共查询到20条相似文献,搜索用时 328 毫秒
1.
In this paper, an adaptive type-2 fuzzy sliding mode control to tolerate actuator faults of unknown nonlinear systems with external disturbances is presented. Based on a redundant actuation structure, a novel type-2 adaptive fuzzy fault tolerant control scheme is proposed using sliding mode control. Two adaptive type-2 fuzzy logic systems are used to approximate the unknown functions, whose adaptation laws are deduced from the stability analysis. The proposed approach allows to ensure good tracking performance despite the presence of actuator failures and external disturbances, as illustrated through a simulation example. 相似文献
2.
ABSTRACTThis paper proposed a new adaptive integral sliding mode FTC scheme to deal with the actuator faults and failure. The scheme combines integral sliding mode control, control allocation scheme and adaptive strategy. The unknown actuator faults are handled by adaptive modulation gain of nonlinear ISMC law. To cope with complete failure, control allocation scheme is integrated with the baseline controller to provide tolerance. The proposed strategy relies on the estimate of actuator effectiveness. Therefore, an adaptive sliding mode observer based fault reconstruction scheme is proposed in this paper. The proposed scheme is implemented on dissimilar redundant actuation system driven by hydraulic and electro-hydraulic actuators. In nominal and faulty conditions, both actuators are contributing to achieving the desired control surface deflection. However, when the actuator failure occurs, the control signals are reallocated to the redundant actuator. The problem of dynamics mismatch is addressed using fractional order controller designed in an inner loop. The comparison with the existing literature is also conducted in the simulation to validate the dominant performance. 相似文献
3.
In this paper, a fault estimation and fault-tolerant control problem for a class of T-S fuzzy stochastic time-delay systems with actuator and sensor faults is investigated. A novel sliding mode observer is proposed, which can simultaneously estimate the system states, actuator and sensor faults with good accuracy. Based on the state and actuator fault estimation, a new sliding mode control scheme is developed, which can effectively eliminate the influence of actuator fault. Sufficient conditions for the existence of the proposed observer and fault-tolerant sliding mode controller are provided in terms of linear matrix inequality, and moreover, the reachability of the sliding mode surface can be guaranteed under the proposed control scheme. The propose sliding mode observer and fault-tolerant sliding mode controller can overcome the restrictive assumption that the input matrix of all local modes is the same. Finally, a numerical example is provided to verify the effectiveness of the proposed sliding mode observer and fault-tolerant sliding mode control technique. 相似文献
4.
本文针对双电机同步驱动伺服系统中执行器失效会导致系统性能下降甚至失稳的情况,提出了一种基于自适应滑模的故障诊断和容错控制策略.该方法通过设计各电机转速的自适应滑模状态观测器,在线估计各执行器的失效因子:当单个执行器部分失效时,通过自适应的方法调整控制器增益;当单个执行器全部失效时,重构系统的控制律.对于系统中存在非匹配不确定项的情况,提出在期望虚拟信号中引入基于扩张状态观测器的补偿项抑制方案;利用Lyapunov理论证明了闭环系统在正常和故障状况下的稳定性以及观测器的收敛性;仿真结果表明,所设计的控制策略能保证系统稳定跟踪指令信号,在单个执行器失效的情况下系统跟踪性能基本不下降. 相似文献
5.
With a focus on aero‐engine distributed control systems (DCSs) with Markov time delay, unknown input disturbance, and sensor and actuator simultaneous faults, a combined fault tolerant algorithm based on the adaptive sliding mode observer is studied. First, an uncertain augmented model of distributed control system is established under the condition of simultaneous sensor and actuator faults, which also considers the influence of the output disturbances. Second, an augmented adaptive sliding mode observer is designed and the linear matrix inequality (LMI) form stability condition of the combined closed‐loop system is deduced. Third, a robust sliding mode fault tolerant controller is designed based on fault estimation of the sliding mode observer, where the theory of predictive control is adopted to suppress the influence of random time delay on system stability. Simulation results indicate that the proposed sliding mode fault tolerant controller can be very effective despite the existence of faults and output disturbances, and is suitable for the simultaneous sensor and actuator faults condition. 相似文献
6.
针对存在执行机构故障和外部干扰的刚体航天器姿态稳定系统,本文提出了基于积分滑模的容错控制策略,实现了姿态有限时间稳定.首先,利用齐次系统相关理论,设计了一类饱和有界的基础控制律,保证了不存在执行机构故障和干扰情况下的姿态有限时间稳定.在此基础上,利用积分滑模和自适应技术设计了一种有限时间姿态鲁棒容错控制方案,对执行机构故障和干扰进行有效的补偿;该方案能够快速地实现姿态高精度稳定,并抑制系统抖振现象.最后,将本文提出的姿态容错控制方案进行数值仿真与对比,验证了方案的有效性与优越性. 相似文献
7.
This paper is concerned with the sliding mode control of uncertain nonlinear systems against actuator faults and external disturbances based on delta operator approach. The nonlinearity, actuator fault, and external disturbance are considered in this study, and the bounds of Euclidean norms of the nonlinearity and the specific lower and upper bounds of the actuator faults and the disturbances are unknown knowledge. Our attention is mainly focused on designing a sliding mode fault‐tolerant controller to compensate the effects from the nonlinearity, unknown actuator fault, and external disturbance. Based on Lyapunov stability theory, a novel‐adaptive fault‐tolerant sliding mode control law is deigned such that the resulting closed loop delta operator system is finite‐time convergence and the actuator faults can be tolerated, simultaneously. Finally, simulation results are provided to verify the effectiveness of the proposed control design scheme. Copyright © 2017 John Wiley & Sons, Ltd. 相似文献
8.
This paper investigates the sliding mode control (SMC) problem for switched systems. The parameter uncertainties are norm-bounded, and the upper bound of the nonlinear term and the loss of effectiveness of actuator faults are unknown. A novel adaptive sliding mode controller is constructed such that the influences of actuator faults and unknown nonlinearity can be effectively attenuated and the state variables can reach the predefined common sliding surface. Based on average dwell time strategy, the exponential stability condition of the switched systems is obtained. Finally, simulation results are presented to show the effectiveness of the proposed techniques. 相似文献
9.
针对一类不确定非线性系统, 基于滑模观测器研究执行器和传感器同时故障时的鲁棒重构问题. 引入线性变换矩阵并添加后置滤波器构建增维系统, 综合??∞ 控制将鲁棒滑模观测器增益矩阵设计方法, 转化为LMI 约束下的多目标凸优化问题. 在滑模增益中添加了自适应律, 确保状态估计误差渐近稳定, 同时滑模运动经有限时间到达滑模面, 在此基础上给出执行器和传感器故障同时重构算法. 最后通过数值算例表明了所提出方法的有效性. 相似文献
10.
针对小卫星在轨运行中存在输入饱和、干扰力矩与执行器故障的姿态跟踪控制问题,提出了一种反步自适应滑模变结构鲁棒容错控制方法。该方法将反步控制和滑模控制相结合,利用自适应算法估计执行器有效因子最小值和干扰上界,避免了对故障的检测与隔离,实现了输入饱和、干扰和故障对系统稳定性影响的抑制。基于Lyapunov方法从理论上证明了闭环系统的稳定性;将该方法用于小卫星的状态跟踪控制,仿真结果表明该控制器能有效处理姿态控制时输入饱和受限的约束,对部分失效和偏差型故障具有较强的容错能力,并具有一定鲁棒性。 相似文献
11.
This paper investigates the fixed‐time attitude tracking problem for rigid spacecraft in the presence of inertial uncertainties, external disturbances, actuator faults, and input saturation constraints. The logarithm map is first utilized to transform the tracking problem on SO(3) into the stabilization one on its associated Lie algebra ( ). A novel nonsingular fixed‐time‐based sliding mode is designed, which not only avoids the singularity but also guarantees that the convergence time of tracking errors along the sliding surface is independent of the state value. Then, an adaptive fault‐tolerant control law is constructed, in which an online adaptive law is incorporated to estimate the upper boundary of the lumped uncertainties. The combined control scheme enforces the system state to reach a neighborhood of the sliding surface in the sense of the fixed‐time concept. The key feature of the resulting control scheme is that it can accommodate actuator failures under limited control torque without the knowledge of fault information. Numerical simulations are finally performed to demonstrate the effectiveness of the proposed fixed‐time controllers. 相似文献
12.
Electrical wiring interconnection system (EWIS) of civil aircraft has been paid more attention in recent years, and intermittent failure detection of electrical connectors in EWIS is a challenging problem. This paper presents a sliding mode observer (SMO) approach for the intermittent failure detection of an aircraft electrical system with multiple connector failures. The mathematical model of the aircraft electrical system which contains multiple connector failures is established for transforming the intermittent failure detection problem into observer-based multiplicative faults isolation and estimation problems. A set of adaptive sliding mode observers are designed to locate the failure connectors preliminarily, the observers can adapt the unknown upper bound of the faults. Furthermore, a fault-reconstruction scheme applying the equivalent output error injection principle is proposed for fault estimation, where the characteristic parameters of connecters are reconstructed to identify the failures. Finally, a numerical example is provided to show the effectiveness of the proposed method. 相似文献
13.
A robust fault‐tolerant control scheme is proposed for uncertain nonlinear systems with zero dynamics, affected by actuator faults and lock‐in‐place and float failures. The proposed controller utilizes an adaptive second‐order sliding mode strategy integrated with the backstepping procedure, retaining the benefits of both the methodologies. A Lyapunov stability analysis has been conducted, which unfolds the advantages offered by the proposed methodology in the presence of inherent modeling errors and strong eventualities of faults and failures. Two modified adaptive laws have been formulated, to approximate the bounds of uncertainties due to modeling and to estimate the fault‐induced parametric uncertainties. The proposed scheme ensures robustness towards linearly parameterized mismatched uncertainties, in addition to parametric and nonparametric matched perturbations. The proposed controller has been shown to yield an improved post‐fault transient performance without any additional expense in the control energy spent. The proposed scheme is applied to the pitch control problem of a nonlinear longitudinal model of Boeing 747‐100/200 aircraft. Simulation results support theoretical propositions and confirm that the proposed controller produces superior post‐fault transient performance compared with already existing approaches designed for similar applications. Besides, the asymptotic stability of the overall controlled system is also established in the event of such faults and failures. Copyright © 2015 John Wiley & Sons, Ltd. 相似文献
14.
This article focuses on the problem of fixed-time prescribed performance platoon control for heterogeneous vehicles with unknown dead-zone and actuator saturation. First, an equivalent transformation is developed to approximate the actuator nonlinearity (i.e., dead-zone and saturation), which reduces the complexity of controller design. Then, to guarantee the tracking errors converge to the predetermined region in the given time, a modified prescribed performance function is presented. Based on this, a novel adaptive sliding mode control scheme is developed in the context of fixed-time theory, which is proved to be capable of ensuring individual vehicle stability and string stability in fixed time. In addition, under the proposed control scheme, the convergence time is independent of initial conditions of the system. Finally, numerical simulations are carried out to demonstrate the effectiveness of the proposed control scheme. 相似文献
15.
In this paper, novel adaptive sliding mode dynamic controller with integrator in the loop is proposed for nonholonomic wheeled mobile robot (WMR). The modified kinematics controller is used to generate kinematics velocities of WMR which are subsequently used as the input to adaptive dynamic controller. Actuator dynamics are also derived to generate actuator voltage of WMR through torque and velocity vectors. Stability of both kinematics and dynamic controller is presented using Lyapunov stability analysis. The proposed scheme is verified and validated using computer simulations for tracking the desired trajectory of WMR. The performance of proposed scheme is compared with standard backstepping kinematics controller and classical sliding mode control. In addition, the performance is further compared with standard backstepping kinematics controller with adaptive sliding mode controller without integrator. It is shown that the proposed scheme exhibits zero steady state error, fast error convergence and robustness in the presence of continuous disturbances and uncertainties. 相似文献
16.
This paper investigates the networked control system (NCS) with faults and disturbances which affect both actuator and sensor. A fast high-order sliding mode (FHOSM) controller is proposed to compensate for actuator faults and sensor disturbances, which is constructed based on the estimated information of the NCS. Accordingly, an adaptive observer with multi-stage is designed to estimate the states and sensor disturbances and protect the NCS from actuator faults. Furthermore, a new sliding function is assembled to realize the finite-time convergence of system states. The stability of the system with the suggested procedure is illustrated by the stability analysis underneath the designed control law. Finally, the simulation results are implemented and confirm the effectiveness of the proposed method in defending the system against both issues and inhibiting system failures. 相似文献
17.
This paper investigates the robust finite-time attitude tracking control problem for rigid spacecraft considering the modeling uncertainty, external disturbance and actuator saturation. An auxiliary system is proposed to directly compensate for the saturated control input. First, the basic controller is formulated based on the fast nonsingular terminal sliding mode surface (FNTSMS), the fast-TSM-type reaching law and the auxiliary system in the presence of upper bounded external disturbance. Then, when facing system uncertainty which consists of both modeling uncertainty and external disturbance and has upper bounded first derivative, the extended state observer (ESO) is associated with the first controller to improve the robustness of control system. Furthermore, to handle more general system uncertainty which is upper bounded by a polynomial function of the closed-loop system states, a continuous adaptive controller is designed to compensate for the total system uncertainty on line. The proposed controllers are able to deal with system uncertainty, input singularity and actuator saturation, while simultaneously providing fast finite-time convergence speed for the control system. And the problems of complex parameters selection process and repeated differentiations of nonlinear functions can be avoided. Rigorous stability analyses are given via the Lyapunov stability theory and digital simulations are conducted to illustrate the effectiveness of the proposed controllers. 相似文献
18.
This paper presents a methodological approach to design an observer-based adaptive sliding mode control to realize the problem of robust tracking and modeling following for a class of uncertain linear systems. Only partial information of the system states is known. Based on Lyapunov stability theorem, it will be shown that the proposed scheme guarantees the stability of closed-loop system and achieves zero-tracking error in the presence of parameter uncertainties and external disturbances. The proposed observer-based adaptive sliding mode control scheme can be implemented without requiring a priori knowledge of upper bounds on the norm of the uncertainties and external disturbances. This scheme assures robustness against system uncertainties and disturbances. Both the theoretical analysis and illustrative example demonstrate the validity of the proposed scheme. 相似文献
19.
本文研究了四旋翼无人机执行器发生部分失效时的姿态控制问题.通过分析其动力学特性,将执行器故障以乘性因子加入系统模型,得到执行器故障情况下四旋翼无人机的姿态动力学模型.在同时存在未知外部扰动和执行器故障的情况下,设计了一种基于自适应滑模控制的容错控制器.利用基于Lyapunov的分析方法证明了所设计控制器的渐近稳定性.在四旋翼无人机实验平台上进行了实验,验证了该算法对存在未知外部扰动和执行器部分失效时四旋翼无人机的姿态控制具有较好的鲁棒性. 相似文献
20.
针对一类执行器及传感器同时发生故障的非线性系统,综合鲁棒滑模重构观测器及自适应滑模容错控制器设计技术,提出一体化跟踪主动容错控制方案.首先,将系统增维变换为广义系统,运用广义约束逆引入辅助矩阵,采用线性矩阵不等式设计观测器系数矩阵,综合自适应律给出广义鲁棒滑模观测器设计程式;在此基础之上,通过设计鲁棒滑模微分器估计输出向量微分,结合广义鲁棒滑模观测器状态估计结论,实现执行器及传感器故障同时重构.其次,基于故障重构及状态估计结论,提出自适应滑模的跟踪主动容错控制律设计程式.最后,通过开展飞行模拟转台伺服系统数值仿真,检验一体化跟踪主动容错控制器设计方法的有效性. 相似文献
|