Polymerization of linear aliphatic diamine-based benzoxazine resins under inert and oxidative environments

A series of linear aliphatic diamine-based benzoxazine monomers have been studied. Reaction times and purification procedures have been optimized for each individual diamine. The structure of these diamine-based benzoxazine monomers has been characterized by ¹H and ¹³C NMR, and infrared spectroscopy. The rate of polymerization has been studied by Fourier transform infrared spectroscopy as a function of the chain length of the aliphatic amines. The glass transition temperatures (T_g) of the polybenzoxazines from these monomers are also studied. The short chain amine polybenzoxazine exhibits the T_g of around 170 °C. The influence of the polymerization environment for these linear aliphatic diamine-based series of benzoxazine monomers has been studied under air and inert atmosphere. Differential scanning calorimetry is used to determine the melting points of these benzoxazines and the temperature of the peak polymerization exotherm. An anomalous polymerization behavior of ethylene diamine-based polybenzoxazine is also reported.     

Synthesis of branched benzoxazine monomers with high molecular mass,wide processing window,and properties of corresponding polybenzoxazines

Four cyclotriphosphazene‐based benzoxazine monomers (I, II, III, and IV) with relatively high molecular weight were synthesized by a nucleophilic substitution reaction, and their chemical structures were confirmed by ¹H‐NMR and ³¹P‐NMR. A new term, oxazine value (OV, similar to epoxy value), was first proposed to explain the structure–property relationship of the cured polymers. The polymerization behaviors of the four monomers were studied by differential scanning calorimetry and Fourier transform infrared spectroscopy. The maximum exothermic peaks of the four monomers are in the range 244–248 °C. All monomers possess a wide processing window despite their high molecular weight. The thermal stability, glass‐transition temperature (T_g), and mechanical properties of each cured polymer were studied by thermogravimetric analysis and dynamic mechanical thermal analysis. The char yield at 850 °C, T_g, and storage moduli of PIV (polybenzoxazine obtained from monomer IV) are 60.0%, 218 °C, and 9.0 GPa, respectively. The surface property and humidity absorption character of the cured polybenzoxazines were also studied. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44453.     

Dynamic mechanical and shape memory properties of polybenzoxazines based on aminopropyl‐terminated siloxanes

Four siloxane‐containing benzoxazine monomers and telechelic benzoxazine oligomers were synthesized from 1,3‐bis(3‐aminopropyl)‐1,1,3,3‐tetramethyldisiloxane, α,ω‐bis(3‐aminopropyl)polydimethylsiloxane, phenol, o‐allylphenol, and formaldehyde. The length of the siloxane segment affects the polymerization reaction of the benzoxazine monomers and telechelic benzoxazine oligomers. The dynamic mechanical properties of the corresponding polybenzoxazines depend primarily on the structure of phenol and the length of the siloxane segment. The polybenzoxazines exhibit one‐way dual‐shape memory behavior in response to changes in temperature. The thermally induced shape memory effects of the polybenzoxazines were characterized by bending and tensile stress–strain tests with a temperature program based on their glass transition temperatures. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44121.     

Synthesis,thermal polymerization,and properties of benzoxazine resins containing fluorenyl moiety

Three difunctional fluorene‐based benzoxazine compounds were synthesized via Mannich condensation and were characterized by proton nuclear magnetic resonance spectroscopy (¹H NMR), Fourier transform infrared spectroscopy (FTIR), and elementary analysis (EA). The polymerization of benzoxazine monomers were investigated with differential scanning calorimeter (DSC) method. Thermal properties of the polybenzoxazines were studied by thermogravimetric analysis (TGA) and DSC. Water absorption of the polybenzoxazines was tested. Contact angle measurement was employed to characterize the surface property of materials. The glass transition temperatures (T_gs) and thermal stability were improved significantly in comparison with bisphenol‐A‐based analogue because of the incorporation of rigid fluorenyl group. The fluorenyl‐based polybenzoxazines showed hydrophobic characteristics, which was ascribed to the low polarity of fluorenyl and pi–pi stacking interaction of fluorenyl on the surface. POLYM. ENG. SCI., 2012. © 2012 Society of Plastics Engineers     

Dynamic mechanical analysis on highly thermally stable polybenzoxazines with an acetylene functional group

Dynamic mechanical analysis is performed on polybenzoxazines from acetylene-terminated benzoxazine monomers, and glass transition temperatures of these polybenzoxazines are found in the range of 329–368°C. It has been identified that the high glass transition temperature and high thermal stability are due to polymerization of the acetylene terminal group, in addition to oxazine ring polymerization through a comparison study with analogous polybenzoxazines that are obtained from monomers without an acetylene functional group. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 857–862, 1999     

Benzoxazine monomers based on aromatic diamines and investigation of their polymerization by rheological and thermal methods

In the present article with the aim to find new polybenzoxazines with improved thermal properties, new benzoxazine monomers based on phenol and the following aromatic diamines were synthesized: 3,4′-oxydianiline (P-3,4′oda); o-tolidine (P-ot); m-tolidine (P-mt) and 4,4′-(1,3-phenylenedioxy)dianiline (P-tper) and their comparison with the previously known benzoxazines based on 4,4′-diaminodiphenylmethane (P-ddm); 4,4′-oxydianiline (P-4,4′-oda) and 2,2-Bis[4-(4-aminophenoxy)phenyl]propane (P-bapp). The dependence of the thermal and rheological characteristics on the structure of benzoxazine monomers based on various diamines was estimated and possible methods for their processing were identified. All the polybenzoxazines obtained in this work have high char yield and reduced flammability. It was found that the structure of the diamine can have a fundamental effect on both the rheological properties and heat resistance of polybenzoxazines. The benzoxazine monomers P-ddm, P-tper and P-4,4′oda retain viscosity up to 1 Pa s. at 110°C for 2 h, the P-tper monomer with a resorcinol bridge has about five times lower viscosity compared to the P-bapp monomer with a bisphenol A bridge. Polybenzoxazines based on the monomers P-ddm, P-mt, P-bapp and P-tper show excellent thermal stability with a temperature of 10% weight loss above 400°C. In particular, T_g of P-3,4′oda and P-mt monomers is relatively high (202 and 239°C, respectively), while P-ot's is unusually low (115°C), which may be caused by the specific effect of the substituents in the aromatic ring of the amine and their position.     

Remarkable improvement of thermal stability of main‐chain benzoxazine oligomer by incorporating o‐norbornene as terminal functionality

A new main‐chain benzoxazine oligomer with o‐norbornene functionality as end groups has been designed and synthesized. As compared to traditional main‐chain type benzoxazine polymers, this benzoxazine oligomer with o‐norbornene terminal functionality can undergo further crosslinking polymerization after general ring‐opening polymerization of oxazine rings. Another main‐chain benzoxazine oligomer has also been designed based on the reaction of bisphenol‐A, 4,4′‐diaminodiphenylmethane, paraformaldehyde, and phenol for comparison. The structure of the synthesized oligomers is confirmed by ¹H nuclear magnetic resonance spectroscopy and Fourier transform infrared spectroscopy (FTIR). The molecular weight has been determined by using gel permeation chromatography (GPC). The benzoxazine oligomer containing o‐norbornene functionality can polymerize with multiple polymerization mechanisms rather than the single mechanism common to traditional 1,3‐benzoxazine resins. The polymerization mechanisms are monitored by in situ FTIR and differential scanning calorimetry (DSC). Moreover, the thermoset derived from the benzoxazine oligomer containing o‐norbornene functionality exhibits high thermal stability with the transition temperature of 360 °C and a high T_d5 of 404 °C. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45408.     

Synthesis and characterization of new polybenzoxazines from renewable resources for bio‐composite applications

Renewable natural resources such as eugenol, furfurylamine, stearylamine, and jute fiber were used to prepare polybenzoxazine composites. The purity of eugenol which is extracted from clove was confirmed by gas chromatography. FTIR, ¹H, and ¹³C NMR spectroscopic analysis were used to determine the structure of eugenol and the benzoxazine monomers namely 6‐allyl‐3‐furfuryl‐8‐methoxy‐3,4‐dihydro‐2H‐1,3‐benzoxazine (EF‐Bz) and 6‐allyl‐3‐octadecyl‐8‐methoxy‐3,4 dihydro‐2H‐1,3‐benzoxazine (ES‐Bz) synthesized from it. The curing analysis from differential scanning calorimetric analysis shows that the onset of curing is shifted to lower temperature (161°C) for EF‐Bz, when compared with ES‐Bz (174°C). The thermal stability analyzed from thermogravimetric analysis shows that the polybenzoxazine EF‐Pbz has higher thermal stability (T_5% = 361°C) with that of ES‐Pbz (T_5% = 313°C). The storage modulus, tensile, and flexural strength of the EF‐Bz/Jute fiber composite show high value when compared with ES‐Bz/Jute fiber composites. POLYM. COMPOS., 37:1821–1829, 2016. © 2014 Society of Plastics Engineers     

Synthesis,polymerization and thermal properties of bio-based benzoxazine resins containing imide or amide functionality

Two novel bio-based benzoxazine monomers containing imide or amide group (HPIDD-fa and HPBA-fa) were synthesized from raw materials of benzoyl chloride/phthalic anhydride, tyramine, furfurylamine and paraformaldehyde via a two-step reaction. Fourier transform infrared spectroscopy (FT-IR), proton and carbon nuclear magnetic resonance (NMR) spectroscopies were performed to characterize the structures of the benzoxazine monomers. The curing behavior was investigated by using differential scanning calorimetry (DSC) and in situ FT-IR, and the DSC results indicate that the peak curing temperatures of HPIDD-fa and HPBA-fa are centered at 248.5 and 230.1°C, respectively. In addition, thermogravimetric analysis (TGA) suggests that the newly developed bio-based benzoxazine-derived polybenzoxazines present excellent thermal stability with T_d10 (temperature at 10% weight loss) of 385 and 368°C for poly(HPIDD-fa) and poly(HPBA-fa), respectively. The current investigation suggests that our newly obtained bio-based thermosetting resins are promising materials for high-tech applications.     

Preparation of polysiloxane oligomers bearing benzoxazine side groups and tunable properties of their thermosets

A new pathway for the preparation of polysiloxane oligomers bearing benzoxazine side groups were reported via the hydrolysis and co‐polycondensation of benzoxazinyl siloxane (SBZ) with dimethyldiethoxysilane (DEDMS). The structures of SBZ and oligomers were characterized by Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (NMR) spectroscopy. The average molecular weights of the obtained oligomers were estimated from size exclusion chromatography and ¹H‐NMR to be in the range of 2000–4000. The oligomers gave transparent films by casting in THF solution. The films were further thermally treated to produce crosslinked films via the ring opening polymerization of benzoxazine side group. The effects of siloxane content on polymerization behavior, glass transition temperature, and mechanical properties of the polybenzoxazine thermosets were investigated. Tensile test of the films revealed that the elongation at break increased with increasing siloxane content. The elongation at break of poly(I‐50) was up to 12.1%. Dynamic mechanical analysis of the thermosets showed that the T_gs were in the range of 119–165°C. Thermogravimetic analysis also revealed a better thermal stability as evidenced by the 5% weight loss temperatures in the range of 363–390°C. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40960.     

Thermal study on the copolymers of phthalonitrile and phenylnitrile‐functional benzoxazines

Ortho‐, meta‐, and para‐phenylnitrile–functional benzoxazines are polymerized at different compositions with phthalonitrile‐functional monomers providing copolybenzoxazines of high thermal stability and easy processability. The most positive effect on these properties is obtained on copolymerizing phthalonitrile‐ and ortho‐phenylnitrile–functional benzoxazines. Thermal decomposition of these polybenzoxazines is studied by thermogravimetry (TGA). It is demonstrated that only 30 mol % of phthalonitrile‐functional benzoxazine added to the ortho‐phenylnitrile–substituted monomer improves char yield significantly from 59 to 77 wt %, which is the value of neat phthalonitrile‐based polybenzoxazine. Glass transition temperature (T_g) also dramatically increases from 180°C for neat ortho‐phenylnitrile polymer to 294°C for the copolymer with 30 mol % of phthalonitrile‐functional monomer. Additionally, the high melt viscosity of phthalonitrile‐functional benzoxazines is dramatically decreased upon blending with phenylnitrile‐functional monomer. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 2937–2949, 1999     

Synthesis and curing behavior of a novel benzoxazine‐based bisphthalonitrile monomer

A novel bisphthalonitrile containing benzoxazine units (BZ‐BPH) was synthesized via a solventless method from 4,4′‐dihydroxybiphenyl, paraformaldehyde, and 4‐aminophenoxylphthalonitrile. The chemical structure of BZ‐BPH was confirmed by ¹H‐NMR and ¹³C‐NMR analyses. The curing behavior was investigated with DSC, FTIR, TGA, and rheology techniques. The monomer manifested a two‐stage thermal polymerization pattern. The first stage was attributed to the ring‐opening polymerization of benzoxazine moiety, and the second to the polymerization of phthalonitriles. Study about the effect of the catalysts including 4,4′‐diaminodiphenylsulfone and FeCl₃ on the polymerization of BZ‐BPH was performed, and the result indicated that the addition of these agents could increase the curing rate and lower the curing temperature. Additionally, the cured product showed excellent thermal and thermo‐oxidative stability, the high char yield was 76.0% by weight at 800°C in nitrogen atmosphere and 81.2% by weight at 600°C in air, and temperature at 5% weight loss (T_5%) in nitrogen and air was 477.9°C and 481.7°C, respectively. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and characterization of a novel acetylene‐ and maleimide‐terminated benzoxazine and its high‐performance thermosets

A novel acetylene‐ and maleimide‐terminated benzoxazine, 3‐(3‐ethynylphenyl)‐3,4‐dihydro‐2H‐6‐(N‐maleimido)‐1,3‐benzoxazine (MBZ‐apa), was successfully synthesized with N‐(4‐hydroxyphenyl)maleimide, paraformaldehyde, and 3‐aminophenylacetylene. The structure of the benzoxazine is confirmed by FTIR and ¹H‐NMR spectroscopies. MBZ‐apa is easily dissolved in common organic solvents. Differential scanning calorimetry (DSC) was used to study thermal cross‐linking behavior of MBZ‐apa. The DSC curve shows only a single exothermic peak due to the oxazine ring‐opening polymerization and the polymerization of the acetylene and maleimide groups occurring simultaneously in the same temperature range. Dynamic mechanical analyses (DMA) reveals that the novel polybenzoxazine exhibits high glass‐transition temperature (T_g) (ca. 348°C). The storage modulus arrives at 4.5 GPa in the range of room temperature to 330°C. The polybenzoxazine exhibits good thermal stability as evidenced by thermogravimetric analysis (TGA). Pyrolysis‐gas chromatography/mass spectrometry (Pyrolysis‐GC/MS) was employed to characterize the polybenzoxazine. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Crystallization,dispersion behavior and the induced properties through forming a controllable network in the crosslinked polyester‐SiO2 nanocomposites

This article describes the synthesis and characterization of two types of benzoxazine monomers based on phenol or bisphenol, aniline, and formaldehyde. Their characterization was achieved by Fourier transform infrared, ¹H-nuclear magnetic resonance, differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). Lignin polymer was characterized by infrared, DSC, and TGA. The curing behavior of mixtures of benzoxazine monomers and lignin was investigated by DSC. The mass ratios of benzoxazine monomers/lignin of a series of samples were 100 : 0, 95 : 05, 90 : 10, 85 : 15, 80 : 20, 75 : 25, and 70 : 30. The results indicate that the maximum curing temperatures of the mixtures were lower than that of the pure benzoxazine monomers, and that they decreased with increasing contents of lignin in the mixture. The heat of polymerization (ΔH) of the benzoxazine monomers and lignin mixtures as a function of the mass ratio and the structure of the benzoxazine monomers shows no definite trend. The samples were cured according to the following conditions: 170°C/2h + 200°C/2h and analyzed by DSC and TGA. In all the samples, the glass transition temperature of the benzoxazines increased upon mixing with increasing amounts of lignin. The changes may be due to the formation of a more compact network structure in the mixtures. The thermal stability of the isothermally cured resins is found to be dependent on the mass ratio of benzoxazine/lignin and structure of the benzoxazine monomers. The more lignin in the mixture, the higher is the char yield in the mixture. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Physical and mechanical properties of flexible polybenzoxazine resins: Effect of aliphatic diamine chain length

A series of linear aliphatic diamine‐based benzoxazine monomers has been polymerized into transparent, crosslinked specimens that are free of voids and have good mechanical integrity. The density of these polybenzoxazines is measured as a function of the amine chain length. Dynamic mechanical analysis of these linear aliphatic polybenzoxazines shows two, chain length dependent transitions. Properties, such as room temperature modulus, glass transition temperature, crosslink density, thermal degradation temperature, and char yield, of the polybenzoxazines are investigated as a function of the chain length. All these properties exhibit strong dependence on the chain length. These aliphatic amine‐based polybenzoxazines are found to be much more flexible than the bisphenol‐type polybenzoxazines. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2798–2809, 2006     

Studies of phosphonate‐containing bismaleimide resins. I. Synthesis and characteristics of model compounds and polyaspartimides

Two phosphonate‐containing bismaleimide (BMI) [(4,4′‐bismaleimidophenyl)phosphonate] monomers with different melting temperatures and similar curing temperatures were synthesized by reacting N‐hydroxyphenylmaleimide with two kinds of dichloride‐terminated phosphonic monomers. The BMI monomers synthesized were identified with ¹H‐, ¹³C‐, and ³¹P‐nuclear magnetic resonance (NMR) spectroscopy and elemental analysis. The phosphonate‐containing BMI monomers react with a free‐radical initiator to prepare phosphonate‐containing BMI polymers and also with various aromatic diamines to prepare a series of polyaspartimides as reactive flame retardants. The polymerization degrees of polyaspartimides depend on the alkalinity and nucleophility of diamines as chain extenders. Differential scanning calorimetry (DSC) and thermogravimetry analysis (TGA) were used to study the thermal properties of the phosphonate‐containing BMI resins such as the melting temperature, curing temperature, glass transition temperature (T_g), and thermal resistance. All the phosphonate‐containing BMI resins, except the BMI polymers, have a T_g in the range of 210–256°C and show 5% weight loss temperatures (T_5%) of 329–434 and 310–388°C in air and nitrogen atmospheres, respectively. The higher heat resistance of cured BMI resin relative to the BMI polymer is due to its higher crosslinking density. Since the recrosslinking reactions of BMI polymers and polyaspartimides occur more easily in an oxidation environment, their thermal stabilities in air are higher than are those in nitrogen gas. In addition, the thermal decomposition properties of polyaspartimides depend on the structures and compositions of both the diamine segments and the BMI segments. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1919–1933, 2002     

Novel aromatic and aromatic–aliphatic poly(thiourea‐amide)s for the extraction of toxic heavy metal ions

A series of novel aromatic and aromatic–aliphatic diamines [isophthaloyl bis(3‐(3‐aminophenyl)thiourea), terephthaloyl bis(3‐(3‐aminophenyl)thiourea), adipoyl bis(3‐(3‐aminophenyl)thiourea), sebacoyl bis(3‐(3‐aminophenyl)thiourea)] were synthesized starting from the dinitro compounds. Spectroscopic and elemental analyses were carried out for the structure elucidation of the monomers. Three series of poly(thiourea‐amide)s (PTAMs) bearing C?S groups were prepared through the condensation of new diamines with the diacid chlorides such as isophthaloyl, terephthaloyl and adipoyl chloride. The ensuing PTAMs were characterized using FTIR, ¹H‐NMR and ¹³C‐NMR techniques. Physical properties of the polymers such as solution miscibility, crystallinity, solution viscosity, molecular weight, and thermal properties were measured. Consequently, good organosolubility of these polymers was experiential in amide solvents as DMAc, DMF, DMSO and NMP. Moreover, PTAMs exhibited η_inh in the range of 0.92–1.56 dL/g and GPC measurements revealed M_w around 607 × 10²‐851 × 10². DSC served to envisage the glass transition temperatures (T_g) of poly(thiourea‐amide)s located between 232 and 258°C and the initial decomposition temperatures (T₀) probed by thermogravimetry were in the range of 305–419°C. Structure‐property relationship of these polymers was also studied. Eventually, solid?liquid extraction tests of the selected poly(thiourea‐amide)s systems revealed excellent results because these polymers show nearly 100% elimination of lead and mercury cations from water media. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Vinyl polymerization of norbornene with dinuclear diimine nickel dichloride/MAO

Vinyl‐addition polymerization of norbornene was accomplished by two novel dinuclear diimine nickel dichloride complexes in combination with methylaluminoxane (MAO). The activities were moderate. The catalyst structure, Al/Ni molar ratio, solvents, and polymerization temperature all affected the catalytic activities. The obtained polynorbornenes were characterized by ¹H‐NMR, ¹³C‐NMR, FTIR, DSC, WAXD, and intrinsic viscosity measurements. The vinyl‐addition polymers were amorphous but with a short‐range order and high packing density. The polynorbornenes showed glass transition temperatures (T_g) above 240°C and decomposed above 400°C. The catalyst structure and polymerization conditions have effects on the molecular weight and the microstructure of the polymers. The nickel complex with bulkier substituents in the ligand produced polynorbornene with a higher packing density and higher regularity and, therefore, with higher T_g. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 3273–3278, 2003     

Thermal analysis and mechanical characterization of maleimide‐functionalized benzoxazine/epoxy copolymers

Maleimide‐functionalized benzoxazine is copolymerized with epoxy to improve toughness and processibility without compromising the thermal properties. The incorporation of maleimide functionality into the benzoxazine monomer results in a high performance polymer. All three possible polymerization reactions are confirmed using Fourier transform infrared (FT‐IR) spectroscopy. While maleimide‐functionalized benzoxazine has a glass transition temperature, T_g, of 252°C, a further 25°C increase of T_g is observed when copolymerized with epoxy. The flexural properties are also measured, and the copolymers exhibit a flexural modulus of 4.2–5.0 GPa. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1670–1677, 2006     

Synthesis and characterization of 4,4′‐diaminodiphenyl methane‐based benzoxazines and their polymers

A series of diamine‐based benzoxazine precursors have been prepared using 4,4′‐diaminodiphenyl methane, formaldehyde, and different phenol derivatives including phenol, p‐cresol, and 2‐naphthol. Their chemical structures were identified by FTIR, ¹H NMR, and elemental analysis. The curing reactions of those precursors were monitored by FTIR and DSC. The obtained materials exhibited higher glass transition temperature and char yields than the corresponding bisphenol‐A based polybenzoxazines. The polybenzoxazine prepared from phenol showed the highest char yields of 65% and thermal stability with 5 and 10% weight‐loss temperatures at 346 and 432°C, respectively. The polybenzoxazine prepared from 2‐naphthol exhibited the highest glass transition temperature at 244°C. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007