Ultrahigh‐Sensitive Broadband Photodetectors Based on Dielectric Shielded MoTe2/Graphene/SnS2 p–g–n Junctions

2D atomic sheets of transition metal dichalcogenides (TMDs) have a tremendous potential for next‐generation optoelectronics since they can be stacked layer‐by‐layer to form van der Waals (vdW) heterostructures. This allows not only bypassing difficulties in heteroepitaxy of lattice‐mismatched semiconductors of desired functionalities but also providing a scheme to design new optoelectronics that can surpass the fundamental limitations on their conventional semiconductor counterparts. Herein, a novel 2D h‐BN/p‐MoTe₂/graphene/n‐SnS₂/h‐BN p–g–n junction, fabricated by a layer‐by‐layer dry transfer, demonstrates high‐sensitivity, broadband photodetection at room temperature. The combination of the MoTe₂ and SnS₂ of complementary bandgaps, and the graphene interlayer provides a unique vdW heterostructure with a vertical built‐in electric field for high‐efficiency broadband light absorption, exciton dissociation, and carrier transfer. The graphene interlayer plays a critical role in enhancing sensitivity and broadening the spectral range. An optimized device containing 5?7‐layer graphene has been achieved and shows an extraordinary responsivity exceeding 2600 A W^?1 with fast photoresponse and specific detectivity up to ≈10¹³ Jones in the ultraviolet–visible–near‐infrared spectrum. This result suggests that the vdW p–g–n junctions containing multiple photoactive TMDs can provide a viable approach toward future ultrahigh‐sensitivity and broadband photonic detectors.     

Graphene Hybrid Structures for Integrated and Flexible Optoelectronics

Graphene (Gr) has many unique properties including gapless band structure, ultrafast carrier dynamics, high carrier mobility, and flexibility, making it appealing for ultrafast, broadband, and flexible optoelectronics. To overcome its intrinsic limit of low absorption, hybrid structures are exploited to improve the device performance. Particularly, van der Waals heterostructures with different photosensitive materials and photonic structures are very effective for improving photodetection and modulation efficiency. With such hybrid structures, Gr hybrid photodetectors can operate from ultraviolet to terahertz, with significantly improved R (up to 10⁹ A W⁻¹) and bandwidth (up to 128 GHz). Furthermore, integration of Gr with silicon (Si) complementary metal-oxide-semiconductor (CMOS) circuits, the human body, and soft tissues is successfully demonstrated, opening promising opportunities for wearable sensors and biomedical electronics. Here, the recent progress in using Gr hybrid structures toward high-performance photodetectors and integrated optoelectronic applications is reviewed.     

High‐Performance Photovoltaic Detector Based on MoTe2/MoS2 Van der Waals Heterostructure

Van der Waals heterostructures based on 2D layered materials have received wide attention for their multiple applications in optoelectronic devices, such as solar cells, light‐emitting devices, and photodiodes. In this work, high‐performance photovoltaic photodetectors based on MoTe₂/MoS₂ vertical heterojunctions are demonstrated by exfoliating‐restacking approach. The fundamental electric properties and band structures of the junction are revealed and analyzed. It is shown that this kind of photodetectors can operate under zero bias with high on/off ratio (>10⁵) and ultralow dark current (≈3 pA). Moreover, a fast response time of 60 µs and high photoresponsivity of 46 mA W^?1 are also attained at room temperature. The junctions based on 2D materials are expected to constitute the ultimate functional elements of nanoscale electronic and optoelectronic applications.     

Lateral Graphene‐Contacted Vertically Stacked WS2/MoS2 Hybrid Photodetectors with Large Gain

A demonstration is presented of how significant improvements in all‐2D photodetectors can be achieved by exploiting the type‐II band alignment of vertically stacked WS₂/MoS₂ semiconducting heterobilayers and finite density of states of graphene electrodes. The photoresponsivity of WS₂/MoS₂ heterobilayer devices is increased by more than an order of magnitude compared to homobilayer devices and two orders of magnitude compared to monolayer devices of WS₂ and MoS₂, reaching 10³ A W^?1 under an illumination power density of 1.7 × 10² mW cm^?2. The massive improvement in performance is due to the strong Coulomb interaction between WS₂ and MoS₂ layers. The efficient charge transfer at the WS₂/MoS₂ heterointerface and long trapping time of photogenerated charges contribute to the observed large photoconductive gain of ≈3 × 10⁴. Laterally spaced graphene electrodes with vertically stacked 2D van der Waals heterostructures are employed for making high‐performing ultrathin photodetectors.     

High Detectivity and Transparent Few‐Layer MoS2/Glassy‐Graphene Heterostructure Photodetectors

Layered van der Waals heterostructures have attracted considerable attention recently, due to their unique properties both inherited from individual two‐dimensional (2D) components and imparted from their interactions. Here, a novel few‐layer MoS₂/glassy‐graphene heterostructure, synthesized by a layer‐by‐layer transfer technique, and its application as transparent photodetectors are reported for the first time. Instead of a traditional Schottky junction, coherent ohmic contact is formed at the interface between the MoS₂ and the glassy‐graphene nanosheets. The device exhibits pronounced wavelength selectivity as illuminated by monochromatic lights. A responsivity of 12.3 mA W^?1 and detectivity of 1.8 × 10¹⁰ Jones are obtained from the photodetector under 532 nm light illumination. Density functional theory calculations reveal the impact of specific carbon atomic arrangement in the glassy‐graphene on the electronic band structure. It is demonstrated that the band alignment of the layered heterostructures can be manipulated by lattice engineering of 2D nanosheets to enhance optoelectronic performance.     

Dynamics of Antimonene–Graphene Van Der Waals Growth

Van der Waals (vdW) heterostructures have recently been introduced as versatile building blocks for a variety of novel nanoscale and quantum technologies. Harnessing the unique properties of these heterostructures requires a deep understanding of the involved interfacial interactions and a meticulous control of the growth of 2D materials on weakly interacting surfaces. Although several epitaxial vdW heterostructures have been achieved experimentally, the mechanisms governing their synthesis are still nebulous. With this perspective, herein, the growth dynamics of antimonene on graphene are investigated in real time. In situ low‐energy electron microscopy reveals that nucleation predominantly occurs on 3D nuclei followed by a self‐limiting lateral growth with morphology sensitive to the deposition rate. Large 2D layers are observed at high deposition rates, whereas lower growth rates trigger an increased multilayer nucleation at the edges as they become aligned with the Z2 orientation leading to atoll‐like islands with thicker, well‐defined bands. This complexity of the vdW growth is elucidated based on the interplay between the growth rate, surface diffusion, and edges orientation. This understanding lays the groundwork for a better control of the growth of vdW heterostructures, which is critical to their large‐scale integration.     

Anisotropic Magneto‐Coulomb Properties of 2D–0D Heterostructure Single Electron Device

Fabrication and spintronics properties of 2D–0D heterostructures are reported. Devices based on graphene (“Gr”)–aluminium nanoclusters heterostructures show robust and reproducible single‐electron transport features, in addition to spin‐dependent functionality when using a top magnetic electrode. The magnetic orientation of this single ferromagnetic electrode enables the modulation of the environmental charge experienced by the aluminium nanoclusters. This anisotropic magneto‐Coulomb effect, originating from spin–orbit coupling within the ferromagnetic electrode, provides tunable spin valve‐like magnetoresistance signatures without the requirement of spin coherent charge tunneling. These results extend the capability of Gr to act both as electrode and as a platform for the growth of 2D–0D mixed‐dimensional van der Waals heterostructures, providing magnetic functionalities in the Coulomb blockade regime on scalable spintronic devices. These heterostructures pave the way towards novel device architectures at the crossroads of 2D material physics and spin electronics.     

Edge‐Epitaxial Growth of 2D NbS2‐WS2 Lateral Metal‐Semiconductor Heterostructures

2D metal‐semiconductor heterostructures based on transition metal dichalcogenides (TMDs) are considered as intriguing building blocks for various fields, such as contact engineering and high‐frequency devices. Although, a series of p–n junctions utilizing semiconducting TMDs have been constructed hitherto, the realization of such a scheme using 2D metallic analogs has not been reported. Here, the synthesis of uniform monolayer metallic NbS₂ on sapphire substrate with domain size reaching to a millimeter scale via a facile chemical vapor deposition (CVD) route is demonstrated. More importantly, the epitaxial growth of NbS₂‐WS₂ lateral metal‐semiconductor heterostructures via a “two‐step” CVD method is realized. Both the lateral and vertical NbS₂‐WS₂ heterostructures are achieved here. Transmission electron microscopy studies reveal a clear chemical modulation with distinct interfaces. Raman and photoluminescence maps confirm the precisely controlled spatial modulation of the as‐grown NbS₂‐WS₂ heterostructures. The existence of the NbS₂‐WS₂ heterostructures is further manifested by electrical transport measurements. This work broadens the horizon of the in situ synthesis of TMD‐based heterostructures and enlightens the possibility of applications based on 2D metal‐semiconductor heterostructures.     

PtTe2‐Based Type‐II Dirac Semimetal and Its van der Waals Heterostructure for Sensitive Room Temperature Terahertz Photodetection

Recent years have witnessed rapid progresses made in the photoelectric performance of two‐dimensional materials represented by graphene, black phosphorus, and transition metal dichalcogenides. Despite significant efforts, a photodetection technique capable for longer wavelength, higher working temperature as well as fast responsivity, is still facing huge challenges due to a lack of best among bandgap, dark current, and absorption ability. Exploring topological materials with nontrivial band transport leads to peculiar properties of quantized phenomena such as chiral anomaly, and magnetic‐optical effect, which enables a novel feasibility for an advanced optoelectronic device working at longer wavelength. In this work, the direct generation of photocurrent at low energy terahertz (THz) band at room temperature is implemented in a planar metal–PtTe₂–metal structure. The results show that the THz photodetector based on PtTe₂ with bow‐tie‐type planar contacts possesses a high photoresponsivity (1.6 A W^?1 without bias voltage) with a response time less than 20 µs, while the PtTe₂–graphene heterostructure‐based detector can reach responsivity above 1.4 kV W^?1 and a response time shorter than 9 µs. Remarkably, it is already exploitable for large area imaging applications. These results suggest that topological semimetals such as PtTe₂ can be ideal materials for implementation in a high‐performing photodetection system at THz band.     

Thermally Phase‐Transformed In2Se3 Nanowires for Highly Sensitive Photodetectors

The photoresponse characteristics of In₂Se₃ nanowire photodetectors with the κ‐phase and α‐phase structures are investigated. The as‐grown κ‐phase In₂Se₃ nanowires by the vapor‐liquid‐solid technique are phase‐transformed to the α‐phase nanowires by thermal annealing. The photoresponse performances of the κ‐phase and α‐phase In₂Se₃ nanowire photodetectors are characterized over a wide range of wavelengths (300–900 nm). The phase of the nanowires is analyzed using a high‐resolution transmission microscopy equipped with energy dispersive X‐ray spectroscopy and X‐ray diffraction. The electrical conductivity and photoresponse characteristics are significantly enhanced in the α‐phase due to smaller bandgap structure compared to the κ‐phase nanowires. The spectral responsivities of the α‐phase devices are 200 times larger than those of the κ‐phase devices. The superior performance of the thermally phase‐transformed In₂Se₃ nanowire devices offers an avenue to develop highly sensitive photodetector applications.     

P‐GaSe/N‐MoS2 Vertical Heterostructures Synthesized by van der Waals Epitaxy for Photoresponse Modulation

The important role of p–n junction in modulation of the optoelectronic properties of semiconductors is widely cognized. In this work, for the first time the synthesis of p‐GaSe/n‐MoS₂ heterostructures via van der Waals expitaxial growth is reported, although a considerable lattice mismatching of ≈18% exists. According to the simulation, a significant type II p–n junction barrier located at the interface is expected to be formed, which can modulate optoelectronic properties of MoS₂ effectively. It is intriguing to reveal that the presence of GaSe can result in obvious Raman and photoluminescence (PL) shift of MoS₂ compared to that of pristine one, more interestingly, for PL peak shift, the effect of GaSe‐induced tensile strain on MoS₂ has overcome the p‐doping effect of GaSe, evidencing the strong interlayer coupling between GaSe and MoS₂. As a result, the photoresponse rate of heterostructures is improved by almost three orders of magnitude compared with that of pristine MoS₂.