A SERS‐Assisted 3D Barcode Chip for High‐Throughput Biosensing

A surface enhanced Raman scattering (SERS)‐assisted 3D barcode chip has been developed for high‐throughput biosensing. The 3D barcode is realized through joint 2D spatial encoding with the Raman spectroscopic encoding, which stores the SERS fingerprint information in the format of a 2D array. Here, the concept of SERS‐assisted 3D barcode is demonstrated through multiplex immunoassay, where simultaneous detection of multiple targets in different samples has been achieved using a microfluidic platform. First, multiple proteins in different samples are spatially separated using a microfluidic patterned antibody barcode substrate, forming a 2D hybridization array. Then the SERS probes are used to identify and quantify the proteins. As different SERS probes are labeled with different Raman reporters, they could be employed as “SERS tags” to incorporate spectroscopic information into the 3D barcode. In this 3D barcode, the 2D spatial information helps to differentiate the samples and targets while the SERS information allows quantitative multiplex detection. It is found that the SERS‐assisted 3D barcode chip can not only accomplish one‐step multiplex detection within 30 min but also achieve an ultrasensitivity down to 10 fg mL^?1 (≈70 aM), which is expected to provide a promising tool for high‐throughput biomedical applications.     

An Adaptive Real‐Time 3D Single Particle Tracking Method for Monitoring Viral First Contacts

Here, an adaptive real‐time 3D single particle tracking method is proposed, which is capable of capturing heterogeneous dynamics. Using a real‐time measurement of a rapidly diffusing particle's positional variance, the 3D precision adaptive real‐time tracking (3D‐PART) microscope adjusts active‐feedback parameters to trade tracking speed for precision on demand. This technique is demonstrated first on immobilized fluorescent nanoparticles, with a greater than twofold increase in the lateral localization precision (≈25 to ≈11 nm at 1 ms sampling) as well as a smaller increase in the axial localization precision (≈ 68 to ≈45 nm). 3D‐PART also shows a marked increase in the precision when tracking freely diffusing particles, with lateral precision increasing from ≈100 to ≈70 nm for particles diffusing at 4 µm² s^?1, although with a sacrifice in the axial precision (≈250 to ≈350 nm). This adaptive microscope is then applied to monitoring the viral first contacts of virus‐like particles to the surface of live cells, allowing direct and continuous measurement of the viral particle at initial contact with the cell surface.     

Rapid Production of Cell‐Laden Microspheres Using a Flexible Microfluidic Encapsulation Platform

This study establishes a novel microfluidic platform for rapid encapsulation of cells at high densities in photocrosslinkable microspherical hydrogels including poly(ethylene glycol)‐diacrylate, poly(ethylene glycol)‐fibrinogen, and gelatin methacrylate. Cell‐laden hydrogel microspheres are advantageous for many applications from drug screening to regenerative medicine. Employing microfluidic systems is considered the most efficient method for scale‐up production of uniform microspheres. However, existing platforms have been constrained by traditional microfabrication techniques for device fabrication, restricting microsphere diameter to below 200 µm and making iterative design changes time‐consuming and costly. Using a new molding technique, the microfluidic device employs a modified T‐junction design with readily adjustable channel sizes, enabling production of highly uniform microspheres with cell densities (10–60 million cells mL^?1) and a wide range of diameters (300–1100 µm), which are critical for realizing downstream applications, through rapid photocrosslinking (≈1 s per microsphere). Multiple cell types are encapsulated at rates of up to 1 million cells per min, are evenly distributed throughout the microspheres, and maintain high viability and appropriate cellular activities in long‐term culture. This microfluidic encapsulation platform is a valuable and readily adoptable tool for numerous applications, including supporting injectable cell therapy, bioreactor‐based cell expansion and differentiation, and high throughput tissue sphere‐based drug testing assays.     

Bioinspired,Spine‐Like,Flexible, Rechargeable Lithium‐Ion Batteries with High Energy Density

The rapid development of flexible and wearable electronics proposes the persistent requirements of high‐performance flexible batteries. Much progress has been achieved recently, but how to obtain remarkable flexibility and high energy density simultaneously remains a great challenge. Here, a facile and scalable approach to fabricate spine‐like flexible lithium‐ion batteries is reported. A thick, rigid segment to store energy through winding the electrodes corresponds to the vertebra of animals, while a thin, unwound, and flexible part acts as marrow to interconnect all vertebra‐like stacks together, providing excellent flexibility for the whole battery. As the volume of the rigid electrode part is significantly larger than the flexible interconnection, the energy density of such a flexible battery can be over 85% of that in conventional packing. A nonoptimized flexible cell with an energy density of 242 Wh L^?1 is demonstrated with packaging considered, which is 86.1% of a standard prismatic cell using the same components. The cell also successfully survives a harsh dynamic mechanical load test due to this rational bioinspired design. Mechanical simulation results uncover the underlying mechanism: the maximum strain in the reported design (≈0.08%) is markedly smaller than traditional stacked cells (≈1.1%). This new approach offers great promise for applications in flexible devices.     

A Solution‐Processable,Omnidirectionally Stretchable,and High‐Pressure‐Sensitive Piezoresistive Device

The development of omnidirectionally stretchable pressure sensors with high performance without stretching‐induced interference has been hampered by many challenges. Herein, an omnidirectionally stretchable piezoresistive pressure‐sensing device is demonstrated by combining an omniaxially stretchable substrate with a 3D micropattern array and solution‐printing of electrode and piezoresistive materials. A unique substrate structural design and materials mean that devices that are highly sensitive are rendered, with a stable out‐of‐plane pressure response to both static (sensitivity of 0.5 kPa^?1 and limit of detection of 28 Pa) and dynamic pressures and the minimized in‐plane stretching responsiveness (a small strain gauge factor of 0.17), achieved through efficient strain absorption of the electrode and sensing materials. The device can detect human‐body tremors, as well as measure the relative elastic properties of human skin. The omnidirectionally stretchable pressure sensor with a high pressure sensitivity and minimal stretch‐responsiveness yields great potential to skin‐attachable wearable electronics, human–machine interfaces, and soft robotics applications.     

Magnesium Storage Performance and Mechanism of 2D‐Ultrathin Nanosheet‐Assembled Spinel MgIn2S4 Cathode for High‐Temperature Mg Batteries

Magnesium batteries have the potential to be a next generation battery with large capability and high safety, owing to the high abundance, great volumetric energy density, and reversible dendrite‐free capability of Mg anodes. However, the lack of a stable high‐voltage electrolyte, and the sluggish Mg‐ion diffusion in lattices and through interfaces limit the practical uses of Mg batteries. Herein, a spinel MgIn₂S₄ microflower‐like material assembled by 2D‐ultrathin (≈5.0 nm) nanosheets is reported and first used as a cathode material for high‐temperature Mg batteries with an ionic liquid electrolyte. The nonflammable ionic liquid electrolyte ensure the safety under high temperatures. As prepared MgIn₂S₄ exhibits wide‐temperature‐range adaptability (50–150 °C), ultrahigh capacity (≈500 mAh g^?1 under 1.2 V vs Mg/Mg²⁺), fast Mg²⁺ diffusibility (≈2.0 × 10^?8 cm² s^?1), and excellent cyclability (without capacity decay after 450 cycles). These excellent electrochemical properties are due to the fast kinetics of magnesium by the 2D nanosheets spinel structure and safe high‐temperature operation environment. From ex situ X‐ray diffraction and transmission electron microscopy measurements, a conversion reaction of the Mg²⁺ storage mechanism is found. The excellent performance and superior security make it promising in high‐temperature batteries for practical applications.     

In‐Plane Direct‐Write Assembly of Iridescent Colloidal Crystals

Materials made by directed self‐assembly of colloids can exhibit a rich spectrum of optical phenomena, including photonic bandgaps, coherent scattering, collective plasmonic resonance, and wave guiding. The assembly of colloidal particles with spatial selectivity is critical for studying these phenomena and for practical device fabrication. While there are well‐established techniques for patterning colloidal crystals, these often require multiple steps including the fabrication of a physical template for masking, etching, stamping, or directing dewetting. Here, the direct‐writing of colloidal suspensions is presented as a technique for fabrication of iridescent colloidal crystals in arbitrary 2D patterns. Leveraging the principles of convective assembly, the process can be optimized for high writing speeds (≈600 µm s^?1) at mild process temperature (30 °C) while maintaining long‐range (cm‐scale) order in the colloidal crystals. The crystals exhibit structural color by grating diffraction, and analysis of diffraction allows particle size, relative grain size, and grain orientation to be deduced. The effect of write trajectory on particle ordering is discussed and insights for developing 3D printing techniques for colloidal crystals via layer‐wise printing and sintering are provided.     

Microfluidics‐Enabled Multimaterial Maskless Stereolithographic Bioprinting

A stereolithography‐based bioprinting platform for multimaterial fabrication of heterogeneous hydrogel constructs is presented. Dynamic patterning by a digital micromirror device, synchronized by a moving stage and a microfluidic device containing four on/off pneumatic valves, is used to create 3D constructs. The novel microfluidic device is capable of fast switching between different (cell‐loaded) hydrogel bioinks, to achieve layer‐by‐layer multimaterial bioprinting. Compared to conventional stereolithography‐based bioprinters, the system provides the unique advantage of multimaterial fabrication capability at high spatial resolution. To demonstrate the multimaterial capacity of this system, a variety of hydrogel constructs are generated, including those based on poly(ethylene glycol) diacrylate (PEGDA) and gelatin methacryloyl (GelMA). The biocompatibility of this system is validated by introducing cell‐laden GelMA into the microfluidic device and fabricating cellularized constructs. A pattern of a PEGDA frame and three different concentrations of GelMA, loaded with vascular endothelial growth factor, are further assessed for its neovascularization potential in a rat model. The proposed system provides a robust platform for bioprinting of high‐fidelity multimaterial microstructures on demand for applications in tissue engineering, regenerative medicine, and biosensing, which are otherwise not readily achievable at high speed with conventional stereolithographic biofabrication platforms.     

High‐Performance Flexible Organic Nano‐Floating Gate Memory Devices Functionalized with Cobalt Ferrite Nanoparticles

Nano‐floating gate memory (NFGM) devices are transistor‐type memory devices that use nanostructured materials as charge trap sites. They have recently attracted a great deal of attention due to their excellent performance, capability for multilevel programming, and suitability as platforms for integrated circuits. Herein, novel NFGM devices have been fabricated using semiconducting cobalt ferrite (CoFe₂O₄) nanoparticles (NPs) as charge trap sites and pentacene as a p‐type semiconductor. Monodisperse CoFe₂O₄ NPs with different diameters have been synthesized by thermal decomposition and embedded in NFGM devices. The particle size effects on the memory performance have been investigated in terms of energy levels and particle–particle interactions. CoFe₂O₄ NP‐based memory devices exhibit a large memory window (≈73.84 V), a high read current on/off ratio (read I_on/I_off) of ≈2.98 × 10³_, and excellent data retention. Fast switching behaviors are observed due to the exceptional charge trapping/release capability of CoFe₂O₄ NPs surrounded by the oleate layer, which acts as an alternative tunneling dielectric layer and simplifies the device fabrication process. Furthermore, the NFGM devices show excellent thermal stability, and flexible memory devices fabricated on plastic substrates exhibit remarkable mechanical and electrical stability. This study demonstrates a viable means of fabricating highly flexible, high‐performance organic memory devices.     

Advection Flows‐Enhanced Magnetic Separation for High‐Throughput Bacteria Separation from Undiluted Whole Blood

A major challenge to scale up a microfluidic magnetic separator for extracorporeal blood cleansing applications is to overcome low magnetic drag velocity caused by viscous blood components interfering with magnetophoresis. Therefore, there is an unmet need to develop an effective method to position magnetic particles to the area of augmented magnetic flux density gradients while retaining clinically applicable throughput. Here, a magnetophoretic cell separation device, integrated with slanted ridge‐arrays in a microfluidic channel, is reported. The slanted ridges patterned in the microfluidic channels generate spiral flows along the microfluidic channel. The cells bound with magnetic particles follow trajectories of the spiral streamlines and are repeatedly transferred in a transverse direction toward the area adjacent to a ferromagnetic nickel structure, where they are exposed to a highly augmented magnetic force of 7.68 µN that is much greater than the force (0.35 pN) at the side of the channel furthest from the nickel structure. With this approach, 91.68% ± 2.18% of Escherichia coli (E. coli) bound with magnetic nanoparticles are successfully separated from undiluted whole blood at a flow rate of 0.6 mL h^?1 in a single microfluidic channel, whereas only 23.98% ± 6.59% of E. coli are depleted in the conventional microfluidic device.     

A Highly Sensitive Single Crystal Perovskite–Graphene Hybrid Vertical Photodetector

Organolead trihalide perovskites have attracted significant attention for optoelectronic applications due to their excellent physical properties in the past decade. Generally, both grain boundaries in perovskite films and the device structure play key roles in determining the device performance, especially for horizontal‐structured device. Here, the first optimized vertical‐structured photodetector with the perovskite single crystal MAPbBr₃ as the light absorber and graphene as the transport layer is shown. The hybrid device combines strong photoabsorption characteristics of perovskite and high carrier mobility of flexible graphene, exhibits excellent photoresponse performance with high photoresponsivity (≈1017.1 A W^?1) and high photodetectivity (≈2.02 × 10¹³ Jones) in a low light intensity (0.66 mW cm^?2) under the actuations of 3 V bias and laser irradiation at 532 nm. In particular, an ultrahigh photoconductive gain of ≈2.37 × 10³ is attained because of fast charge transfer in the graphene and large recombination lifetime in the perovskite single crystal. The vertical architecture combining perovskite crystal with highly conductive graphene offers opportunities to fulfill the synergistic effect of perovskite and 2D materials, is thus promising for developing high‐performance electronic and optoelectronic devices.     

A Solution‐Processed High‐Performance Phototransistor based on a Perovskite Composite with Chemically Modified Graphenes

Phototransistors with a structure of a nitrogen‐doped graphene quantum dots (NGQDs)–perovskite composite layer and a mildly reduced graphene oxide (mrGO) layer are fabricated through a solution‐processing method. This hybrid phototransistor exhibits broad detection range (from 365 to 940 nm), high photoresponsivity (1.92 × 10⁴ A W^?1), and rapid response to light on–off (≈10 ms). NGQDs offer an effective and fast path for electron transfer from the perovskite to the mrGO, resulting in the improvement of photocurrent and photoswitching characteristics. The high photoresponsivity can also be ascribed to a photogating effect in the device. In addition, the phototransistor shows good stability with poly(methyl methacrylate) encapsulation, and can maintain 85% of its initial performance for 20 d in ambient air.     

One‐Way Particle Transport Using Oscillatory Flow in Asymmetric Traps

One challenge of integrating of passive, microparticles manipulation techniques into multifunctional microfluidic devices is coupling the continuous‐flow format of most systems with the often batch‐type operation of particle separation systems. Here, a passive fluidic technique—one‐way particle transport—that can conduct microparticle operations in a closed fluidic circuit is presented. Exploiting pass/capture interactions between microparticles and asymmetric traps, this technique accomplishes a net displacement of particles in an oscillatory flow field. One‐way particle transport is achieved through four kinds of trap–particle interactions: mechanical capture of the particle, asymmetric interactions between the trap and the particle, physical collision of the particle with an obstacle, and lateral shift of the particle into a particle–trapping stream. The critical dimensions for those four conditions are found by numerically solving analytical mass balance equations formulated using the characteristics of the flow field in periodic obstacle arrays. Visual observation of experimental trap–particle dynamics in low Reynolds number flow (<0.01) confirms the validity of the theoretical predictions. This technique can transport hundreds of microparticles across trap rows in only a few fluid oscillations (<500 ms per oscillation) and separate particles by their size differences.     

Massively Multiplexed Submicron Particle Patterning in Acoustically Driven Oscillating Nanocavities

Nanoacoustic fields are a promising method for particle actuation at the nanoscale, though THz frequencies are typically required to create nanoscale wavelengths. In this work, the generation of robust nanoscale force gradients is demonstrated using MHz driving frequencies via acoustic‐structure interactions. A structured elastic layer at the interface between a microfluidic channel and a traveling surface acoustic wave (SAW) device results in submicron acoustic traps, each of which can trap individual submicron particles. The acoustically driven deformation of nanocavities gives rise to time‐averaged acoustic fields which direct suspended particles toward, and trap them within, the nanocavities. The use of SAWs permits massively multiplexed particle manipulation with deterministic patterning at the single‐particle level. In this work, 300 nm diameter particles are acoustically trapped in 500 nm diameter cavities using traveling SAWs with wavelengths in the range of 20–80 µm with one particle per cavity. On‐demand generation of nanoscale acoustic force gradients has wide applications in nanoparticle manipulation, including bioparticle enrichment and enhanced catalytic reactions for industrial applications.     

High‐Performance Solution‐Processed Organo‐Metal Halide Perovskite Unipolar Resistive Memory Devices in a Cross‐Bar Array Structure

Resistive random access memories can potentially open a niche area in memory technology applications by combining the advantages of the long endurance of dynamic random‐access memory and the long retention time of flash memories. Recently, resistive memory devices based on organo‐metal halide perovskite materials have demonstrated outstanding memory properties, such as a low‐voltage operation and a high ON/OFF ratio; such properties are essential requirements for low power consumption in developing practical memory devices. In this study, a nonhalide lead source is employed to deposit perovskite films via a simple single‐step spin‐coating method for fabricating unipolar resistive memory devices in a cross‐bar array architecture. These unipolar perovskite memory devices achieve a high ON/OFF ratio up to 10⁸ with a relatively low operation voltage, a large endurance, and long retention times. The high‐yield device fabrication based on the solution‐process demonstrated here will be a step toward achieving low‐cost and high‐density practical perovskite memory devices.     

High‐Performance Photoinduced Memory with Ultrafast Charge Transfer Based on MoS2/SWCNTs Network Van Der Waals Heterostructure

Photoinduced memory devices with fast program/erase operations are crucial for modern communication technology, especially for high‐throughput data storage and transfer. Although some photoinduced memories based on 2D materials have already demonstrated desirable performance, the program/erase speed is still limited to hundreds of micro‐seconds. A high‐speed photoinduced memory based on MoS₂/single‐walled carbon nanotubes (SWCNTs) network mixed‐dimensional van der Waals heterostructure is demonstrated here. An intrinsic ultrafast charge transfer occurs at the heterostructure interface between MoS₂ and SWCNTs (below 50 fs), therefore enabling a record program/erase speed of ≈32/0.4 ms, which is faster than that of the previous reports. Furthermore, benefiting from the unique device structure and material properties, while achieving high‐speed program/erase operation, the device can simultaneously obtain high program/erase ratio (≈10⁶), appropriate storage time (≈10³ s), record‐breaking detectivity (≈10¹⁶ Jones) and multibit storage capacity with a simple program/erase operation. It even has a potential application as a flexible optoelectronic device. Therefore, the designed concept here opens an avenue for high‐throughput fast data communications.     

Solution‐Processed Wide‐Bandgap Organic Semiconductor Nanostructures Arrays for Nonvolatile Organic Field‐Effect Transistor Memory

In this paper, the development of organic field‐effect transistor (OFET) memory device based on isolated and ordered nanostructures (NSs) arrays of wide‐bandgap (WBG) small‐molecule organic semiconductor material [2‐(9‐(4‐(octyloxy)phenyl)‐9H‐fluoren‐2‐yl)thiophene]3 (WG₃) is reported. The WG₃ NSs are prepared from phase separation by spin‐coating blend solutions of WG₃/trimethylolpropane (TMP), and then introduced as charge storage elements for nonvolatile OFET memory devices. Compared to the OFET memory device with smooth WG₃ film, the device based on WG₃ NSs arrays exhibits significant improvements in memory performance including larger memory window (≈45 V), faster switching speed (≈1 s), stable retention capability (>10⁴ s), and reliable switching properties. A quantitative study of the WG₃ NSs morphology reveals that enhanced memory performance is attributed to the improved charge trapping/charge‐exciton annihilation efficiency induced by increased contact area between the WG₃ NSs and pentacene layer. This versatile solution‐processing approach to preparing WG₃ NSs arrays as charge trapping sites allows for fabrication of high‐performance nonvolatile OFET memory devices, which could be applicable to a wide range of WBG organic semiconductor materials.     

Receptor‐Mediated Cellular Uptake of Folate‐Conjugated Fluorescent Nanodiamonds: A Combined Ensemble and Single‐Particle Study

Fluorescent nanodiamonds (FNDs) are nontoxic and photostable nanomaterials, ideal for long‐term in vivo imaging applications. This paper reports that FNDs with a size of ≈140 nm can be covalently conjugated with folic acid (FA) for receptor‐mediated targeting of cancer cells at the single‐particle level. The conjugation is made by using biocompatible polymers, such as polyethylene glycol, as crosslinked buffer layers. Ensemble‐averaged measurements with flow cytometry indicate that more than 50% of the FA‐conjugated FND particles can be internalized by the cells (such as HeLa cells) through receptor‐mediated endocytosis, as confirmed by competitive inhibition assays. Confocal fluorescence microscopy reveals that these FND particles accumulate in the perinuclear region. The absolute number of FNDs internalized by HeLa cells after 3 h of incubation at a particle concentration of 10 µg mL^?1 is in the range of 100 particles per cell. The receptor‐mediated uptake process is further elucidated by single‐particle tracking of 35‐nm FNDs in three dimensions and real time during the endocytosis.     

Optically Coated Mirror‐Embedded Microchannel to Measure Hydrophoretic Particle Ordering in Three Dimensions

Three‐dimensional (3D) measurement of the behavior of microfluidic particles is vital for improving their operational efficiency and characterization. In particular, it is important to measure particle motions in 3D for exact characterization of hydrophoresis, which utilizes 3D convective flows for size separation. Herein, the 3D measurement of hydrophoretic particle ordering for the exact characterization of hydrophoresis by using an optically coated mirror‐embedded microchannel is reported. The mirror, ideally at 45°, reflects the side view of the channel and enables 3D positional information to be obtained easily from two different orthogonal‐axis images. With this method, it is shown that hydrophoresis is governed by convective vortices and steric hindrance. It is also observed that hydrophoresis enables 3D particle focusing without sheath flows and accurate flow‐rate control. The mechanism of hydrophoresis is finally verified by conducting a computational simulation and comparing the simulation results with the experimental measurements. The hydrophoretic method can be straightforwardly integrated as a 3D particle‐focusing component in integrated microfluidic systems. The mirror‐embedded channel can also be readily fabricated in a single cast of polydimethylsiloxane, thus offering low‐cost, easy implementation of 3D particle measurement.     

High Throughput‐Per‐Footprint Inertial Focusing

Matching the scale of microfluidic flow systems with that of microelectronic chips for realizing monolithically integrated systems still needs to be accomplished. However, this is appealing only if such re‐scaling does not compromise the fluidic throughput. This is related to the fact that the cost of microelectronic circuits primarily depends on the layout footprint, while the performance of many microfluidic systems, like flow cytometers, is measured by the throughput. The simple operation of inertial particle focusing makes it a promising technique for use in such integrated flow cytometer applications, however, microfluidic footprints demonstrated so far preclude monolithic integration. Here, the scaling limits of throughput‐per‐footprint (TPFP) in using inertial focusing are explored by studying the interplay between theory, the effect of channel Reynolds numbers up to 1500 on focusing, the entry length for the laminar flow to develop, and pressure resistance of the microchannels. Inertial particle focusing is demonstrated with a TPFP up to 0.3 L/(min cm²) in high aspect‐ratio rectangular microfluidic channels that are readily fabricated with a post‐CMOS integratable process, suggesting at least a 100‐fold improvement compared to previously demonstrated techniques. Not only can this be an enabling technology for realizing cost‐effective monolithically integrated flow cytometry devices, but the methodology represented here can also open perspectives for miniaturization of many biomedical microfluidic applications requiring monolithic integration with microelectronics without compromising the throughput.