共查询到19条相似文献,搜索用时 93 毫秒
1.
2.
3.
基于Pro/E和ANSYS Workbench的齿轮有限元分析 总被引:2,自引:0,他引:2
基于Pro/E平台,通过参数化方法建立齿轮模型,导入ANSYS Workbench中,用有限元法对齿轮接触处的接触应力进行分析,获得齿轮的真实应力场,从而精确分析了齿轮的结构强度。 相似文献
4.
5.
6.
7.
8.
针对四圆弧齿轮的轮齿是三维螺旋体的特点以及其几何设计与力学计算复杂的实际情况,采用三维有限元法,以VC++6.0为开发工具,基于OpenGL图形内核自主开发了一款四圆弧齿轮有限元分析专用软件,包括四圆弧齿轮三维实体模型参数化计算机辅助设计、有限元网格的自动生成、边界条件的建立、最恶劣加载点的确定以及应力的计算,工程人员只需输入四圆弧齿轮的基本参数,即可自动实现四圆弧齿轮的参数化CAD建模和有限元分析。通过与SolidWorks软件中的Simulation有限元分析模块进行对比,验证了所述软件分析结果的正确性。 相似文献
9.
简要介绍了CATIA中参数化设计的基本方法与设计步骤。通过渐开线齿轮的参数化设计,详细阐述了基于CATIA的参数化设计方法。并利用CATIA软件自带的CAE模块,结合渐开线齿轮传动原理,对齿轮实际工况进行了有限元分析并与传统算法进行对比,从而为工程分析提供数据参考。 相似文献
10.
11.
为了提高齿轮设计的准确性,结合UG软件参数化建模功能,建立齿轮传动三维实体模型。利用ADAMS软件对齿轮传动系统进行了动力学分析,在高速传动中施加实际传动载荷,得到了齿轮传动系统的振动频率范围和高频率点。通过ANSYS Workbench软件对齿轮传动系统和单一齿轮模型进行模态分析,得到齿轮传动系统和齿轮模型的固有频率和振型,通过与动力学分析得到的频率进行对比,验证了齿轮传动系统的设计准确性,从而为今后齿轮的传动分析提供了数据支持,并为传动过程中的故障分析提供了参考。 相似文献
12.
13.
以插入算法实现齿廓的电脑图形生成熏进一步设计成菜单命令。通过对输出齿形进行编辑分析熏为齿轮、滚刀设计提供直观的分析手段。 相似文献
14.
重点研究了变模数、变压力角插齿刀的设计原理,通过插齿刀设计计算示例的验证,分析变模数、变压力角选取方式,并且通过各种齿轮的插齿加工,着重介绍其设计原理应用的领域。 相似文献
15.
基于Pro/E与Ansys软件的集成分析平台,对推土机终传动齿轮进行参数化设计、有限元分析及模态分析,提高了建模和分析效率,实现了对齿轮的绿色设计,为其他产品绿色设计提供可靠、有效的技术支持和技术依据。 相似文献
16.
Ooi JongBoon Wang Xin Tan ChingSeong Ho Jee-Hou Lim Ying Pio 《Journal of Mechanical Science and Technology》2012,26(2):575-589
The portal axle is a gearbox that is specially designed for off-road driving conditions. It is installed between the wheel
and the axle shaft to give higher ground clearance to the vehicle. The modeling and simulation of spur gears in portal axle
is important to predict the actual motion behavior. However, gear train design in portal axle is difficult to study comprehensively
due to their relatively low cost and short product life cycle. In this study, modal analysis of portal axle is simulated using
finite element method (FEM). Modal analysis is simulated on three different combinations of gear train system commonly designed
for portal axle. The three gear trains being analyzed are gear train without idler gear, one idler gear and two idler gears.
FEM static stress analysis is also simulated on three different gear trains to study the gear teeth bending stress and contact
stress behavior of the gear trains in different angular positions from 0° to 18°. The single and double pair gear teeth contact
are also considered. This methodology serves as a novel approach for gear train design evaluation, and the study of gear stress
behavior in gear train which is needed in the small workshop scale industries. 相似文献
17.
基于SolidWorks的直齿锥齿轮参数化设计及有限元分析 总被引:1,自引:0,他引:1
介绍采用VB对SolidWorks进行二次开发的方法来实现直齿锥齿轮参数化设计的基本思想和实现流程;利用COSMOS软件,对直齿锥齿轮在一定载荷作用下的应力状态进行有限元分析.研究结果对齿轮模型库的开发和优化齿轮设计参数等有一定的参考价值. 相似文献
18.
19.
利用反转法对摆动活齿传动进行了分析,建立了摆动活齿传动内齿圈的方程;探讨了利用Pro/E设计摆动活齿内齿圈的方法,应用Pro/E的二次开发工具模块program的编程功能,成功地实现了内齿圈的参数化自动造型,从而大大地提高了内齿圈的设计效率. 相似文献