输入增益未知非参数不确定系统的准最优学习控制

为解决一类非参数不确定系统在任意初态且输入增益未知情形下的轨迹跟踪问题, 提出准最优误差跟踪学习控制方法.该方法综合准最优控制和迭代学习控制两种技术设计控制器, 在构造期望误差轨迹的基础上, 根据控制Lyapunov函数及Sontag公式给出标称系统的优化控制, 以鲁棒方法和学习方法相结合的策略处理非参数不确定性.闭环系统经过足够次迭代运行后, 经由实现系统误差对期望误差轨迹在整个作业区间上的精确跟踪, 获得系统状态对参考信号在预设的部分作业区间上的精确跟踪.仿真结果表明所设计学习系统在收敛速度方面快于非优化设计.     

A sliding mode control and artificial neural network based MPPT for a direct grid‐connected photovoltaic source

A robust sliding mode controller for a grid‐connected photovoltaic source is proposed in this paper. The objective of the presented control scheme is to force both the output voltage of the photovoltaic PV source and the power factor at the inverter output to follow a certain trajectory reference. The main idea is to apply the robust sliding mode controller directly to the nonlinear state model of the system composed of the PV source and the inverter with its input and output filters. In order to operate the PV system at the maximum power point and to satisfy the environmental factors, such as solar irradiance and temperature, we included a rigorous maximum power point tracker based on an artificial neural network. Simulation results are presented to illustrate the performance of the proposed control scheme. In addition, we show that the grid current satisfies the harmonic limits of the IEEE standard for interconnecting distributed energy sources with electric power systems.     

一种间歇过程的综合预测迭代学习控制方法

为了提高迭代学习控制方法在间歇过程轨迹跟踪问题中的收敛速度,本文将批次间的比例型迭代学习控制与批次内的模型预测控制相结合,提出了一种综合应用方法.首先根据间歇过程的线性模型,预测出比例型迭代学习控制的系统输出,然后在批次内采用模型预测控制,通过极小化一个二次型目标函数来获得控制增量.该方法可使系统输出跟踪期望轨迹的速度比比例型迭代学习控制方法更快些.最后通过仿真实例验证了该方法的有效性.     

A non-standard iterative learning control approach to tracking periodic signals in discrete-time non-linear systems

In this paper we use the formalism of iterative learning control (ILC) to solve the repetitive control problem of forcing a system to track a prescribed periodic reference signal. Although the systems we consider operate continuously in time, rather than with trials that have distinct starting and ending times, we use the ILC approach by defining a 'trial' in terms of completion of a single 'period' of the output trajectory, where a period is an interval from the start of the trial until the system returns to its initial state. The ILC scheme we develop does not use the standard assumption of uniform trial length. In the final result the periodic motion is achieved by 'repetition' of the learned ILC input signal for a single period. Analysis of the convergence of the algorithm uses an intermediate convergence result for the typical ILC problem. This intermediate result is based on a multi-loop control interpretation of the signal flow in ILC. The idea is demonstrated on an example and it is noted that it may be possible to generalize the ideas to broader classes of systems and ILC algorithms.     

Iterative learning control design with high‐order internal model for discrete‐time nonlinear systems

In this paper, a high‐order internal model (HOIM)‐based iterative learning control (ILC) scheme is proposed for discrete‐time nonlinear systems to tackle the tracking problem under iteration‐varying desired trajectories. By incorporating the HOIM that is utilized to describe the variation of desired trajectories in the iteration domain into the ILC design, it is shown that the system output can converge to the desired trajectory along the iteration axis within arbitrarily small error. Furthermore, the learning property in the presence of state disturbances and output noise is discussed under HOIM‐based ILC with an integrator in the iteration axis. Two simulation examples are given to demonstrate the effectiveness of the proposed control method. Copyright © 2016 John Wiley & Sons, Ltd.     

间歇过程最优迭代学习控制的发展:从基于模型到数据驱动

本文综述了间歇过程的基于模型的和数据驱动的最优迭代学习控制方法.基于模型的最优迭代学习控制方法需要已知被控对象精确的线性模型,其研究较为成熟和完善,有着系统的设计方法和分析工具.数据驱动的最优迭代学习控制系统设计和分析的关键是非线性重复系统的迭代动态线性化.本文简要综述了基于模型的最优迭代学习控制的研究进展,详细回顾了数据驱动的迭代动态线性化方法,包括其详细的推导过程和突出的特点.回顾和讨论了广义的数据驱动最优迭代学习控制方法,包括完整轨迹跟踪的数据驱动最优迭代学习控制方法,提出和讨论了多中间点跟踪的数据驱动最优点到点迭代学习控制方法,和终端输出跟踪的数据驱动最优终端迭代学习控制方法.进一步,迭代学习控制研究中的关键问题,如随机迭代变化初始条件、迭代变化参考轨迹、输入输出约束、高阶学习控制律、计算复杂性等.本文突出强调了基于模型的和数据驱动的最优迭代学习控制方法各自的特点与区别联系,以方便读者理解.最后,本文提出数据驱动的迭代学习控制方法已成为越来越复杂间歇过程控制发展的未来方向,一些开放的具有挑战性的问题还有待于进一步研究.     

Observer-based Iterative and Repetitive Learning Control for a Class of Nonlinear Systems

In this paper, both output-feedback iterative learning control (ILC) and repetitive learning control (RLC) schemes are proposed for trajectory tracking of nonlinear systems with state-dependent time-varying uncertainties. An iterative learning controller, together with a state observer and a fully-saturated learning mechanism, through Lyapunov-like synthesis, is designed to deal with time-varying parametric uncertainties. The estimations for outputs, instead of system outputs themselves, are applied to form the error equation, which helps to establish convergence of the system outputs to the desired ones. This method is then extended to repetitive learning controller design. The boundedness of all the signals in the closed-loop is guaranteed and asymptotic convergence of both the state estimation error and the tracking error is established in both cases of ILC and RLC. Numerical results are presented to verify the effectiveness of the proposed methods.      

Kinematic path‐tracking of mobile robot using iterative learning control

This paper develops a kinematic path‐tracking algorithm for a nonholonomic mobile robot using an iterative learning control (ILC) technique. The proposed algorithm produces a robot velocity command, which is to be executed by the proper dynamic controller of the robot. The difference between the velocity command and the actual velocity acts as state disturbances in the kinematic model of the mobile robot. Given the kinematic model with state disturbances, we present an ILC‐based path‐tracking algorithm. An iterative learning rule with both predictive and current learning terms is used to overcome uncertainties and the disturbances in the system. It shows that the system states, outputs, and control inputs are guaranteed to converge to the desired trajectories with or without state disturbances, output disturbances, or initial state errors. Simulations and experiments using an actual mobile robot verify the feasibility and validity of the proposed learning algorithm. © 2005 Wiley Periodicals, Inc.     

Robust design of feedback feed-forward iterative learning control based on 2D system theory for linear uncertain systems

For a class of linear discrete-time uncertain systems, a feedback feed-forward iterative learning control (ILC) scheme is proposed, which is comprised of an iterative learning controller and two current iteration feedback controllers. The iterative learning controller is used to improve the performance along the iteration direction and the feedback controllers are used to improve the performance along the time direction. First of all, the uncertain feedback feed-forward ILC system is presented by an uncertain two-dimensional Roesser model system. Then, two robust control schemes are proposed. One can ensure that the feedback feed-forward ILC system is bounded-input bounded-output stable along time direction, and the other can ensure that the feedback feed-forward ILC system is asymptotically stable along time direction. Both schemes can guarantee the system is robust monotonically convergent along the iteration direction. Third, the robust convergent sufficient conditions are given, which contains a linear matrix inequality (LMI). Moreover, the LMI can be used to determine the gain matrix of the feedback feed-forward iterative learning controller. Finally, the simulation results are presented to demonstrate the effectiveness of the proposed schemes.     

Improved D‐Type Anticipatory Iterative Learning Control for a Class of Inhomogeneous Heat Equations

This paper aims at providing a practical iterative learning control (ILC) scheme for a wide class of heat transfer systems in the sense that it avoids high‐gain learning of ILC, thus a potential non‐monotonic convergence issue, and the risk of violating the hardware limitation of input profile in implementation. Meanwhile, the ILC scheme guarantees the identical initial condition of heat process. As a result, the output tracking precision may be improved while not reducing the anticipatory step size as in 1 . All the benefits of the proposed ILC scheme are achieved by applying a heuristic selection algorithm for the anticipatory step size and rectifying the output reference simultaneously.     

IMC-based iterative learning control for batch processes with uncertain time delay

Based on the internal model control (IMC) structure, an iterative learning control (ILC) scheme is proposed for batch processes with model uncertainties including time delay mismatch. An important merit is that the IMC design for the initial run of the proposed control scheme is independent of the subsequent ILC for realization of perfect tracking. Sufficient conditions to guarantee the convergence of ILC are derived. To facilitate the controller design, a unified controller form is proposed for implementation of both IMC and ILC in the proposed control scheme. Robust tuning constraints of the unified controller are derived in terms of the process uncertainties described in a multiplicative form. To deal with process uncertainties, the unified controller can be monotonically tuned to meet the compromise between tracking performance and control system robust stability. Illustrative examples from the recent literature are performed to demonstrate the effectiveness and merits of the proposed control scheme.     

Novel bacterial foraging-based ANFIS for speed control of matrix converter-fed industrial BLDC motors operated under low speed and high torque

In this paper, a novel adaptive neuro-fuzzy inference system (ANFIS)-based control technique optimized by Bacterial Foraging Optimization Algorithm for speed control of matrix converter (MC)-fed brushless direct current (BLDC) motor is presented. ANFIS is considered to be one of the most promising technologies for control of electrical drives fed by MC. Optimizing the training parameters of ANFIS, to improve its performance, is still being considered by several researchers recently. Parameters of the online ANFIS controller such as learning rate (η), forgetting factor (λ) and steepest descent momentum constant (α) are optimized by using the proposed algorithm. For the purpose of comparison, proportional integral derivative controller, fuzzy logic controller, PSO-ANFIS and BAT-ANFIS are considered. Set point tracking performances of the proposed system are carried out at various operating points for an industrial BLDC motor operating at a maximum rated speed of 380 rpm and torque of 6.4 N m. Time domain specifications such as rise time, settling time, peak time, steady-state error and peak overshoot in the presence and absence of load torque disturbances are presented. Time integral performance measures such as integral square error, integral absolute error, and integral time multiplied absolute error are analyzed for various operating conditions. Speed fluctuation in the output of BLDC motor is dependent on the source current harmonics of the inverter/converter. To illustrate this, total harmonic distortion (THD) analysis is carried out for the existing PWM inverter and the proposed MC, and it is proved that MC results in reduced THD, as compared to PWM inverter. Simulation results confirm that the proposed controller outperforms the other existing control techniques under various set speed and torque conditions. Statistical analysis is effectively carried out to prove the effectiveness of the proposed controller. Experimental analysis is performed to validate the performance of the proposed control scheme.

     

Output‐Feedback Nonlinear Adaptive Control of Single‐Phase Half‐Bridge Ups Systems

We consider the problem of controlling single‐phase half‐bridge power converters in UPS systems operating in the presence of changing load. The control objective is twofold: (i) ensuring a satisfactory power factor correction (PFC) at the grid–UPS connection; (ii) guaranteeing a tight regulation of the DC bus voltage and the half‐bridge inverter output voltage despite changes in load. The considered control problem entails several difficulties including: (i) the high dimension and strong nonlinearity of the system; (ii) the numerous state variables that are inaccessible to measurements; (iii) the uncertainty that prevails on some system parameters. The problem is dealt with using a multi‐loop nonlinear adaptive control system that makes use of the backstepping design technique. The inner loop ensures the PFC objective and involves an adaptive observer estimating the grid voltage and impedance parameters. The intermediary loop regulates the inverter output voltage to its reference, which is a sinusoidal wave, and it also contains an observer estimating the current in the inverter coil. The outer loop regulates the DC bus voltage up to small size ripples. The controller performances are formally analyzed using system averaging theory.     

基于强化迭代学习的四旋翼无人机轨迹控制

为进一步提升在未知环境下四旋翼无人机轨迹的跟踪精度,提出了一种在传统反馈控制架构上增加迭代学习前馈控制器的控制方法。针对迭代学习控制（ILC）中存在的学习参数整定困难的问题,提出了一种利用强化学习（RL）对迭代学习控制器的学习参数进行整定优化的方法。首先,利用RL对迭代学习控制器的学习参数进行优化,筛选出当前环境及任务下最优的学习参数以保证迭代学习控制器的控制效果最优;其次,利用迭代学习控制器的学习能力不断迭代优化前馈输入,直至实现完美跟踪;最后,在有随机噪声存在的仿真环境中把所提出的强化迭代学习控制（RL-ILC）算法与未经参数优化的ILC方法、滑模变结构控制（SMC）方法以及比例-积分-微分（PID）控制方法进行对比实验。实验结果表明,所提算法在经过2次迭代后,总误差缩减为初始误差的0.2%,实现了快速收敛;并且与SMC控制方法及PID控制方法相比,RL-ILC算法在算法收敛后不会受噪声影响产生轨迹波动。由此可见,所提算法能够有效提高无人机轨迹跟踪的准确性和鲁棒性。     

Adaptive iterative learning control for robot manipulators

In this paper, we propose some adaptive iterative learning control (ILC) schemes for trajectory tracking of rigid robot manipulators, with unknown parameters, performing repetitive tasks. The proposed control schemes are based upon the use of a proportional-derivative (PD) feedback structure, for which an iterative term is added to cope with the unknown parameters and disturbances. The control design is very simple in the sense that the only requirement on the PD and learning gains is the positive definiteness condition and the bounds of the robot parameters are not needed. In contrast to classical ILC schemes where the number of iterative variables is generally equal to the number of control inputs, the second controller proposed in this paper uses just two iterative variables, which is an interesting fact from a practical point of view since it contributes considerably to memory space saving in real-time implementations. We also show that it is possible to use a single iterative variable in the control scheme if some bounds of the system parameters are known. Furthermore, the resetting condition is relaxed to a certain extent for a certain class of reference trajectories. Finally, simulation results are provided to illustrate the effectiveness of the proposed controllers.     

参考轨迹更新的点到点迭代学习控制算法优化及应用

针对受非重复扰动作用的离散线性系统的输出跟踪控制问题,提出一种基于参考轨迹更新的点到点迭代学习控制算法.首先通过构建性能指标函数对控制器进行范数优化,并给出相应的收敛性条件,使得系统输出能够跟踪上更新后参考轨迹处的期望点.其次,当系统输出端受到某批次非重复扰动的影响时,进一步通过引入拉格朗日乘子算法构造多目标性能指标函数,以优化鲁棒迭代学习控制器,达到提高收敛速度和跟踪精度的目的.最后将该算法应用于电机驱动的单机械臂控制系统中,仿真结果验证了算法的合理性和有效性.     

Data-based iterative learning control for multiphase batch processes

In order to cope with the problem of the robustness conditions dependence on system parameters information, this paper investigates a data-based iteration learning control (ILC) for multiphase batch processes with different dimensions and system uncertainty. Firstly, by minimizing the residual between the actual subsystem output and the approximated subsystem output, a gradient-type approximation law is designed to approximate the system lower triangular parameters matrix and initial state. Secondly, by minimizing the approximated tracking error between the desired trajectory and the approximated output, a data-based ILC is constructed in an interactive mode with the approximation law. Finally, the boundedness of the approximation error of the real system parameters from the approximated parameters is derived by means of vector norm theory, while the unconditional robustness of the proposed data-based ILC is proved. Simulation results illustrate the effectiveness and practicability of the proposed data-based ILC.     

Iterative Path Tracking of an Omni-Directional Mobile Robot

We propose a path-tracking algorithm that is developed using an iterative learning control (ILC) technique and use the algorithm to control an omni-directional mobile robot. The proposed algorithm can be categorized as an open–closed PD-type ILC; it generates robot velocity commands by a PD-type ILC update rule using both previous and current information. When applied to the omni-directional mobile robot, it can decrease position errors and track the desired trajectory. Under the general problem setting that includes a mobile robot, we show that the proposed algorithm guarantees that the system states, outputs and control inputs converge to within small error bounds around the desired ones even under state disturbances, measurement noises and initial state errors. By using simulation and experimental tests, we demonstrate that the proposed algorithm converges fast to the desired path, and results in small root-mean-square (r.m.s.) position error under various surface conditions. The proposed algorithm shows better path-tracking performance than the conventional PID algorithm and achieves faster convergence and lower r.m.s. error than the existing two ILC algorithms.     

非线性离散时间系统的最优终端迭代学习控制

仅利用系统的终端输出误差而不是整个输出轨迹,提出了一种最优终端迭代学习控制方法.控制信号可直接通过终点的误差信息进行更新.主要创新点在于控制器的设计和分析只利用系统量测的I/O数据而不需要关于系统模型的任何信息,并可实现沿迭代轴的单调收敛.在此意义上,所提出的控制器是数据驱动的无模型控制方法.严格的数学分析和仿真结果均表明了所提出方法的适用性和有效性.