Component‐Interaction Reinforced Quasi‐Solid Electrolyte with Multifunctionality for Flexible Li–O2 Battery with Superior Safety under Extreme Conditions

High‐performance flexible lithium–oxygen (Li–O₂) batteries with excellent safety and stability are urgently required due to the rapid development of flexible and wearable devices. Herein, based on an integrated solid‐state design by taking advantage of component‐interaction between poly(vinylidene fluoride‐co‐hexafluoropropylene) and nanofumed silica in polymer matrix, a stable quasi‐solid‐state electrolyte (PS‐QSE) for the Li–O₂ battery is proposed. The as‐assembled Li–O₂ battery containing the PS‐QSE exhibits effectively improved anodic reversibility (over 200 cycles, 850 h) and cycling stability of the battery (89 cycles, nearly 900 h). The improvement is attributed to the stability of the PS‐QSE (including electrochemical, chemical, and mechanical stability), as well as the effective protection of lithium anode from aggressive soluble intermediates generated in cathode. Furthermore, it is demonstrated that the interaction among the components plays a pivotal role in modulating the Li‐ion conducting mechanism in the as‐prepared PS‐QSE. Moreover, the pouch‐type PS‐QSE based Li–O₂ battery also shows wonderful flexibility, tolerating various deformations thanks to its integrated solid‐state design. Furthermore, holes can be punched through the Li–O₂ battery, and it can even be cut into any desired shape, demonstrating exceptional safety. Thus, this type of battery has the potential to meet the demands of tailorability and comformability in flexible and wearable electronics.     

The Salt Matters: Enhanced Reversibility of Li–O2 Batteries with a Li[(CF3SO2)(n‐C4F9SO2)N]‐Based Electrolyte

The safety hazards and cycle instability of lithium metal anodes (LMA) constitute significant barriers to progress in lithium metal batteries. This situation is worse in Li–O₂ batteries because the LMA is prone to be chemically attacked by O₂ shuttled from the cathode. Notwithstanding, efforts on LMA are much sparse than those on the cathode in the realm of Li–O₂ batteries. Here, a novel lithium salt of Li[(CF₃SO₂)(n‐C₄F₉SO₂)N] (LiTNFSI) is reported, which can effectively suppress the parasitic side reactions and dendrite growth of LMA during cycling and thereby significantly enhance the overall reversibility of Li–O₂ batteries. A variety of advanced research tools are employed to scrutinize the working principles of the LiTNFSI salt. It is revealed that a stable, uniform, and O₂‐resistive solid electrolyte interphase is formed on LMA, and hence the “cross‐talk” between the LMA and O₂ shuttled from the cathode is remarkably inhibited in LiTNFSI‐based Li–O₂ batteries.     

High‐Coulombic‐Efficiency Carbon/Li Clusters Composite Anode without Precycling or Prelithiation

Lithium metal has attracted much research interest as a possible anode material for high‐energy‐density lithium‐ion batteries in recent years. However, its practical use is severely limited by uncontrollable deposition, volume expansion, and dendrite formation. Here, a metastable state of Li, Li cluster, that forms between LiC₆ and Li dendrites when over‐lithiating carbon cloth (CC) is discovered. The Li clusters with sizes in the micrometer and submicrometer scale own outstanding electrochemical reversibility between Li⁺ and Li, allowing the CC/Li clusters composite anode to demonstrate a high first‐cycle coulombic efficiency (CE) of 94.5% ± 1.0% and a stable CE of 99.9% for 160 cycles, which is exceptional for a carbon/lithium composite anode. The CC/Li clusters composite anode shows a high capacity of 3 mAh cm^?2 contributed by both Li⁺ intercalation and Li‐cluster formation, and excellent cycling stability with a signature sloping voltage profile. Furthermore, the CC/Li clusters composite anode can be assembled into full cells without precycling or prelithiation. The full cells containing bare CC as the anode and excessive LiCoO₂ as the cathode exhibit high specific capacity and good cyclic stability in 200 cycles, stressing the advantage of controlled formation of Li clusters.     

Graphene Oxide Sieving Membrane for Improved Cycle Life in High‐Efficiency Redox‐Mediated Li–O2 batteries

As soluble catalysts, redox‐mediators (RMs) endow mobility to catalysts for unconstrained access to tethered solid discharge products, lowering the energy barrier for Li₂O₂ formation/decomposition; however, this desired mobility is accompanied by the undesirable side effect of RM migration to the Li metal anode. The reaction between RMs and Li metal degrades both the Li metal and the RMs, leading to cell deterioration within a few cycles. To extend the cycle life of redox‐mediated Li–O₂ batteries, herein graphene oxide (GO) membranes are reported as RM‐blocking separators. It is revealed that the size of GO nanochannels is narrow enough to reject 5,10‐dihydro‐5,10‐dimethylphenazine (DMPZ) while selectively allowing the transport of smaller Li⁺ ions. The negative surface charges of GO further repel negative ions via Donnan exclusion, greatly improving the lithium ion transference number. The Li–O₂ cells with GO membranes efficiently harness the redox‐mediation activity of DMPZ for improved performance, achieving energy efficiency of above 80% for more than 25 cycles, and 90% for 78 cycles when the capacity limits were 0.75 and 0.5 mAh cm^‐2, respectively. Considering the facile preparation of GO membranes, RM‐sieving GO membranes can be cost‐effective and processable functional separators in Li–O₂ batteries.     

Developing a “Water‐Defendable” and “Dendrite‐Free” Lithium‐Metal Anode Using a Simple and Promising GeCl4 Pretreatment Method

Lithium metal is an ultimate anode in “next‐generation” rechargeable batteries, such as Li–sulfur batteries and Li–air (Li–O₂) batteries. However, uncontrollable dendritic Li growth and water attack have prevented its practical applications, especially for open‐system Li–O₂ batteries. Here, it is reported that the issues can be addressed via the facile process of immersing the Li metal in organic GeCl₄–THF steam for several minutes before battery assembly. This creates a 1.5 µm thick protection layer composed of Ge, GeO_x, Li₂CO₃, LiOH, LiCl, and Li₂O on Li surface that allows stable cycling of Li electrodes both in Li‐symmetrical cells and Li–O₂ cells, especially in “moist” electrolytes (with 1000–10 000 ppm H₂O) and humid O₂ atmosphere (relative humidity (RH) of 45%). This work illustrates a simple and effective way for the unfettered development of Li‐metal‐based batteries.     

Dual‐Layered Film Protected Lithium Metal Anode to Enable Dendrite‐Free Lithium Deposition

Lithium metal batteries (such as lithium–sulfur, lithium–air, solid state batteries with lithium metal anode) are highly considered as promising candidates for next‐generation energy storage systems. However, the unstable interfaces between lithium anode and electrolyte definitely induce the undesired and uncontrollable growth of lithium dendrites, which results in the short‐circuit and thermal runaway of the rechargeable batteries. Herein, a dual‐layered film is built on a Li metal anode by the immersion of lithium plates into the fluoroethylene carbonate solvent. The ionic conductive film exhibits a compact dual‐layered feature with organic components (ROCO₂Li and ROLi) on the top and abundant inorganic components (Li₂CO₃ and LiF) in the bottom. The dual‐layered interface can protect the Li metal anode from the corrosion of electrolytes and regulate the uniform deposition of Li to achieve a dendrite‐free Li metal anode. This work demonstrates the concept of rational construction of dual‐layered structured interfaces for safe rechargeable batteries through facile surface modification of Li metal anodes. This not only is critically helpful to comprehensively understand the functional mechanism of fluoroethylene carbonate but also affords a facile and efficient method to protect Li metal anodes.     

MoS2/Celgard Separator as Efficient Polysulfide Barrier for Long‐Life Lithium–Sulfur Batteries

A high lithium conductive MoS₂/Celgard composite separator is reported as efficient polysulfides barrier in Li–S batteries. Significantly, thanks to the high density of lithium ions on MoS₂ surface, this composite separator shows high lithium conductivity, fast lithium diffusion, and facile lithium transference. When used in Li–S batteries, the separator is proven to be highly efficient for depressing polysulfides shuttle, leading to high and long cycle stability. With 65% of sulfur loading, the device with MoS₂/Celgard separator delivers an initial capacity of 808 mAh g^?1 and a substantial capacity of 401 mAh g^?1 after 600 cycles, corresponding to only 0.083% of capacity decay per cycle that is comparable to the best reported result so far. In addition, the Coulombic efficiency remains more than 99.5% during all 600 cycles, disclosing an efficient ionic sieve preventing polysulfides migration to the anode while having negligible influence on Li⁺ ions transfer across the separator. The strategy demonstrated in this work will open the door toward developing efficient separators with flexible 2D materials beyond graphene for energy‐storage devices.     

In Situ Designing a Gradient Li+ Capture and Quasi-Spontaneous Diffusion Anode Protection Layer toward Long-Life Li−O2 Batteries

Lithium metal is the only anode material that can enable the Li−O₂ battery to realize its high theoretical energy density (≈3500 Wh kg⁻¹). However, the inherent uncontrolled dendrite growth and serious corrosion limitations of lithium metal anodes make it experience fast degradation and impede the practical application of Li−O₂ batteries. Herein, a multifunctional complementary LiF/F-doped carbon gradient protection layer on a lithium metal anode by one-step in situ reaction of molten Li with poly(tetrafluoroethylene) (PTFE) is developed. The abundant strong polar C-F bonds in the upper carbon can not only act as Li⁺ capture site to pre-uniform Li⁺ flux but also regulate the electron configuration of LiF to make Li⁺ quasi-spontaneously diffuse from carbon to LiF surface, avoiding the strong Li⁺-adhesion-induced Li aggregation. For LiF, it can behave as fast Li⁺ conductor and homogenize the nucleation sites on lithium, as well as ensure firm connection with lithium. As a result, this well-designed protection layer endows the Li metal anode with dendrite-free plating/stripping and anticorrosion behavior both in ether-based and carbonate ester-based electrolytes. Even applied protected Li anodes in Li−O₂ batteries, its superiority can still be maintained, making the cell achieve stable cycling performance (180 cycles).     

Yolk–Shelled C@Fe3O4 Nanoboxes as Efficient Sulfur Hosts for High‐Performance Lithium–Sulfur Batteries

Owing to the high theoretical specific capacity (1675 mA h g^?1) and low cost, lithium–sulfur (Li–S) batteries offer advantages for next‐generation energy storage. However, the polysulfide dissolution and low electronic conductivity of sulfur cathodes limit the practical application of Li–S batteries. To address such issues, well‐designed yolk–shelled carbon@Fe₃O₄ (YSC@Fe₃O₄) nanoboxes as highly efficient sulfur hosts for Li–S batteries are reported here. With both physical entrapment by carbon shells and strong chemical interaction with Fe₃O₄ cores, this unique architecture immobilizes the active material and inhibits diffusion of the polysulfide intermediates. Moreover, due to their high conductivity, the carbon shells and the polar Fe₃O₄ cores facilitate fast electron/ion transport and promote continuous reactivation of the active material during the charge/discharge process, resulting in improved electrochemical utilization and reversibility. With these merits, the S/YSC@Fe₃O₄ cathodes support high sulfur content (80 wt%) and loading (5.5 mg cm^?2) and deliver high specific capacity, excellent rate capacity, and long cycling stability. This work provides a new perspective to design a carbon/metal‐oxide‐based yolk–shelled framework as a high sulfur‐loading host for advanced Li–S batteries with superior electrochemical properties.     

High‐Performance Integrated Self‐Package Flexible Li–O2 Battery Based on Stable Composite Anode and Flexible Gas Diffusion Layer

With the rising development of flexible and wearable electronics, corresponding flexible energy storage devices with high energy density are required to provide a sustainable energy supply. Theoretically, rechargeable flexible Li–O₂ batteries can provide high specific energy density; however, there are only a few reports on the construction of flexible Li–O₂ batteries. Conventional flexible Li–O₂ batteries possess a loose battery structure, which prevents flexibility and stability. The low mechanical strength of the gas diffusion layer and anode also lead to a flexible Li–O₂ battery with poor mechanical properties. All these attributes limit their practical applications. Herein, the authors develop an integrated flexible Li–O₂ battery based on a high‐fatigue‐resistance anode and a novel flexible stretchable gas diffusion layer. Owing to the synergistic effect of the stable electrocatalytic activity and hierarchical 3D interconnected network structure of the free‐standing cathode, the obtained flexible Li–O₂ batteries exhibit superior electrochemical performance, including a high specific capacity, an excellent rate capability, and exceptional cycle stability. Furthermore, benefitting from the above advantages, the as‐fabricated flexible batteries can realize excellent mechanical and electrochemical stability. Even after a thousand cycles of the bending process, the flexible Li–O₂ battery can still possess a stable open‐circuit voltage, a high specific capacity, and a durable cycle performance.     

Robust,Ultra‐Tough Flexible Cathodes for High‐Energy Li–S Batteries

Sulfur cathodes have become appealing for rechargeable batteries because of their high theoretical capacity (1675 mA h g^?1). However, the conventional cathode configuration borrowed from lithium‐ion batteries may not allow the pure sulfur cathode to put its unique materials chemistry to good use. The solid_(sulfur)–liquid_{(polysulfides)}–solid_(sulfides) phase transitions generate polysulfide intermediates that are soluble in the commonly used organic solvents in Li–S cells. The resulting severe polysulfide diffusion and the irreversible active‐material loss have been hampering the development of Li–S batteries for years. The present study presents a robust, ultra‐tough, flexible cathode with the active‐material fillings encapsulated between two buckypapers (B), designated as buckypaper/sulfur/buckypaper (B/S/B) cathodes, that suppresses the irreversible polysulfide diffusion to the anode and offers excellent electrochemical reversibility with a low capacity fade rate of 0.06% per cycle after 400 cycles. Engineering enhancements demonstrate that the B/S/B cathodes represent a facile approach for the development of high‐performance sulfur electrodes with a high areal capacity of 5.1 mA h cm^?2, which increases further to approach 7 mA h cm^?2 on coupling with carbon‐coated separators.     

Self‐Suppression of Lithium Dendrite in All‐Solid‐State Lithium Metal Batteries with Poly(vinylidene difluoride)‐Based Solid Electrolytes

Polymer‐based electrolytes have attracted ever‐increasing attention for all‐solid‐state lithium (Li) metal batteries due to their ionic conductivity, flexibility, and easy assembling into batteries, and are expected to overcome safety issues by replacing flammable liquid electrolytes. However, it is still a critical challenge to effectively block Li dendrite growth and improve the long‐term cycling stability of all‐solid‐state batteries with polymer electrolytes. Here, the interface between novel poly(vinylidene difluoride) (PVDF)‐based solid electrolytes and the Li anode is explored via systematical experiments in combination with first‐principles calculations, and it is found that an in situ formed nanoscale interface layer with a stable and uniform mosaic structure can suppress Li dendrite growth. Unlike the typical short‐circuiting that often occurs in most studied poly(ethylene oxide) systems, this interface layer in the PVDF‐based system causes an open‐circuiting feature at high current density and thus avoids the risk of over‐current. The effective self‐suppression of the Li dendrite observed in the PVDF–LiN(SO₂F)₂ (LiFSI) system enables over 2000 h cycling of repeated Li plating–stripping at 0.1 mA cm^?2 and excellent cycling performance in an all‐solid‐state LiCoO₂||Li cell with almost no capacity fade after 200 cycles at 0.15 mA cm^?2 at 25 °C. These findings will promote the development of safe all‐solid‐state Li metal batteries.     

Early Lithium Plating Behavior in Confined Nanospace of 3D Lithiophilic Carbon Matrix for Stable Solid‐State Lithium Metal Batteries

Considerable efforts are devoted to relieve the critical lithium dendritic and volume change problems in the lithium metal anode. Constructing uniform Li⁺ distribution and lithium “host” are shown to be the most promising strategies to drive practical lithium metal anode development. Herein, a uniform Li nucleation/growth behavior in a confined nanospace is verified by constructing vertical graphene on a 3D commercial copper mesh. The difference of solid‐electrolyte interphase (SEI) composition and lithium growth behavior in the confined nanospace is further demonstrated by in‐depth X‐ray photoelectron spectrometer (XPS) and line‐scan energy dispersive X‐ray spectroscopic (EDS) methods. As a result, a high Columbic efficiency of 97% beyond 250 cycles at a current density of 2 mA cm^?2 and a prolonged lifespan of symmetrical cell (500 cycles at 5 mA cm^?2) can be easily achieved. More meaningfully, the solid‐state lithium metal cell paired with the composite lithium anode and LiNi_0.5Co_0.2Mn_0.3O₂ (NCM) as the cathode also demonstrate reduced polarization and extended cycle. The present confined nanospace–derived hybrid anode can further promote the development of future all solid‐state lithium metal batteries.     

A High‐Performance Li–O2 Battery with a Strongly Solvating Hexamethylphosphoramide Electrolyte and a LiPON‐Protected Lithium Anode

The aprotic Li–O₂ battery has attracted a great deal of interest because theoretically it can store more energy than today's Li‐ion batteries. However, current Li–O₂ batteries suffer from passivation/clogging of the cathode by discharged Li₂O₂, high charging voltage for its subsequent oxidation, and accumulation of side reaction products (particularly Li₂CO₃ and LiOH) upon cycling. Here, an advanced Li–O₂ battery with a hexamethylphosphoramide (HMPA) electrolyte is reported that can dissolve Li₂O₂, Li₂CO₃, and LiOH up to 0.35, 0.36, and 1.11 × 10^?3m , respectively, and a LiPON‐protected lithium anode that can be reversibly cycled in the HMPA electrolyte. Compared to the benchmark of ether‐based Li–O₂ batteries, improved capacity, rate capability, voltaic efficiency, and cycle life are achieved for the HMPA‐based Li–O₂ cells. More importantly, a combination of advanced research techniques provide compelling evidence that operation of the HMPA‐based Li–O₂ battery is backed by nearly reversible formation/decomposition of Li₂O₂ with negligible side reactions.     

Additive‐Assisted Novel Dual‐Salt Electrolyte Addresses Wide Temperature Operation of Lithium–Metal Batteries

In this study, self‐synthesized lithium trifluoro(perfluoro‐tert‐butyloxyl)borate (LiTFPFB) is combined with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) to formulate a novel 1 m dual‐salt electrolyte, which contains lithium difluorophosphate (LiPO₂F₂) additive and dominant carbonate solvents with low melting point and high boiling point. The addition of LiPO₂F₂ into this novel dual‐salt electrolyte dramatically improves cycleability and rate capability of a LiNi_0.5Mn_0.3Co_0.2O₂/Li (NMC/Li) battery, ranging from ?40 to 90 °C. The NMC/Li batteries adopt a Li–metal anode with low thickness of 100 µm (even 50 µm) and a moderately high cathode mass loading level of 10 mg cm^?2. For the first time, this paper provides valuable perspectives for developing practical lithium–metal batteries over a wide temperature range.     

Intercalating Ti2Nb14O39 Anode Materials for Fast‐Charging,High‐Capacity and Safe Lithium–Ion Batteries

Ti–Nb–O binary oxide materials represent a family of promising intercalating anode materials for lithium‐ion batteries. In additional to their excellent capacities (388–402 mAh g^–1), these materials show excellent safety characteristics, such as an operating potential above the lithium plating voltage and minimal volume change. Herein, this study reports a new member in the Ti–Nb–O family, Ti₂Nb₁₄O₃₉, as an advanced anode material. Ti₂Nb₁₄O₃₉ porous spheres (Ti₂Nb₁₄O₃₉‐S) exhibit a defective shear ReO₃ crystal structure with a large unit cell volume and a large amount of cation vacancies (0.85% vs all cation sites). These morphological and structural characteristics allow for short electron/Li⁺‐ion transport length and fast Li⁺‐ion diffusivity. Consequently, the Ti₂Nb₁₄O₃₉‐S material delivers significant pseudocapacitive behavior and excellent electrochemical performances, including high reversible capacity (326 mAh g^?1 at 0.1 C), high first‐cycle Coulombic efficiency (87.5%), safe working potential (1.67 V vs Li/Li⁺), outstanding rate capability (223 mAh g^–1 at 40 C) and durable cycling stability (only 0.032% capacity loss per cycle over 200 cycles at 10 C). These impressive results clearly demonstrate that Ti₂Nb₁₄O₃₉‐S can be a promising anode material for fast‐charging, high capacity, safe and stable lithium‐ion batteries.     

A 3D and Stable Lithium Anode for High‐Performance Lithium–Iodine Batteries

Lithium metal is considered as the most promising anode material due to its high theoretical specific capacity and the low electrochemical reduction potential. However, severe dendrite problems have to be addressed for fabricating stable and rechargeable batteries (e.g., lithium–iodine batteries). To fabricate a high‐performance lithium–iodine (Li–I₂) battery, a 3D stable lithium metal anode is prepared by loading of molten lithium on carbon cloth doped with nitrogen and phosphorous. Experimental observations and theoretical calculation reveal that the N,P codoping greatly improves the lithiophilicity of the carbon cloth, which not only enables the uniform loading of molten lithium but also facilitates reversible lithium stripping and plating. Dendrites formation can thus be significantly suppressed at a 3D lithium electrode, leading to stable voltage profiles over 600 h at a current density of 3 mA cm^?2. A fuel cell with such an electrode and a lithium–iodine cathode shows impressive long‐term stability with a capacity retention of around 100% over 4000 cycles and enhanced high‐rate capability. These results demonstrate the promising applications of 3D stable lithium metal anodes in next‐generation rechargeable batteries.     

Solid/Solid Interfacial Architecturing of Solid Polymer Electrolyte–Based All‐Solid‐State Lithium–Sulfur Batteries by Atomic Layer Deposition

Solid polymer electrolytes (SPEs)‐based all‐solid‐state lithium–sulfur batteries (ASSLSBs) have attracted extensive research attention due to their high energy density and safe operation, which provide potential solutions to the increasing need for harnessing higher energy densities. There is little progress made, however, in the development of ASSLSBs to improve simultaneously energy density and long‐term cycling life, mostly due to the “shuttle effect” of lithium polysulfide intermediates in the SPEs and the low interfacial compatibility between the metal lithium anode and the SPE. In this work, the issues of solid/solid interfacial architecturing through atomic layer deposition of Al₂O₃ on poly(ethylene oxide)‐lithium bis(trifluoromethanesulfonyl)imide SPE surface are effectively addressed. The Al₂O₃ coating promotes the suppression of lithium dendrite formation for over 500 h. ASSLSBs fabricated with two layers of Al₂O₃‐coated SPE deliver high gravimetric/areal capacity and Coulombic efficiency, as well as excellent cycling stability and extremely low self‐discharge rate. This work provides not only a simple and effective approach to boost the electrochemical performances of SPE‐based ASSLSBs, but also enriches the fundamental understanding regarding the underlying mechanism responsible for their performance.     

Porous Carbon Nanofibers Encapsulated with Peapod‐Like Hematite Nanoparticles for High‐Rate and Long‐Life Battery Anodes

Fe₂O₃ is regarded as a promising anode material for lithium‐ion batteries (LIBs) and sodium‐ion batteries (SIBs) due to its high specific capacity. The large volume change during discharge and charge processes, however, induces significant cracking of the Fe₂O₃ anodes, leading to rapid fading of the capacity. Herein, a novel peapod‐like nanostructured material, consisting of Fe₂O₃ nanoparticles homogeneously encapsulated in the hollow interior of N‐doped porous carbon nanofibers, as a high‐performance anode material is reported. The distinctive structure not only provides enough voids to accommodate the volume expansion of the pea‐like Fe₂O₃ nanoparticles but also offers a continuous conducting framework for electron transport and accessible nanoporous channels for fast diffusion and transport of Li/Na‐ions. As a consequence, this peapod‐like structure exhibits a stable discharge capacity of 1434 mAh g^?1 (at 100 mA g^?1) and 806 mAh g^?1 (at 200 mA g^?1) over 100 cycles as anode materials for LIBs and SIBs, respectively. More importantly, a stable capacity of 958 mAh g^?1 after 1000 cycles and 396 mAh g^?1 after 1500 cycles can be achieved for LIBs and SIBs, respectively, at a large current density of 2000 mA g^?1. This study provides a promising strategy for developing long‐cycle‐life LIBs and SIBs.     

Protecting the Li‐Metal Anode in a Li–O2 Battery by using Boric Acid as an SEI‐Forming Additive

The Li–O₂ battery (LOB) is considered as a promising next‐generation energy storage device because of its high theoretic specific energy. To make a practical rechargeable LOB, it is necessary to ensure the stability of the Li anode in an oxygen atmosphere, which is extremely challenging. In this work, an effective Li‐anode protection strategy is reported by using boric acid (BA) as a solid electrolyte interface (SEI) forming additive. With the assistance of BA, a continuous and compact SEI film is formed on the Li‐metal surface in an oxygen atmosphere, which can significantly reduce unwanted side reactions and suppress the growth of Li dendrites. Such an SEI film mainly consists of nanocrystalline lithium borates connected with amorphous borates, carbonates, fluorides, and some organic compounds. It is ionically conductive and mechanically stronger than conventional SEI layer in common Li‐metal‐based batteries. With these benefits, the cycle life of LOB is elongated more than sixfold.