DMSO-treated flexible PEDOT:PSS/PANi fiber electrode for high performance supercapacitors

Wearable energy storage device nowadays gains great interest due to sharply increased demand for highly flexible, stretchable and embedded electronics, where fiber-based supercapacitor (FSC) is a competitive counterpart. The poly(3,4-ethylenedioxythiophene):poly(styrenesulfonic acid)/ polyaniline (PEDOT:PSS/PANi) fiber has been prepared via an accessible technique of one-dimensional (1D) self-assembly. Nevertheless, PSS as the main cross-linking matrix may lead to more hopping sites for charge carriers, lessening the continuous electrically conductive path. Herein, PEDOT:PSS/PANi fiber was treated with dimethyl sulfoxide (DMSO) to remove the insulative PSS chains. Coupling high electroactivity of PANi and high conductivity of PEDOT, the optimized DMSO-PEDOT:PSS/PANi fiber displays enhanced electrochemical properties with a high specific capacitance (C_s) of 367.7 F g^?1 at 0.5 A g^?1 and good rate capability. Moreover, a symmetric FSC based on the DMSO-P₄P₆ fiber exhibits a high energy density of 42.4 Wh kg^?1 at a power density of 302.3 W kg^?1.

Graphical abstract

PEDOT: PSS/PANi fibers are prepared via a simple technique of one-dimensional (1D) self-assembly, and the PEDOT: PSS/PANi fiber exhibits superior flexibility, electrical conductivity, and electrochemical properties.

     

Enhancement-Mode PEDOT:PSS Organic Electrochemical Transistors Using Molecular De-Doping

Organic electrochemical transistors (OECTs) show great promise for flexible, low-cost, and low-voltage sensors for aqueous solutions. The majority of OECT devices are made using the polymer blend poly(ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS), in which PEDOT is intrinsically doped due to inclusion of PSS. Because of this intrinsic doping, PEDOT:PSS OECTs generally operate in depletion mode, which results in a higher power consumption and limits stability. Here, a straightforward method to de-dope PEDOT:PSS using commercially available amine-based molecular de-dopants to achieve stable enhancement-mode OECTs is presented. The enhancement-mode OECTs show mobilities near that of pristine PEDOT:PSS (≈2 cm² V⁻¹ s⁻¹) with stable operation over 1000 on/off cycles. The electron and proton exchange among PEDOT, PSS, and the molecular de-dopants are characterized to reveal the underlying chemical mechanism of the threshold voltage shift to negative voltages. Finally, the effect of the de-doping on the microstructure of the spin-cast PEDOT:PSS films is investigated.     

Composite supercapacitor electrodes made of activated carbon/PEDOT:PSS and activated carbon/doped PEDOT

In this paper, we report on the high electrical storage capacity of composite electrodes made from nanoscale activated carbon combined with either poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) or PEDOT doped with multiple dopants such as ammonium persulfate (APS) and dimethyl sulfoxide (DMSO). The composites were fabricated by electropolymerization of the conducting polymers (PEDOT:PSS, doped PEDOT) onto the nanoscale activated carbon backbone, wherein the nanoscale activated carbon was produced by ball-milling followed by chemical and thermal treatments. Activated carbon/PEDOT:PSS yielded capacitance values of 640 F g^?1 and 26 mF cm^?2, while activated carbon/doped PEDOT yielded capacitances of 1183 F g^?1 and 42 mF cm^?2 at 10 mV s^?1. This is more than five times the storage capacity previously reported for activated carbon–PEDOT composites. Further, use of multiple dopants in PEDOT improved the storage performance of the composite electrode well over that of PEDOT:PSS. The composite electrodes were characterized for their electrochemical behaviour, structural and morphological details and electronic conductivity and showed promise as high-performance energy storage systems.     

High‐Performance Inverted Planar Perovskite Solar Cells Enhanced by Thickness Tuning of New Dopant‐Free Hole Transporting Layer

A new hole transporting material (HTM) named DMZ is synthesized and employed as a dopant‐free HTM in inverted planar perovskite solar cells (PSCs). Systematic studies demonstrate that the thickness of the hole transporting layer can effectively enhance the morphology and crystallinity of the perovskite layer, leading to low series resistance and less defects in the crystal. As a result, the champion power conversion efficiency (PCE) of 18.61% with J_SC = 22.62 mA cm^?2, V_OC = 1.02 V, and FF = 81.05% (an average one is 17.62%) is achieved with a thickness of ≈13 nm of DMZ (2 mg mL^?1) under standard global AM 1.5 illumination, which is ≈1.5 times higher than that of devices based on poly(3,4‐ethylenedioxythiophene)/poly(styrene sulfonic acid) (PEDOT:PSS). More importantly, the devices based on DMZ exhibit a much better stability (90% of maximum PCE retained after more than 556 h in air (relative humidity ≈ 45%–50%) without any encapsulation) than that of devices based on PEDOT:PSS (only 36% of initial PCE retained after 77 h in same conditions). Therefore, the cost‐effective and facile material named DMZ offers an appealing alternative to PEDOT:PSS or polytriarylamine for highly efficient and stable inverted planar PSCs.     

Highly Conductive Ti3C2Tx MXene Hybrid Fibers for Flexible and Elastic Fiber‐Shaped Supercapacitors

Fiber‐shaped supercapacitors (FSCs) are promising energy storage solutions for powering miniaturized or wearable electronics. However, the scalable fabrication of fiber electrodes with high electrical conductivity and excellent energy storage performance for use in FSCs remains a challenge. Here, an easily scalable one‐step wet‐spinning approach is reported to fabricate highly conductive fibers using hybrid formulations of Ti₃C₂T_x MXene nanosheets and poly(3,4‐ethylenedioxythiophene):polystyrene sulfonate. This approach produces fibers with a record conductivity of ≈1489 S cm^?1, which is about five times higher than other reported Ti₃C₂T_x MXene‐based fibers (up to ≈290 S cm^?1). The hybrid fiber at ≈70 wt% MXene shows a high volumetric capacitance (≈614.5 F cm^?3 at 5 mV s^?1) and an excellent rate performance (≈375.2 F cm^?3 at 1000 mV s^?1). When assembled into a free‐standing FSC, the energy and power densities of the device reach ≈7.13 Wh cm^?3 and ≈8249 mW cm^?3, respectively. The excellent strength and flexibility of the hybrid fibers allow them to be wrapped on a silicone elastomer fiber to achieve an elastic FSC with 96% capacitance retention when cyclically stretched to 100% strain. This work demonstrates the potential of MXene‐based fiber electrodes and their scalable production for fiber‐based energy storage applications.     

Coupling PEDOT on Mesoporous Vanadium Nitride Arrays for Advanced Flexible All‐Solid‐State Supercapacitors

Tailored construction of advanced flexible supercapacitors (SCs) is of great importance to the development of high‐performance wearable modern electronics. Herein, a facile combined wet chemical method to fabricate novel mesoporous vanadium nitride (VN) composite arrays coupled with poly(3,4‐ethylenedioxythiophene) (PEDOT) as flexible electrodes for all‐solid‐state SCs is reported. The mesoporous VN nanosheets arrays prepared by the hydrothermal–nitridation method are composed of cross‐linked nanoparticles of 10–50 nm. To enhance electrochemical stability, the VN is further coupled with electrodeposited PEDOT shell to form high‐quality VN/PEDOT flexible arrays. Benefiting from high intrinsic reactivity and enhanced structural stability, the designed VN/PEDOT flexible arrays exhibit a high specific capacitance of 226.2 F g^?1 at 1 A g^?1 and an excellent cycle stability with 91.5% capacity retention after 5000 cycles at 10 A g^?1. In addition, high energy/power density (48.36 Wh kg^?1 at 2 A g^?1 and 4 kW kg^?1 at 5 A g^?1) and notable cycling life (91.6% retention over 10 000 cycles) are also achieved in the assembled asymmetric flexible supercapacitor cell with commercial nickel–cobalt–aluminum ternary oxides cathode and VN/PEDOT anode. This research opens up a way for construction of advanced hybrid organic–inorganic electrodes for flexible energy storage.     

Synthesis of P‐Doped and NiCo‐Hybridized Graphene‐Based Fibers for Flexible Asymmetrical Solid‐State Micro‐Energy Storage Device

Fiber supercapacitors (FSCs) are promising energy storage devices in portable and wearable smart electronics. Currently, a major challenge for FSCs is simultaneously achieving high volumetric energy and power densities. Herein, the microscale fiber electrode is designed by using carbon fibers as substrates and capillary channels as microreactors to space‐confined hydrothermal assembling. As P‐doped graphene oxide/carbon fiber (PGO/CF) and NiCo₂O₄‐based graphene oxide/carbon fiber (NCGO/CF) electrodes are successfully prepared, their unique hybrid structures exhibit a satisfactory electrochemical performance. An all‐solid‐state PGO/CF//NCGO/CF flexible asymmetric fiber supercapacitor (AFSC) based on the PGO/CF as the negative electrode, NCGO/CF hybrid electrode as the positive electrode, and poly(vinyl alcohol)/potassium hydroxide as the electrolyte is successfully assembled. The AFSC device delivers a higher volumetric energy density of 36.77 mW h cm^?3 at a power density of 142.5 mW cm^?3. In addition, a double reference electrode system is adopted to analyze and reduce the IR drop, as well as effectively matching negative and positive electrodes, which is conducive for the optimization and improvement of energy density. For the AFSC device, its better flexibility and electrochemical properties create a promising potential for high‐performance micro‐supercapacitors. Furthermore, the introduction of the double reference electrode system provides an interesting method for the study on the electrochemical performances of two‐electrode systems.     

A self-healing hydrogel electrolyte towards all-in-one flexible supercapacitors

The self-healing electrolytes play an essential role in self-healing supercapacitors. Herein, poly (vinyl alcohol)/sulphuric acid (PVA/H₂SO₄) hydrogel electrolytes with self-healing properties are prepared, which has been achieved by dynamic hydrogen bonds between PVA chains. The obtained PVA hydrogel displays fast self-healing capability, reliable mechanical performance (stress at 0.29 MPa after stretching to 238%) and high ionic conductivity (57.8 mS cm^?1). Based on these excellent properties, an all-in-one self-healing supercapacitor is assembled by in situ polymerization of aniline on the surface of PVA/H₂SO₄ hydrogel electrolyte. The assembled all-in-one supercapacitor shows outstanding capacitance performance (specific capacitance 504 mF cm^?2 at current density of 0.2 mA cm^?2 and energy density 35 μWh cm^?2 at power density 100 μW cm^?2), good cycle stability (after 5000 cycles of charging and discharging, the capacitance retention rate is 77%), excellent flexibility and considerable self-healing performance (69% capacitance retention rate after the fifth self-healing cycle). This self-healing supercapacitor will promote the development of self-healing energy storage devices in wearable electronics.

     

Stretchable All‐Gel‐State Fiber‐Shaped Supercapacitors Enabled by Macromolecularly Interconnected 3D Graphene/Nanostructured Conductive Polymer Hydrogels

Nanostructured conductive polymer hydrogels (CPHs) have been extensively applied in energy storage owing to their advantageous features, such as excellent electrochemical activity and relatively high electrical conductivity, yet the fabrication of self‐standing and flexible electrode‐based CPHs is still hampered by their limited mechanical properties. Herein, macromolecularly interconnected 3D graphene/nanostructured CPH is synthesized via self‐assembly of CPHs and graphene oxide macrostructures. The 3D hybrid hydrogel shows uniform interconnectivity and enhanced mechanical properties due to the strong macromolecular interaction between the CPHs and graphene, thus greatly reducing aggregation in the fiber‐shaping process. A proof‐of‐concept all‐gel‐state fibrous supercapacitor based on the 3D polyaniline/graphene hydrogel is fabricated to demonstrate the outstanding flexibility and mouldability, as well as superior electrochemical properties enabled by this 3D hybrid hydrogel design. The proposed device can achieve a large strain (up to ≈40%), and deliver a remarkable volumetric energy density of 8.80 mWh cm^?3 (at power density of 30.77 mW cm^?3), outperforming many fiber‐shaped supercapacitors reported previously. The all‐hydrogel design opens up opportunities in the fabrication of next‐generation wearable and portable electronics.     

Improved thermoelectric performance of PEDOT:PSS films prepared by polar-solvent vapor annealing method

To improve thermoelectric performance, polar-solvent vapor annealing (PSVA) method was introduced into the preparation of poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) films. The solvent vapors included dimethyl sulfoxide, ethylene glycol, N,N-dimethylformamide, N-methyl-2-pyrrolidone, and deionized water (H₂O). The PSVA-treated PEDOT:PSS films exhibited significantly enhanced electrical conductivity and the maximum value was up to 496 S cm^?1. Especially, utilizing the PSVA method, H₂O could also remarkably enhance the electrical conductivity of pristine PEDOT:PSS film from 0.2 to 57 S cm^?1. There was no distinct change for the Seebeck coefficient of PSVA-treated films with the significantly enhanced electrical conductivity, thereby a maximum power factor of 9.47 μW m^?1 K^?2 at room temperature was obtained. The effects of PSVA method on thermoelectric performance of PEDOT:PSS films were also investigated systematically by analyzing the changes in morphology, carrier mobility and carrier concentration. The results confirmed that PSVA-treated PEDOT:PSS films could obtain smoother morphologies and realize the simultaneous increase of carrier mobility and carrier concentration, which results in the improvement of the thermoelectric performance.     

A Highly Stretchable and Real‐Time Healable Supercapacitor

In addition to a high specific capacitance, a large stretchability and self‐healing properties are also essential to improve the practicality and reliability of supercapacitors in portable and wearable electronics. However, the integration of multiple functions into one device remains challenging. Here, the construction of a highly stretchable and real‐time omni‐healable supercapacitor is demonstrated by sandwiching the polypyrrole‐incorporated gold nanoparticle/carbon nanotube (CNT)/poly(acrylamide) (GCP@PPy) hydrogel electrodes with a CNT‐free GCP (GP) hydrogel as the electrolyte and chemically soldering an Ag nanowire film to the hydrogel electrode as the current collector. The newly developed dynamic metal‐thiolate (M‐SR, M = Au, Ag) bond‐induced integrated configuration, with an intrinsically powerful electrode and electrolyte, enables the assembled supercapacitor to deliver an areal capacitance of 885 mF cm^?2 and an energy density of 123 µWh cm^?2, which are among the highest‐reported values for stretchable supercapacitors. Notably, the device exhibits a superhigh stretching strain of 800%, rapid optical healing capability, and significant real‐time healability during the charge–discharge process. The exceptional performance combined with the facile assembly method confirms this multifunctional device as the best performer among all the flexible supercapacitors reported to date.     

Fabrication of flexible conductive films derived from poly(3,4-ethylenedioxythiophene)–poly(styrenesulfonic acid) (PEDOT:PSS) on the nonwoven fabrics substrate

In this research, conducting poly(3,4-ethylenedioxythiophene)–poly(styrenesulfonic acid) (PEDOT:PSS) aqueous dispersion was synthesized at first via chemical oxidative polymerization and followed by mixing it with poly(styrene-r-butyl acrylate) P(St-BA) aqueous latex, creating a conductive material with outstanding stretchability. The elastic conductive composite were then film formed on the glass and poly(ethylene terephthalate) (PET) nonwoven fabric substrate by spin coating and dip coating, respectively. Composite films with various contents of PEDOT:PSS polymer (10–100 wt.%) had been prepared. From the conductivity measurements, the conductivity was still kept as high as 88 S cm⁻¹ even the PEDOT:PSS content was lowered to 10 wt.%. Furthermore, the elasticity of conductive films on the PET-nonwoven fabric substrate was evaluated by the 180° bending test repeating 100 times. With introducing soft P(St-BA) material in the PEDOT:PSS phase, the surface resistance increased merely 3–6 times after bending 100 times, while the surface resistance for pure PEDOT:PSS film could reach 18–20 times.     

Roll‐to‐Roll Production of Graphene Hybrid Electrodes for High‐Efficiency,Flexible Organic Photoelectronics

Despite nearly two decades of research, the absence of ideal, flexible, and transparent electrodes has been the biggest bottleneck for realizing flexible and printable electronics via roll‐to‐roll (R2R) method. A fabrication of poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonate):graphene:ethyl cellulose (PEDOT:PSS:G:EC) hybrid electrodes by R2R process, which allows for the elimination of strong acid treatment. The high‐performance flexible printable electrode includes a transmittance (T) of 78% at 550 nm and a sheet resistance of 13 Ω sq⁻¹ with excellent mechanical stability. These features arise from the PSS interacting strongly with the ethyoxyl groups from EC promoting a favorable phase separation between PEDOT and PSS chains, and the highly uniform and conductive G:EC enable rearrangement of the PEDOT chains with more expanded conformation surrounded by G:EC via the π–π interaction between G:EC and PEDOT. The hybrid electrodes are fully functional as universal electrodes for outstanding flexible electronic applications. Organic solar cells based on the hybrid electrode exhibit a high power conversion efficiency of 9.4% with good universality for active layer. Moreover, the organic light‐emitting diodes and photodetector devices hold the same level to or outperform those based on indium tin oxide flexible transparent electrodes.     

Application of poly(3,4-ethylenedioxythiophene):polystyrenesulfonate in polymer heterojunction solar cells

In this study, p-type semiconducting polymer of acid, poly(3,4-ethylenedioxythiophene):polystyrenesulfonate (PEDOT:PSS), has been employed as a hole-transporting electrode to fabricate organic polymer heterojunction photovoltaic cells. The results showed that the resultant poly(3-hexylthiophene): C₆₀ derivatives [6]-phenyl-C₆₁-butyric acid methyl ester (P3HT:PCBM)/PEDOT:PSS can significantly expand the light absorption range which was expected to enhance the sunlight excitation. The influences of annealing conditions and barrier layer on the photoelectric performances were investigated in detail, giving an optimized synthesis conditions: annealed temperature was at 120 °C for 90 min, the thickness of PEDOT:PSS film was approximately 3–4 μm, and the ratio of PCBM and P3HT was 1:2. The blended heterojunction consisting of PCBM and P3HT was used as charge carrier-transferring medium to replace I₃ ^?/I^? redox electrolyte, showing a short-circuit current of 4.30 mA cm^?2, an open-circuit voltage of 0.83 V, and a light-to-electric energy conversion efficiency of 2.37 % under a simulated solar light irradiation of 100 mW cm^?2. In addition, a solid-state polymer heterojunction photovoltaic cells with a short-circuit current of 3.59 mA cm^?2, an open-circuit voltage of 0.80 V, and a light-to-electric energy conversion efficiency of 1.9 % was successfully fabricated by simplifying the process.     

Vertically Oriented Graphene Nanoribbon Fibers for High‐Volumetric Energy Density All‐Solid‐State Asymmetric Supercapacitors

Graphene fiber based micro‐supercapacitors (GF micro‐SCs) have attracted great attention for their potential applications in portable and wearable electronics. However, due to strong π–π stacking of nanosheets for graphene fibers, the limited ion accessible surface area and slow ion diffusion rate leads to low specific capacitance and poor rate performance. Here, the authors report a strategy for the synthesis of a vertically oriented graphene nanoribbon fiber with highly exposed surface area through confined‐hydrothermal treatment of interconnected graphene oxide nanoribbons and consequent laser irradiation process. As a result, the as‐obtained fiber shows high length specific capacitance of 3.2 mF cm^?1 and volumetric capacitance of 234.8 F cm^?3 at 2 mV s^?1, as well as excellent rate capability and outstanding cycling performance (96% capacitance retention after 10 000 cycles). Moreover, an all‐solid‐state asymmetric supercapacitor based on graphene nanoribbon fiber as negative electrode and MnO₂ coated graphene ribbon fiber as positive electrode, shows high volumetric capacitance and energy density of 12.8 F cm^?3 and 5.7 mWh cm^?3 (normalized to the device volume), respectively, much higher than those of previously reported GF micro‐SCs, as well as a long cycle life with 88% of capacitance retention after 10 000 cycles.     

The thermoelectric performance of carbon black/poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) composite films

Carbon black/poly(3,4-ethylenedioxythiophene):poly(4-styrenesulfonate) (CB/PEDOT:PSS) composite films have been prepared by a spin-coating method. The morphology of the composite films was investigated by field emission scanning electron microscopy and atomic force microscopy. The thermoelectric properties of CB/PEDOT:PSS composite films were measured at room temperature. As the content of CB increased from 0 to 11.16 wt%, the electrical conductivity of the composite films first increased sharply and then decreased, while the Seebeck coefficient increased slowly. A highest power factor of 0.96 μWm^?1 K^?2 was obtained.     

All‐Solution‐Processed Pure Formamidinium‐Based Perovskite Light‐Emitting Diodes

All‐solution‐processed pure formamidinium‐based perovskite light‐emitting diodes (PeLEDs) with record performance are successfully realized. It is found that the FAPbBr₃ device is hole dominant. To achieve charge carrier balance, on the anode side, PEDOT:PSS 8000 is employed as the hole injection layer, replacing PEDOT:PSS 4083 to suppress the hole current. On the cathode side, the solution‐processed ZnO nanoparticle (NP) is used as the electron injection layer in regular PeLEDs to improve the electron current. With the smallest ZnO NPs (2.9 nm) as electron injection layer (EIL), the solution‐processed PeLED exhibits a highest forward viewing power efficiency of 22.3 lm W^?1, a peak current efficiency of 21.3 cd A^?1, and an external quantum efficiency of 4.66%. The maximum brightness reaches a record 1.09 × 10⁵ cd m^?2. A record lifetime T₅₀ of 436 s is achieved at the initial brightness of 10 000 cd m^?2. Not only do PEDOT:PSS 8000 HIL and ZnO NPs EIL modulate the injected charge carriers to reach charge balance, but also they prevent the exciton quenching at the interface between the charge injection layer and the light emission layer. The subbandgap turn‐on voltage is attributed to Auger‐assisted energy up‐conversion process.     

Self‐Suppression of Lithium Dendrite in All‐Solid‐State Lithium Metal Batteries with Poly(vinylidene difluoride)‐Based Solid Electrolytes

Polymer‐based electrolytes have attracted ever‐increasing attention for all‐solid‐state lithium (Li) metal batteries due to their ionic conductivity, flexibility, and easy assembling into batteries, and are expected to overcome safety issues by replacing flammable liquid electrolytes. However, it is still a critical challenge to effectively block Li dendrite growth and improve the long‐term cycling stability of all‐solid‐state batteries with polymer electrolytes. Here, the interface between novel poly(vinylidene difluoride) (PVDF)‐based solid electrolytes and the Li anode is explored via systematical experiments in combination with first‐principles calculations, and it is found that an in situ formed nanoscale interface layer with a stable and uniform mosaic structure can suppress Li dendrite growth. Unlike the typical short‐circuiting that often occurs in most studied poly(ethylene oxide) systems, this interface layer in the PVDF‐based system causes an open‐circuiting feature at high current density and thus avoids the risk of over‐current. The effective self‐suppression of the Li dendrite observed in the PVDF–LiN(SO₂F)₂ (LiFSI) system enables over 2000 h cycling of repeated Li plating–stripping at 0.1 mA cm^?2 and excellent cycling performance in an all‐solid‐state LiCoO₂||Li cell with almost no capacity fade after 200 cycles at 0.15 mA cm^?2 at 25 °C. These findings will promote the development of safe all‐solid‐state Li metal batteries.     

Influence of ethylene glycol vapor annealing on structure and property of wet-spun PVA/PEDOT:PSS blend fiber

In this study, blend fibers composed of poly(vinyl alcohol) and poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) (PEDOT:PSS) were prepared via wet-spinning technology. Ethylene glycol (EG) vapor annealing was employed to improve the electrical conductivity and tensile properties of blend fibers. The effects of EG vapor annealing on structures and properties of blend fibers were investigated in detail by analyzing the changes in chemical constituent and structure, molecular structure, surface morphology, surface chemical composition, electrical conductivity, and tensile properties. FTIR spectroscopy indicates that EG vapor annealing does not change the chemical constituent and structure of blend fibers. Raman spectroscopy shows that vapor annealing leads to conformational changes of PEDOT chains from benzoid structure to quinoid structure. AFM and SEM images show that surface morphology of blend fibers become smoother after vapor annealing. XPS measurement shows that EG vapor annealing induces significant phase separation between PEDOT and PSS, forming an enriched PSS layer on the surface of blend fibers, thus leading to a thinner insulating PSS layer between PEDOT grains. This conformational change is beneficial to improve the electrical conductivity of blend fibers. The resultant blend fiber reached conductivity up to 20.4 S cm^?1. The mechanical properties of blend fibers were also improved by EG vapor annealing, with the Young’s modulus and tensile strength increasing from 3.6 GPa and 112 MPa to 4.4 GPa and 132.7 MPa, respectively.     

Aluminum‐Ion‐Intercalation Supercapacitors with Ultrahigh Areal Capacitance and Highly Enhanced Cycling Stability: Power Supply for Flexible Electrochromic Devices

Electrochemical capacitor systems based on Al ions can offer the possibilities of low cost and high safety, together with a three‐electron redox‐mechanism‐based high capacity, and thus are expected to provide a feasible solution to meet ever‐increasing energy demands. Here, highly efficient Al‐ion intercalation into W₁₈O₄₉ nanowires (W₁₈O₄₉NWs) with wide lattice spacing and layered single‐crystal structure for electrochemical storage is demonstrated. Moreover, a freestanding composite film with a hierarchical porous structure is prepared through vacuum‐assisted filtration of a mixed dispersion containing W₁₈O₄₉NWs and single‐walled carbon nanotubes. The as‐prepared composite electrode exhibits extremely high areal capacitances of 1.11–2.92 F cm^?2 and 459 F cm^?3 at 2 mA cm^?2, enhanced electrochemical stability in the Al³⁺ electrolyte, as well as excellent mechanical properties. An Al‐ion‐based, flexible, asymmetric electrochemical capacitor is assembled that displays a high volumetric energy density of 19.0 mWh cm^?3 at a high power density of 295 mW cm^?3. Finally, the Al‐ion‐based asymmetric supercapacitor is used as the power source for poly(3‐hexylthiophene)‐based electrochromic devices, demonstrating their promising capability in flexible electronic devices.