established and will be used on skin colour data. RESULTS: The Minolta colour aspects a*, b* and L* measured before commercial harvest change in a sigmoidal fashion and can be analysed including the biological variation, with a logistic model in indexed nonlinear regression, obtaining explained parts of above 90%. The mechanism of colour change is not affected by state of development or location in the canopy. The location in the canopy affects the intensity of both red and green colouring compounds. The variation in colouration is not affected by the location in the canopy. CONCLUSION: The red‐coloured apple cultivar (Gala) depends more on the location in the canopy than the less‐coloured cultivars (Fuji and Braeburn). The colour development in Fuji apples is considerably slower, with a much larger variation in stage of development. The location in the canopy affects all aspects of biological variation (biological shift factor and asymptotic starting level of colouration) for all three colour aspects L*, a* and b*, but only the mean value, not the standard deviation. The biological shift factors per colour aspects are linearly related. Once induced, variation remains constant during development. Copyright © 2012 Society of Chemical Industry     

Influence of particle characteristics and E/Z‐isomer ratio on the colour of concentrated β‐carotene dispersions

The influence of particle concentrations (0.02–0.40%), mean particle sizes (0.45–1.5 μm) and all‐E‐isomer ratios (95–30%) on the CIELAB colour coordinates (L*, a*, b*) of concentrated β‐carotene dispersions was investigated. Particle concentration between 0.06% and 0.40% had a slight impact on the colour parameters. However, with decreasing the mean particle size from 1.50 to 0.45 μm, there were increases in ΔL* = 8.0, in Δa* = 2.26 and in Δb* = 13.1. And with decreasing the all‐E‐isomers ratio from 95% to 30%, there were increases in ΔL* = 8.66, in Δb* = 17.51 but decrease in Δa* = 7.42. The experimental results were explained in terms of the scattering and absorption of light by dispersions. These findings have important implications for food industry as they offer a means to control and optimise the colour of food dispersions.     

Development of a colour scale for colour evaluation of beef carcasses at 60 min post mortem

The pectoralis profundus muscles of 200 selected beef carcasses were measured to develop a standard colour scale for evaluating beef carcasses at the time of classification (approximately 60 min post mortem). Five lightness (L*) values were chosen ranging from 22 to 42 with intervals of five L* units. Corresponding a* and b* values were calculated. Based on regressions between the actual reflection spectra and the L*, a* and b* values, spectra of the five chosen colours for the colour scale were predicted. The L*, a* and b* values accurately predicted the reflection spectra. A paint company imitated the five reflection spectra. Spectra could not be matched exactly, without metamerism occuring. Therefore, the colour scale should be used with specific light sources. The scale is recommended in The Netherlands to classify the colour of beef, as a supplement of SEUROP‐system for conformation and fatness. © 1999 Society of Chemical Industry     

Effects of oxygen and antioxidants on the lipid oxidation and yellow discolouration of film from red tilapia mince

BACKGROUND: Generally, biodegradable films from fish muscle protein become yellow after preparation. This discolouration is more likely associated with lipid oxidation and can be prevented by minimising the oxidation in the films. Thus, the effects of oxygen and antioxidants on lipid oxidation and yellow discolouration of film from red tilapia mince during storage were investigated. RESULTS: Both films prepared at pH 3 and 11, and kept under atmosphere containing 100% N₂ had the lowest TBARS value with the concomitant lowest b* and ΔE* values during storage (P < 0.05), when compared with other films kept in air and a 100% O₂ atmosphere. Films prepared at pH 3 and incorporated with antioxidants (Trolox and catechin) at all levels (100, 200 and 400 mg L^?1 film‐forming solution) had the lowest TBARS value, b* and ΔE* values during storage, indicating the retardation of lipid oxidation and yellow discolouration in films. Nevertheless, films prepared at pH 11 had no difference in TBARS values, in comparison with control film, regardless of antioxidant incorporation. Coincidentally, increases in b* and ΔE* values were observed in those films. CONCLUSIONS: Lipid oxidation was the main factor inducing yellow discolouration of film exposed to oxygen and the incorporation of antioxidants in film prepared at acidic pH was able to prevent yellow discolouration of resulting film. Copyright © 2012 Society of Chemical Industry     

Changes in selected quality characteristics of minimally processed carambola (Averrhoa carambola L.) when treated with ascorbic acid

‘B 10’ carambola of ripening stage (RS) 3 and 4 were minimally processed (MP) and then dipped in 0, 15 and 30 mg L^?1 ascorbic acid (AA). The 1‐cm‐thick slices were then dried, packed into cling‐wrapped‐foam tray and stored at 7 °C for 0, 3 and 5 days. Skin colour (L*, C* and h°), flesh firmness, soluble solids concentration, vitamin C content, titratable acidity, pH, degree of browning, polyphenoloxidase (PPO) activity and sensory attributes of MP carambola treated with AA were determined. AA treatment had significant effect in decreasing cut surface browning degree but no significant effect on all the selected quality characteristics of the MP carambola. In the sensory evaluation, flesh colour, sweetness, flavour and overall taste were significantly affected by AA treatment especially at 15 mg L^?1. The RS of fruit significantly affected skin colour (C* and h°), pH and sensory attributes of colour and flavour of the MP carambola. As storage day (SD) progressed, skin colour (C* and h°), flesh firmness and vitamin C content, cut surface browning, PPO activity and all the sensory attributes of MP carambola decreased significantly. Flesh firmness of the MP carambola was affected by the interaction between AA × SD. Sensory attributes of MP carambola were affected significantly by AA × RS. All the sensory attributes of MP carambola positively correlated to each other but negatively correlated with browning degree. PPO activity positively correlated with browning degree. Copyright © 2007 Society of Chemical Industry     

Effect of Lactococcus lactis Immobilized Within Pineapple and Yam Bean Segments, and Jerusalem Artichoke Powder on Its Viability and Quality of Yogurt

Lactococcus lactis cells were immobilized within pineapple segments, yam bean segments, and Jerusalem artichoke (JA) powder, and immobilized cells were used separately as adjuncts in producing probiotic yogurt. In parallel, yogurt with free L. lactis cells and yogurt only from starter cultures were also produced. The resulting yogurt samples were stored at 4 °C. Immobilization of cells increased the viability of L. lactis cells compared to free cells during storage of yogurt within pineapple segments, JA powder, yam bean segments, and free cells (43.77 %, 63.62 %, 80.11 %, and 87.14 %, respectively). The pH values of all yogurt samples decreased during storage; however, the pH values of yogurt supplemented with immobilized cells were higher than samples with free L. lactis cells. The increase in lactic acid content during storage was not different among the yogurt samples with added immobilized cells within segments of pineapple, yam beans, and free cells. However, the lactic acid content increase was greater with samples containing immobilized cells within JA powder. The immobilized cells within pineapple segments resulted in a decrease in b* color values (indicating yellowness) and an increase in a* color values (indicating greenness) whereas immobilized cells within yam bean segments resulted in a decrease in b* color values. Immobilized cells within JA powder resulted in a decrease in L* color values (indicating lightness) and an decrease in a* color values when compared to free cells. During storage, the concentration of γ-aminobutyric acid had a tendency to increase, which was not statistically significant. The sensory test revealed that the overall acceptance scores of yogurt with immobilized cells added were quite similar to those of the samples with free cells and controls throughout the storage period of 28 days.     

Comparison of Minolta colorimeter and machine vision system in measuring colour of irradiated Atlantic salmon

BACKGROUND: Minolta and machine vision are two different instrumental techniques used for measuring the colour of muscle food products. Between these two techniques, machine vision has many advantages, such as its ability to determine L*, a*, b* values for each pixel of a sample's image and to analyse the entire surface of a food regardless of surface uniformity and colour variation. The objective of this study was to measure the colour of irradiated Atlantic salmon fillets using a hand‐held Minolta colorimeter and a machine vision system and to compare their performance. RESULTS: The L*, a*, b* values of Atlantic salmon fillets subjected to different electron beam doses (0, 1, 1.5, 2 and 3 kGy) were measured using a Minolta CR‐200 Chroma Meter and a machine vision system. For both Minolta and machine vision the L* value increased and the a* and b* values decreased with increasing irradiation dose. However, the machine vision system showed significantly higher readings for L*, a*, b* values than the Minolta colorimeter. Because of this difference, colours that were actually measured by the two instruments were illustrated for visual comparison. Minolta readings resulted in a purplish colour based on average L*, a*, b* values, while machine vision readings resulted in an orange colour, which was expected for Atlantic salmon fillets. CONCLUSION: The Minolta colorimeter and the machine vision system were very close in reading the standard red plate with known L*, a*, b* values. Hence some caution is recommended in reporting colour values measured by Minolta, even when the ‘reference’ tiles are measured correctly. The reason for this discrepancy in colour readings for salmon is not known and needs further investigation. Copyright © 2009 Society of Chemical Industry