High Efficiency Nonfullerene Polymer Solar Cells with Thick Active Layer and Large Area

In this work, high‐efficiency nonfullerene polymer solar cells (PSCs) are developed based on a thiazolothiazole‐containing wide bandgap polymer PTZ1 as donor and a planar IDT‐based narrow bandgap small molecule with four side chains (IDIC) as acceptor. Through thermal annealing treatment, a power conversion efficiency (PCE) of up to 11.5% with an open circuit voltage (V _oc) of 0.92 V, a short‐circuit current density (J _sc) of 16.4 mA cm^?2, and a fill factor of 76.2% is achieved. Furthermore, the PSCs based on PTZ1:IDIC still exhibit a relatively high PCE of 9.6% with the active layer thickness of 210 nm and a superior PCE of 10.5% with the device area of up to 0.81 cm². These results indicate that PTZ1 is a promising polymer donor material for highly efficient fullerene‐free PSCs and large‐scale devices fabrication.     

High‐Performance Additive‐/Post‐Treatment‐Free Nonfullerene Polymer Solar Cells via Tuning Molecular Weight of Conjugated Polymers

In recent years, rapid advances are achieved in polymer solar cells (PSCs) using nonfullerene small molecular acceptors. However, no research disclosing the influence of molecular weight (M_n) of conjugated polymer on the nonfullerene device performance is reported. In this work, a series of polymers with different M_ns are synthesized to systematically investigate the connection between M_n and performance of nonfullerene devices for the first time. It is found that the device performance improves substantially as the M_n increases from 12 to 38 kDa and a power conversion efficiency (PCE) as high as 10.5% is realized. It has to be noted this PCE is achieved without using any additives and post‐treatments, which is among the top efficiencies of additive‐ and post‐treatment‐free PSCs. Most importantly, the variation trend of the optimal active layer thickness and morphology is significantly different from the device with fullerene as acceptor. The findings clarify the effect of M_n on the performance of nonfullerene PSCs, which would benefit further efficiency improvement of nonfullerene PSCs.     

High‐Performance As‐Cast Nonfullerene Polymer Solar Cells with Thicker Active Layer and Large Area Exceeding 11% Power Conversion Efficiency

In this work, a nonfullerene polymer solar cell (PSC) based on a wide bandgap polymer donor PM6 containing fluorinated thienyl benzodithiophene (BDT‐2F) unit and a narrow bandgap small molecule acceptor 2,2′‐((2Z,2′Z)‐((4,4,9,9‐tetrahexyl‐4,9‐dihydro‐s‐indaceno[1,2‐b:5,6‐b′]dithiophene‐2,7‐diyl)bis(methanylylidene))bis(3‐oxo‐2,3‐dihydro‐1H‐indene‐2,1‐diylidene))dimalononitrile (IDIC) is developed. In addition to matched energy levels and complementary absorption spectrum with IDIC, PM6 possesses high crystallinity and strong π–π stacking alignment, which are favorable to charge carrier transport and hence suppress recombination in devices. As a result, the PM6:IDIC‐based PSCs without extra treatments show an outstanding power conversion efficiency (PCE) of 11.9%, which is the record value for the as‐cast PSC devices reported in the literature to date. Moreover, the device performances are insensitive to the active layer thickness (≈95–255 nm) and device area (0.20–0.81 cm²) with PCEs of over 11%. Besides, the PM6:IDIC‐based flexible PSCs with a large device area of 1.25 cm² exhibit a high PCE of 6.54%. These results indicate that the PM6:IDIC blend is a promising candidate for future roll‐to‐roll mass manufacturing and practical application of highly efficient PSCs.     

Highly Efficient Nonfullerene Polymer Solar Cells Enabled by a Copper(I) Coordination Strategy Employing a 1,3,4‐Oxadiazole‐Containing Wide‐Bandgap Copolymer Donor

A novel wide‐bandgap copolymer of PBDT‐ODZ based on benzo[1,2‐b:4,5‐b′ ]dithiophene (BDT) and 1,3,4‐oxadiazole (ODZ) blocks is developed for efficient nonfullerene polymer solar cells (NF‐PSCs). PBDT‐ODZ exhibits a wide bandgap of 2.12 eV and a low‐lying highest occupied molecular orbital (HOMO) level of ?5.68 eV, which could match well with the low‐bandgap acceptor of 3,9‐bis(2‐methylene‐(3‐(1,1‐dicyanomethylene)‐indanone)‐5,5,11,11‐tetrakis(4‐hexylthienyl)‐dithieno[2,3‐d:2′,3′‐d′]‐s‐indaceno[1,2‐b:5,6‐b′]‐dithiophene (ITIC‐Th), inducing a good complementary absorption from 300 to 800 nm and a minimal HOMO level offset (0.1 eV). The PBDT‐ODZ:ITIC‐Th devices exhibit a large open‐circuit voltage (V_oc) of 1.08 eV and a low energy loss (E_loss) of 0.50 eV, delivering a high power conversion efficiency (PCE) of 10.12%. By adding a small amount of copper(I) iodide (CuI) as an additive to form coordination complexes in the active blends, much higher device performances are achieved due to the improved absorption and crystallinity. After incorporating 4% of CuI, the PCE is elevated to 12.34%, with a V_oc of 1.06 V, a J_sc of 17.1 mA cm^?2 and a fill factor of 68.1%. This work not only provides a novel oxadiazole‐containing wide‐bandgap polymeric donor candidate for high‐performance NF‐PSCs but also presents an efficient morphology‐optimization approach to elevate the PCE of NF‐PSCs for future practical applications.     

Achieving Fast Charge Separation and Low Nonradiative Recombination Loss by Rational Fluorination for High‐Efficiency Polymer Solar Cells

Four low‐cost copolymer donors of poly(thiophene‐quinoxaline) (PTQ) derivatives are demonstrated with different fluorine substitution forms to investigate the effect of fluorination forms on charge separation and voltage loss (V_loss) of the polymer solar cells (PSCs) with the PTQ derivatives as donor and a A–DA'D–A‐structured molecule Y6 as acceptor. The four PTQ derivatives are PTQ7 without fluorination, PTQ8 with bifluorine substituents on its thiophene D‐unit, PTQ9, and PTQ10 with monofluorine and bifluorine substituents on their quinoxaline A‐unit respectively. The PTQ8‐ based PSC demonstrates a low power conversion efficiency (PCE) of 0.90% due to the mismatch in the highest occupied molecular orbital (HOMO) energy levels alignment between the donor and acceptor. In contrast, the devices based on PTQ9 and PTQ10 show enhanced charge‐separation behavior and gradually reduced V_loss, due to the gradually reduced nonradiative recombination loss in comparison with the PTQ7‐based device. As a result, the PTQ10‐based PSC demonstrates an impressive PCE of 16.21% with high open‐circuit voltage and large short‐circuit current density simultaneously, and its V_loss is reduced to 0.549 V. The results indicate that rational fluorination of the polymer donors is a feasible method to achieve fast charge separation and low V_loss simultaneously in the PSCs.     

Conjugated Polymer Photovoltaic Materials with Broad Absorption Band and High Charge Carrier Mobility

Polymer solar cells (PSCs) have attracted great attention in recent years because of their advantages of easy fabrication, low cost, light weight, and potential for flexible devices. However, the power conversion efficiency (PCE) of the PSCs needs to be improved for future commercial applications. Factors limiting the PCE of the PSCs include the low exploitation of sunlight due to the narrow absorption band of conjugated polymers, and the low charge‐transport efficiency in the devices due to the lower charge‐carrier mobility of the polymer photovoltaic materials. In this Research News article, recent progress in new conjugated polymer photovoltaic materials fabricated by our group and others is reviewed, including polythiophene (PT) and poly(thienylene vinylene) derivatives with conjugated side chains for a broad absorption band, crosslinked PT derivatives with conjugated bridges for higher hole mobility, and low‐bandgap donor–acceptor copolymers for broad, red‐shifted absorption to match the solar spectrum.     

Fine‐Tuning of Molecular Packing and Energy Level through Methyl Substitution Enabling Excellent Small Molecule Acceptors for Nonfullerene Polymer Solar Cells with Efficiency up to 12.54%

A novel small molecule acceptor MeIC with a methylated end‐capping group is developed. Compared to unmethylated counterparts (ITCPTC), MeIC exhibits a higher lowest unoccupied molecular orbital (LUMO) level value, tighter molecular packing, better crystallites quality, and stronger absorption in the range of 520–740 nm. The MeIC‐based polymer solar cells (PSCs) with J71 as donor, achieve high power conversion efficiency (PCE), up to 12.54% with a short‐circuit current (J_SC) of 18.41 mA cm^?2, significantly higher than that of the device based on J71:ITCPTC (11.63% with a J_SC of 17.52 mA cm^?2). The higher J_SC of the PSC based on J71:MeIC can be attributed to more balanced μ_h/μ_e, higher charge dissociation and charge collection efficiency, better molecular packing, and more proper phase separation features as indicated by grazing incident X‐ray diffraction and resonant soft X‐ray scattering results. It is worth mentioning that the as‐cast PSCs based on MeIC also yield a high PCE of 11.26%, which is among the highest value for the as‐cast nonfullerene PSCs so far. Such a small modification that leads to so significant an improvement of the photovoltaic performance is a quite exciting finding, shining a light on the molecular design of the nonfullerene acceptors.     

Aromatic‐Diimide‐Based n‐Type Conjugated Polymers for All‐Polymer Solar Cell Applications

All‐polymer solar cells (all‐PSCs) have attracted immense attention in recent years due to their advantages of tunable absorption spectra and electronic energy levels for both donor and acceptor polymers, as well as their superior thermal and mechanical stability. The exploration of the novel n‐type conjugated polymers (CPs), especially based on aromatic diimide (ADI), plays a vital role in the further improvement of power conversion efficiency (PCE) of all‐PSCs. Here, recent progress in structure modification of ADIs including naphthalene diimide (NDI), perylene diimide (PDI), and corresponding derivatives is reviewed, and the structure–property relationships of ADI‐based CPs are revealed.     

Toward Efficient Polymer Solar Cells Processed by a Solution‐Processed Layer‐By‐Layer Approach

The solution‐processed layer‐by‐layer (LBL) method has potential to achieve high‐performance polymer solar cells (PSCs) due to its advantage of enriching donors near the anode and acceptors near the cathode. However, power conversion efficiencies (PCEs) of the LBL‐PSCs are still significantly lower than those of conventional one‐step‐processed PSCs (OS‐PSCs). A method to solve the critical problems in LBL‐PSCs is reported here. By employing a specific mixed solvent (o‐dichlorobenzene [o‐DCB]/tetrahydrofuran) to spin‐coat the small‐molecular acceptor IT‐4F onto a layer of the newly designed polymer donor (PBDB‐TFS1), appropriate interdiffusion between the PBDB‐TFS1 and the IT‐4F can critically be controlled, and then an ideal phase separation of the active layer and large donor/acceptor interface area can be realized with a certain amount of o‐DCB. The PSCs based on the LBL method exhibit PCEs as high as 13.0%, higher than that of the counterpart (11.8%) made by the conventional OS solution method. This preliminary work reveals that the LBL method is a promising approach to the promotion of the photovoltaic performance of polymer solar cells.     

A Porphyrin‐Based Conjugated Polymer for Highly Efficient In Vitro and In Vivo Photothermal Therapy

Conjugated polymers have been increasingly studied for photothermal therapy (PTT) because of their merits including large absorption coefficient, facile tuning of exciton energy dissipation through nonradiative decay, and good therapeutic efficacy. The high photothermal conversion efficiency (PCE) is the key to realize efficient PTT. Herein, a donor–acceptor (D–A) structured porphyrin‐containing conjugated polymer (PorCP) is reported for efficient PTT in vitro and in vivo. The D–A structure introduces intramolecular charge transfer along the backbone, resulting in redshifted Q band, broadened absorption, and increased extinction coefficient as compared to the state‐of‐art porphyrin‐based photothermal reagent. Through nanoencapsulation, the dense packing of a large number of PorCP molecules in a single nanoparticle (NP) leads to favorable nonradiative decay, good photostability, and high extinction coefficient of 4.23 × 10⁴m ^?1 cm^?1 at 800 nm based on porphyrin molar concentration and the highest PCE of 63.8% among conjugated polymer NPs. With the aid of coloaded fluorescent conjugated polymer, the cellular uptake and distribution of the PorCP in vitro can be clearly visualized, which also shows effective photothermal tumor ablation in vitro and in vivo. This research indicates a new design route of conjugated polymer‐based photothermal therapeutic materials for potential personalized theranostic nanomedicine.     

All‐Polymer Solar Cells Based on a Conjugated Polymer Containing Siloxane‐Functionalized Side Chains with Efficiency over 10%

A novel wide‐bandgap conjugated copolymer based on an imide‐functionalized benzotriazole building block containing a siloxane‐terminated side‐chain is developed. This copolymer is successfully used to fabricate highly efficient all‐polymer solar cells (all‐PSCs) processed at room temperature with the green‐solvent 2‐methyl‐tetrahydrofuran. When paired with a naphthalene diimide‐based polymer electron‐acceptor, the all‐PSC exhibits a maximum power conversion efficiency (PCE) of 10.1%, which is the highest value so far reported for an all‐PSC. Of particular interest is that the PCE remains 9.4% after thermal annealing at 80 °C for 24 h. The resulting high efficiency is attributed to a combination of high and balanced bulky charge carrier mobility, favorable face‐on orientation, and high crystallinity. These observations indicate that the resulting copolymer can be a promising candidate toward high‐performance all‐PSCs for practical applications.     

Improved Charge Transport and Reduced Nonradiative Energy Loss Enable Over 16% Efficiency in Ternary Polymer Solar Cells

Recent advances in the material design and synthesis of nonfullerene acceptors (NFAs) have revealed a new landscape for polymer solar cells (PSCs) and have boosted the power conversion efficiencies (PCEs) to over 15%. Further improvements of the photovoltaic performance are a significant challenge in NFA‐PSCs based on binary donor:acceptor blends. In this study, ternary PSCs are fabricated by incorporating a fullerene derivative, PC₆₁BM, into a combination of a polymer donor (PBDB‐TF) and a fused‐ring NFA (Y6) and a very high PCE of 16.5% (certified as 16.2%) is recorded. Detailed studies suggest that the loading of PC₆₁BM into the PBDB‐TF:Y6 blend can not only enhance the electron mobility but also can increase the electroluminescence quantum efficiency, leading to balanced charge transport and reduced nonradiative energy losses simultaneously. This work suggests that utilizing the complementary advantages of fullerene and NFAs is a promising way to finely tune the detailed photovoltaic parameters and further improve the PCEs of PSCs.     

An Alkylated Indacenodithieno[3,2‐b]thiophene‐Based Nonfullerene Acceptor with High Crystallinity Exhibiting Single Junction Solar Cell Efficiencies Greater than 13% with Low Voltage Losses

A new synthetic route, to prepare an alkylated indacenodithieno[3,2‐b]thiophene‐based nonfullerene acceptor (C8‐ITIC), is reported. Compared to the reported ITIC with phenylalkyl side chains, the new acceptor C8‐ITIC exhibits a reduction in the optical band gap, higher absorptivity, and an increased propensity to crystallize. Accordingly, blends with the donor polymer PBDB‐T exhibit a power conversion efficiency (PCE) up to 12.4%. Further improvements in efficiency are found upon backbone fluorination of the donor polymer to afford the novel material PFBDB‐T. The resulting blend with C8‐ITIC shows an impressive PCE up to 13.2% as a result of the higher open‐circuit voltage. Electroluminescence studies demonstrate that backbone fluorination reduces the energy loss of the blends, with PFBDB‐T/C8‐ITIC‐based cells exhibiting a small energy loss of 0.6 eV combined with a high J_SC of 19.6 mA cm^?2.     

Side Chain Engineering on Medium Bandgap Copolymers to Suppress Triplet Formation for High‐Efficiency Polymer Solar Cells

Suppression of carrier recombination is critically important in realizing high‐efficiency polymer solar cells. Herein, it is demonstrated difluoro‐substitution of thiophene conjugated side chain on donor polymer can suppress triplet formation for reducing carrier recombination. A new medium bandgap 2D‐conjugated D–A copolymer J91 is designed and synthesized with bi(alkyl‐difluorothienyl)‐benzodithiophene as donor unit and fluorobenzotriazole as acceptor unit, for taking the advantages of the synergistic fluorination on the backbone and thiophene side chain. J91 demonstrates enhanced absorption, low‐lying highest occupied molecular orbital energy level, and higher hole mobility, in comparison with its control polymer J52 without fluorination on the thiophene side chains. The transient absorption spectra indicate that J91 can suppress the triplet formation in its blend film with n‐type organic semiconductor acceptor m ‐ITIC (3,9‐bis(2‐methylene‐(3‐(1,1‐dicyanomethylene)‐indanone)‐5,5,11,11‐tetrakis(3‐hexylphenyl)‐dithieno[2,3‐d:2,3′‐d′]‐s‐indaceno[1,2‐b:5,6‐b′]‐dithiophene). With these favorable properties, a higher power conversion efficiency of 11.63% with high V _OC of 0.984 V and high J _SC of 18.03 mA cm^?2 is obtained for the polymer solar cells based on J91 /m ‐ITIC with thermal annealing. The improved photovoltaic performance by thermal annealing is explained from the morphology change upon thermal annealing as revealed by photoinduced force microscopy. The results indicate that side chain engineering can provide a new solution to suppress carrier recombination toward high efficiency, thus deserves further attention.     

A Narrow‐Bandgap n‐Type Polymer Semiconductor Enabling Efficient All‐Polymer Solar Cells

Currently, n‐type acceptors in high‐performance all‐polymer solar cells (all‐PSCs) are dominated by imide‐functionalized polymers, which typically show medium bandgap. Herein, a novel narrow‐bandgap polymer, poly(5,6‐dicyano‐2,1,3‐benzothiadiazole‐alt‐indacenodithiophene) (DCNBT‐IDT), based on dicyanobenzothiadiazole without an imide group is reported. The strong electron‐withdrawing cyano functionality enables DCNBT‐IDT with n‐type character and, more importantly, alleviates the steric hindrance associated with typical imide groups. Compared to the benchmark poly(naphthalene diimide‐alt‐bithiophene) (N2200), DCNBT‐IDT shows a narrower bandgap (1.43 eV) with a much higher absorption coefficient (6.15 × 10⁴ cm^?1). Such properties are elusive for polymer acceptors to date, eradicating the drawbacks inherited in N2200 and other high‐performance polymer acceptors. When blended with a wide‐bandgap polymer donor, the DCNBT‐IDT‐based all‐PSCs achieve a remarkable power conversion efficiency of 8.32% with a small energy loss of 0.53 eV and a photoresponse of up to 870 nm. Such efficiency greatly outperforms those of N2200 (6.13%) and the naphthalene diimide (NDI)‐based analog NDI‐IDT (2.19%). This work breaks the long‐standing bottlenecks limiting materials innovation of n‐type polymers, which paves a new avenue for developing polymer acceptors with improved optoelectronic properties and heralds a brighter future of all‐PSCs.     

Highly Efficient Ternary‐Blend Polymer Solar Cells Enabled by a Nonfullerene Acceptor and Two Polymer Donors with a Broad Composition Tolerance

In this work, highly efficient ternary‐blend organic solar cells (TB‐OSCs) are reported based on a low‐bandgap copolymer of PTB7‐Th, a medium‐bandgap copolymer of PBDB‐T, and a wide‐bandgap small molecule of SFBRCN. The ternary‐blend layer exhibits a good complementary absorption in the range of 300–800 nm, in which PTB7‐Th and PBDB‐T have excellent miscibility with each other and a desirable phase separation with SFBRCN. In such devices, there exist multiple energy transfer pathways from PBDB‐T to PTB7‐Th, and from SFBRCN to the above two polymer donors. The hole‐back transfer from PTB7‐Th to PBDB‐T and multiple electron transfers between the acceptor and the donor materials are also observed for elevating the whole device performance. After systematically optimizing the weight ratio of PBDB‐T:PTB7‐Th:SFBRCN, a champion power conversion efficiency (PCE) of 12.27% is finally achieved with an open‐circuit voltage (V _oc) of 0.93 V, a short‐circuit current density (J _sc) of 17.86 mA cm^?2, and a fill factor of 73.9%, which is the highest value for the ternary OSCs reported so far. Importantly, the TB‐OSCs exhibit a broad composition tolerance with a high PCE over 10% throughout the whole blend ratios.     

Single‐Junction Binary‐Blend Nonfullerene Polymer Solar Cells with 12.1% Efficiency

A new fluorinated nonfullerene acceptor, ITIC‐Th1, has been designed and synthesized by introducing fluorine (F) atoms onto the end‐capping group 1,1‐dicyanomethylene‐3‐indanone (IC). On the one hand, incorporation of F would improve intramolecular interaction, enhance the push–pull effect between the donor unit indacenodithieno[3,2‐b]thiophene and the acceptor unit IC due to electron‐withdrawing effect of F, and finally adjust energy levels and reduce bandgap, which is beneficial to light harvesting and enhancing short‐circuit current density (J _SC). On the other hand, incorporation of F would improve intermolecular interactions through C? F···S, C? F···H, and C? F···π noncovalent interactions and enhance electron mobility, which is beneficial to enhancing J _SC and fill factor. Indeed, the results show that fluorinated ITIC‐Th1 exhibits redshifted absorption, smaller optical bandgap, and higher electron mobility than the nonfluorinated ITIC‐Th. Furthermore, nonfullerene organic solar cells (OSCs) based on fluorinated ITIC‐Th1 electron acceptor and a wide‐bandgap polymer donor FTAZ based on benzodithiophene and benzotriazole exhibit power conversion efficiency (PCE) as high as 12.1%, significantly higher than that of nonfluorinated ITIC‐Th (8.88%). The PCE of 12.1% is the highest in fullerene and nonfullerene‐based single‐junction binary‐blend OSCs. Moreover, the OSCs based on FTAZ:ITIC‐Th1 show much better efficiency and better stability than the control devices based on FTAZ:PC₇₁BM (PCE = 5.22%).     

A Chemically Doped Naphthalenediimide‐Bithiazole Polymer for n‐Type Organic Thermoelectrics

The synthesis of a novel naphthalenediimide (NDI)‐bithiazole (Tz2)‐based polymer [P(NDI2OD‐Tz2)] is reported, and structural, thin‐film morphological, as well as charge transport and thermoelectric properties are compared to the parent and widely investigated NDI‐bithiophene (T2) polymer [P(NDI2OD‐T2)]. Since the steric repulsions in Tz2 are far lower than in T2, P(NDI2OD‐Tz2) exhibits a more planar and rigid backbone, enhancing π–π chain stacking and intermolecular interactions. In addition, the electron‐deficient nature of Tz2 enhances the polymer electron affinity, thus reducing the polymer donor–acceptor character. When n‐doped with amines, P(NDI2OD‐Tz2) achieves electrical conductivity (≈0.1 S cm^?1) and a power factor (1.5 µW m^?1 K^?2) far greater than those of P(NDI2OD‐T2) (0.003 S cm^?1 and 0.012 µW m^?1 K^?2, respectively). These results demonstrate that planarized NDI‐based polymers with reduced donor–acceptor character can achieve substantial electrical conductivity and thermoelectric response.     

Recent Advances in n‐Type Polymers for All‐Polymer Solar Cells

All‐polymer solar cells (all‐PSCs) based on n‐ and p‐type polymers have emerged as promising alternatives to fullerene‐based solar cells due to their unique advantages such as good chemical and electronic adjustability, and better thermal and photochemical stabilities. Rapid advances have been made in the development of n‐type polymers consisting of various electron acceptor units for all‐PSCs. So far, more than 200 n‐type polymer acceptors have been reported. In the last seven years, the power conversion efficiency (PCE) of all‐PSCs rapidly increased and has now surpassed 10%, meaning they are approaching the performance of state‐of‐the‐art solar cells using fullerene derivatives as acceptors. This review discusses the design criteria, synthesis, and structure–property relationships of n‐type polymers that have been used in all‐PSCs. Additionally, it highlights the recent progress toward photovoltaic performance enhancement of binary, ternary, and tandem all‐PSCs. Finally, the challenges and prospects for further development of all‐PSCs are briefly considered.     

Conjugated Donor–Acceptor Terpolymers Toward High‐Efficiency Polymer Solar Cells

The development of conjugated alternating donor–acceptor (D–A) copolymers with various electron‐rich and electron‐deficient units in polymer backbones has boosted the power conversion efficiency (PCE) over 17% for polymer solar cells (PSCs) over the past two decades. However, further enhancements in PCEs for PSCs are still imperative to compensate their imperfect stability for fulfilling practical applications. Meanwhile development of these alternating D–A copolymers is highly demanding in creative design and syntheses of novel D and/or A monomers. In this regard, when being possible to adopt an existing monomer unit as a third component from its libraries, either a D′ unit or an A′ moiety, to the parent D–A type polymer backbones to afford conjugated D–A terpolymers, it will give a facile and cost‐effective method to improve their light absorption and tune energy levels and also interchain packing synergistically. Moreover, the rationally controlled stoichiometry for these components in such terpolymers also provides access for further fine‐tuning these factors, thus resulting in high‐performance PSCs. Herein, based on their unique features, the recent progress of conjugated D–A terpolymers for efficient PSCs is reviewed and it is discussed how these factors influence their photovoltaic performance, for providing useful guidelines to design new terpolymers toward high‐efficiency PSCs.