Bioinspired Microfibers with Embedded Perfusable Helical Channels

Materials with microchannels have attracted increasing attention due to their promising perfusability and biomimetic geometry. However, the fabrication of microfibers with more geometrically complex channels in the micro‐ or nanoscale remains a big challenge. Here, a novel method for generating scalable microfibers with consecutive embedded helical channels is presented using an easily made coaxial microfluidic device. The characteristics of the helical channel can be accurately controlled by simply adjusting the flow rate ratio of the fluids. The mechanism of the helix formation process is theorized with newly proposed heterogenerated rope‐coil effect, which enhances the tunability of helical patterns and promotes the comprehension of this abnormal phenomenon. Based on this effect, microfibers with embedded Janus channels and even double helical channels are generated in situ by changing the design of the device. The uniqueness and potential applications of these tubular microfibers are also demonstrated by biomimetic supercoiling structures as well as the perfusable and permeable spiral vessel.     

Water Harvesting of Bioinspired Microfibers with Rough Spindle‐Knots from Microfluidics

Heterostructure rough spindle‐knot microfibers (HRSFs) are fabricated via a flexible parallel‐nozzle microfluidic method. In this method, the bioinspired HRSF with a roughness gradient between spindle‐knots and joints, can be manufactured in large‐scale, and with which the size of the spindle‐knots and joints can be precisely adjusted by regulating flow rates. The HRSFs, fabricated with chitosan and calcium alginate, have strong mechanical properties and corrosion resistance in acid environment (pH = 5) and alkaline environment (pH = 9), respectively. More attractively, under controlled treatment conditions, the morphology of the spindle‐knots on the HRSFs can be effectively managed by changing the composite content of calcium chloride in the fluid. During the water collection process, tiny droplets of moisture can be captured on the surface of the HRSFs, subsequently, the droplets can coalesce and be transported from joint to spindle‐knot sections. It is demonstrated that the surface morphology of spindle‐knots directly influences the water collection efficiency, where a higher roughness gradient generates higher water collection efficiency. This parallel‐nozzle microfluidic technology provides a low‐cost and flexible method to manufacture high biocompatibility bioinspired rough spindle‐knot microfibers, which has many potential applications in large‐scale water collection, sustained drug release, and directional water collection.     

Conductive Polymer Hydrogel Microfibers from Multiflow Microfluidics

Conductive hydrogels are receiving increasing attention for their utility in electronic area applications requiring flexible conductors. Here, it is presented novel conductive hydrogel microfibers with alginate shells and poly (3, 4‐ethylenedioxythiophene): poly (4‐styrenesulfonate) (PEDOT: PSS) cores fabricated using a multiflow capillary microfluidic spinning approach. Based on multiflow microfluidics, alginate shells are formed immediately from the fast gelation reaction between sodium alginate (Na‐Alg) and sheath laminar calcium chloride flows, while PEDOT: PSS cores are solidified slowly in the hollow alginate hydrogel shell microreactors after their precursor solutions are injected in situ as the center fluids. The resultant PEDOT: PSS‐containing microfibers are with features of designed morphology and highly controllable package, because material compositions or the sizes of their shell hydrogels can be tailored by using different concentrations or flow rates of pregel solutions. Moreover, the practical values of these microfibers in stretch sensitivity and bending stability are explored based on various electrical characterizations of the compound materials. Thus, it is believed that these microfluidic spinning PEDOT: PSS conductive microfibers will find important utility in electronic applications requiring flexible electronic systems.     

Colloidal Crystals from Microfluidics

Colloidal crystals are of great interest to researchers because of their excellent optical properties and broad applications in barcodes, sensors, displays, drug delivery, and other fields. Therefore, the preparation of high quality colloidal crystals in large quantities with high speed is worth investigating. After decades of development, microfluidics have been developed that provide new choices for many fields, especially for the generation of functional materials in microscale. Through the design of microfluidic chips, colloidal crystals can be prepared controllably with the advantages of fast speed and low cost. In this Review, research progress on colloidal crystals from microfluidics is discussed. After summarizing the classifications, the generation of colloidal crystals from microfluidics is discussed, including basic colloidal particles preparation, and their assembly inside or outside of microfluidic devices. Then, applications of the achieved colloidal crystals from microfluidics are illustrated. Finally, the future development and prospects of microfluidic‐based colloidal crystals are summarized.     

Microfluidics for Manipulating Cells

Microfluidics, a toolbox comprising methods for precise manipulation of fluids at small length scales (micrometers to millimeters), has become useful for manipulating cells. Its uses range from dynamic management of cellular interactions to high‐throughput screening of cells, and to precise analysis of chemical contents in single cells. Microfluidics demonstrates a completely new perspective and an excellent practical way to manipulate cells for solving various needs in biology and medicine. This review introduces and comments on recent achievements and challenges of using microfluidics to manipulate and analyze cells. It is believed that microfluidics will assume an even greater role in the mechanistic understanding of cell biology and, eventually, in clinical applications.     

Electrical Textile Valves for Paper Microfluidics

This paper describes electrically‐activated fluidic valves that operate based on electrowetting through textiles. The valves are fabricated from electrically conductive, insulated, hydrophobic textiles, but the concept can be extended to other porous materials. When the valve is closed, the liquid cannot pass through the hydrophobic textile. Upon application of a potential (in the range of 100–1000 V) between the textile and the liquid, the valve opens and the liquid penetrates the textile. These valves actuate in less than 1 s, require low energy (≈27 µJ per actuation), and work with a variety of aqueous solutions, including those with low surface tension and those containing bioanalytes. They are bistable in function, and are, in a sense, the electrofluidic analog of thyristors. They can be integrated into paper microfluidic devices to make circuits that are capable of controlling liquid, including autonomous fluidic timers and fluidic logic.     

Microfluidics as an Enabling Technology for Personalized Cancer Therapy

Tailoring patient‐specific treatments for cancer is necessary in order to achieve optimal results but requires new diagnostic approaches at affordable prices. Microfluidics has immense potential to provide solutions for this, as it enables the processing of samples that are not available in large quantities (e.g., cells from patient biopsies), is cost efficient, provides a high level of automation, and allows the set‐up of complex models for cancer studies. In this review, individual solutions in the fields of genetics, circulating tumor cell monitoring, biomarker analysis, phenotypic drug sensitivity tests, and systems providing controlled environments for disease modeling are discussed. An overview on how these early stage achievements can be combined or developed further is showcased, and the required translational steps before microfluidics becomes a routine tool for clinical applications are critically discussed.     

Microfluidics for Biosynthesizing: from Droplets and Vesicles to Artificial Cells

Fabrication of artificial biomimetic materials has attracted abundant attention. As one of the subcategories of biomimetic materials, artificial cells are highly significant for multiple disciplines and their synthesis has been intensively pursued. In order to manufacture robust “alive” artificial cells with high throughput, easy operation, and precise control, flexible microfluidic techniques are widely utilized. Herein, recent advances in microfluidic‐based methods for the synthesis of droplets, vesicles, and artificial cells are summarized. First, the advances of droplet fabrication and manipulation on the T‐junction, flow‐focusing, and coflowing microfluidic devices are discussed. Then, the formation of unicompartmental and multicompartmental vesicles based on microfluidics are summarized. Furthermore, the engineering of droplet‐based and vesicle‐based artificial cells by microfluidics is also reviewed. Moreover, the artificial cells applied for imitating cell behavior and acting as bioreactors for synthetic biology are highlighted. Finally, the current challenges and future trends in microfluidic‐based artificial cells are discussed. This review should be helpful for researchers in the fields of microfluidics, biomaterial fabrication, and synthetic biology.     

Bioinspired Composite Microfibers for Skin Adhesion and Signal Amplification of Wearable Sensors

A facile approach is proposed for superior conformation and adhesion of wearable sensors to dry and wet skin. Bioinspired skin‐adhesive films are composed of elastomeric microfibers decorated with conformal and mushroom‐shaped vinylsiloxane tips. Strong skin adhesion is achieved by crosslinking the viscous vinylsiloxane tips directly on the skin surface. Furthermore, composite microfibrillar adhesive films possess a high adhesion strength of 18 kPa due to the excellent shape adaptation of the vinylsiloxane tips to the multiscale roughness of the skin. As a utility of the skin‐adhesive films in wearable‐device applications, they are integrated with wearable strain sensors for respiratory and heart‐rate monitoring. The signal‐to‐noise ratio of the strain sensor is significantly improved to 59.7 because of the considerable signal amplification of microfibrillar skin‐adhesive films.     

Liquid Metal–Based Soft Microfluidics

Motivated by the increasing demand of wearable and soft electronics, liquid metal (LM)‐based microfluidics has been subjected to tremendous development in the past decade, especially in electronics, robotics, and related fields, due to the unique advantages of LMs that combines the conductivity and deformability all‐in‐one. LMs can be integrated as the core component into microfluidic systems in the form of either droplets/marbles or composites embedded by polymer materials with isotropic and anisotropic distribution. The LM microfluidic systems are found to have broad applications in deformable antennas, soft diodes, biomedical sensing chips, transient circuits, mechanically adaptive materials, etc. Herein, the recent progress in the development of LM‐based microfluidics and their potential applications are summarized. The current challenges toward industrial applications and future research orientation of this field are also summarized and discussed.