3D Sulfur and Nitrogen Codoped Carbon Nanofiber Aerogels with Optimized Electronic Structure and Enlarged Interlayer Spacing Boost Potassium‐Ion Storage

Carbonaceous materials are promising anodes for potassium‐ion batteries (PIBs). However, it is hard for large K ions (1.38 Å) to achieve long‐distance diffusion in pristine carbonaceous materials. In this work, the following are synthesized: S/N codoped carbon nanofiber aerogels (S/N‐CNFAs) with optimized electronic structure by S/N codoping, enhanced interlayer spacing by S doping, and a 3D interconnected porous structure of aerogel, through a pyrolysis sustainable seaweed (Fe‐alginate) aerogel strategy. Specifically, the S/N‐CNFAs electrode delivers high reversible capacities of 356 and 112 mA h g^?1 at 100 and 5000 mA g^?1, respectively. The capacity reaches 168 mA h g^?1 at 2000 mA g^?1 after 1000 cycles. A full cell with a S/N‐CNFAs anode and potassium prussian blue cathode displays a specific capacity of 198 mA h g^?1 at 200 mA g^?1. Density functional theory calculations indicate that S/N codoping is beneficial to synergistically improve K ions storage of S/N‐CNFAs by enhancing the adsorption of K ions and reducing the diffusion barrier of K ions. This work offers a facile heteroatom doping paradigm for designing new carbonaceous anodes for high‐performance PIBs.     

Tailoring Highly N‐Doped Carbon Materials from Hexamine‐Based MOFs: Superior Performance and New Insight into the Roles of N Configurations in Na‐Ion Storage

To prepare highly N‐doped carbon materials (HNCs) as well as to determine the influence of N dopants on Na‐ion storage performance, hexamine‐based metal–organic frameworks are employed as new and efficient precursors in the preparation of HNCs. The HNCs possess reversible capacities as high as 160 and 142 mA h g^?1 at 2 A g^?1 (≈8 C) and 5 A g^?1 (≈20 C), respectively, and maintain values of 145 and 123 mA h g^?1 after 500 cycles, thus exhibiting excellent rate and long‐term cyclic performance. Based on systematic analysis, a new insight into the roles of the different N configurations in Na‐ion storage is proposed. The adsorption of Na ions on pyridinic‐N (N‐6) and pyrrolic‐N (N‐5) is fully irreversible, whereas the adsorption on graphitic‐N (N‐Q) is partially reversible and the adsorption on N‐oxide (N‐O) is fully reversible. More importantly, the N‐6/N‐Q ratio is an intrinsic parameter that reflects the relationship between the N configurations and carbon textures for N‐doped carbons prepared from in situ pyrolysis of organic precursors. The cyclic stability and rate‐performance improve with decreasing N‐6/N‐Q ratio. Therefore, this work is of great significance for the design of N‐doped carbon electrodes with high performance for sodium ion batteries.     

Enhanced Capacity and Rate Capability of Nitrogen/Oxygen Dual‐Doped Hard Carbon in Capacitive Potassium‐Ion Storage

The intercalation of potassium ions into graphite is demonstrated to be feasible, while the electrochemical performance of potassium‐ion batteries (KIBs) remains unsatisfying. More effort is needed to improve the specific capacity while maintaining a superior rate capability. As an attempt, nitrogen/oxygen dual‐doped hierarchical porous hard carbon (NOHPHC) is introduced as the anode in KIBs by carbonizing and acidizing the NH₂‐MIL‐101(Al) precursor. Specifically, the NOHPHC electrode delivers high reversible capacities of 365 and 118 mA h g^?1 at 25 and 3000 mA g^?1, respectively. The capacity retention reaches 69.5% at 1050 mA g^?1 for 1100 cycles. The reasons for the enhanced electrochemical performance, such as the high capacity, good cycling stability, and superior rate capability, are analyzed qualitatively and quantitatively. Quantitative analysis reveals that mixed mechanisms, including capacitance and diffusion, account for the K‐ion storage, in which the capacitance plays a more important role. Specifically, the enhanced interlayer spacing (0.39 nm) enables the intercalation of large K ions, while the high specific surface area of ≈1030 m² g^?1 and the dual‐heteroatom doping (N and O) are conducive to the reversible adsorption of K ions.     

Flexible Membrane Consisting of MoP Ultrafine Nanoparticles Highly Distributed Inside N and P Codoped Carbon Nanofibers as High‐Performance Anode for Potassium‐Ion Batteries

Rechargeable potassium‐ion batteries (PIBs) have attracted tremendous attention as potential electrical energy storage systems due to the special merit of abundant resources and low cost of potassium. However, one critical barrier to achieve practical application of PIBs has been the lack of suitable electrode materials. Here, a novel flexible membrane consisting of N, P codoped carbon nanofibers decorated with MoP ultrafine nanoparticles (MoP@NPCNFs) is fabricated via a simple electrospinning method combined with the later carbonization and phosphorization process. The 3D porous CNF structure in the as‐synthesized composite can shorten the transport pathways of K‐ions and improve the conductivity of electrons. The ultrafine MoP nanoparticles can guarantee high specific capacity and the N, P co‐doping could improve wettability of electrodes to electrolytes. As expected, the free‐standing MoP@NPCNF electrode demonstrates a high capacity of 320 mAh g^?1 at 100 mA g^?1, a superior rate capability maintaining 220 mAh g^?1 at 2 A g^?1, as well as a capacity retention of more than 90% even after 200 cycles. The excellent rate performance, high reversible capacity, long‐term cycling stability, and facile synthesis routine make this hybrid membrane promising anode for potassium‐ion batteries.     

Reactive Oxygen‐Doped 3D Interdigital Carbonaceous Materials for Li and Na Ion Batteries

Carbonaceous materials as anodes usually exhibit low capacity for lithium ion batteries (LIBs) and sodium ion batteries (SIBs). Oxygen‐doped carbonaceous materials have the potential of high capacity and super rate performance. However, up to now, the reported oxygen‐doped carbonaceous materials usually exhibit inferior electrochemical performance. To overcome this problem, a high reactive oxygen‐doped 3D interdigital porous carbonaceous material is designed and synthesized through epitaxial growth method and used as anodes for LIBs and SIBs. It delivers high reversible capacity, super rate performance, and long cycling stability (473 mA h g^?1after 500 cycles for LIBs and 223 mA h g^?1 after 1200 cycles for SIBs, respectively, at the current density of 1000 mA g^?1), with a capacity decay of 0.0214% per cycle for LIBs and 0.0155% per cycle for SIBs. The results demonstrate that constructing 3D interdigital porous structure with reactive oxygen functional groups can significantly enhance the electrochemical performance of oxygen‐doped carbonaceous material.     

Superior Sodium Storage in 3D Interconnected Nitrogen and Oxygen Dual‐Doped Carbon Network

Carbonaceous materials have attracted immense interest as anode materials for Na‐ion batteries (NIBs) because of their good chemical, thermal stabilities, as well as high Na‐storage capacity. However, the carbonaceous materials as anodes for NIBs still suffer from the lower rate capability and poor cycle life. An N,O‐dual doped carbon (denoted as NOC) network is designed and synthesized, which is greatly favorable for sodium storage. It exhibits high specific capacity and ultralong cycling stability, delivering a capacity of 545 mAh g^?1 at 100 mA g^?1 after 100 cycles and retaining a capacity of 240 mAh g^?1 at 2 A g^?1 after 2000 cycles. The NOC composite with 3D well‐defined porosity and N,O‐dual doped induces active sites, contributing to the enhanced sodium storage. In addition, the NOC is synthesized through a facile solution process, which can be easily extended to the preparation of many other N,O‐dual doped carbonaceous materials for wide applications in catalysis, energy storage, and solar cells.     

Confined Amorphous Red Phosphorus in MOF‐Derived N‐Doped Microporous Carbon as a Superior Anode for Sodium‐Ion Battery

Red phosphorus (P) has attracted intense attention as promising anode material for high‐energy density sodium‐ion batteries (NIBs), owing to its high sodium storage theoretical capacity (2595 mAh g^?1). Nevertheless, natural insulating property and large volume variation of red P during cycling result in extremely low electrochemical activity, leading to poor electrochemical performance. Herein, the authors demonstrate a rational strategy to improve sodium storage performance of red P by confining nanosized amorphous red P into zeolitic imidazolate framework‐8 (ZIF‐8) ‐derived nitrogen‐doped microporous carbon matrix (denoted as P@N‐MPC). When used as anode for NIBs, the P@N‐MPC composite displays a high reversible specific capacity of ≈600 mAh g^?1 at 0.15 A g^?1 and improved rate capacity (≈450 mAh g^?1 at 1 A g^?1 after 1000 cycles with an extremely low capacity fading rate of 0.02% per cycle). The superior sodium storage performance of the P@N‐MPC is mainly attributed to the novel structure. The N‐doped porous carbon with sub‐1 nm micropore facilitates the rapid diffusion of organic electrolyte ions and improves the conductivity of the encapsulated red P. Furthermore, the porous carbon matrix can buffer the volume change of red P during repeat sodiation/desodiation process, keeping the structure intact after long cycle life.     

Plasma Treatment for Nitrogen‐Doped 3D Graphene Framework by a Conductive Matrix with Sulfur for High‐Performance Li–S Batteries

Carbon materials have received considerable attention as host cathode materials for sulfur in lithium–sulfur batteries; N‐doped carbon materials show particularly high electrocatalytic activity. Efforts are made to synthesize N‐doped carbon materials by introducing nitrogen‐rich sources followed by sintering or hydrothermal processes. In the present work, an in situ hollow cathode discharge plasma treatment method is used to prepare 3D porous frameworks based on N‐doped graphene as a potential conductive matrix material. The resulting N‐doped graphene is used to prepare a 3D porous framework with a S content of 90 wt% as a cathode in lithium–sulfur cells, which delivers a specific discharge capacity of 1186 mAh g^?1 at 0.1 C, a coulombic efficiency of 96% after 200 cycles, and a capacity retention of 578 mAh g^?1 at 1.0 C after 1000 cycles. The performance is attributed to the flexible 3D structure and clustering of pyridinic N‐dopants in graphene. The N‐doped graphene shows high electrochemical performance and the flexible 3D porous stable structure accommodates the considerable volume change of the active material during lithium insertion and extraction processes, improving the long‐term electrochemical performance.     

ZIF‐8@ZIF‐67‐Derived Nitrogen‐Doped Porous Carbon Confined CoP Polyhedron Targeting Superior Potassium‐Ion Storage

Potassium ion batteries (KIB) have become a compelling energy‐storage system owing to their cost effectiveness and the high abundance of potassium in comparison with lithium. However, its practical applications have been thwarted by a series of challenges, including marked volume expansion and sluggish reaction kinetics caused by the large radius of potassium ions. In line with this, the exploration of reliable anode materials affording high electrical conductivity, sufficient active sites, and structural robustness is the key. The synthesis of ZIF‐8@ZIF‐67 derived nitrogen‐doped porous carbon confined CoP polyhedron architectures (NC@CoP/NC) to function as innovative KIB anode materials is reported. Such composites enable an outstanding rate performance to harvest a capacity of ≈200 mAh g^?1 at 2000 mA g^?1. Additionally, a high cycling stability can be gained by maintaining a high capacity retention of 93% after 100 cycles at 100 mA g^?1. Furthermore, the potassium ion storage mechanism of the NC@CoP/NC anode is systematically probed through theoretical simulations and experimental characterization. This contribution may offer an innovative and feasible route of emerging anode design toward high performance KIBs.     

Ultrathin Nitrogen‐Doped Carbon Layer Uniformly Supported on Graphene Frameworks as Ultrahigh‐Capacity Anode for Lithium‐Ion Full Battery

The designable structure with 3D structure, ultrathin 2D nanosheets, and heteroatom doping are considered as highly promising routes to improve the electrochemical performance of carbon materials as anodes for lithium‐ion batteries. However, it remains a significant challenge to efficiently integrate 3D interconnected porous frameworks with 2D tunable heteroatom‐doped ultrathin carbon layers to further boost the performance. Herein, a novel nanostructure consisting of a uniform ultrathin N‐doped carbon layer in situ coated on a 3D graphene framework (NC@GF) through solvothermal self‐assembly/polymerization and pyrolysis is reported. The NC@GF with the nanosheets thickness of 4.0 nm and N content of 4.13 at% exhibits an ultrahigh reversible capacity of 2018 mA h g^?1 at 0.5 A g^?1 and an ultrafast charge–discharge feature with a remarkable capacity of 340 mA h g^?1 at an ultrahigh current density of 40 A g^?1 and a superlong cycle life with a capacity retention of 93% after 10 000 cycles at 40 A g^?1. More importantly, when coupled with LiFePO₄ cathode, the fabricated lithium‐ion full cells also exhibit high capacity and excellent rate and cycling performances, highlighting the practicability of this NC@GF.     

Birnessite Nanosheet Arrays with High K Content as a High‐Capacity and Ultrastable Cathode for K‐Ion Batteries

Potassium‐ion batteries (PIBs) are one of the emerging energy‐storage technologies due to the low cost of potassium and theoretically high energy density. However, the development of PIBs is hindered by the poor K⁺ transport kinetics and the structural instability of the cathode materials during K⁺ intercalation/deintercalation. In this work, birnessite nanosheet arrays with high K content (K_0.77MnO₂?0.23H₂O) are prepared by “hydrothermal potassiation” as a potential cathode for PIBs, demonstrating ultrahigh reversible specific capacity of about 134 mAh g^?1 at a current density of 100 mA g^?1, as well as great rate capability (77 mAh g^?1 at 1000 mA g^?1) and superior cycling stability (80.5% capacity retention after 1000 cycles at 1000 mA g^?1). With the introduction of adequate K⁺ ions in the interlayer, the K‐birnessite exhibits highly stabilized layered structure with highly reversible structure variation upon K⁺ intercalation/deintercalation. The practical feasibility of the K‐birnessite cathode in PIBs is further demonstrated by constructing full cells with a hard–soft composite carbon anode. This study highlights effective K⁺‐intercalation for birnessite to achieve superior K‐storage performance for PIBs, making it a general strategy for developing high‐performance cathodes in rechargeable batteries beyond lithium‐ion batteries.     

Peapod‐like Li3VO4/N‐Doped Carbon Nanowires with Pseudocapacitive Properties as Advanced Materials for High‐Energy Lithium‐Ion Capacitors

Lithium ion capacitors are new energy storage devices combining the complementary features of both electric double‐layer capacitors and lithium ion batteries. A key limitation to this technology is the kinetic imbalance between the Faradaic insertion electrode and capacitive electrode. Here, we demonstrate that the Li₃VO₄ with low Li‐ion insertion voltage and fast kinetics can be favorably used for lithium ion capacitors. N‐doped carbon‐encapsulated Li₃VO₄ nanowires are synthesized through a morphology‐inheritance route, displaying a low insertion voltage between 0.2 and 1.0 V, a high reversible capacity of ≈400 mAh g^?1 at 0.1 A g^?1, excellent rate capability, and long‐term cycling stability. Benefiting from the small nanoparticles, low energy diffusion barrier and highly localized charge‐transfer, the Li₃VO₄/N‐doped carbon nanowires exhibit a high‐rate pseudocapacitive behavior. A lithium ion capacitor device based on these Li₃VO₄/N‐doped carbon nanowires delivers a high energy density of 136.4 Wh kg^?1 at a power density of 532 W kg^?1, revealing the potential for application in high‐performance and long life energy storage devices.     

Nitrogen‐Enriched Carbon/CNT Composites Based on Schiff‐Base Networks: Ultrahigh N Content and Enhanced Lithium Storage Properties

To improve the electrochemical performance of carbonaceous anodes for lithium ion batteries (LIBs), the incorporation of both well‐defined heteroatom species and the controllable 3D porous networks are urgently required. In this work, a novel N‐enriched carbon/carbon nanotube composite (NEC/CNT) through a chemically induced precursor‐controlled pyrolysis approach is developed. Instead of conventional N‐containing sources or precursors, Schiff‐base network (SNW‐1) enables the desirable combination of a 3D polymer with intrinsic microporosity and ultrahigh N‐content, which can significantly promote the fast transport of both Li⁺ and electron. Significantly, the strong interaction between carbon skeleton and nitrogen atoms enables the retention of ultrahigh N‐content up to 21 wt% in the resultant NEC/CNT, which exhibits a super‐high capacity (1050 mAh g^?1) for 1000 cycles and excellent rate performance (500 mAh g^?1 at a current density of 5 A g^?1) as the anode material for LIBs. The NEC/CNT composite affords a new model system as well as a totally different insight for deeply understanding the relationship between chemical structures and lithium ion storage properties, in which chemistry may play a more important role than previously expected.     

Ultrafast Sodium/Potassium‐Ion Intercalation into Hierarchically Porous Thin Carbon Shells

The large‐scale application of sodium/potassium‐ion batteries is severely limited by the low and slow charge storage dynamics of electrode materials. The crystalline carbons exhibit poor insertion capability of large Na⁺/K⁺ ions, which limits the storage capability of Na/K batteries. Herein, porous S and N co‐doped thin carbon (S/N@C) with shell‐like (shell size ≈20–30 nm, shell wall ≈8–10 nm) morphology for enhanced Na⁺/K⁺ storage is presented. Thanks to the hollow structure and thin shell‐wall, S/N@C exhibits an excellent Na⁺/K⁺ storage capability with fast mass transport at higher current densities, leading to limited compromise over charge storage at high charge/discharge rates. The S/N@C delivers a high reversible capacity of 448 mAh g^‐1 for Na battery, at the current density of 100 mA g^‐1 and maintains a discharge capacity up to 337 mAh g^‐1 at 1000 mA g^‐1. Owing to shortened diffusion pathways, S/N@C delivers an unprecedented discharge capacity of 204 and 169 mAh g^‐1 at extremely high current densities of 16 000 and 32 000 mA g^‐1, respectively, with excellent reversible capacity for 4500 cycles. Moreover, S/N@C exhibits high K⁺ storage capability (320 mAh g^‐1 at current density of 50 mA g^‐1) and excellent cyclic life.     

A Novel Potassium‐Ion‐Based Dual‐Ion Battery

In this work, combining both advantages of potassium‐ion batteries and dual‐ion batteries, a novel potassium‐ion‐based dual‐ion battery (named as K‐DIB) system is developed based on a potassium‐ion electrolyte, using metal foil (Sn, Pb, K, or Na) as anode and expanded graphite as cathode. When using Sn foil as the anode, the K‐DIB presents a high reversible capacity of 66 mAh g^?1 at a current density of 50 mA g^?1 over the voltage window of 3.0–5.0 V, and exhibits excellent long‐term cycling performance with 93% capacity retention for 300 cycles. Moreover, as the Sn foil simultaneously acts as the anode material and the current collector, dead load and dead volume of the battery can be greatly reduced, thus the energy density of the K‐DIB is further improved. It delivers a high energy density of 155 Wh kg^?1 at a power density of 116 W kg^?1, which is comparable with commercial lithium‐ion batteries. Thus, with the advantages of environmentally friendly, cost effective, and high energy density, this K‐DIB shows attractive potential for future energy storage application.     

N‐Doped Carbon Nanofibers with Interweaved Nanochannels for High‐Performance Sodium‐Ion Storage

Although graphite materials have been applied as commercial anodes in lithium‐ion batteries (LIBs), there still remain abundant spaces in the development of carbon‐based anode materials for sodium‐ion batteries (SIBs). Herein, an electrospinning route is reported to fabricate nitrogen‐doped carbon nanofibers with interweaved nanochannels (NCNFs‐IWNC) that contain robust interconnected 1D porous channels, produced by removal of a Te nanowire template that is coelectrospun within carbon nanofibers during the electrospinning process. The NCNFs‐IWNC features favorable properties, including a conductive 1D interconnected porous structure, a large specific surface area, expanded interlayer graphite‐like spacing, enriched N‐doped defects and active sites, toward rapid access and transport of electrolyte and electron/sodium ions. Systematic electrochemical studies indicate that the NCNFs‐IWNC exhibits an impressively high rate capability, delivering a capacity of 148 mA h g^?1 at current density of as high as 10 A g^?1, and has an attractively stable performance over 5000 cycles. The practical application of the as‐designed NCNFs‐IWNC for a full SIBs cell is further verified by coupling the NCNFs‐IWNC anode with a FeFe(CN)₆ cathode, which displays a desirable cycle performance, maintaining acapacity of 97 mA h g^?1 over 100 cycles.     

Advanced Se3P4@C Anode with Exceptional Cycling Life for High Performance Potassium‐Ion Batteries

Potassium‐ion batteries have attracted increasing attention for next‐generation energy storage systems due to their high energy density and abundance of potassium. However, the lack of suitable anode highly hampers its practical application due to the large ionic radius of K⁺. Herein, a Se₃P₄@mesoporous carbon (Se₃P₄@C) composite is reported as a high‐performance anode for potassium‐ion batteries. The Se₃P₄@C composite is synthesized through an in situ combination reaction between red phosphorus and Se within a porous carbon matrix. In this way, the nano‐sized Se₃P₄ is well confined in the porous carbon and thus exhibits a close contact with the carbon matrix. This can significantly improve the conductivity and alleviate the volume change during the cycling process. As a result, the Se₃P₄@C exhibits a high reversible initial capacity of 1036.8 mAh g^?1 at a current density of 50 mA g^?1 as well as an excellent cycle performance with a capacity decay of 0.07% per cycle over 300 cycles under 1000 mA g^?1. In terms of high specific capacity and stable cycling performance, the Se₃P₄@C anode is a promising candidate for advanced potassium‐ion batteries.     

Nitrogen and Phosphorus Codoped Vertical Graphene/Carbon Cloth as a Binder‐Free Anode for Flexible Advanced Potassium Ion Full Batteries

With the fast development in flexible electronic technology, power supply devices with high performance, low‐cost, and flexibility are becoming more and more important. Potassium ion batteries (KIBs) have a brilliant prospect for applications benefiting from high voltage, lost cost, as well as similar electrochemistry to lithium ion batteries (LIBs). Although carbon materials have been studied as KIBs anodes, their rate capability and cycling stability are still unsatisfactory due to the large‐size potassium ions. Herein, a nitrogen (N) and phosphorus (P) dual‐doped vertical graphene (N, P‐VG) uniformly grown on carbon cloth (N, P‐VG@CC) is reported as a binder‐free anode for flexible KIBs. With the combined advantages of rich active sites, highly accessible surface, highly conductive network, larger interlayer spacing as well as robust structural stability, this binder‐free N, P‐VG@CC anode exhibits high capacity (344.3 mAh g^?1), excellent rate capability (2000 mA g^?1; 46.5% capacity retention), and prominent long‐term cycling stability (1000 cycles; 82% capacity retention), outperforming most of the recently reported carbonaceous anodes. Moreover, a potassium ion full cell is successfully assembled on the basis of potassium Prussian blue (KPB)//N, P‐VG@CC, exhibiting a large energy density of 232.5 Wh kg^?1 and outstanding cycle stability.     

Controllable Interlayer Spacing of Sulfur‐Doped Graphitic Carbon Nanosheets for Fast Sodium‐Ion Batteries

The electrochemical behaviors of current graphitic carbons are seriously restricted by its low surface area and insufficient interlayer spacing for sodium‐ion batteries. Here, sulfur‐doped graphitic carbon nanosheets are reported by utilizing sodium dodecyl sulfate as sulfur resource and graphitization additive, showing a controllable interlayer spacing range from 0.38 to 0.41 nm and a high specific surface area up to 898.8 m² g^?1. The obtained carbon exhibits an extraordinary electrochemical activity for sodium‐ion storage with a large reversible capacity of 321.8 mAh g^?1 at 100 mA g^?1, which can be mainly attributed to the expanded interlayer spacing of the carbon materials resulted from the S‐doping. Impressively, superior rate capability of 161.8 mAh g^?1 is reserved at a high current density of 5 A g^?1 within 5000 cycles, which should be ascribed to the fast surface‐induced capacitive behavior derived from its high surface area. Furthermore, the storage processes are also quantitatively evaluated, confirming a mixed storage mechanism of diffusion‐controlled intercalation behavior and surface‐induced capacitive behavior. This study provides a novel route for rationally designing various carbon‐based anodes with enhanced rate capability.     

Facile Synthesis of Ultrasmall CoS2 Nanoparticles within Thin N‐Doped Porous Carbon Shell for High Performance Lithium‐Ion Batteries

Cobalt sulfide (CoS₂) is considered one of the most promising alternative anode materials for high‐performance lithium‐ion batteries (LIBs) by virtue of its remarkable electrical conductivity, high theoretical capacity, and low cost. However, it suffers from a poor cycling stability and low rate capability because of its volume expansion and dissolution of the polysulfide intermediates in the organic electrolytes during the battery charge/discharge process. In this study, a novel porous carbon/CoS₂ composite is prepared by using nano metal–organic framework (MOF) templates for high‐preformance LIBs. The as‐made ultrasmall CoS₂ (15 nm) nanoparticles in N‐rich carbon exhibit promising lithium storage properties with negligible loss of capacity at high charge/discharge rate. At a current density of 100 mA g^?1, a capacity of 560 mA h g^?1 is maintained after 50 cycles. Even at a current density as high as 2500 mA g^?1, a reversible capacity of 410 mA h g^?1 is obtained. The excellent and highly stable battery performance should be attributed to the synergism of the ultrasmall CoS₂ particles and the thin N‐rich porous carbon shells derieved from nanosized MOF precusors.