Effect of zinc-free phosphate-based anticorrosion pigment on the cathodic disbondment of epoxy-polyamide coating

In the field of protective coatings, zinc-free pigments are proposed as promising anticorrosion compounds due to their excellent environmentally-friendly profile. In this paper, cathodic disbonding performance of a solvent-borne epoxy primer incorporating strontium aluminum polyphosphate (SAPP) as a zinc-free phosphate-based anticorrosion pigment was investigated. Regardless of the applied potential, the presence of SAPP in the coating formulation caused slower growth of the delamination area in comparison to ZP. According to the data obtained from EIS and SEM/EDX, this behavior was attributed to locally controlled pH and the precipitated film restricting active zones available for electrochemical reactions.     

Effects of a small addition of Mn on the corrosion behaviour of Zn in a mixed solution

The effects of a small addition of Mn (0.4 wt%) on the corrosion behaviour of pure Zn (99.995 wt%) in a mixed solution (0.1 M NaCl + 0.1 M Na₂SO₄ + 0.01 M NaHCO₃, pH 8.4) were investigated by electrochemical impedance spectroscopy (EIS), potentiodynamic polarization and X-ray photoelectron spectroscopy (XPS). The electrochemical impedances of both Zn and Zn–0.4Mn have been successfully fitted with a suitable EIS equivalent circuit model. Fitted impedance results revealed that 0.4 wt% Mn improved both the pore resistance and charge transfer resistance of Zn in the mixed solution. As a result, both anodic and cathodic reaction rates were reduced. X-ray photoelectron spectroscopy (XPS) analysis showed that the corrosion films formed in the mixed solution consisted of zinc oxide (ZnO), zinc hydroxide (Zn(OH)₂) and zinc hydrozincite (Zn₅(CO₃)₂(OH)₆). The role of small addition of Mn is that it promotes the precipitation of hydrozincite in the pores of corrosion film. An “alleviation of local acidification” mechanism is proposed to explain the investigated results.     

Electrochemical impedance spectroscopy investigations of epoxy zinc rich coatings: Role of Zn content on corrosion protection mechanism

Effect of zinc content in the epoxy zinc rich coating on the mechanism of corrosion protection was investigated using electrochemical impedance spectroscopy (EIS). The zinc content in the coating (on dry film) was varied from 40% to 90% in steps of 10%. Open circuit potential (OCP) measurements and salt spray tests were also carried out to generate supporting evidences and to deepen the understanding in the area of zinc rich coatings. The healing or bridging ability of these coatings was studied by making a scribe on the coating and monitoring the evolution of OCP. EIS was also utilized to screen the amount of zinc particles required to provide efficient galvanic protection and to study the effect of purity of Zn on corrosion protection performance. Both EIS and OCP measurements indicate that coatings containing 40% Zn (on dry film) provides very good barrier protection coming mainly from polymer whereas the one containing >80% Zn provides excellent galvanic protection to the steel substrate. When the zinc loading is between 60% and 70%, coatings neither show barrier protection nor galvanic protection.     

Mica/polypyrrole (doped) composite containing coatings for the corrosion protection of cold rolled steel

Micas/polypyrroles (PPys) doped with molybdate, p-toluene sulfonate, dodecyl benzene sulfonate, and 2-naphthalene sulfonate composite pigments were synthesized by chemical oxidative polymerization and characterized in coatings for corrosion protection on cold rolled steel substrate by various electrochemical techniques. Synthesized composite pigments were characterized for morphology by scanning electron microscopy, which indicated physical formation of PPy on the surface of mica. Chemical composition of the composite pigments was analyzed by X-ray photoelectron spectroscopy which chemically confirmed doped PPy formation on the mica surface. Coatings were formulated at 20% pigment volume concentration (composite pigments or as-received mica pigment) and were applied on cold rolled steel substrate. Coatings were exposed to salt spray test conditions (ASTM B117) for 30 days and were periodically assessed for corrosion with electrochemical impedance spectroscopy (EIS), open circuit potential (OCP), and potentiodynamic polarization. EIS and circuit modeling results demonstrated higher coating resistance (R _c) for mica/PPy (doped) composite coatings as compared to as-received mica pigment containing coating after 30 days of salt spray exposure. Lower current density and more positive corrosion potential values were observed for mica/PPy (doped) composite coatings as compared to mica pigment-based coating in potentiodynamic polarization measurements, indicating improved corrosion protection for cold rolled steel substrate. OCP measurements revealed more positive values for mica/PPy (doped) composite coatings as compared to mica pigment-based coating suggesting superior corrosion protection for mica/PPy (doped) composites.     

Anticorrosion efficiency of zinc-filled epoxy coatings containing conducting polymers and pigments

The dependence of the corrosion-inhibiting properties of zinc-filled organic coatings on the nature of the conducting polymers and conducting pigments added and on the pigment particles’ surface coating with conducting polymer layers were investigated. The following materials were selected to examine the corrosion-inhibiting properties of the conducting polymers: polyaniline phosphate (PANI), polypyrrole (PPy), natural graphite, and carbon nanotubes. Conducting pigment combinations for application in coating materials were formulated by applying pigment volume concentrations (PVC) of 0.3%, 0.5% and 1%, which were completed with Zn dust to obtain pigment volume concentrations/critical pigment volume concentrations (PVC/CPVC) = 0.64. Such conducting pigment/zinc dust combinations represented corrosion inhibitors to be used as ingredients in protective coatings. Solvent-based 2K epoxy resin based coating materials containing the corrosion inhibitors so formulated were prepared to examine their anticorrosion properties. The pigmented coatings were subjected to laboratory corrosion tests in simulated corrosion atmospheres and to standardized mechanical resistance tests. The protective coatings so obtained exhibited a higher efficiency than coating materials containing zinc dust alone. The coating material containing carbon nanotubes at PVC = 1% and the coating material containing graphite coated with polypyrrole (C/PPy) at PVC = 0.5% emerged as the best zinc-filled coating materials with respect to their corrosion-inhibiting efficiency. Treatment with the conducting polymers had a beneficial effect on the coating materials’ mechanical properties.     

Studying the corrosion protection properties of an epoxy coating containing different mixtures of strontium aluminum polyphosphate (SAPP) and zinc aluminum phosphate (ZPA) pigments

Epoxy/polyamide coatings were loaded with different mixtures of strontium aluminum polyphosphate (SAPP) and zinc aluminum phosphate (ZPA) pigments. Moreover, a coating containing zinc phosphate (ZP) was prepared as a reference sample. The coatings were applied on St-37 steel substrates and then were exposed to 3.5 wt% NaCl solution up to 35 days. The corrosion inhibition properties of the pigments extracts were studied on bare steel samples by a potentiodynamic polarization technique after 24 h immersion. The morphological properties and corrosion resistance of the coatings were investigated by scanning electron microscope (SEM), optical microscope, electrochemical impedance spectroscopy (EIS) and salt spray tests.     

The effects of zinc aluminum phosphate (ZPA) and zinc aluminum polyphosphate (ZAPP) mixtures on corrosion inhibition performance of epoxy/polyamide coating

The epoxy/polyamide coating was loaded with different pigment mixtures of the zinc phosphate (ZP), zinc aluminum phosphate (ZPA) and zinc aluminum polyphosphate (ZAPP) pigments. The electrochemical impedance spectroscopy (EIS) and salt spray test were used to investigate corrosion inhibition performance of the coatings. The adhesion strengths of the coatings were measured by a pull-off test. Results revealed lower coating pull-off strength loss when the ZPA and ZAPP pigments were used. A significant decrease in number of blisters together with low pull-off strength loss and best corrosion inhibition properties were observed when the mixture of 80:20 of ZAPP:ZPA was used.     

Study of the anticorrosive behaviour of epoxy binders containing non-toxic inorganic corrosion inhibitor pigments

The anticorrosive performance of epoxy coatings pigmented with non-toxic corrosion inhibitors pigments was investigated in this work. The coatings used contained the following pigments: zinc phosphate (ZP), zinc phosphomolybdate (ZPM) and zinc calcium phosphomolybdate (ZCPM). For comparative studies epoxy coatings with the following compositions were made up: one only with filler (CRG); one without pigments, varnish (VR) and other with zinc chromate (ZC) pigment. The corrosion inhibitor performance of the coatings was evaluated by immersion tests in 0.01 mol L⁻¹ NaCl aqueous solutions and accelerated tests in a salt spray chamber. The corrosion inhibitor performance of the samples was monitored using open-circuit potential (E_oc) measurements and electrochemical impedance spectroscopy (EIS) technique. Complementary tests were carried out using water vapour permeability of free-standing films and thermogravimetric (TG) analysis. The permeability test showed that the addition of the studied pigments did not modify the barrier properties of the free-films in comparison that pigmented with chromate. Thermal analysis indicated that the addition of the pigments improved the thermal stability of the coatings and it suggested a resin/pigment interaction. The total immersion tests and salt spray tests demonstrated that the barrier properties of the coatings pigmented with the inhibitors were not degrading as much as that pigmented with ZC. Therefore, all the three pigments could replace ZC as an anticorrosive pigment in similar conditions to those described here. The best corrosion inhibitor performance in the total immersion test was presented by the ZPM and ZCPM coatings while in the salt spray test the corrosion inhibitor performance of all the three pigmented coatings was similar, suggesting that only in the less aggressive test is possible to detect any difference between the coatings with the non-toxic pigments.     

Electrochemical assessing corrosion inhibiting effects of zinc aluminum polyphosphate (ZAPP) as a modified zinc phosphate pigment

Undesirable anti-corrosion performance of zinc phosphate pigment, the classical chromate replacement, has led researchers to take modification into account. Polyphosphate-based anti-corrosion pigments as a result of modification of zinc orthophosphate have been found to function much more efficiently. This study aimed to evaluate performance of steel samples immersed in 3.5% NaCl aqueous solution-containing zinc aluminum polyphosphate (ZAPP) pigment extract compared to those involving conventional zinc phosphate (ZP) pigment extract and also no pigment (blank) using electrochemical tests such as electrochemical impedance spectroscopy (EIS) and linear polarization (LP) as well as surface analysis. Impedance spectra and polarization curves revealed two different trends, showing the superiority of ZAPP pigment. Based on the results of scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDX), presence of a precipitated layer on the surface was confirmed when steel sample was immersed into the solution-containing ZAPP.     

Electrochemical examining behavior of epoxy coating incorporating zinc-free phosphate-based anticorrosion pigment

Protective performance of the epoxy primer containing strontium aluminum polyphosphate (SAPP) as a zinc-free phosphate-based anticorrosion pigment is aimed to assess in this work through taking advantage of electrochemical impedance spectroscopy (EIS) and electrochemical noise method (ENM). The absence of zinc offers an excellent environmentally friendly profile to the class of inhibiting compound. In the pigment extracts, the electrochemical techniques revealed superiority of SAPP compared to the conventional zinc phosphate (ZP). The behavior was connected to precipitation of a protective layer on the surface exposed to SAPP. In comparison with ZP, the most effective SAPP content in the protective primer was then determined using EIS.     

Formation of hollow ZnO particles by simple hydrolysis of zinc acetylacetonate

Formation of hollow ZnO particles by simple hydrolysis of zinc acetylacetonate [Zn(acac)₂] at 90 °C was monitored. Isolated precipitates were characterized with XRD, FT-IR and FE-SEM. Different amounts of Zn(acac)₂ underwent the hydrolysis in 1 × 10^?3 M NaOH for 24 h. The conditions for the formation of hollow ZnO particles were determined and the process was explained by the aggregation mechanism.     

A study of the corrosion resistance of a waterborne acrylic coating modified with nano-sized titanium dioxide

The incorporation of nano-sized inorganic pigment particles into organic coatings may offer the potential for improving many of their properties, including corrosion resistance, at relatively low loadings. In the present research, titanium dioxide with a crystallite size of 5-10 nm was added to a waterborne organic primer formulation at loadings from 0.1 to 5% (w/w) and applied to hot-dip galvanized steel (HDG) panels. The corrosion resistance of the modified coatings was measured by neutral salt spray corrosion testing and electrochemical impedance spectroscopy (EIS), with an unpigmented film tested for comparison. 3% (w/w) TiO₂ appeared to produce an optimum improvement in the corrosion resistance.     

The protective properties of epoxy coating electrodeposited on Zn–Mn alloy substrate

The epoxy coating was cataphoretically deposited on steel and steel modified by electroplated Zn–Mn alloy of different chemical contents. The samples were immersed in 0.5 mol dm⁻³ NaCl solution for 60 days. The electrochemical impedance spectroscopy (EIS) analysis showed that the values of pore resistance for epoxy coating on steel and Zn–Mn alloy with 16 at.% Mn were two orders of magnitude higher, while the capacitance values were two orders of magnitude lower than those for the epoxy coating on Zn–Mn alloy substrates with 5 and 8 at.% Mn. It was assumed that the main reason for such a difference was metallic substrate dissolution during cataphoretic deposition, due to high pH (12.9). This assumption was supported by energy dispersive X-ray spectrometry (EDS) measurements showing that the amount of released Zn in epoxy coatings decreased as Mn percent in the Zn–Mn alloys increased. In addition, Zn–Mn alloy coatings on steel, as well as bare steel, were immersed in 0.1 mol dm⁻³ NaOH solution, pH 12.9, simulating conditions during cataphoretic deposition, and polarization resistance measurement in this solution indicated that Mn inclusions in Zn–Mn alloy substrate prevent Zn dissolution in alkaline medium.     

Sodium zinc phosphate as a corrosion inhibitive pigment

A sodium zinc phosphate pigment synthesized using a co-precipitation method and characterized by X-ray diffraction was investigated for its corrosion inhibition activity in comparison with the commercial zinc phosphate using EIS in a 3.5% NaCl solution. A mild steel surface analysis after exposure to the test solutions was conducted using scanning electron microscope-energy dispersive X-ray and infrared spectroscopies. The results indicate that the corrosion inhibitive performance of the synthesized pigment is higher than that of the commercial zinc phosphate. This can be the result of the synthesized pigment's relatively high solubility, which affects the precipitation of a phosphate layer onto the mild steel surface and the modification of the crystalline structure of the corrosion products in the presence of the inhibitive pigment. The salt spray and wet pull-off tensile strength results revealed an improved corrosion protection of the coatings formulated with SZP.     

Electrochemical and anticorrosion performances of zinc-rich and polyaniline powder coatings

In this work, hydrochloride polyaniline (PANI-Cl) powder was incorporated as a conductive pigment into powder zinc-rich primer (ZRP) formulations in order to enhance the electronic conduction paths between zinc particles inside the coating and the steel substrate (i.e. percolation). Coatings were applied onto steel substrates and immersed in a 3% NaCl solution at ambient temperature.The protective properties and electrochemical behaviour of coatings were investigated by monitoring the free corrosion potential versus time and by using EIS. It was found that corrosion potential remains cathodic and constant for a long time up to 100 days of immersion. From EIS results, it was shown that the coatings exhibit larger impedance values than those observed with liquid or other zinc-rich powder formulations containing carbon black. From Raman spectroscopy results, it may be proposed that zinc particles in contact with PANI-Cl pigments were passivated. Other zinc particles remain still active which ensures the cathodic protection of the substrate. Moreover, coatings exhibit good barrier properties.     

Corrosion protection of mild steel by polyvinylsilsesquioxanes coatings in 3% NaCl solution

Polyvinylsilsesquioxanes (PVS) coatings were synthesized by the hydrolytic polycondensation of vinyltrimethoxysilane using hydrochloric acid as a catalyst. Their structure was characterized by Fourier transform IR (FTIR) and the viscosity [in centipoise(cP)] of polyvinylsilsesquioxanes was measured at 298 K. The electrochemical behavior of I–IV coated steel electrodes, of polymer concentration as follows: [I(20%), II(40%) of viscosity 50 cP and III(20%), IV(40%) of viscosity 15 cP], was investigated in 3% NaCl solution using various electrochemical techniques, i.e., open-circuit potential (OCP), potentiodynamic polarization, electrochemical impedance measurements (EIS), and surface examination via scanning electron microscope (SEM) technique. The influence of immersion time on the electroctrochemical behavior of polysilsesquioxane-coated electrodes was also studied. The results of polarization measurements showed that corrosion current density (i _corr) decreases in the order IV > III > II > I. Also, the film resistance is the highest for PVS-coated electrode I as evaluated from EIS measurements. OCP, EIS, and polarization results are in good agreement with each other. The obtained results were confirmed by surface examination using scanning electron microscope.     

Effects of Zn and Pb as alloying elements on the electrochemical behaviour of brass in borate solutions

The electrochemical behaviour of brasses with various Zn content (5.5–38) and brass (Cu–38Zn) with different Pb content (1.3–3.3) in borate solution, pH 9.0, was investigated. The effects of applied potential and the presence of aggressive Cl^– ions were also studied. Different electrochemical methods such as open-circuit potential measurements, polarization techniques and electrochemical impedence spectroscopy (EIS) were used. Increase in zinc content decreases the corrosion rate of brass in borate solution exponentially. Long immersion of leaded brasses and alloys with different Zn content improves their stability due to the formation of a passive film. The passive film formation under open-circuit and potentiostatic conditions proceeds via dissolution–precipitation mechanism. The addition of a low concentration of Cl^– ion (0.01 M) to the borate solution increases the corrosion rate of Cu–38Zn due to dezincification. Increase in Cl^– ion concentration (0.01–0.2 M) decreases the corrosion rate of the brass exponentially due to formation of insoluble CuCl. For Cl^– ion concentrations >0.2 M the corrosion rate of the brass increases again due to the formation of the soluble CuCl₂ ^– complex.     

Performance of zinc phosphate coatings obtained by cathodic electrochemical treatment in accelerated corrosion tests

The formation of zinc phosphate coating by cathodic electrochemical treatment and evaluation of its corrosion resistance is addressed. The corrosion behaviour of cathodically phosphated mild steel substrate in 3.5% sodium chloride solution exhibits the stability of these coatings, which lasts for a week's time with no red rust formation. Salt spray test convincingly proves the white rust formation in the scribed region on the painted substrates and in most part of the surface on unpainted surface. The protective ability of the zinc corrosion product formed on the surface of the coated steel is evidenced by the decrease in the loss in weight due to corrosion of the uncoated mild steel, when it is galvanically coupled with cathodically phosphated mild steel. Potentiodynamic polarization curves reveal that E_corr shifts towards higher cathodic values (in the range of −1000 to −1100 mV versus SCE) compared to that of uncoated mild steel and conventionally phosphated mild steel substrates. The i_corr value is also very high for these coatings. EIS studies reveal that zinc dissolution is the predominant reaction during the initial stages of immersion. Subsequently, the non-metallic nature of the coating is progressively increased due to the formation of zinc corrosion products, which in turn enables an increase in corrosion resistance with increase in immersion time. The zinc corrosion products formed may consist of zinc oxide and zinc hydroxychloride.     

Electropolymerization, characterization and corrosion performance of poly(N-ethylaniline) on copper

Poly(N-ethylaniline) (PNEA) coatings were grown by cyclic voltammetry technique on copper from 0.1 M N-ethylaniline (NEA) in 0.3 M oxalic acid solution. The optimum conditions (e.g. upper potential limit, scan rate and cycle number) effect on corrosion performance of synthesized PNEA films were determined in order to obtain best protection results against corrosion. The electrodeposited coatings were characterized by cyclic voltammetry (CV), Fourier Transform Infrared-Attenuated Total Reflectance (FTIR-ATR) spectroscopy and scanning electron microscopy (SEM). Redox parameters were found after electrochemical tests and results of stability tests of these films impart an electroactive behavior that is composed of both diffusion control and thin film behavior. In addition, corrosion performance of PNEA coatings were investigated in 0.1 M H₂SO₄ by Tafel extrapolation and electrochemical impedance spectroscopy (EIS) techniques.     

Conductivity and anticorrosion performance of polyaniline/zinc composites: Investigation of zinc particle size and distribution effect

Polyaniline/zinc composites and nanocomposites were prepared using solution mixing method. Zinc (Zn) particles with an average particle size of 60 μm and zinc nanoparticles with an average particle size of 35 nm were used as fillers in polyaniline (PANI) matrix. Films and coatings of PANI/Zn composites and nanocomposites were prepared by the solution casting method. Electrical conductivity and anticorrosion properties of PANI/Zn composite and nanocomposite films and coatings with different zinc loadings were evaluated. According to the results, electrical conductivity and anticorrosion performances of both PANI/Zn composites and nanocomposites were increased by increasing the zinc loading. Also results showed that the PANI/Zn nanocomposite films and coatings have better electrical conductivity and corrosion protection effect on iron coupons compared to that of PANI/Zn composite.