Mg and Al mixed effects on thermal properties in aluminosilicate glasses

By using the aerodynamic levitation and laser melting technique to well extend the glass-forming region into the Mg-rich and peraluminous regime, a series of magnesium aluminosilicate glasses were prepared to investigate the Mg and Al mixed effects on thermal properties, including glass transition temperature (T_g), crystallization behavior, and thermal stability. With the gradual substitution of Mg by Al, T_g exhibits two types of near-linear rises with different slopes in two compositional regions separated by r = 0.57, where r is equal to the molar ratio of [Al₂O₃]/([Al₂O₃] + [MgO]). Moreover, when it comes to other properties, that is, crystallization behavior and thermal stability, this critical point precisely appears at the same r = 0.57. Compared to the slower increase of T_g in Mg-rich region, the steeper rise of T_g in the peraluminous region is mainly ascribed to the step-by-step formation of oxygen triclusters driven by Pauling's second rule. Moreover, the occurrence of the critical point for T_g rise at r = 0.57 rather than the theoretical 0.5 can be seen as a proof of the role of Mg cations partly as a network former.     

Effect of nitrogen on the antibacterial behavior of oxynitride glasses

The main drawback of bioglasses is their restricted use in load bearing applications and the consequent need to develop stronger glassy materials. This has led to the consideration of oxynitride glasses for numerous biomedical applications. This paper investigated two different types of glasses at a constant cationic ratio, with and without nitrogen (a N containing and a N-free glass composition) to better understand the effect of N on the biological properties of glasses. The results revealed that the addition of N increased the glass transition temperature, isoelectric point (IEP) and slightly increased wettability. Moreover, compared to N including glass, N-free glass exhibited better anti-bacterial activity against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus), two key bacteria that infect implants. In summary, these in vitro results indicated that amine functional groups existing in N containing glasses which are missing in N-free glasses, caused a slight difference in wetting behavior and a more obvious change in isoelectric point and in bacterial response. N-free glasses exhibited better inhibitory results both against E. coli and S. aureus compared to N including glass suggesting that oxygen rich glasses should be further studied for their novel antibacterial properties.     

The effect of glass composition on the reactivity of synthetic glasses

The reactivity of synthetic glasses depends on their chemical compositions. In far from equilibrium dissolution experiments, the reactivity of Ca‐rich glasses with compositions similar to blast‐furnace slag is found to be much higher (up to ~60 wt.% after 7 days) compared to Si‐rich glasses with compositions similar to type F fly ash (up to ~20 wt.% after 7 days). Isothermal calorimetry and TGA experiments conducted on model systems containing portlandite and calcite and on glass‐blended Portland cement confirmed the higher reactivity of the Ca‐rich glasses. The degree of glass reaction after 91 days ranged from 7 to 20 wt.%. The results showed also a higher reactivity of the glasses containing more aluminum (both for Ca‐rich and Si‐rich glasses) indicating that not only calcium but also aluminum acted rather as network modifier than as network former. The results confirm a strong dependence of the glass reactivity on the degree of polymerization of the glass network.     

Improving luminescence behavior and glass stability of tellurium-doped germanate glasses by modifying network topology

Broadband near-infrared (NIR) luminescent materials are of great interest for their potential application in optical communication, remote sensing, imaging, and homeland security. Tellurium (Te) doped glasses were recently recognized as such a promising candidate due to their broadband NIR emission (700–1700 nm). However, the achievement of Te-doped glasses with high luminescence efficiency and glass stability (GS) remains a daunting challenge. Here, the luminescence behavior and GS of Te-doped germanate glasses are manipulated by tailoring the glass network topology. Te NIR luminescence is enhanced by tailoring topological cages in germanate glass network structure through varying glass network modifiers. Meanwhile, the GS of potassium germanate glass is significantly enhanced due to increased network connectivity caused by the co-introduction of alkaline earth oxides. Finally, NIR luminescence intensity of the glass was further enhanced by optimizing the doping concentration of TeO₂. The findings here could contribute to designing Te-activated glasses with improved performance for application in optical amplifiers and tunable fiber lasers.     

Analytical model of the network topology and rigidity of calcium aluminosilicate glasses

Topological constraint theory (TCT) has enabled the prediction of various properties of oxide glasses as a function of their composition and structure. However, the robust application of TCT relies on accurate knowledge of the network structure and topology. Here, based on classical molecular dynamics simulations, we derive a fully analytical model describing the topology of the calcium aluminosilicate [(CaO)_x(Al₂O₃)_y(SiO₂)_1−x−y, CAS] ternary system. This model yields the state of rigidity (flexible, isostatic, or stressed-rigid) of CAS systems as a function of composition and temperature. These results reveal the existence of correlations between network topology and glass-forming ability. This study suggests that glass-forming ability is encoded in the network topology of the liquid state rather than that of the glassy state.     

Non-linear, rate-dependent strain-hardening behavior of polymer glasses

This study is concerned with the finite, large strain deformation behavior of polymeric glasses. True stress-strain curves in uniaxial compression obtained for five different polymeric glasses: polycarbonate, polystyrene, poly(2,6-dimethyl-1,4-phenylene oxide), and linear and cross-linked poly(methylmethacrylate), revealed a strain-hardening response during plastic deformation that is strain-rate dependent and deviates from neo-Hookean behavior. An empirical modification of the so-called compressible Leonov model by a strain dependent activation volume is suggested, which describes the strain-rate dependent large strain behavior of these glassy polymers in good agreement with experimental data.     

Transport of potassium ions in niobium phosphate glasses

The influence of Nb₂O₅ on the structure and ionic conductivity of potassium phosphate glasses was investigated in glasses with composition xNb₂O₅–(100-x)[0.45K₂O–0.55P₂O₅], x = 10–47 mol%. The Raman spectra of glasses reveal a transition from predominantly orthophosphate to predominantly niobate glass network with increasing Nb₂O₅ content. In the glass structure, niobium forms NbO₆ octahedra which are interlinked with phosphate units for the glass containing 10 mol% Nb₂O₅, but for higher Nb₂O₅ content they become mutually interconnected via Nb-O-Nb bonds. The transport of potassium ions was found to be strongly dependent on the structural characteristics of the glass network. While the mixed niobate-phosphate glass network hinders the diffusion of potassium ions by providing traps that immobilize them and/or by blocking the conduction pathways, predominantly niobate glass network exhibits a rather facilitating effect which is evidenced in the trend of DC conductivity as well as in the features of the frequency-dependent conductivity and typical hopping lengths of potassium ions.     

Effect of small additions of Li2O on phase separation and crystallization of barium-silicate glasses

It is known that the addition of Li₂O to 33.3BaO-66.7SiO₂ glass, whose composition is the same as BaSi₂O₅, promotes crystallization of BaSi₂O₅. In this study, in order to clarify the effect of a smaller amount of Li₂O, xLi₂O-(30-x)BaO-70SiO₂[mol%] (x = 0, 0.2, 0.5) glasses were prepared. The main crystalline phases in the heat treatments near the maximum crystallization peak temperature, were high-BaSi₂O₅ and low-BaSi₂O₅ which transformed from high-BaSi₂O₅. It is found that the introduction of only 0.2 mol% and 0.5 mol% Li₂O significantly changes the crystallization behavior. In the composition without Li₂O, only high-BaSi₂O₅ was formed after heat treatment even for 24 h. For compositions containing Li₂O, low-BaSi₂O₅ was formed within 1 h of heat treatment. In these compositions, it is found that the addition of Li₂O enhances phase separation in the early stage of heat treatment, resulting in the formation of Si-rich droplet phases and Ba-rich phases. The composition of the Ba rich glass phase would be close to the stoichiometric composition of BaSi₂O₅, suggesting a significant change in crystallization behavior.     

Effect of fluorine and nitrogen content on the properties of Ca-Mg-Si-Al-O-(N)-(F) glasses

X-ray amorphous glasses of composition (in equivalent percent) 15Ca:15Mg: 55Si:15Al:(100-x-y)O:xN:yF with x=0, 10, 15 and y=0, 1, 3, 5, were prepared by melting and casting. The effects of oxygen substitution by fluorine and/or nitrogen on the physical, mechanical, thermal and optical properties of the glasses have been investigated. Molar volume, fractional glass compactness, microhardness, Young's Modulus, glass-transition temperature, dilatometric-softening point and refractive index increased linearly with nitrogen substitution for oxygen, whereas molar volume and thermal expansion coefficient decreased linearly with nitrogen increase. In contrast, all properties except glass-transition temperature and dilatometric-softening point, are virtually unaffected by fluorine substitution for oxygen. Significant and linear, decreases in thermal properties occurred with increasing fluorine substitution level. All the data collected and its analysis clearly showed that the substitution effects of fluorine for oxygen on the studied properties of the glasses of the system with general formula Ca-Mg-Si-Al-O-(N)-(F) are totally independent and additive with respect to the substitution effects of nitrogen for oxygen on glass properties.     

Quantitative prediction of the glass-forming region and luminescence properties in Tm3+-doped germanate laser glasses

Germanate laser glasses have received much attention as a promising host materials for mid-infrared fiber lasers in recent years because of the outstanding infrared transparency, low phonon energy, and high rare earth solubility of such glasses. However, the development of high-performance germanate laser glasses is usually based on intuition and a trial-and-error method, which can involve long experimental periods and high costs, and thus, this approach is highly inefficient. Recently, with proposals for materials genome engineering, the concept of the “glass genome” has grown of interest to us. Herein, the structures of Tm³⁺-doped germanate laser glasses (BaO–GeO₂ and BaO–La₂O₃–GeO₂) were investigated by Fourier transform infrared spectra (FTIR) and Raman spectra analyses, which revealed that the resulting glass contains similar structural groups to the neighboring congruently melted glassy compounds (NCMGCs) in the composition diagram. What is more, the structure and properties of the resulting laser glasses largely depend on NCMGCs. Then, the glass-forming region, physical properties, and luminescence properties were calculated via the use of NCMGCs in Tm³⁺-doped BaO–GeO₂ binary and BaO–La₂O₃–GeO₂ ternary laser glass systems. The calculated results were in good agreement with the experimental results, thus demonstrating that our approach is practical for predicting the glass-forming region, physical properties, and luminescence properties in Tm³⁺-doped BaO–GeO₂ binary and BaO–La₂O₃–GeO₂ ternary laser glass systems. This work may provide an effective method to develop Tm³⁺-doped germanate laser glasses rapidly and at low cost.     

Glass formation, chemical properties and surface analysis of cu-based bulk metallic glasses

This paper reviews the influence of alloying elements Mo, Nb, Ta and Ni on glass formation and corrosion resistance of Cu-based bulk metallic glasses (BMGs). In order to obtain basic knowledge for application to the industry, corrosion resistance of the Cu-Hf-Ti-(Mo, Nb, Ta, Ni) and Cu-Zr-Ag-Al-(Nb) bulk glassy alloy systems in various solutions are reported in this work. Moreover, X-ray photoelectron spectroscopy (XPS) analysis is performed to clarify the surface-related chemical characteristics of the alloy before and after immersion in the solutions; this has lead to a better understanding of the correlation between the surface composition and the corrosion resistance.     

Chemical durability of borosilicate pharmaceutical glasses: Mixed alkaline earth effect with varying [MgO]/[CaO] ratio

Glass for pharmaceutical packaging requires high chemical durability for the safe storage and distribution of newly developed medicines. In borosilicate pharmaceutical glasses which typically contain a mixture of different modifier ions (alkali or alkaline earth), the dependence of the chemical durability on alkaline earth oxide concentrations is not well understood. Here, we have designed a series of borosilicate glasses with systematic substitutions of CaO with MgO while keeping their total concentrations at 13 mol% and a fixed Na₂O concentration of 12.7 mol%. We used these glasses to investigate the influence of R = [MgO]/([MgO] + [CaO]) on the resistance to aqueous corrosion at 80°C for 40 days. It was found that this type of borosilicate glass undergoes both leaching of modifier ions through an ion exchange process and etching of the glass network, leading to dissolution of the glass surface. Based on the concentration analysis of the Si and B species dissolved into the solution phase, the dissolved layer thickness was found to increase from ~100 to ~170 nm as R increases from 0 to 1. The depth profiling analysis of the glasses retrieved from the solution showed that the concentration of modifier ions (Na⁺, Ca²⁺, and Mg²⁺) at the interface between the solution and the corroded glass surface decreased to around 40%–60% of the corresponding bulk concentrations, regardless of R and the leaching of modifier cations resulted in a silica-rich layer in the surface. The leaching of Ca²⁺ and Mg²⁺ ions occurred within ~50 and <25 nm, respectively, from the glass surface and this thickness was not a strong function of R. The leaching of Na⁺ ions varied monotonically; the thickness of the Na⁺ depletion layer increased from ~100 nm at R = 0 to ~200 nm at R = 1. Vibrational spectroscopy analysis suggested that the partial depletion of the ions may have caused some degree of the network re-arrangement or re-polymerization in the corroded layer. Overall, these results suggested that for the borosilicate glass, replacing [CaO] with [MgO] deteriorates the chemical durability in aqueous solution.     

Interpreting the optical properties of oxide glasses with machine learning and Shapely additive explanations

Due to their excellent optical properties, glasses are used for various applications ranging from smartphone screens to telescopes. Developing compositions with tailored Abbe number (V_d) and refractive index at 587.6 nm (n_d), two crucial optical properties, is a major challenge. To this extent, machine learning (ML) approaches have been successfully used to develop composition–property models. However, these models are essentially black boxes in nature and suffer from the lack of interpretability. In this paper, we demonstrate the use of ML models to predict the composition-dependent variations of V_d and n_d. Further, using Shapely additive explanations (SHAP), we interpret the ML models to identify the contribution of each of the input components toward target prediction. We observe that glass formers such as SiO₂, B₂O₃, and P₂O₅ and intermediates such as TiO₂, PbO, and Bi₂O₃ play a significant role in controlling the optical properties. Interestingly, components contributing toward increasing the n_d are found to decrease the V_d and vice versa. Finally, we develop the Abbe diagram, using the ML models, allowing accelerated discovery of new glasses for optical properties beyond the experimental pareto front. Overall, employing explainable ML, we predict and interpret the compositional control on the optical properties of oxide glasses.     

Indentation deformation and cracking behavior of hydrated aluminoborate glasses

Aluminoborate glasses have recently been found to feature high resistance to crack initiation during indentation due to a highly flexible network structure. In cesium aluminoborate glasses, it has been found that the use of a simple post-treatment, namely aging in a humid atmosphere, can further improve this resistance. To better understand the mechanical properties of this glass family upon humid aging, we here study the effect of aging conditions on the structure and mechanical properties of Li,K,Cs-aluminoborate glasses. As expected, we find that higher humidity and longer aging time cause more pronounced permeation of atmospheric water into the glasses. Due to their denser structure and stronger modifier-oxygen bonds, the humid aging has a relatively smaller effect on the mechanical properties of Li- and K-containing glasses relative to Cs-containing glasses, with the latter achieving an ultrahigh crack resistance. We find that the humid aging leads to the formation of a hydration layer in the Cs-aluminoborate glass surface, with a thickness of around 26 μm upon aging at 23 °C with 40% relative humidity for 7 days. Moreover, a remarkable indentation behavior, that is, the observation of μm-sized shear bands inside the imprint of the Cs-glass upon aging at 60% relative humidity is reported. Taken as a whole, the work provides guidelines for how to control the humid aging rate as a function of relative humidity and temperature to form a hydration layer and thus achieve improved crack resistance in such glasses.     

Electrochemical behavior of Ge and GeX2 (X = O, S) glasses: Improved reversibility of the reaction of Li with Ge in a sulfide medium

Sulfide glasses have been considered as new anode materials for lithium-ion batteries because their high ionic conductivity (approximately ≥10⁻⁴ S/cm) (more than one order of magnitude higher than oxide glasses (approximately ≤10⁻⁶ S/cm)) was expected to accelerate Li⁺ ion insertion into and extraction from anode materials during charge and discharge reactions. This intrinsic property can yield the reversible lithium-alloying reaction by minimizing the aggregation of lithium-alloy phases leading to the improvement of cycling behavior. To examine sulfide glasses as new anode materials, GeS₂ glass was chosen for study in this work due to its stability in air-atmospheres. The electrochemical properties of the GeS₂ glass were compared with those of the Ge metal and GeO₂ glass. The initial insertion of lithium into the GeX₂ (X = O, S) glasses leads to the formation of Li₂X (X = O, S) phases associated with the irreversible capacity on the first cycle. The improved reversibility of the reaction of lithium with Ge was observed in the Li₂S medium rather than Li₂O one, which leads to the improvement of cycle performance in the GeS₂ glass anode.     

Impact of network topology on the thermal and mechanical properties of lithium germanate glasses

In this work, we study the structure–topology–property relations of a series of melt-quenched lithium germanate glasses. These glasses exhibit the so-called germanate anomaly, that is, the germanium atoms feature a distribution of four-coordinated and higher coordinated germanium species, manifesting itself as anomalies in several material properties. Here, we couple variations in the number of atomic bond constraints with measured variations in thermal and mechanical properties, including thermal conductivity, Vickers hardness, and fracture toughness. For thermal conductivity, a strong correlation is found with sound velocity as well as with the volumetric constraint density. For hardness, a good correlation with volumetric constraint density is found, whereas, for fracture toughness, variations in network topology alone are insufficient to explain the composition–property relation. To account for this, we apply a recent model which incorporates knowledge of local structure, mechanical properties, and fracture patterns to predict the fracture toughness, showing a good qualitative agreement with the experimental data.     

P2O5含量对铝硅酸盐玻璃离子交换性能的影响

通过对玻璃进行了离子交换实验,研究P2O5含量变化对铝硅酸盐玻璃离子交换性能的影响.利用显微硬度仪、表面应力仪、微区X射线荧光光谱仪和场发射扫描电子显微镜线扫分别表征了离子交换玻璃的硬度、表面应力、元素含量变化和离子交换深度等性能.结果表明:离子交换后玻璃表面的K+含量明显增加,Na+含量降低,玻璃表面发生了明显的离子交换.此外,随着P2O5含量的增加,离子交换后的玻璃的硬度、表面应力和离子交换层深度逐渐增加.实验结果证明P2O5的引入能有效促进铝硅酸盐玻璃离子交换.     

Effect of soil pH on the degradation of silicate glasses

This paper reports the research on the physical-chemical response of silicate glasses subjected to the action of three natural soils types: acidic, neutral, and basic. The main goal of the study was to characterize the corrosion mechanisms acting upon glasses formulated with chemical compositions that are commonly found in historical glasses through an accelerated aging test that replicates natural burial. Resulting data showed a distinct and recognizable response of each glass type, with pH as the key variable for glass corrosion. Results can be of great significance to historical glass studies, especially in choosing suitable conservation strategies for archeological findings.