Optical forces in hybrid plasmonic waveguides

We demonstrate that in a hybrid plasmonic system the optical force exerted on a dielectric waveguide by a metallic substrate is enhanced by more than 1 order of magnitude compared to the force between a photonic waveguide and a dielectric substrate. A nanoscale gap between the dielectric waveguide and the metallic substrate leads to deep subwavelength optical energy confinement with ultralow mode propagation loss and hence results in the enhanced optical forces at low input optical power, as numerically demonstrated by both Maxwell's stress tensor formalism and the coupled mode theory analysis. Moreover, the hybridization between the surface plasmon modes and waveguide modes allows efficient optical trapping of single dielectric nanoparticle with size of only several nanometers in the gap region, manifesting various optomechanical applications such as nanoscale optical tweezers.     

The substrate effect on optical response of plasmonic metamaterials

Double negative-index plasmonic metamaterials can be integrated with plasmonic photonic circuits to be applied to optical devices. The previous work fabricated the plasmonic metamaterials layers by growing gold nanostructures on glass substrate utilizing the direct current magnetron sputtering technique at room temperature. Herein, we study the effect of copper and titanium dioxide nanoparticles as a substrate on the optical response of these layers. Thin-film characterizations were analyzed by transmission electron microscopy, field emission scanning electron microscopy, powder X-ray diffraction, and UV–Visible spectroscopy. Moreover, the optical properties of thin films are described via the film matrix method, which also discusses and confirms the optical gain property of fabricated layers.

     

Strongly enhanced molecular fluorescence inside a nanoscale waveguide gap

We experimentally demonstrate dramatically enhanced light-matter interaction for molecules placed inside the nanometer scale gap of a plasmonic waveguide. We observe spontaneous emission rate enhancements of up to about 60 times due to strong optical localization in two dimensions. This rate enhancement is a nonresonant nature of the plasmonic waveguide under study overcoming the fundamental bandwidth limitation of conventional devices. Moreover, we show that about 85% of molecular emission couples into the waveguide highlighting the dominance of the nanoscale optical mode in competing with quenching processes. Such optics at molecular length scales paves the way toward integrated on-chip photon source, rapid transfer of quantum information, and efficient light extraction for solid-state-lighting devices.     

A Self-Assembled Plasmonic Substrate for Enhanced Fluorescence Resonance Energy Transfer

Fluorescence resonance energy transfer (FRET) has found widespread uses in biosensing, molecular imaging, and light harvesting. Plasmonic metal nanostructures offer the possibility of engineering photonic environment of specific fluorophores to enhance the FRET efficiency. However, the potential of plasmonic nanostructures to enable tailored FRET enhancement on planar substrates remains largely unrealized, which are of considerable interest for high-performance on-surface bioassays and photovoltaics. The main challenge lies in the necessitated concurrent control over the spectral properties of plasmonic substrates to match that of fluorophores and the fluorophore–substrate spacing. Here, a self-assembled plasmonic substrate based on polydopamine (PDA)-coated plasmonic nanocrystals is developed to effectively address this challenge. The PDA coating not only drives interfacial self-assembly of the nanocrystals to form closely packed arrays with customized optical properties, but also can serve as a tailored nanoscale spacer between the fluorophores and plasmonic nanocrystals, which collectively lead to optimized fluorescence enhancement. The biocompatible plasmonic substrate that allows convenient bioconjugation imparted by PDA has afforded improved FRET efficiency in DNA microarray assay and FRET imaging of live cells. It is envisioned that the self-assembled plasmonic substrates can be readily integrated into fluorescence-based platforms for diverse biomedical and photoconversion applications.     

Dark plasmon of the rotated silver triangular nanoplate dimer

Rotated dimers are the common products during the deposition of Ag triangular nanoplates dimers on the glass substrate. In this work, modeling a silver dimer that it rotated around the Z axis shows that the wavelength and intensity of the dark plasmon are flexibly modulated by changing the angle’s rotation. Our results show that there are four main plasmonic bands. These resonances are formed due to the plasmon coupling between the dipole mode and quadrupole mode. In addition, the charge density distributions show a high degree of localization near both sides and corners of the nanotriangles. Moreover, It is found that the figure of merit (FOM) has the highest value for θ?=?71° due to the lowest value of the full wide at half maximum (FWHM) of the resonance peak. This study may be used to build optical sensors based on metallic nanoparticles with new plasmonic properties.     

Active coherent control of nanoscale light confinement: Modulation of plasmonic modes and position of hotspots for surface-enhanced Raman scattering detection

Multistep plasmonic nanostructures can induce the deep modulation of electromagnetic-field interactions on the nanoscale for positioning hotspots, and this generation of enhanced fields is important in many optical applications. In this article, a new strategy is proposed for fabricating a plasmonic doublestacked nanocone (DSC) nanostructure. In the DSC structure, a tunable plasmonic hybrid mode proceeds from the strong coupling of the plasmonic resonance of a fundamental cavity mode with a localized surface plasmon gap mode. In the nanostructure, the far-field response is deeply modulated and the hottest spots can be effectively positioned on the top surface of the DSC nanostructure. A controllable and cost-effective mask-reconfiguration technique for manufacturing the multiscale nanostructure is developed, which guarantees the generation of the introduced crucial stage on the DSC nanostructure. To evaluate the features of the plasmonic resonance, the DSC nanostructure is used as a surface-enhanced Raman scattering (SERS) substrate for detecting 4-mercaptopyridine molecules under specific excitation conditions. Its good performance, with an average measured SERS enhancement factor as high as 10⁸, demonstrates its strong plasmonic-mode hybridization and extreme field enhancement.

Open image in new window

     

Band-selective optical polarizer based on gold-nanowire plasmonic diffraction gratings

We report a plasmonic diffraction grating device as a new kind of optical polarizer. This simple device consists of periodically distributed gold nanowires on top of a transparent glass substrate and is based on the strong polarization dependence of the particle plasmon resonance of the gold nanowires. A high-efficiency secondary diffraction in the same device enhances the polarization extinction ratio significantly. Linearly polarized spectrum in the red with a bandwidth of 53 nm is selectively picked up from the nonpolarized white light, where a polarization extinction ratio higher than 100 at about 650 nm has been achieved. The idea of plasmonic diffraction grating is important for exploiting new detection and sensor techniques.     

Optical bistability in metal-insulator-metal plasmonic Bragg waveguides with Kerr nonlinear defects

We numerically investigate the characteristics of the defect mode and the nonlinear effect of optical bistability in metal-insulator-metal (MIM) plasmonic Bragg grating waveguides with Kerr nonlinear defects. By means of finite-difference time-domain simulations, we find that the defect mode peak exhibits a blueshift and height-rise by enlarging the width of the defect layer, and it has a redshift and height-fall with the increase of the dielectric constant of defect layer. Obvious optical bistability is obtained in our waveguides with a length of less than 2 μm. The results show that our structure could be applied to the design of all-optical switching in highly integrated optical circuits.     

Phase effects in guided mode resonances II: measuring the angular phase of a surface plasmon polariton

We show how the phase of a resonant interaction between a focused beam and a guided mode can be directly observed in a pupil imaging experiment, in which the irradiance leaving the pupil of a standard microscope is relayed to an image sensor through a combination Wollaston prism, calcite beam splitter and polarizer. We apply the method to the observation of a surface plasmon polariton resonance excited in a corrugated silver film fabricated using electron beam lithography. We discuss how this particular imaging configuration could be adapted for applications in plasmonic optical sensing.     

Direct observation of plasmonic index ellipsoids on a deep-subwavelength metallic grating

We constructed a metallic grating on a deep-subwavelength scale and tested its plasmonic features in visible frequencies. The deep-subwavelength metallic grating effectively acts as an anisotropic homogeneous uniaxial form-birefringent metal, exhibiting different optical responses for polarizations along different optical axes. Therefore, this form-birefringent metal supports anisotropic surface plasmon polaritons that are characterized by directly imaging the generated plasmonic index ellipsoids in reciprocal space. The observed plasmonic index ellipsoids also show a rainbow effect, where different colors are dispersively distributed in reciprocal space.     

Enhanced nanoplasmonic optical sensors with reduced substrate effect

We present a straightforward method to double the refractive index sensitivity of surface-supported nanoplasmonic optical sensors by lifting the metal nanoparticles above the substrate by a dielectric nanopillar. The role of the pillar is to substantially decrease the spatial overlap between the substrate and the enhanced fields generated at plasmon resonance. Data presented for nanodisks and nanoellipsoids supported by pillars of varying heights are found to be in excellent agreement with electrodynamics simulations. The described concepts apply to multitude of plasmonic nanostructures, fabricated by top-down or bottom-up techniques, and are likely to further facilitate the development of novel nanooptical sensors for biomedicine and diagnostics.     

Induced chirality through electromagnetic coupling between chiral molecular layers and plasmonic nanostructures

We report a new approach for creating chiral plasmonic nanomaterials. A previously unconsidered, far-field mechanism is utilized which enables chirality to be conveyed from a surrounding chiral molecular material to a plasmonic resonance of an achiral metallic nanostructure. Our observations break a currently held preconception that optical properties of plasmonic particles can most effectively be manipulated by molecular materials through near-field effects. We show that far-field electromagnetic coupling between a localized plasmon of a nonchiral nanostructure and a surrounding chiral molecular layer can induce plasmonic chirality much more effectively (by a factor of 10(3)) than previously reported near-field phenomena. We gain insight into the mechanism by comparing our experimental results to a simple electromagnetic model which incorporates a plasmonic object coupled with a chiral molecular medium. Our work offers a new direction for the creation of hybrid molecular plasmonic nanomaterials that display significant chiroptical properties in the visible spectral region.     

Tunable plasmon-induced transparency based on graphene nanoring coupling with graphene nanostrips

We numerically and theoretically demonstrate a plasmon-induced transparency (PIT) at the mid-infrared region with finite-difference time-domain method. The system consists of an optically bright dipole mode and a dark quadrupole mode, which are supported by the graphene nanoring and graphene nanostrips, respectively. The coupling between the two modes introduces transparency window and large group delays. The pronounced PIT resonance can be easily modified by adjusting the geometric parameters and the Fermi level of graphene nanostructure. Our results suggest that the demonstrated PIT effect may be applicated in the slow-light device, active plasmonic switching, and optical sensing.     

Ultracompact beam splitters based on plasmonic nanoslits

An ultracompact plasmonic beam splitter is theoretically and numerically investigated. The splitter consists of a V-shaped nanoslit in metal films. Two groups of nanoscale metallic grooves inside the slit (A) and at the small slit opening (B) are investigated. We show that there are two energy channels guiding light out by the splitter: the optical and the plasmonic channels. Groove A is used to couple incident light into the plasmonic channel. Groove B functions as a plasmonic scatter. We demonstrate that the energy transfer through plasmonic path is dominant in the beam splitter. We find that more than four times the energy is transferred by the plasmonic channel using structures A and B. We show that the plasmonic waves scattered by B can be converted into light waves. These light waves redistribute the transmitted energy through interference with the field transmitted from the nanoslit. Therefore, different beam splitting effects are achieved by simply changing the interference conditions between the scattered waves and the transmitted waves. The impact of the width and height of groove B are also investigated. It is found that the plasmonic scattering of B is changed into light scattering with increase of the width and the height of B. These devices have potential applications in optical sampling, signal processing, and integrated optical circuits.     

Plasmonic whispering gallery cavities as optical nanoantennas

We study the resonant modes of surface plasmon whispering gallery cavities based on a circular groove in a Au surface. We use spatially, angle-, and polarization-resolved cathodoluminescence spectroscopy to measure the resonant plasmonic local field distribution at deep-subwavelength resolution and determine the far-field radiation distribution for each plasmonic mode. We show mode-selective excitation of the plasmonic modes and resolve the modal angular radiation pattern. The results show that plasmonic whispering gallery resonators can be used as versatile antennas both in receiving and transmitting mode.     

Toward plasmonic polymers

We establish the concept of a plasmonic polymer, whose collective optical properties depend on the repeat unit. Experimental and theoretical analyses of the super- and sub- radiant plasmon response of plasmonic polymers comprising repeat units of single nanoparticles or dimers of gold nanoparticles show that (1) the redshift of the lowest energy coupled mode becomes minimal as the chain approaches the infinite chain limit at a length of ～10 particles, (2) the presence and energy of the modes are sensitive to the geometries of the constituents, that is, repeat unit, but (3) spatial disorder and nanoparticle heterogeneity have only small effects on the super-radiant mode.     

Plasmonic nearfield scanning probe with high transmission

Nearfield scanning optical microscopy (NSOM) offers a practical means of optical imaging, optical sensing, and nanolithography at a resolution below the diffraction limit of the light. However, its applications are limited due to the strong attenuation of the light transmitted through the subwavelength aperture. To solve this problem, we report the development of plasmonic nearfield scanning optical microscope with an efficient nearfield focusing. By exciting surface plasmons, plasmonic NSOM probes are capable of confining light into a 100 nm spot. We show by nearfield lithography experiments that the intensity at the near field is at least one order stronger than the intensity obtained from the conventional NSOM probes under the same illumination condition. Such a high efficiency can enable plasmonic NSOM as a practical tool for nearfield lithography, data storage, cellular visualization, and many other applications requiring efficient transmission with high resolution.     

Optical spin Hall effects in plasmonic chains

Observation of optical spin Hall effects (OSHEs) manifested by a spin-dependent momentum redirection is presented. The effect occurring solely as a result of the curvature of the coupled localized plasmonic chain is regarded as the locally isotropic OSHE, while the locally anisotropic OSHE arises from the interaction between the optical spin and the local anisotropy of the plasmonic mode rotating along the chain. A wavefront phase dislocation was observed in a circular curvature, in which the dislocation strength was enhanced by the locally anisotropic effect.     

High-Speed Parallel Plasmonic Direct-Writing Nanolithography Using Metasurface-Based Plasmonic Lens

Simple and efficient nanofabrication technology with low cost and high flexibility is indispensable for fundamental nanoscale research and prototyping. Lithography in the near field using the surface plasmon polariton (i.e., plasmonic lithography) provides a promising solution. The system with high stiffness passive nanogap control strategy on a high-speed rotating substrate is one of the most attractive high-throughput methods. However, a smaller and steadier plasmonic nanogap, new scheme of plasmonic lens, and parallel processing should be explored to achieve a new generation high resolution and reliable efficient nanofabrication. Herein, a parallel plasmonic direct-writing nanolithography system is established in which a novel plasmonic flying head is systematically designed to achieve around 15 nm minimum flying-height with high parallelism at the rotating speed of 8–18 m·s⁻¹. A multi-stage metasurface-based polarization insensitive plasmonic lens is proposed to couple more power and realize a more confined spot compared with conventional plasmonic lenses. Parallel lithography of the nanostructures with the smallest (around 26 nm) linewidth is obtained with the prototyping system. The proposed system holds great potential for high-freedom nanofabrication with low cost, such as planar optical elements and nano-electromechanical systems.