Bio-/Environment-Friendly Cationic Gemini Surfactant as Novel Corrosion Inhibitor for Mild Steel in 1 M HCl Solution

Bio-/environment-friendly cationic gemini surfactant, ethane-1,2-diyl bis(N,N-dimethyl-N-hexadecylammoniumacetoxy)dichloride, referred to as 16-E2-16, was synthesized and characterized. Corrosion inhibition effects of 16-E2-16 on mild steel (MS) surface in 1 M HCl solution at 30, 40, 50 and 60 °C were evaluated using gravimetric analysis, potentiodynamic polarisation and electrochemical impedance spectroscopy measurements. The nature of the protective inhibitor film formed on the MS surface was analysed by SEM, EDAX and FT-IR, while TGA was used to assure the thermal behaviour and stability of the film at high temperature. The formation of [inhibitor-Fe²⁺] on the surface of MS was confirmed by UV–visible spectroscopy. The inhibition efficiency of the studied inhibitor increased with increasing concentration and solution temperature. The compound behaved as a mixed type inhibitor and acted by blocking the electrode surface by means of adsorption obeying the Langmuir adsorption isotherm. Surface active properties and corrosion inhibition effects of 16-E2-16 in the presence of inorganic (NaI) and organic (NaSal) salts were also investigated and are discussed. Density functional theory calculations have been carried out to correlate the efficiency of the compound with its intrinsic molecular parameters.     

Reinforcement effect of poly (methyl methacrylate)-<Emphasis Type="Italic">g</Emphasis>-cellulose nanofibers on LDPE/thermoplastic starch composites: preparation and characterization

The effect of cellulose nanofibers (CNFs) and poly [methyl methacrylate (MMA)]-grafted cellulose nanofibers (CNF-g-PMMA) on mechanical properties and degradability of a 75/25 low density polyethylene/thermoplastic starch (LDPE/TPS) blend was investigated. Graft copolymerization on CNFs was performed in an aqueous suspension by free radical polymerization using MMA as an acrylic monomer. In addition, a LDPE/TPS blend was reinforced by different amounts of CNFs (1–5 wt%) and CNF-g-PMMA (1–7 wt%) using a twin-screw extruder. A 61% grafting of PMMA on the surface of CNFs was demonstrated by gravimetric analysis. Moreover, after modification the X-ray photoelectron spectroscopy analysis showed a 20% increase of carbon atoms on the surface of CNFs and a 22.6% decrease in the oxygen content of its surface. The mechanical properties of the CNFs-modified composites were significantly improved compared to the unmodified nanocomposites. The highest tensile strength and Young’s modulus were obtained for the composites reinforced by 3 and 7 wt% CNF-g-PMMA, respectively. The degradability of cellulose nanocomposites was studied by water absorption and soil burial tests. Surface modification of CNFs lowered water absorption, and soil burial test of the LDPE/TPS blend showed improvement in biodegradability by addition of CNF-g-PMMA.     

Synthesis and Characterization of pH-Responsive Organic–Inorganic Hybrid Material with Excellent Catalytic Activity

Poly(N-isopropylmethacrylamide-co-methacrylic acid) [p(NipAam-Mac)] microgels were synthesized and used as microreactors to fabricate silver nanoparticles. Pure and hybrid microgels were characterized using Ultraviolet–Visible (UV/Vis) spectroscopy, Fourier transform infra-red (FTIR) spectroscopy and transmission electron microscopy (TEM). Catalytic activity of hybrid microgels and mechanism of catalysis by this system was explored using different reaction conditions. At the same temperature, apparent rate constant (k_app) was found to be varied from 0.0414 to 0.7852 min^?1 by increasing the concentration of NaBH₄ from 2.49 to 22.41 mM at constant concentration of substrate and catalyst. However upon extra increase in concentration of NaBH₄ from 22.41 to 37.35 mM reduced the value of k_app to 0.2178 min^?1. Likewise, the value of k_app was found to be increased from 0.1242 to 0.5495 min^?1 with increasing the concentration of 4-nitrophenol [Para-nitrophenol (p-Np)] from 0.063 to 0.079 mM keeping other parameters constant. Further increase in concentration of p-Np caused decline in the value of k_app. Kinetic data reveals that catalytic reduction of p-Np obeys Langmuir–Hinshelwood mechanism and p-Np is converted to p-Ap on the surface of the silver nanoparticles passing through various reaction intermediates.     

Novel Ester-linked Anionic Gemini Surfactant: Synthesis,Surface-Active Properties and Antimicrobial Study

A novel anionic gemini surfactant containing an ester bond in the spacer group was synthesized using cardanol as the raw material and characterized by IR, ¹H NMR and ¹³C NMR. The surface properties of the gemini surfactant were investigated and compared with its corresponding single chain surfactant counterpart. It was found that this novel gemini surfactant exhibited a low critical micelle concentration value (1.9 mM) and good efficiency in reducing surface tension of water (33.6 mN/m). The gemini surfactant was found to have antimicrobial activity against Gram-negative (Escherichia coli and Pseudomonas aeruginosa), Gram-positive (Bacillus subtilis and Staphylococcus aureus) bacteria and fungi (Aspergillus niger, Aspergillus flavus, Candida albicans and Rhizopus stolonifer). The gemini as well as the corresponding single chain surfactant showed good antimicrobial activity against all pathogenic microorganisms studied and can be employed as an antimicrobial agent. The synthesized novel anionic gemini surfactant possesses an excellent wettability and low foamability.     

Improvement of bacterial cellulose production in <Emphasis Type="Italic">Acetobacter xylinum</Emphasis> using byproduct produced by <Emphasis Type="Italic">Gluconacetobacter hansenii</Emphasis>

A single sugar α-linked glucuronic acid based oligosaccharide (SSGO) is water soluble oligosaccharides (WSOS) obtained by Gluconacetobacter hansenii PJK (KCTC 10505BP) as a byproduct during bacterial cellulose (BC) production. In this study, SSGO was used for the improvement of BC production by the vinegar bacterium, Acetobacter xylinum, which produces heteropolysaccharides as a byproduct. The addition of 1.0% SSGO to the chemically defined medium (CDM) resulted in an 89.3% increase in BC production by A. xylinum after 15 days of cultivation under static condition, and a 52.3% increase in BC production by G. hansenii. Both the dry cell weight and live cell density of A. xylinum increased 50% with the addition of 1.0% SSGO. SSGO successfully improved BC production by A. xylinum.     

Modulating the Aggregation Behavior of 1-Methyl-3-Octylimidazolium Chloride by Alcohols in Aqueous Media

The self-organization and aggregation behavior of a surface active ionic liquid (SAIL) 1-methyl-3-octylimidazolium chloride [C₈mim]Cl, was investigated in aqueous solutions of alcohols 1,2-propanediol and 1-propanol in different compositions using conductivity, surface tension and fluorescence measurements at room temperature. This surface active ionic liquid was synthesized by the reaction of 1-methylimidazole with 1-chlorooctane. Fluorescence spectroscopy was employed to get detailed insight into the local microenvironment of the aggregates, critical aggregation concentrations (CAC) and aggregation number (N _agg.). Degree of ionization (α), CAC and various thermodynamic parameters like the standard Gibbs free energy of aggregation (ΔG _agg. ⁰ ), standard enthalpy of aggregation (ΔH _agg. ⁰ ) and standard entropy of aggregation (ΔS _agg. ⁰ ) were calculated using conductivity measurements at different temperatures (288.15, 298.15 and 308.15 K). The surface activity of the IL in various mixed solvents was evaluated from surface tension measurements by calculating various surface parameters like the minimum surface area occupied by a single ionic liquid molecule (A _min), adsorption efficiency (pC ₂₀), maximum excess concentration at the surface (Γ _max), effectiveness of surface tension reduction(Π _CAC), surface tension at CAC (γ _CAC), p (packing parameter) and CAC at different compositions. Increases in the CAC values were observed with the increase in the amount of alcohols which is attributed to the balancing between electrostatic and hydrophobic interactions. The results from different techniques show that the CAC increases with increase in the amount of the alcohol which is due to the solubilization of the IL molecules which delays the aggregation process. This shows that the spontaneity of the aggregation process of IL decreases with the increase in the concentration of alcohols in water.     

FTIR spectra and elastic properties of Cd-substituted Ni–Zn ferrites

Solid solutions Ni_0.5–x Cd _x Zn_0.5Fe₂O₄ (x = 0, 0.15, 0.30) were prepared by solid-state synthesis and characterized by FTIR spectroscopy. The FTIR spectra of synthesized ferrites showed two absorption bands (ν₁ and ν₂) in the range 400–600 cm^–1 belonging to tetrahedral (A) and octahedral (B) interstitial sites in the spinel lattice. The force constants for tetrahedral (K _t) and octahedral sites (K _o) were determined, as well as Young’s modulus (E), rigidity modulus (G), bulk modulus (B), Debye temperature (Θ_D), and velocity of transverse (V _t) and longitudinal (V _l) elastic waves. The relevant interionic cation–anion, cation–cation distances and bond angles are also reported.     

Effect of the Molecular Structure on the Adsorption Properties of Cationic Surfactants at the Air–Water Interface

The surface activity and thermodynamic properties of adsorption at the air–water interface of two series of cationic surfactants based on isourea: the O-dodecyl-N,N′-diisopropylisourea hydrochloride, hydrobromide, and hydroiodide and the O-tridecafluorooctyl-N,N′-diisopropylisourea hydrochloride and hydrobromide were studied. The effect of structural parameters as the nature of the halide counter ion and the nature of the non-polar chain on the surface activity and thermodynamic properties of adsorption were investigated. The surface parameters, the maximum surface excess concentration (Γ _max), the minimum area per molecule (A _min) at the aqueous solution-air interface, effectiveness of surface tension reduction (π_CMC), and efficiency of surface tension reduction (pC ₂₀) were estimated. The standard Gibbs free energy of adsorption, (ΔG°_ads) change has been calculated at different temperatures.     

<Emphasis Type="Italic">n</Emphasis>-Pentacosane Acts as both Contact and Volatile Pheromone in the tea Weevil, <Emphasis Type="Italic">Myllocerinus aurolineatus</Emphasis>

Insect cuticular hydrocarbons (CHCs) play important roles in chemical communication, as well as having ecological and physiological roles. The use of CHCs for mate recognition has been shown in many insect genera, but little is known about their use in the tea weevil Myllocerinus aurolineatus. Here, we provide evidence that CHCs on the surface of sexually mature M. aurolineatus females act as contact sex pheromones, facilitating mate recognition and eliciting copulatory behavior in male weevils. Using gas chromatography-mass spectrometry, we identify n-pentacosane and n-heptacosane as two potential contact pheromone components. Results from arena bioassays showed that n-pentacosane is a component of a contact pheromone of M. aurolineatus. Further results from the Y-tube olfactometer bioassays showed that n-pentacosane also acts as a volatile attractant. Our results greatly improve our understanding of the chemical ecology of M. aurolineatus.     

Synthesis and characterization of exfoliated polystyrene grafted hexagonal boron nitride nanosheets and their potential application in heat transfer nanofluids

Three different methods were used to develop surface-modified hexagonal boron nitride (h-BN) nanosheets, and polystyrene grafting was performed by an indirect covalent bond formation between modified h-BN nanosheets and styrene molecules through surface initiated atom transfer radical polymerization (SI-ATRP) approach. In all methods, an alkyl bromide as the ATRP-initiating site was first introduced on h-BN nanosheets and an SI-ATRP reaction of styrene from the initiator immobilized h-BN surface was achieved. The structure of synthesized PS grafted h-BN nanosheets (PS-g-h-BN) was identified and characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, field emission scanning electron microscopy, transmission electron microscopy, and atomic force microscopy methods. The functionalization promoted the exfoliation of h-BN layered structure into few layer sheets where the thickness of the sheets was dependent on the modification technique and the content of polymer grafted on nanosheets. The highest grafting content of PS-g-h-BN nanosheets was obtained around 20% which could enhance thermal conductivity of mineral oil-based nanofluids with the minimum concentration of the nanofiller (0.01 wt%). The electrical and physical properties of the nanofluid were also investigated. According to the results, the dielectric loss reduced by increase in nanofiller concentration was an indication of the enhanced dielectric nature of nanofluid. In addition, exfoliated PS-g-h-BN nanosheets dispersions were shown to be stable in mineral oil up to 2 months and this stability was linked to the presence of polymer chains followed by the formation of van der Walls interactions between the grafted polymer and the fluid.     

Raman spectra and surface structure of CaO-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-SiO<Subscript>2</Subscript> glass leached in potassium hydroxide solutions

It is difficult to research on the surface structure of amorphous phase in fly ash during leaching reaction due to crystalline phase and complex structure. In the present work, in order to reveal the effects of leaching reaction on the surface structure of amorphous phase in fly ash, the modelling CaO-Fe₂O₃-Al₂O₃-SiO₂ glass was prepared by the traditional melting methods. The leaching reaction of CaO-Fe₂O₃-Al₂O₃-SiO₂ glass with 7.5 M KOH was investigated by spectroscopy, spectrophotometer and wet chemical method. The results show that the content of Q ¹, Q ², Q ³ and Q ⁴ of glass without corrosion was 4.21, 9.51, 23.03 and 52.55%, respectively, which shows that the network polymerization of glass is compact. The leaching reaction of glass can be described by the following equation: dS/dt = k/(r + S ₀). Leaching in KOH for various times induces the content of Q ⁴ and Q ¹ to be decreased, and Q ² and Q ³ increased, resulted in the depolymerization of network and the surface glass dissolved in alkaline solution to form a gel phase. In stage one of leaching reaction, the rate of iron ion leached from glass surface was slow, which resulted in the small slope of straight-line relationship of leaching curve. In the following stage, the leaching rate of iron ion increased with the prolongation of time.     

A Comprehensive Study on the Synthesis and Micellization of Disymmetric Gemini Imidazolium Surfactants

Two groups of disymmetric Gemini imidazolium surfactants, [C₁₄C₄C _m im]Br₂ (m = 10, 12, 14) and [C _m C₄C _n im]Br₂ (m + n = 24, m = 12, 14, 16, 18) surfactants, were synthesized and their structures were confirmed by ¹H NMR and ESI–MS spectroscopy. Their adsorption at the air/water interface, thermodynamic parameters and aggregation behavior were explored by means of surface tension, electrical conductivity and steady-state fluorescence. A series of surface activity parameters, including cmc, γ _cmc, π _cmc, pC ₂₀, cmc/C ₂₀, Γ _max and A _min, were obtained from surface tension measurements. The results revealed that the overall hydrophobic chain length (N _c) for [C₁₄C₄C _m im]Br₂ and the disymmetry (m/n) for [C _m C₄C _n im]Br₂ had a significant effect on the surface activity. The cmc values decreased with an increase of N _c or m/n. The thermodynamic parameters of micellization (ΔG _m ^θ , ΔH _m ^θ , ΔS _m ^θ ) derived from the electrical conductivity indicated that the micellization process of [C₁₄C₄C _m im]Br₂ and [C _m C₄C _n im]Br₂ was entropy-driven at different temperatures, but the contribution of ΔH _m ^θ to ΔG _m ^θ was enhanced by increasing N _c or m/n. The micropolarity and micellar aggregation number (N _agg) were estimated by steady-state fluorescence measurements. The results showed that the surfactant with higher N _c or m/n can form larger micelles, due to a tighter micellar structure.     

IR Spectroscopy in Rank and Group Assignment of Coal

The possibility of express determination of the characteristics V _IR ^daf , R_{o, IR}, y_IR, ΣLC_IR, and A _IR ^d used in the ranking of coal on the basis of IR spectroscopy is assessed for a specific example: Kuznetsk coals of different maceral composition and metamorphic development. The IR characteristics are compared with values obtained by standard methods (V^daf, R_{o, r, y}, ΣLC, and A^d).     

Surface-initiated growth of copper using isonicotinic acid-functionalized aluminum oxide surfaces

Isonicotinate self-assembled monolayers (SAM) were prepared on alumina surfaces (A) using isonicotinic acid (iNA). These functionalized layers (iNA-A) were used for the seeded growth of copper films (Cu-iNA-A) by hydrazine hydrate-initiated electroless deposition. The films were characterized by scanning electron microscopy (SEM), electron-dispersive X-ray spectroscopy, atomic force microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, and advancing contact angle measurements. The films are Cu⁰ but with surface oxidation, and show a faceted morphology, which is more textured (R _q = 460 ± 90 nm) compared to the SAM (R _q = 2.8 ± 0.5 nm). In contrast, growth of copper films by SnCl₂/PdCl₂ catalyzed electroless deposition, using formaldehyde (CH₂O) as the reducing agent, shows a nodular morphology on top of a relatively smooth surface. No copper films are observed in the absence of the isonicotinate SAM. The binding of Cu²⁺ to the iNA is proposed to facilitate reduction to Cu⁰ and create the seed for subsequent growth. The films show good adhesion to the functionalized surface.     

Novel polySchiff base containing naphthyl: synthesis,characterization, optical properties and surface morphology

In the present work, a Schiff base was obtained from reaction of 1-naphthylamine with salicylaldehyde and its polymer (poly(NIMP)) was synthesized via oxidative polycondensation. The characterizations of the synthesized Schiff base and poly(NIMP) were determined by ¹H NMR, ¹³C NMR, FT-IR, GPC and TGA techniques. The film of synthesized poly(NIMP) was prepared. The film thickness was found to be 106 μm. The optical band gap (E_g) values of the film were determined by UV-vis spectroscopy. Direct, indirect and forbidden indirect band gap (E_gd, E_gid and E_gfid) values of the film were found as 1.698, 1.223 and 1.461 eV, respectively. Surface properties of the film were investigated by Atomic force microscope (AFM). In the AFM results, the average surface roughness and average square root roughness were obtained as 2.46 and 3.79 nm, respectively. A negative skewness value exhibited dominant valleys while the high kurtosis value exhibited spiky features.     

Effect of epoxidized soybean oil grafted poly(12-hydroxy stearate) on mechanical and thermal properties of microcrystalline cellulose fibers/polypropylene composites

A new green compatibilizer named epoxidized soybean oil grafted poly(12-hydroxy stearate) (ESO-g-PHS) was successfully synthesized using 12-hydroxy stearic acid and epoxidized soybean oil (ESO). The chemical structure of ESO-g-PHS was investigated through Fourier transformed infrared spectroscopy, thermogravimetric analysis, and gel permeation chromatography. ESO-g-PHS was used as a compatibilizer to enhance the interfacial compatibility between polypropylene (PP) and microcrystalline cellulose fibers (MCF). The results showed that the impact strength and tensile strength were 33.55 and 27.57 MPa when the content loading of MCF reached 10 wt% and ESO-g-PHS was 4 wt%, which enhanced by 75.4 and 30.04 %, respectively, compared to that of composites without ESO-g-PHS. In addition, the SEM images of the fracture surfaces display that PP was highly bonded to MCF with ESO-g-PHS treated. In addition, the wide angle X-ray diffraction measurement revealed that the addition of ESO-g-PHS did not change the crystal structure of PP. Moreover, there was a slight improvement in thermal properties for PP composites with the addition of ESO-g-PHS.     

Electrospun Micro/Nanofibers as Controlled Release Systems for Pheromones of <Emphasis Type="Italic">Bactrocera oleae</Emphasis> and <Emphasis Type="Italic">Prays oleae</Emphasis>

New systems for the controlled release of 1,7-dioxaspiro[5.5]undecane and (Z)-7-tetradecenal, the sex pheromones of olive fruit fly, Bactrocera oleae, and olive moth, Prays oleae, respectively, were developed utilizing electrospun micro/nanofiber matrices from inexpensive, biodegradable polymers, namely polycaprolactone, cellulose acetate and polyhydroxybutyrate. The incorporation of the pheromones in 5, 10 and 20% w/w in the electrospinning polymer blends allowed for the production of fiber mats with variable loading levels and release rates, ensuring however in all cases the release of pheromones for more than 16 weeks. Laboratory bioassays and field trapping tests showed that the fiber mats obtained from electrospinning of polyhydroxybutyrate solution containing 5% w/w 1,7-dioxaspiro[5.5]undecane and polycaprolactone solution containing 5% w/w (Z)-7-tetradecenal were almost twice as effective in attracting B. oleae and P. oleae males, respectively, in comparison to the positive controls used.     

Phytofabrication,Characterization and Antibacterial Activity of <Emphasis Type="Italic">Cassia auriculata</Emphasis> Leaf Extract Derived CuO Nanoparticles

A simple, eco-friendly phytosynthesis of copper oxide nanoparticles (CuO NPs) using Cassia auriculata leaf extract was reported. The prepared CuO NPs was characterized by UV–vis spectroscopy which exhibited the surface plasmon resonance (SPR) band at 380–385 nm. TEM and EDX analysis confirmed that CuO NPs were spherical and in size range of 30–35 nm with identified elements Cu and O. X-ray diffraction (XRD) spectrum showed the crystalline nature of the prepared CuO NPs. FTIR spectrum confirmed the presence of Cu–O functional groups. CuO NPs showed significant antibacterial efficacy against all the tested bacterial strains, i.e., Bacillus subtilis, Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa. CuO NPs showed strong antibacterial action against B. subtilis and E. coli than P. aeruginosa and S. aureus. The results of this study revealed that C. auriculata leaf extract was found to be an effective bio-reducing agent for CuO NPs synthesis and also the antibacterial efficacy of phytofabricated CuO may be useful for its applications in medical and textile industries.     

Alkali-thermal gasification and hydrogen generation potential of biomass

Generating hydrogen gas from biomass is one approach to lowering dependencies on fossil fuels for energy and chemical feedstock, as well as reducing greenhouse gas emissions. Using both equilibrium simulations and batch experiments with NaOH as a model alkaline, this study established the technical feasibility of converting various biomasses (e.g., glucose, cellulose, xylan and lignin) into H₂-rich gas via catalyst-free, alkalithermal gasification at moderate temperatures (as low as 300 °C). This process could produce more H₂ with less carbon-containing gases in the product than other comparable methods. It was shown that alkali-thermal gasification follows C _x H _y O _z + 2xNaOH + (x–z)H₂O = (2x + y/2–z)H₂ + xNa₂CO₃, with carbonate being the solid product which is different from the one suggested in the literature. Moreover, the concept of hydrogen generation potential (H₂-GP)—the maximum amount of H₂ that a biomass can yield, was introduced. For a given biomass C _x H _y O _z , the H₂-GP would be (2x + y/2–z) moles of H₂. It was demonstrated experimentally that the H2-GP was achievable by adjusting the amounts of H₂O and NaOH, temperature and pressure.

Open image in new window

     

Itaconic Acid Based Surfactants: I. Synthesis and Characterization of Sodium <Emphasis Type="Italic">n</Emphasis>-Octyl Sulfoitaconate Diester Anionic Surfactant

A novel itaconate-based surfactant, namely sodium n-octyl sulfoitaconate diester (SOSID), has been synthesized from itaconic acid (IA) and n-octanol by sulfonation and esterification reaction processes. The effects of reaction temperature, reaction time, molar ratios of n-octanol to IA and the catalyst dosage on the esterification were investigated. The chemical structure of the surfactants SOSID was characterized by means of LC–MS and confirmed by FT-IR and ¹H NMR spectroscopy. The surface tension γ and the critical micelle concentration (CMC) were determined as 25.02 mN/m and 4.0 × 10^?4 mol/L by using surface tensiometer at 20 °C. Further investigations showed that SOSID possess excellent wetting, emulsifying and lime soap dispersing properties.