Ternary Organic Solar Cells with Efficiency >16.5% Based on Two Compatible Nonfullerene Acceptors

A ternary structure has been demonstrated as being an effective strategy to realize high power conversion efficiency (PCE) in organic solar cells (OSCs); however, general materials selection rules still remain incompletely understood. In this work, two nonfullerene small‐molecule acceptors 3TP3T‐4F and 3TP3T‐IC are synthesized and incorporated as a third component in PM6:Y6 binary blends. The photovoltaic behaviors in the resultant ternary OSCs differ significantly, despite the comparable energy levels. It is found that incorporation of 15% 3TP3T‐4F into the PM6:Y6 blend results in facilitating exciton dissociation, increasing charge transport, and reducing trap‐assisted recombination. All these features are responsible for the enlarged PCE of 16.7% (certified as 16.2%) in the PM6:Y6:3TP3T‐4F ternary OSCs, higher than that (15.6%) in the 3TP3T‐IC containing ternary devices. The performance differences are mainly ascribed to the compatibility between the third component and the host materials. The 3TP3T‐4F guest acceptor exhibits an excellent compatibility with Y6, tending to form well‐mixed phases in the ternary blend without disrupting the favored bicontinuous transport networks, whereas 3TP3T‐IC displays a morphological incompatibility with Y6. This work highlights the importance of considering the compatibility for materials selection toward high‐efficiency ternary organic OSCs.     

Over 14% Efficiency in Organic Solar Cells Enabled by Chlorinated Nonfullerene Small‐Molecule Acceptors

To make organic solar cells (OSCs) more competitive in the diverse photovoltaic cell technologies, it is very important to demonstrate that OSCs can achieve very good efficiencies and that their cost can be reduced. Here, a pair of nonfullerene small‐molecule acceptors, IT‐2Cl and IT‐4Cl, is designed and synthesized by introducing easy‐synthesis chlorine substituents onto the indacenodithieno[3,2‐b]thiophene units. The unique feature of the large dipole moment of the C? Cl bond enhances the intermolecular charge‐transfer effect between the donor–acceptor structures, and thus expands the absorption and down shifts the molecular energy levels. Meanwhile, the introduction of C? Cl also causes more pronounced molecular stacking, which also helps to expand the absorption spectrum. Both of the designed OSCs devices based on two acceptors can deliver a power conversion efficiency (PCE) greater than 13% when blended with a polymer donor with a low‐lying highest occupied molecular orbital level. In addition, since IT‐2Cl and IT‐4Cl have very good compatibility, a ternary OSC device integrating these two acceptors is also fabricated and obtains a PCE greater than 14%. Chlorination demonstrates effective ability in enhancing the device performance and facile synthesis route, which both deserve further exploitation in the modification of photovoltaic materials.     

Recent Progress in Molecular Design of Fused Ring Electron Acceptors for Organic Solar Cells

The quest for sustainable energy sources has led to accelerated growth in research of organic solar cells (OSCs). A solution‐processed bulk‐heterojunction (BHJ) OSC generally contains a donor and expensive fullerene acceptors (FAs). The last 20 years have been devoted by the OSC community to developing donor materials, specifically low bandgap polymers, to complement FAs in BHJs. The current improvement from ≈2.5% in 2013 to 17.3% in 2018 in OSC performance is primarily credited to novel nonfullerene acceptors (NFA), especially fused ring electron acceptors (FREAs). FREAs offer unique advantages over FAs, like broad absorption of solar radiation, and they can be extensively chemically manipulated to tune optoelectronic and morphological properties. Herein, the current status in FREA‐based OSCs is summarized, such as design strategies for both wide and narrow bandgap FREAs for BHJ, all‐small‐molecule OSCs, semi‐transparent OSC, ternary, and tandem solar cells. The photovoltaics parameters for FREAs are summarized and discussed. The focus is on the various FREA structures and their role in optical and morphological tuning. Besides, the advantages and drawbacks of both FAs and NFAs are discussed. Finally, an outlook in the field of FREA‐OSCs for future material design and challenges ahead is provided.     

Efficient Organic Solar Cells with Non‐Fullerene Acceptors

Fullerene‐free OSCs employing n‐type small molecules or polymers as the acceptors have recently experienced a rapid rise with efficiencies exceeding 12%. Owing to the good optoelectronic and morphological tunabilities, non‐fullerene acceptors exhibit great potential for realizing high‐performance and practical OSCs. In this Review, recent exciting progress made in developing highly efficient non‐fullerene acceptors is summarized, mainly correlating factors like absorption, energy loss and morphology of new materials to their correspondent photovoltaic performance.     

Efficient Semitransparent Organic Solar Cells with Tunable Color enabled by an Ultralow‐Bandgap Nonfullerene Acceptor

Semitransparent organic solar cells (OSCs) show attractive potential in power‐generating windows. However, the development of semitransparent OSCs is lagging behind opaque OSCs. Here, an ultralow‐bandgap nonfullerene acceptor, “IEICO‐4Cl”, is designed and synthesized, whose absorption spectrum is mainly located in the near‐infrared region. When IEICO‐4Cl is blended with different polymer donors (J52, PBDB‐T, and PTB7‐Th), the colors of the blend films can be tuned from purple to blue to cyan, respectively. Traditional OSCs with a nontransparent Al electrode fabricated by J52:IEICO‐4Cl, PBDB‐T:IEICO‐4Cl, and PTB7‐Th:IEICO‐4Cl yield power conversion efficiencies (PCE) of 9.65 ± 0.33%, 9.43 ± 0.13%, and 10.0 ± 0.2%, respectively. By using 15 nm Au as the electrode, semitransparent OSCs based on these three blends also show PCEs of 6.37%, 6.24%, and 6.97% with high average visible transmittance (AVT) of 35.1%, 35.7%, and 33.5%, respectively. Furthermore, via changing the thickness of Au in the OSCs, the relationship between the transmittance and efficiency is studied in detail, and an impressive PCE of 8.38% with an AVT of 25.7% is obtained, which is an outstanding value in the semitransparent OSCs.     

Over 15.7% Efficiency of Ternary Organic Solar Cells by Employing Two Compatible Acceptors with Similar LUMO Levels

Efficient organic solar cells (OSCs) are fabricated using polymer PM6 as donor, and IPTBO‐4Cl and MF1 as acceptors. The power conversion efficiency (PCE) of IPTBO‐4Cl based and MF1 based binary OSCs individually arrive to 14.94% and 12.07%, exhibiting markedly different short circuit current density (J_SC) of 23.18 mA cm^?2 versus 17.01 mA cm^?2, fill factor (FF) of 72.17% versus 78.18% and similar open circuit voltage (V_OC) of 0.893 V versus 0.908 V. The two acceptors, IPTBO‐4Cl and MF1, have similar lowest unoccupied molecular orbital levels, which is beneficial for efficient electron transport in the ternary active layer. The PCE of optimized ternary OSCs arrives to 15.74% by incorporating 30 wt% MF1 in acceptors, resulting from the simultaneously increased J_SC of 23.20 mA cm^?2, V_OC of 0.897 V, and FF of 75.64% in comparison with IPTBO‐4Cl based binary OSCs. The gradually increased FFs of ternary OSCs indicate the well‐optimized phase separation and molecular arrangement with MF1 as morphology regulator. This work may provide a new viewpoint for selecting an appropriate third component to achieve efficient ternary OSCs from materials and photovoltaic parameters of two binary OSCs.     

Morphology Control Enables Efficient Ternary Organic Solar Cells

Ternary organic solar cells are promising alternatives to the binary counterpart due to their potential in achieving high performance. Although a growing number of ternary organic solar cells are recently reported, less effort is devoted to morphology control. Here, ternary organic solar cells are fabricated using a wide‐bandgap polymer PBT1‐C as the donor, a crystalline fused‐ring electron acceptor ITIC‐2Cl, and an amorphous fullerene derivative indene‐C₆₀ bisadduct (ICBA) as the acceptor. It is found that ICBA can disturb π–π interactions of the crystalline ITIC‐2Cl molecules in ternary blends and then help to form more uniform morphology. As a result, incorporation of 20% ICBA in the PBT1‐C:ITIC‐2Cl blend enables efficient charge dissociation, negligible bimolecular recombination, and balanced charge carrier mobilities. An impressive power conversion efficiency (PCE) of 13.4%, with a high fill factor (FF) of 76.8%, is eventually achieved, which represents one of the highest PCEs reported so far for organic solar cells. The results manifest that the adoption of amorphous fullerene acceptor is an effective approach to optimizing the ternary blend morphology and thereby increases the solar cell performance.     

A Tandem Organic Solar Cell with PCE of 14.52% Employing Subcells with the Same Polymer Donor and Two Absorption Complementary Acceptors

The tandem structure is an efficient way to simultaneously tackle absorption and thermalization losses of the single junction solar cells. In this work, a high‐performance tandem organic solar cell (OSC) using two subcells with the same donor poly[(2,6‐(4,8‐bis(5‐(2‐ethylhexyl)thiophen‐2‐yl)‐benzo[1,2‐b:4,5‐b′]dithiophene))‐alt‐(5,5‐(1′,3′‐di‐2‐thienyl‐5′,7′‐bis(2‐ethylhexyl)benzo[1′,2′‐c:4′,5′‐c′]dithiophene‐4,8‐dione))] (PBDB‐T) and two acceptors, F‐M and 2,9‐bis(2‐methylene‐(3(1,1‐dicyanomethylene)benz[f ]indanone))7,12‐dihydro‐(4,4,10,10‐tetrakis(4‐hexylphenyl)‐5,11‐diocthylthieno[3′,2′:4,5]cyclopenta[1,2‐b]thieno[2″,3″:3′,4′]cyclopenta[1′,2′:4,5]thieno[2,3‐f][1]benzothiophene (NNBDT), with complementary absorptions is demonstrated. The two subcells show high V_oc with value of 0.99 V for the front cell and 0.86 V for the rear cell, which is the prerequisite for obtaining high V_oc of their series‐connected tandem device. Although there is much absorption overlap for the subcells, a decent J_sc of the tandem cell is still obtained owing to the complementary absorption of the two acceptors in a wide range. With systematic device optimizations, a best power conversion efficiency of 14.52% is achieved for the tandem device, with a high V_oc of 1.82 V, a notable FF of 74.7%, and a decent J_sc of 10.68 mA cm^?2. This work demonstrates a promising strategy of fabricating high‐efficiency tandem OSCs through elaborate selection of the active layer materials in each subcell and tradeoff of the V_oc and J_sc of the tandem cells.     

Highly Efficient Ternary‐Blend Polymer Solar Cells Enabled by a Nonfullerene Acceptor and Two Polymer Donors with a Broad Composition Tolerance

In this work, highly efficient ternary‐blend organic solar cells (TB‐OSCs) are reported based on a low‐bandgap copolymer of PTB7‐Th, a medium‐bandgap copolymer of PBDB‐T, and a wide‐bandgap small molecule of SFBRCN. The ternary‐blend layer exhibits a good complementary absorption in the range of 300–800 nm, in which PTB7‐Th and PBDB‐T have excellent miscibility with each other and a desirable phase separation with SFBRCN. In such devices, there exist multiple energy transfer pathways from PBDB‐T to PTB7‐Th, and from SFBRCN to the above two polymer donors. The hole‐back transfer from PTB7‐Th to PBDB‐T and multiple electron transfers between the acceptor and the donor materials are also observed for elevating the whole device performance. After systematically optimizing the weight ratio of PBDB‐T:PTB7‐Th:SFBRCN, a champion power conversion efficiency (PCE) of 12.27% is finally achieved with an open‐circuit voltage (V _oc) of 0.93 V, a short‐circuit current density (J _sc) of 17.86 mA cm^?2, and a fill factor of 73.9%, which is the highest value for the ternary OSCs reported so far. Importantly, the TB‐OSCs exhibit a broad composition tolerance with a high PCE over 10% throughout the whole blend ratios.     

Fused‐Ring Acceptors with Asymmetric Side Chains for High‐Performance Thick‐Film Organic Solar Cells

A kind of new fused‐ring electron acceptor, IDT‐OB, bearing asymmetric side chains, is synthesized for high‐efficiency thick‐film organic solar cells. The introduction of asymmetric side chains can increase the solubility of acceptor molecules, enable the acceptor molecules to pack closely in a dislocated way, and form favorable phase separation when blended with PBDB‐T. As expected, PBDB‐T:IDT‐OB‐based devices exhibit high and balanced hole and electron mobility and give a high power conversion efficiency (PCE) of 10.12%. More importantly, the IDT‐OB‐based devices are not very sensitive to the film thickness, a PCE of 9.17% can still be obtained even the thickness of active layer is up to 210 nm.     

Improved Domain Size and Purity Enables Efficient All‐Small‐Molecule Ternary Solar Cells

An all‐small‐molecule ternary solar cell is achieved with a power conversion efficiency of 10.48% by incorporating phenyl‐C₇₁‐butyric‐acid‐methyl ester (PC₇₁BM) into a nonfullerene binary system. The addition of PC₇₁BM is found to modulate the film morphology by improving the domain purity and decreasing the domain size. This modulation facilitates charge generation and suppresses charge recombination, as manifested by the significantly enhanced short‐circuit current density and fill factor. The results correlate the domain characteristics with the device performance and offer new insight from the perspective of morphology modulation for constructing efficient ternary devices.     

An Efficient, “Burn in” Free Organic Solar Cell Employing a Nonfullerene Electron Acceptor

A comparison of the efficiency, stability, and photophysics of organic solar cells employing poly[(5,6‐difluoro‐2,1,3‐benzothiadiazol‐4,7‐diyl)‐alt‐(3,3′″‐di(2‐octyldodecyl)‐2,2′;5′,2″;5″,2′″‐quaterthiophen‐5,5′″‐diyl)] (PffBT4T‐2OD) as a donor polymer blended with either the nonfullerene acceptor EH‐IDTBR or the fullerene derivative, [6,6]‐phenyl C₇₁ butyric acid methyl ester (PC₇₁BM) as electron acceptors is reported. Inverted PffBT4T‐2OD:EH‐IDTBR blend solar cell fabricated without any processing additive achieves power conversion efficiencies (PCEs) of 9.5 ± 0.2%. The devices exhibit a high open circuit voltage of 1.08 ± 0.01 V, attributed to the high lowest unoccupied molecular orbital (LUMO) level of EH‐IDTBR. Photoluminescence quenching and transient absorption data are employed to elucidate the ultrafast kinetics and efficiencies of charge separation in both blends, with PffBT4T‐2OD exciton diffusion kinetics within polymer domains, and geminate recombination losses following exciton separation being identified as key factors determining the efficiency of photocurrent generation. Remarkably, while encapsulated PffBT4T‐2OD:PC₇₁BM solar cells show significant efficiency loss under simulated solar irradiation (“burn in” degradation) due to the trap‐assisted recombination through increased photoinduced trap states, PffBT4T‐2OD:EH‐IDTBR solar cell shows negligible burn in efficiency loss. Furthermore, PffBT4T‐2OD:EH‐IDTBR solar cells are found to be substantially more stable under 85 °C thermal stress than PffBT4T‐2OD:PC₇₁BM devices.     

Nonfullerene Tandem Organic Solar Cells with High Performance of 14.11%

Fabricating solar cells with tandem structure is an efficient way to broaden the photon response range without further increasing the thermalization loss in the system. In this work, a tandem organic solar cell (TOSC) based on highly efficient nonfullerene acceptors (NFAs) with series connection type is demonstrated. To meet the different demands of front and rear sub‐cells, two NFAs named F‐M and NOBDT with a whole absorption range from 300 to 900 nm are designed, when blended with wide bandgap polymer poly[(2,6‐(4,8‐bis(5‐(2‐ethylhexyl)thiophen‐2‐yl)‐benzo[1,2‐b:4,5‐b′]dithiophene))‐alt‐(5,5‐(1′,3′‐di‐2‐thienyl‐5′,7′‐bis(2‐ethylhexyl)benzo[1′,2′‐c:4′,5′‐c′]dithiophene‐4,8‐dione))] (PBDB‐T) and narrow bandgap polymer PTB7‐Th, respectively, the PBDB‐T: F‐M system exhibits a high V_oc of 0.98 V and the PTB7‐Th: NOBDT system shows a remarkable J_sc of 19.16 mA cm^?2, which demonstrate their potential in the TOSCs. With the guidance of optical simulation, by systematically optimizing the thickness of each layer in the TOSC, an outstanding power conversion efficiency of 14.11%, with a V_oc of 1.71 V, a J_sc of 11.72 mA cm^?2, and a satisfactory fill factor of 0.70 is achieved; this result is one of the top efficiencies reported to date in the field of organic solar cells.     

Unraveling the Microstructure-Related Device Stability for Polymer Solar Cells Based on Nonfullerene Small-Molecular Acceptors

As the power conversion efficiency (PCE) of organic solar cells (OSCs) has surpassed the 17% baseline, the long-term stability of highly efficient OSCs is essential for the practical application of this photovoltaic technology. Here, the photostability and possible degradation mechanisms of three state-of-the-art polymer donors with a commonly used nonfullerene acceptor (NFA), IT-4F, are investigated. The active-layer materials show excellent intrinsic photostability. The initial morphology, in particular the mixed region, causes degradation predominantly in the fill factor (FF) under illumination. Electron traps are formed due to the reorganization of polymers and diffusion-limited aggregation of NFAs to assemble small isolated acceptor domains under illumination. These electron traps lead to losses mainly in FF, which is in contradistinction to the degradation mechanisms observed for fullerene-based OSCs. Control of the composition of NFAs close to the thermodynamic equilibrium limit while keeping adequate electron percolation and improving the initial polymer and NFA ordering are of the essence to stabilize the FF in NFA-based solar cells, which may be the key tactics to develop next-generation OSCs with high efficiency as well as excellent stability.