Adaptive fuzzy controller with sliding surface for vehicle suspension control

Since the hydraulic actuating suspension system has nonlinear and time-varying behavior, it is difficult to establish an accurate model for designing a model-based controller. Here, an adaptive fuzzy sliding mode controller is proposed to suppress the sprung mass position oscillation due to road surface variation. This intelligent control strategy combines an adaptive rule with fuzzy and sliding mode control algorithms. It has online learning ability to deal with the system time-varying and nonlinear uncertainty behaviors, and adjust the control rules parameters. Only eleven fuzzy rules are required for this active suspension system and these fuzzy control rules can be established and modified continuously by online learning. The experimental results show that this intelligent control algorithm effectively suppresses the oscillation amplitude of the sprung mass with respect to various road surface disturbances.     

基于AFSMC算法的四旋翼飞行器控制策略研究

针对四旋翼飞行器在飞行过程中,控制系统存在非线性、强耦合、不确定性和鲁棒性差的问题,建立了关于四旋翼飞行器的动力学数学模型,将自适应控制、模糊控制和滑模控制相结合,提出基于自适应模糊滑模控制(AFSMC)的快速平稳控制策略。采用模糊系统推理方法实现理想控制律的逼近。在满足李雅普诺夫稳定性条件的前提下进行控制器的设计和稳定性分析,并结合四旋翼的数学模型和给定参数进行了MATLAB仿真。仿真结果表明,AFSMC控制器相比常规PID控制器具有良好的动态性能和抗干扰能力。     

Adaptive fuzzy dynamic surface control for uncertain nonlinear systems

In this paper, a robust adaptive fuzzy dynamic surface control for a class of uncertain nonlinear systems is proposed. A novel adaptive fuzzy dynamic surface model is built to approximate the uncertain nonlinear functions by only one fuzzy logic system. The approximation capability of this model is proved and the model is implemented to solve the problem that too many approximators are used in the controller design of uncertain nonlinear systems. The shortage of ＂explosion of complexity＂ in backstepping design procedure is overcome by using the proposed dynamic surface control method. It is proved by constructing appropriate Lyapunov candidates that all signals of closed-loop systems are semi-globally uniformly ultimate bounded. Also, this novel controller stabilizes the states of uncertain nonlinear systems faster than the adaptive sliding mode controller （SMC）. Two simulation examples are provided to illustrate the effectiveness of the control approach proposed in this paper.     

线控转向系统的自适应高阶滑模控制

车辆线控转向(steer-by-wire,SbW)系统存在摩擦力矩及回正力矩等不确定动态特性,难以实现精确建模与有效控制.为此,提出一种基于自适应模糊逻辑系统的自适应高阶滑模(adaptive higher-order sliding mode, AHOSM)方法,实现SbW系统的有效控制.首先,通过自适应模糊逻辑系统逼近SbW系统的未知动态,使控制器的设计不再需要摩擦力矩及回正力矩的动力学模型;其次,采用高阶滑模和自适应增益技术削弱传统滑模控制器存在的抖振现象;再次,通过构造Lyapunov函数设计增益自适应律补偿逼近误差和系统不确定项对控制精度的影响,该方案不需要系统不确定项的界已知,且能够避免增益过估计现象;最后,通过稳定性分析证明该控制器可以在有限时间内建立实际滑动模态,数字仿真和硬件在环实验进一步验证了该控制方法的有效性和优越性.     

基于自适应模糊滑模控制的分数阶混沌系统的投影同步

基于模糊控制理论和滑模控制理论以及自适应控制理论,研究了一类含有外部扰动的不确定分数阶混沌系统的混合投影同步问题.提出了一种自适应模糊滑模控制的分数阶混沌系统投影同步方法.模糊逻辑系统用来逼近未知的非线性函数和外部扰动,并且对逼近误差采用了自适应控制,同时构造了一种具有较强鲁棒性的分数阶积分滑模面.应用分数阶Barbalat引理设计了自适应模糊滑模控制器和参数自适应律.最后数值仿真结果验证了所提控制方法的有效性.     

Fuzzy Sliding Mode Control for Active Suspension System with Proportional Differential Sliding Mode Observer

In this paper, a generalized augmented transformation is considered for the quarter active suspension system with uncertainties. Specifically, the model uncertainties are converted to the augmented states and a new proportion differential sliding mode observer is used to estimate state variables and model uncertainties. A differential geometric method is applied to linearize the nonlinear suspension model. In order to weaken the vibration effect of sliding mode control force and reduce energy consumption, a fuzzy sliding mode controller is designed for the active suspension system and the fuzzy controller is applied to adjust switching control gain according to the reaching condition of sliding mode surface. The simulations are conducted to illustrate the effectiveness and advantages of this proposed observer and control strategy.     

RCMAC-based adaptive control for uncertain nonlinear systems.

An adaptive control system, using a recurrent cerebellar model articulation controller (RCMAC) and based on a sliding mode technique, is developed for uncertain nonlinear systems. The proposed dynamic structure of RCMAC has superior capability to the conventional static cerebellar model articulation controller in an efficient learning mechanism and dynamic response. Temporal relations are embedded in RCMAC by adding feedback connections in the association memory space so that the RCMAC provides a dynamical structure. The proposed control system consists of an adaptive RCMAC and a compensated controller. The adaptive RCMAC is used to mimic an ideal sliding mode controller, and the compensated controller is designed to compensate for the approximation error between the ideal sliding mode controller and the adaptive RCMAC. The online adaptive laws of the control system are derived based on the Lyapunov stability theorem, so that the stability of the system can be guaranteed. In addition, in order to relax the requirement of the approximation error bound, an estimation law is derived to estimate the error bound. Finally, the simulation and experimental studies demonstrate the effectiveness of the proposed control scheme for the nonlinear systems with unknown dynamic functions.     

机器人操作器的自适应模糊滑模控制器设计

针对机器人动力学系统提出了一种基于模糊逻辑的自适应模糊滑模控制方案.根据滑模控制原理并利用模糊系统的逼近能力设计控制器,基于李雅谱诺夫方法设计自适应律,证明了闭环模糊控制系统的稳定性和跟踪误差的收敛性.控制结构简单,不需要复杂的运算.该设计方案柔化了控制信号,减轻了一般滑模控制的抖振现象.仿真结果表明了所提控制策略的有效性.     

直线同步电动机磁悬浮系统的自适应模糊滑模控制

提出一种自适应模糊滑模控制方法用以提高可控励磁直线同步电动机(controllable excitation linear synchronous motor, CELSM)磁悬浮控制系统的性能.根据CELSM的特定结构和运行机理,建立CELSM磁悬浮系统的数学模型,包括励磁回路的电压方程、磁悬浮力方程和运动方程;设计积分滑模面和分段趋近律,系统状态轨迹可以根据距滑模面的距离自动切换趋近速度,以很小的斜率穿越滑模面,减小系统的抖振,推导出相应的滑模控制器;为了克服不确定性扰动对系统的影响,设计自适应律使自适应模糊系统对不确定性扰动进行实时估计,用该估计值进行前馈补偿控制,减小控制律中的切换增益和系统的抖振,进一步推导出自适应模糊滑模控制器;用Matlab对控制系统进行仿真,仿真结果表明,采用自适应模糊滑模控制的CELSM磁悬浮系统的性能得到改善.     

基于模糊逻辑的一类非线性系统直接自适应控制

针对一类连续非线性不稳定系统,基于模糊逻辑提出了一种新的自适应跟踪控制方法,在此方法中,控制器由两部分组成：模糊逼近控制器（FAC）和模糊滑模补偿控制器（FSMCC）,其中,FAC利用模糊逻辑系统全局逼近理论控制器,FSMCC用于全局补偿逼近误差和系统的不确定性及消除外部干扰的影响,整个闭环控制系统在Lyapunov意义下全局渐进稳定踊跃误差收敛于零的某一领域内,最后通过示例验证了本方法的有效性。     

船舶航向非线性系统的多滑模自适应模糊控制

针对参数未知的船舶航向非线性控制系统数学模型,在考虑舵机伺服机构特性的情况下,船舶航向控制问题就成为一个虚拟控制系数未知的非匹配不确定非线性控制问题.基于多滑模设计方法和模糊逻辑系统的逼近能力,提出了一种多滑模自适应模糊控制算法,通过引入非连续投影算法和积分型Lyapunov函数,提高了系统在抑制参数漂移、控制器奇异等方面的能力.借助Lyapunov函数证明了所设计控制器使最终的闭环非匹配不确定船舶运动非线性系统中的所有信号有界,且跟踪误差收敛到零.仿真研究表明:该算法与传统的PID控制相比,具有较好的跟踪能力和自适应能力.     

无刷直流电机的自适应模糊滑模控制策略研究

为了提高无刷直流电机（BLDCM,brushless dC motor）控制系统的动态响应速度和干扰抑制能力,提出了一种新的自适应模糊滑模控制（AFSMC,adaptive fuzzy sliding mode control）策略。控制系统根据滑模开关函数的取值范围,可以切换滑模控制器的输出,能够改进滑模观测器的抖振现象和系统稳定性。控制器的控制律由自适应模糊控制算法调节,滑模控制器的输出减少了系统不确定时延的影响。根据所提出控制策略建立了仿真模型,并进行了仿真。仿真结果表明,所提出的控制策略能提高系统的动态性能和鲁棒性。该方法用于无刷直流电机的控制是可行的、有效的。     

自适应模糊滑模控制器的设计与分析

研究一类非线性系统的自适应模糊控制问题,根据滑模控制原理并利用I型模糊系 统的逼近能力,提出了一种自适应模糊滑模控制器的设计方案.通过理论分析,证明了闭环模 糊控制系统的全局稳定的,跟踪误差可收敛到零的一个领域内.     

一类MIMO非线性系统的直接自适应模糊滑模控制

针对一类具有下三角形函数控制增益矩阵的非线性系统, 基于滑模控制原理, 并利用Ⅱ型模糊系统的逼近能力, 提出了一种直接自适应模糊滑模控制器设计的新方案. 通过引入积分型李雅普诺夫函数及逼近误差自适应补偿项, 证明了闭环系统是全局稳定的, 跟踪误差收敛到零. 仿真结果表明了该方法的有效性.     

Adaptive Fuzzy Switched Swing-Up and Sliding Control for the Double-Pendulum-and-Cart System

In this paper, an adaptive fuzzy switched swing-up and sliding controller (AFSSSC) is proposed for the swing-up and position controls of a double-pendulum-and-cart system. The proposed AFSSSC consists of a fuzzy switching controller (FSC), an adaptive fuzzy swing-up controller (FSUC), and an adaptive hybrid fuzzy sliding controller (HFSC). To simplify the design of the adaptive HFSC, the double-pendulum-and-cart system is reformulated as a double-pendulum and a cart subsystem with matched time-varying uncertainties. In addition, an adaptive mechanism is provided to learn the parameters of the output fuzzy sets for the adaptive HFSC. The FSC is designed to smoothly switch between the adaptive FSUC and the adaptive HFSC. Moreover, the sliding mode and the stability of the fuzzy sliding control systems are guaranteed. Simulation results are included to illustrate the effectiveness of the proposed AFSSSC.      

Adaptive fuzzy terminal sliding mode controller for linear systems with mismatched time-varying uncertainties

A new design approach of an adaptive fuzzy terminal sliding mode controller for linear systems with mismatched time-varying uncertainties is presented in this paper. A fuzzy terminal sliding mode controller is designed to retain the advantages of the terminal sliding mode controller and to reduce the chattering occurred with the terminal sliding mode controller. The sufficient condition is provided for the uncertain system to be invariant on the sliding surface. The parameters of the output fuzzy sets in the fuzzy mechanism are adapted on-line to improve the performance of the fuzzy sliding mode control system. The bounds of the uncertainties are not required to be known in advance for the presented adaptive fuzzy sliding mode controller. The stability of the fuzzy control system is also guaranteed. Moreover, the chattering around the sliding surface in the sliding mode control can be reduced by the proposed design approach. Simulation results are included to illustrate the effectiveness of the proposed adaptive fuzzy terminal sliding mode controller.     

Backstepping sliding mode control with FWNN for strict output feedback non-smooth nonlinear dynamic system

An output feedback backstepping sliding mode control scheme was developed for precision positioning of a strict single-input and single-output (SISO) non-smooth nonlinear dynamic system that could compensate for deadzone, dynamic friction, uncertainty and estimations of immeasurable states. An adaptive fuzzy wavelet neural networks (FWNNs) technique was used to provide improved approximation ability to the system uncertainty. The adaptive laws were derived for application to estimate the deadzone and friction parameters using recursive backstepping controller design procedures. In addition, the sliding mode control method was also combined to enforce the robustness of the output feedback backstepping controller against disturbance. The Lyapunov stability theorem was used to prove stability of the proposed control system. The usefulness of the proposed control system was verified by simulations and experiments on a robot manipulator in the presence of a deadzone and friction in the actuator.     

Adaptive sliding mode controller design based on T-S fuzzy system models

An adaptive sliding mode control (ASMC) technique based on T-S fuzzy system models is proposed in this paper for a class of perturbed nonlinear MIMO dynamic systems in order to solve tracking problems. A T-S fuzzy model is firstly formed by utilizing fuzzy theorem to amalgamate a set of linearized dynamic equations. The adaptive sliding mode controller is then designed based on this fuzzy model with perturbations. The proposed control scheme can drive the dynamics of controlled system into a designated sliding surface in finite time, and guarantee the property of asymptotical stability. It is also shown that the information of upper bound of modeling errors as well as perturbations, except the information of upper bound of input uncertainty, is not required when using the proposed controller.     

FPGA‐based adaptive dynamic sliding‐mode neural control for a brushless DC motor

In the adaptive neural control design, since the number of hidden neurons is finite for real‐time applications, the approximation errors introduced by the neural network cannot be inevitable. To ensure the stability of the adaptive neural control system, a switching compensator is designed to dispel the approximation error. However, it will lead to substantial chattering in the control effort. In this paper, an adaptive dynamic sliding‐mode neural control (ADSNC) system composed of a neural controller and a fuzzy compensator is proposed to tackle this problem. The neural controller, using a radial basis function neural network, is the main controller and the fuzzy compensator is designed to eliminate the approximation error introduced by the neural controller. Moreover, a proportional‐integral‐type adaptation learning algorithm is developed based on the Lyapunov function; thus not only the system stability can be guaranteed but also the convergence of the tracking error and controller parameters can speed up. Finally, the proposed ADSNC system is implemented based on a field programmable gate array chip for low‐cost and high‐performance industrial applications and is applied to control a brushless DC (BLDC) motor to show its effectiveness. The experimental results demonstrate the proposed ADSNC scheme can achieve favorable control performance without encountering chattering phenomena. Copyright © 2010 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Sliding mode control of wind-induced vibrations using fuzzy sliding surface and gain adaptation

Although fuzzy/adaptive sliding mode control can reduce the chattering problem in structural vibration control applications, they require the equivalent control and the upper bounds of the system uncertainties. In this paper, we used fuzzy logic to approximate the standard sliding surface and designed a dead-zone adaptive law for tuning the switching gain of the sliding mode control. The stability of the proposed controller is established using Lyapunov stability theory. A six-storey building prototype equipped with an active mass damper has been used to demonstrate the effectiveness of the proposed controller towards the wind-induced vibrations.