Engineering of Electronic States on Co3O4 Ultrathin Nanosheets by Cation Substitution and Anion Vacancies for Oxygen Evolution Reaction

Due to the earth abundance and tunable electronic properties, etc., transition metal oxides (TMOs) show attractive attention in oxygen evolution reaction. O‐vacancies (V_o) play important roles in tailoring the local surface and electronic environment to lower the activation barriers. Herein, an effective strategy is shown to enhance the oxygen evolution reduction (OER) performance on Co₃O₄ ultrathin nanosheets via combined cation substitution and anion vacancies. The oxygen‐deficient Fe‐Co‐O nanosheets (3–4 nm thickness) display an overpotential of 260 mV@10 mA cm^?2 and a Tafel slope of 53 mV dec^?1, outperforming those of the benchmark RuO₂ in 1.0 m KOH. Further calculations demonstrate that the combined introduction of Fe cation and V_o with appropriate location and content finely tune the intermediate absorption, consequently lowering the rate‐limiting activation energy from 0.82 to as low as 0.15 eV. The feasibility is also proved by oxygen‐deficient Ni‐Co‐O nanosheets. This work not only establishes a clear atomic‐level correlation between cation substitution, anion vacancies, and OER performance, but also provides valuable insights for the rational design of highly efficient catalysts for OER.     

Slower Removing Ligands of Metal Organic Frameworks Enables Higher Electrocatalytic Performance of Derived Nanomaterials

The widely used route of high‐temperature pyrolysis for transformation of Prussian blue analogs (PBAs) to functional nanomaterials leads to the fast removal of CN^? ligands, and thus the formation of large metal aggregates and the loss of porous structures inside PBAs. Here, a controllable pyrolysis route at low temperature is reported for retaining the confined effect of CN^? ligands to metal cations during the whole pyrolysis process, thereby preparing high‐surface‐area cubes comprising disordered bimetallic oxides (i.e., Co₃O₄ and Fe₂O₃) nanoparticles. The disordered structure of Co₃O₄ enables the exposure of abundant oxygen vacancies. Notably, for the first time, it is found that the in situ generated CoOOH during the oxygen evolution reaction (OER) can inherit the oxygen vacancies of pristine Co₃O₄ (i.e., before OER), and such CoOOH with abundant oxygen vacancies adsorbs two ^?OH in the following Co³⁺ to Co⁴⁺ for markedly promoting OER. However, during the similar step, the ordered Co₃O₄ with less oxygen vacancies only involves one ^?OH, resulting in the additional overpotentials for adsorbing ^?OH. Consequently, with high surface area and disordered Co₃O₄, the as‐synthesized electrocatalysts have a low potential of 237 mV at 10 mA cm^?2, surpassing most of reported electrocatalysts.     

Ferrocene‐Incorporated Cobalt Sulfide Nanoarchitecture for Superior Oxygen Evolution Reaction

Here, ferrocene(Fc)‐incorporated cobalt sulfide (Co_xS_y) nanostructures directly grown on carbon nanotube (CNT) or carbon fiber (CF) networks for electrochemical oxygen evolution reaction (OER) using a facile one‐step solvothermal method are reported. The strong synergistic interaction between Fc‐Co_xS_y nanostructures and electrically conductive CNTs results in the superior electrocatalytic activity with a very small overpotential of ≈304 mV at 10 mA cm^?2 and a low Tafel slope of 54.2 mV dec^?1 in 1 m KOH electrolyte. Furthermore, the Fc‐incorporated Co_xS_y (FCoS) nanostructures are directly grown on the acid pretreated carbon fiber (ACF), and the resulting fabricated electrode delivers excellent OER performance with a low overpotential of ≈315 mV at 10 mA cm^?2. Such superior OER catalytic activity can be attributed to 3D Fc‐Co_xS_y nanoarchitectures that consist of a high concentration of vertical nanosheets with uniform distribution of nanoparticles that afford a large number of active surface areas and edge sites. Besides, the tight contact interface between ACF substrate and Fc‐Co_xS_y nanostructures could effectively facilitate the electron transfer rate in the OER. This study provides valuable insights for the rational design of energy storage and conversion materials by the incorporation of other transition metal into metal sulfide/oxide nanostructures utilizing metallocene.     

Amorphous Bimetallic Oxide–Graphene Hybrids as Bifunctional Oxygen Electrocatalysts for Rechargeable Zn–Air Batteries

Metal oxides of earth‐abundant elements are promising electrocatalysts to overcome the sluggish oxygen evolution and oxygen reduction reaction (OER/ORR) in many electrochemical energy‐conversion devices. However, it is difficult to control their catalytic activity precisely. Here, a general three‐stage synthesis strategy is described to produce a family of hybrid materials comprising amorphous bimetallic oxide nanoparticles anchored on N‐doped reduced graphene oxide with simultaneous control of nanoparticle elemental composition, size, and crystallinity. Amorphous Fe_0.5Co_0.5O_x is obtained from Prussian blue analog nanocrystals, showing excellent OER activity with a Tafel slope of 30.1 mV dec^?1 and an overpotential of 257 mV for 10 mA cm^?2 and superior ORR activity with a large limiting current density of ?5.25 mA cm^?2 at 0.6 V. A fabricated Zn–air battery delivers a specific capacity of 756 mA h g_Zn^?1 (corresponding to an energy density of 904 W h kg_Zn^?1), a peak power density of 86 mW cm^?2 and can be cycled over 120 h at 10 mA cm^?2. Other two amorphous bimetallic, Ni_0.4Fe_0.6O_x and Ni_0.33Co_0.67O_x , are also produced to demonstrate the general applicability of this method for synthesizing binary metal oxides with controllable structures as electrocatalysts for energy conversion.     

Ambient Fast Synthesis and Active Sites Deciphering of Hierarchical Foam‐Like Trimetal–Organic Framework Nanostructures as a Platform for Highly Efficient Oxygen Evolution Electrocatalysis

Metal–organic frameworks (MOFs) have attracted tremendous interest due to their promising applications including electrocatalysis originating from their unique structural features. However, it remains a challenge to directly use MOFs for oxygen electrocatalysis because it is quite difficult to manipulate their dimension, composition, and morphology of the MOFs with abundant active sites. Here, a facile ambient temperature synthesis of unique NiCoFe‐based trimetallic MOF nanostructures with foam‐like architecture is reported, which exhibit extraordinary oxygen evolution reaction (OER) activity as directly used catalyst in alkaline condition. Specifically, the (Ni₂Co₁)_0.925Fe_0.075‐MOF‐NF delivers a minimum overpotential of 257 mV to reach the current density of 10 mA cm^?2 with a small Tafel slope of 41.3 mV dec^?1 and exhibits high durability after long‐term testing. More importantly, the deciphering of the possible origination of the high activity is performed through the characterization of the intermediates during the OER process, where the electrochemically transformed metal hydroxides and oxyhydroxides are confirmed as the active species.     

Ultrafine Co3O4 Nanoparticles within Nitrogen‐Doped Carbon Matrix Derived from Metal–Organic Complex for Boosting Lithium Storage and Oxygen Evolution Reaction

Transition metal oxides have recently received great attention for application in advanced lithium‐ion batteries (LIBs) and oxygen evolution reaction (OER). Herein, the ethylenediaminetetraacetic cobalt complex as a precursor to synthesize ultrafine Co₃O₄ nanoparticles encapsulated into a nitrogen‐doped carbon matrix (NC) composites is presented. The as‐prepared Co₃O₄/NC‐350 obtained by pyrolysis at 350 °C demonstrates superior rate performance (372 mAh g^?1 at 5.0 A g^?1) and high cycling stability (92% capacity retention after 300 cycles at 1.0 A g^?1) as anode for LIBs. When evaluated as an electrocatalyst for OER, the Co₃O₄/NC‐350 achieves an overpotential of 298 mV at a current density of 10 mA cm^?2. The NC‐encapsualted porous hierarchical structure assures fast and continuous electron transportation, high activity sites, and strong structural integrity. This works offers novel complex precursors for synthesizing transition metal–based electrodes for boosting electrochemical energy conversion and storage.     

Metal Atom-Doped Co3O4 Hierarchical Nanoplates for Electrocatalytic Oxygen Evolution

Electrocatalysts based on hierarchically structured and heteroatom-doped non-noble metal oxide materials are of great importance for efficient and low-cost electrochemical water splitting systems. Herein, the synthesis of a series of hierarchical hollow nanoplates (NPs) composed of ultrathin Co₃O₄ nanosheets doped with 13 different metal atoms is reported. The synthesis involves a cooperative etching−coordination−reorganization approach starting from zeolitic imidazolate framework-67 (ZIF-67) NPs. First, metal atom decorated ZIF-67 NPs with unique cross-channels are formed through a Lewis acid etching and metal species coordination process. Afterward, the composite NPs are converted to hollow Co₃O₄ hierarchical NPs composed of ultrathin nanosheets through a solvothermal reaction, during which the guest metal species is doped into the octahedral sites of Co₃O₄. Density functional theory calculations suggest that doping of small amount of Fe atoms near the surface of Co₃O₄ can greatly enhance the electrocatalytic activity toward the oxygen evolution reaction (OER). Benefiting from the structural and compositional advantages, the obtained Fe-doped Co₃O₄ hierarchical NPs manifest superior electrocatalytic performance for OER with an overpotential of 262 mV at 10 mA cm⁻², a Tafel slope of 43 mV dec⁻¹, and excellent stability even at a high current density of 100 mA cm⁻² for 50 h.     

Trifunctional Single‐Atomic Ru Sites Enable Efficient Overall Water Splitting and Oxygen Reduction in Acidic Media

Development of cost‐effective, active trifunctional catalysts for acidic oxygen reduction (ORR) as well as hydrogen and oxygen evolution reactions (HER and OER, respectively) is highly desirable, albeit challenging. Herein, single‐atomic Ru sites anchored onto Ti₃C₂T_x MXene nanosheets are first reported to serve as trifunctional electrocatalysts for simultaneously catalyzing acidic HER, OER, and ORR. A half‐wave potential of 0.80 V for ORR and small overpotentials of 290 and 70 mV for OER and HER, respectively, at 10 mA cm^?2 are achieved. Hence, a low cell voltage of 1.56 V is required for the acidic overall water splitting. The maximum power density of an H₂–O₂ fuel cell using the as‐prepared catalyst can reach as high as 941 mW cm^?2. Theoretical calculations reveal that isolated Ru–O₂ sites can effectively optimize the adsorption of reactants/intermediates and lower the energy barriers for the potential‐determining steps, thereby accelerating the HER, ORR, and OER kinetics.     

Self‐Assembled Ruddlesden–Popper/Perovskite Hybrid with Lattice‐Oxygen Activation as a Superior Oxygen Evolution Electrocatalyst

The oxygen evolution reaction (OER) is pivotal in multiple gas‐involved energy conversion technologies, such as water splitting, rechargeable metal–air batteries, and CO₂/N₂ electrolysis. Emerging anion‐redox chemistry provides exciting opportunities for boosting catalytic activity, and thus mastering lattice‐oxygen activation of metal oxides and identifying the origins are crucial for the development of advanced catalysts. Here, a strategy to activate surface lattice‐oxygen sites for OER catalysis via constructing a Ruddlesden–Popper/perovskite hybrid, which is prepared by a facile one‐pot self‐assembly method, is developed. As a proof‐of‐concept, the unique hybrid catalyst (RP/P‐LSCF) consists of a dominated Ruddlesden–Popper phase LaSr₃Co_1.5Fe_1.5O_10‐δ (RP‐LSCF) and second perovskite phase La_0.25Sr_0.75Co_0.5Fe_0.5O_3‐δ (P‐LSCF), displaying exceptional OER activity. The RP/P‐LSCF achieves 10 mA cm^?2 at a low overpotential of only 324 mV in 0.1 m KOH, surpassing the benchmark RuO₂ and various state‐of‐the‐art metal oxides ever reported for OER, while showing significantly higher activity and stability than single RP‐LSCF oxide. The high catalytic performance for RP/P‐LSCF is attributed to the strong metal–oxygen covalency and high oxygen‐ion diffusion rate resulting from the phase mixture, which likely triggers the surface lattice‐oxygen activation to participate in OER. The success of Ruddlesden–Popper/perovskite hybrid construction creates a new direction to design advanced catalysts for various energy applications.     

2D Electron Gas and Oxygen Vacancy Induced High Oxygen Evolution Performances for Advanced Co3O4/CeO2 Nanohybrids

The rational design of atomic‐scale interfaces in multiphase nanohybrids is an alluring and challenging approach to develop advanced electrocatalysts. Herein, through the selection of two different metal oxides with particular intrinsic features, advanced Co₃O₄/CeO₂ nanohybrids (NHs) with CeO₂ nanocubes anchored on Co₃O₄ nanosheets are developed, which show not only high oxygen vacancy concentration but also remarkable 2D electron gas (2DEG) behavior with ≈0.79 ± 0.1 excess e^?/u.c. on the Ce³⁺ sites at the Co₃O₄–CeO₂ interface. Such a 2DEG transport channel leads to a high carrier density of 3.8 × 10¹⁴ cm^?2 and good conductivity. Consequently, the Co₃O₄/CeO₂ NHs demonstrate dramatically enhanced oxygen evolution reaction (OER) performances with a low overpotential of 270 mV at 10 mA cm^?2 and a high turnover frequency of 0.25 s^?1 when compared to those of pure Co₃O₄ and CeO₂ counterparts, outperforming commercial IrO₂ and some recently reported representative OER catalysts. These results demonstrate the validity of tailoring the electrocatalytic properties of metal oxides by 2DEG engineering, offering a step forward in the design of advanced hybrid nanostructures.     

Water‐Plasma‐Enabled Exfoliation of Ultrathin Layered Double Hydroxide Nanosheets with Multivacancies for Water Oxidation

An earth‐abundant and highly efficient electrocatalyst is essential for oxygen evolution reaction (OER) due to its poor kinetics. Layered double hydroxide (LDH)‐based nanomaterials are considered as promising electrocatalysts for OER. However, the stacking structure of LDHs limits the exposure of the active sites. Therefore, the exfoliation is necessary to expose more active sites. In addition, the defect engineering is proved to be an efficient strategy to enhance the performance of OER electrocatalysts. For the first time, this study prepares ultrathin CoFe LDHs nanosheets with multivacancies as OER electrocatalysts by water‐plasma‐enabled exfoliation. The water plasma can destroy the electrostatic interactions between the host metal layers and the interlayer cations, resulting in the fast exfoliation. On the other hand, the etching effect of plasma can simultaneously and effectively produce multivacancies in the as‐exfoliated ultrathin LDHs nanosheets. The increased active sites and the multivacancies significantly contribute to the enhanced electrocatalytic activity for OER. Compared to pristine CoFe LDHs, the as‐exfoliated ultrathin CoFe LDHs nanosheets exhibit excellent catalytic activity for OER with a ultralow overpotential of only 232 mV at 10 mA cm^?2 and possesses outstanding kinetics (the Tafel slope of 36 mV dec^?1). This work provides a novel strategy to exfoliate LDHs and to produce multivacancies simultaneously as highly efficient electrocatalysts for OER.     

Oxygen‐Vacancy and Surface Modulation of Ultrathin Nickel Cobaltite Nanosheets as a High‐Energy Cathode for Advanced Zn‐Ion Batteries

The development of high‐capacity, Earth‐abundant, and stable cathode materials for robust aqueous Zn‐ion batteries is an ongoing challenge. Herein, ultrathin nickel cobaltite (NiCo₂O₄) nanosheets with enriched oxygen vacancies and surface phosphate ions (P–NiCo₂O_4‐x) are reported as a new high‐energy‐density cathode material for rechargeable Zn‐ion batteries. The oxygen‐vacancy and surface phosphate‐ion modulation are achieved by annealing the pristine NiCo₂O₄ nanosheets using a simple phosphating process. Benefiting from the merits of substantially improved electrical conductivity and increased concentration of active sites, the optimized P–NiCo₂O_4‐x nanosheet electrode delivers remarkable capacity (309.2 mAh g^?1 at 6.0 A g^?1) and extraordinary rate performance (64% capacity retention at 60.4 A g^?1). Moreover, based on the P–NiCo₂O_4‐x cathode, our fabricated P–NiCo₂O_4‐x//Zn battery presents an impressive specific capacity of 361.3 mAh g^?1 at the high current density of 3.0 A g^?1 in an alkaline electrolyte. Furthermore, extremely high energy density (616.5 Wh kg^?1) and power density (30.2 kW kg^?1) are also achieved, which outperforms most of the previously reported aqueous Zn‐ion batteries. This ultrafast and high‐energy aqueous Zn‐ion battery is promising for widespread application to electric vehicles and intelligent devices.     

Oxygen Vacancies Dominated NiS2/CoS2 Interface Porous Nanowires for Portable Zn–Air Batteries Driven Water Splitting Devices

The development of highly active and stable oxygen evolution reaction (OER) electrocatalysts is crucial for improving the efficiency of water splitting and metal–air battery devices. Herein, an efficient strategy is demonstrated for making the oxygen vacancies dominated cobalt–nickel sulfide interface porous nanowires (NiS₂/CoS₂–O NWs) for boosting OER catalysis through in situ electrochemical reaction of NiS₂/CoS₂ interface NWs. Because of the abundant oxygen vacancies and interface porous nanowires structure, they can catalyze the OER efficiently with a low overpotential of 235 mV at j = 10 mA cm^?2 and remarkable long‐term stability in 1.0 m KOH. The home‐made rechargeable portable Zn–air batteries by using NiS₂/CoS₂–O NWs as the air–cathode display a very high open‐circuit voltage of 1.49 V, which can maintain for more than 30 h. Most importantly, a highly efficient self‐driven water splitting device is designed with NiS₂/CoS₂–O NWs as both anode and cathode, powered by two‐series‐connected NiS₂/CoS₂–O NWs‐based portable Zn–air batteries. The present work opens a new way for designing oxygen vacancies dominated interface nanowires as highly efficient multifunctional electrocatalysts for electrochemical reactions and renewable energy devices.     

Ultrathin Amorphous Nickel Doped Cobalt Phosphates with Highly Ordered Mesoporous Structures as Efficient Electrocatalyst for Oxygen Evolution Reaction

Herein, the facile preparation of ultrathin (≈3.8 nm in thickness) 2D cobalt phosphate (CoPi) nanoflakes through an oil‐phase method is reported. The obtained nanoflakes are composed of highly ordered mesoporous (≈3.74 nm in diameter) structure and exhibit an amorphous nature. Attractively, when doped with nickel, such 2D mesoporous Ni‐doped CoPi nanoflakes display decent electrocatalytic performances in terms of intrinsic activity, and low kinetic barrier toward the oxygen evolution reaction (OER). Particularly, the optimized 10 at% Ni‐doped CoPi nanoflakes (denoted as Ni10‐CoPi) deliver a low overpotential at 10 mA cm^?2 (320 mV), small Tafel slope (44.5 mV dec^?1), and high stability for OER in 1.0 m KOH solution, which is comparable to the state‐of‐the‐art RuO₂ tested in the same condition (overpotential: 327 mV at 10 mA cm^?2, Tafel slope: 73.7 mV dec^?1). The robust framework coupled with good OER performance enables the 2D mesoporous Ni10‐CoPi nanoflakes to be a promising material for energy conversion applications.     

Efficient Ternary Mn-Based Spinel Oxide with Multiple Active Sites for Oxygen Evolution Reaction Discovered via High-Throughput Screening Methods (Small 2/2023)

The discovery of more efficient and stable catalysts for oxygen evolution reaction (OER) is vital in improving the efficiency of renewable energy generation devices. Given the large numbers of possible binary and ternary metal oxide OER catalysts, high-throughput methods are necessary to accelerate the rate of discovery. Herein, Mn-based spinel oxide, Fe₁₀Co₄₀Mn₅₀O, is identified for the first time using high-throughput methods demonstrating remarkable catalytic activity (overpotential of 310 mV on fluorine-doped tin oxide (FTO) substrate and 237 mV on Ni foam at 10 mA cm⁻²). Using a combination of soft X-ray absorption spectroscopy and electrochemical measurements, the high catalytic activity is attributed to 1) the formation of multiple active sites in different geometric sites, tetrahedral and octahedral sites; and 2) the formation of active oxyhydroxide phase due to the strong interaction of Co²⁺ and Fe³⁺. Structural and surface characterizations after OER show preservation of Fe₁₀Co₄₀Mn₅₀O surface structure highlighting its durability against irreversible redox damage on the catalytic surface. This work demonstrates the use of a high-throughput approach for the rapid identification of a new catalyst, provides a deeper understanding of catalyst design, and addresses the urgent need for a better and stable catalyst to target greener fuel.     

Reduced Graphene Oxide‐Wrapped Co9–xFexS8/Co,Fe‐N‐C Composite as Bifunctional Electrocatalyst for Oxygen Reduction and Evolution

Searching for highly efficient bifunctional electrocatalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) using nonnoble metal‐based catalysts is essential for the development of many energy conversion systems, including rechargeable fuel cells and metal–air batteries. Here, Co_9–xFe_xS₈/Co,Fe‐N‐C hybrids wrapped by reduced graphene oxide (rGO) (abbreviated as S‐Co_9–xFe_xS₈@rGO) are synthesized through a semivulcanization and calcination method using graphene oxide (GO) wrapped bimetallic zeolite imidazolate framework (ZIF) Co,Fe‐ZIF (CoFe‐ZIF@GO) as precursors. Benefiting from the synergistic effect of OER active CoFeS and ORR active Co,Fe‐N‐C in a single component, as well as high dispersity and enhanced conductivity derived from rGO coating and Fe‐doping, the obtained S‐Co_9–xFe_xS₈@rGO‐10 catalyst shows an ultrasmall overpotential of ≈0.29 V at 10 mA cm^?2 in OER and a half‐wave potential of 0.84 V in ORR, combining a superior oxygen electrode activity of ≈0.68 V in 0.1 m KOH.     

Defects‐Induced In‐Plane Heterophase in Cobalt Oxide Nanosheets for Oxygen Evolution Reaction

Cobalt oxides as efficient oxygen evolution reaction (OER) electrocatalysts have received much attention because of their rich reserves and cheap cost. There are two common cobalt oxides, Co₃O₄ (spinel phase, stable but poor intrinsic activity) and CoO (rocksalt phase, active but easily be oxidatized). Constructing Co₃O₄/CoO heterophase can inherit both characteristic features of each component and form a heterophase interface facilitating charge transfer, which is believed to be an effective strategy in designing excellent electrocatalysts. Herein, an atomic arrangement engineering strategy is applied to improve electrocatalytic activity of Co₃O₄ for the OER. With the presence of oxygen vacancies, cobalt atoms at tetrahedral sites in Co₃O₄ can more easily diffuse into interstitial octahedral sites to form CoO phase structure as revealed by periodic density functional theory computations. The Co₃O₄/CoO spinel/rocksalt heterophase can be in situ fabricated at the atomic scale in plane. The overpotential to reach 10 mA cm^?2 of Co₃O₄/CoO is 1.532 V, which is 92 mV smaller than that of Co₃O₄. Theoretical calculations confirm that the excellent electrochemical activity is corresponding to a decline in average p‐state energy of adsorbed‐O on the Co₃O₄/CoO heterophase interface. The reaction Gibbs energy barrier has been significantly decreased with the construction of the heterophase interface.     

One‐Step Route Synthesized Co2P/Ru/N‐Doped Carbon Nanotube Hybrids as Bifunctional Electrocatalysts for High‐Performance Li–O2 Batteries

The large‐scale commercial application of lithium–oxygen batteries (LOBs) is overwhelmed by the sluggish kinetics of oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) associated with insoluble and insulated Li₂O₂. Herein, an elaborate design on a highly catalytic LOBs cathode constructed by N‐doped carbon nanotubes (CNT) with in situ encapsulated Co₂P and Ru nanoparticles is reported. The homogeneously dispersed Co₂P and Ru catalysts can effectively modulate the formation and decomposition behavior of Li₂O₂ during discharge/charge processes, ameliorating the electronically insulating property of Li₂O₂ and constructing a homogenous low‐impedance Li₂O₂/catalyst interface. Compared with Co/CNT and Ru/CNT electrodes, the Co₂P/Ru/CNT electrode delivers much higher oxygen reduction triggering onset potential and higher ORR and OER peak current and integral areas, showing greatly improved ORR/OER kinetics due to the synergistic effects of Co₂P and Ru. Li–O₂ cells based on the Ru/Co₂P/CNT electrode demonstrate improved ORR/OER overpotential of 0.75 V, excellent rate capability of 12 800 mAh g^?1 at 1 A g^?1, and superior cycle stability for more than 185 cycles under a restricted capacity of 1000 mAh g^?1 at 100 mA g^?1. This work paves an exciting avenue for the design and construction of bifunctional catalytic cathodes by coupling metal phosphides with other active components in LOBs.     

Edge Sites with Unsaturated Coordination on Core–Shell Mn3O4@MnxCo3−xO4 Nanostructures for Electrocatalytic Water Oxidation

Transition‐metal oxides are extensively investigated as efficient electrocatalysts for the oxygen evolution reaction (OER). However, large‐scale applications remain challenging due to their moderate catalytic activity. Optimized regulation of surface states can lead to improvement of catalytic properties. Here, the design of Mn@Co_x Mn_3?x O₄ nanoparticles with abundant edge sites via a simple seed‐mediated growth strategy is described. The unsaturated coordination generated on the edge sites of Co_x Mn_3?x O₄ shells makes a positive contribution to the surface‐structure tailoring. Density functional theory calculations indicate that the edge sites with unsaturated coordination exhibit intense affinity for OH^? in the alkaline electrolyte, which greatly enhances the electrochemical OER performance of the catalysts. The resulting Mn@Co_x Mn_3?x O₄ catalysts yield a current density of 10 mA cm^?2 at an overpotential of 246 mV and a relatively low Tafel slope of 46 mV dec^?1. The successful synthesis of these metal oxides nanoparticles with edge sites may pave a new path for rationally fabricating efficient OER catalysts.     

Oxidized Laser‐Induced Graphene for Efficient Oxygen Electrocatalysis

An efficient metal‐free catalyst is presented for oxygen evolution and reduction based on oxidized laser‐induced graphene (LIG‐O). The oxidation of LIG by O₂ plasma to form LIG‐O boosts its performance in the oxygen evolution reaction (OER), exhibiting a low onset potential of 260 mV with a low Tafel slope of 49 mV dec^?1, as well as an increased activity for the oxygen reduction reaction. Additionally, LIG‐O shows unexpectedly high activity in catalyzing Li₂O₂ decomposition in Li‐O₂ batteries. The overpotential upon charging is decreased from 1.01 V in LIG to 0.63 V in LIG‐O. The oxygen‐containing groups make essential contributions, not only by providing the active sites, but also by facilitating the adsorption of OER intermediates and lowering the activation energy.